Investigating the thermal,mechanical and thermal cyclic properties of plasma-sprayed Al2O3-7YSZ/7YSZ double ceramic layer TBCs

Double ceramic layer (DCL) TBCs consisting of a top 20 wt.% Al₂O₃-7YSZ layer and a bottom 7YSZ layer were desirably designed to achieve preferable performance while the thermal, mechanical and thermal cyclic properties were comprehensively investigated. Compared to the conventional 7YSZ TBCs, the thermal insulation properties of the DCL coating were significantly improved due to the increased oxygen vacancy concentration induced by Al₂O₃ addition while the thickness of the thermally grown oxides was diminished by the decreased oxygen diffusion rate. Furthermore, the improved fracture toughness of the DCL coating also prolonged the thermal cyclic life.     

Effect of Al2O3 addition on bioactivity,thermal and mechanical properties of some bioactive glasses

Three bio-phosphate glass-specimens with and without Al₂O₃ addition were prepared in order to shed light on their bioactivity behavior towards the simulated body fluid biological solution (SBF). The results revealed that Al₂O₃ has significant effect on the ability of bio-glass to form the hydroxycarbonate apatite layer on its surface. That layer was detected by FTIR spectra, SEM micrographs and EDAX pattern. Also, the effect of Al₂O₃ on the mechanical properties was studied by measuring the hardness of the glass samples, which increased by Al₂O₃ addition. The thermal expansion coefficient was decreased by increasing the Al₂O₃ percent in the bio-glass samples.     

A novel design of Al2O3-ZrO2 reticulated porous ceramics with hierarchical pore structures and excellent properties

The use of reticulated porous ceramics(RPCs) was of great interest in high-temperature catalytic application owing to their high surface area. In order to further optimize the pore structure and mechanical properties of RPCs, vacuum infiltration with CaCO₃-Al₂O₃ slurries process was applied to fabricate Al₂O₃-ZrO₂ RPCs with hierarchical pore structures. The pores within ceramic struts were prepared by processes of CaCO₃ decomposition and calcium hexaluminate grains growth. And the compressive residual stress was formed within multi-layered struts owing to the difference in the thermal expansion of coating layer and ceramic struts, which was established as a key factor in improving the mechanical properties and thermal shock resistance of RPCs. Furthermore, the size of pores within struts ranging from 5 μm to 14 μm affected the thermal shock resistance of RPCs significantly based on grey incidence analysis. And the potential of this materials as high-temperature catalyst supports was demonstrated.     

Aluminum borate whisker-based lattices with a hierarchical pore structure obtained via digital light processing

To satisfy the ever-increasing demand for aluminum borate porous ceramics with complex shapes and tunable pore structures in a diverse set of fields, aluminum borate whisker-based lattices with hierarchical pore structures were fabricated by a combination of in situ reaction and digital light processing three-dimensional (3D) printing. The optimal dispersant concentration and exposure parameters for 3D printing were determined based on analyses of the rheological properties and working curves of the Al₂O₃–B₂O₃ photosensitive slurries. The effects of the B₂O₃/Al₂O₃ molar ratio on the morphology and properties of aluminum borate lattices were investigated. The results showed that the addition of an excess of B₂O₃ was beneficial to the growth of aluminum borate whiskers. When the B₂O₃/Al₂O₃ molar ratio was set to 6:9, the resultant aluminum borate lattices exhibited a typical hierarchical pore structure, including inherent large pores in the lattices and small pores formed by interlocked aluminum borate whiskers generated in situ within the struts. This unique hierarchical pore structure endowed the ceramic lattices with a high compressive strength (1.18 MPa) and porosity (82.58%), as well as non-brittle fracture characteristics. Owing to these outstanding properties, aluminum borate whisker-based lattices are promising candidates for high-temperature thermal insulation, catalyst supports, acoustic absorption, and particle filtration.     

Tribological properties of selected ceramic coatings

The paper presents the characteristics of some ceramic coatings obtained by a plasma spray method. The ceramic coatings Al₂O₃, Cr₂O₃ and Cr₂O₃?+?5% TiO₂ were evaluated. Also the influence of the NiCr interlayer on the functional properties of sprayed coatings was studied. Other parameters studied included: thickness; microhardness; adhesion of the coatings; resistance to abrasive wear and thermal cyclic loading. The addition of TiO₂ to the Cr₂O₃ material increased the coating density, but did not substantially reduce the hardness. On the other hand, the lowest loss of material thickness was seen for Cr₂O₃; while the Al₂O₃ and the Cr₂O₃?+?5 wt.% TiO₂ material showed a higher loss. The loss in the case of the latter two was about the same. Relatively, higher values of abrasive wear resistance were observed in the Cr₂O₃ coatings, as compared to the reference material (Al₂O₃ coating), and the highest microhardness values were measured in the Cr₂O₃ coating. Finally, the metal interlayers in all coatings increased their resistance to thermal shock. All the coatings, using the interlayer to reduce differences in coefficients of thermal expansion, were suitable for the purpose of the thermal loading up to 1000?°C.     

Evaluation of hot corrosion behavior of CSZ,CSZ/micro Al2O3 and CSZ/nano Al2O3 plasma sprayed thermal barrier coatings

Hot corrosion is one of the main destructive factors in thermal barrier coatings (TBCs) which come as a result of molten salt effect on the coating–gas interface. Hot corrosion behavior of three types of plasma sprayed TBCs was evaluated: usual CSZ, layer composite of CSZ/Micro Al₂O₃ and layer composite of CSZ/Nano Al₂O₃ in which Al₂O₃ was as a topcoat on CSZ layer. Hot corrosion studies of plasma sprayed thermal barrier coatings (TBCs) were conducted in 45 wt% Na₂SO₄+55 wt% V₂O₅ molten salt at 1050 °C for 40 h. The graded microstructure of the coatings was examined using scanning electron microscope (SEM) and X-ray diffractometer (XRD) before and after hot corrosion test. The results showed that no damage and hot corrosion products was found on the surface of CSZ/Nano Al₂O₃ coating and monoclinic ZrO₂ fraction was lower in CSZ/Micro Al₂O₃ coating in comparison with usual CSZ. reaction of molten salts with stabilizers of zirconia (Y₂O₃ and CeO₂) that accompanied by formation of monoclinic zirconia, irregular shape crystals of YVO₄, CeVO₄ and semi-cubic crystals of CeO₂ as hot corrosion products, caused the degradation of CSZ coating in usual CSZ and CSZ/Micro Al₂O₃ coating.     

Enhanced performance of low-carbon MgO–C refractories with nano-sized ZrO2–Al2O3 composite powder

Low-carbon MgO–C refractories are facing great challenges with severe thermal shock and slag corrosion in service. Here, a new approach, based on the incorporation of nano-sized ZrO₂–Al₂O₃ composite powder, is proposed to enhance the thermal shock resistance and slag resistance of such refractories in this work. The results showed that addition of ZrO₂–Al₂O₃ composite powder was helpful for improving their comprehensive performances. Particularly, the thermal shock resistance of the specimen containing 0.5 wt% composite powder was enhanced significantly which was related to the transformation toughening of zirconia and in-situ formation of more spinel phases in the matrix; also, the slag resistance of the corresponding specimen was significantly improved, which was attributed to the optimization of pore structure and formation of much thicker MgO dense layer.     

Catalytic oxide coatings on ceramic supports

Thin porous oxide coatings composed of Al₂O₃, SiO₂, TiO₂ and ZrO₂, respectively, on ceramic carriers have been produced by either a wash-coat procedure or by liquid coating followed by solidification. By dehydration and calcination of the supported ceramics the pore texture was stabilised. The thickness of the layer, its homogeneity, specific surface area, porosity and pore volume distribution have been shown to be controlled by the properties of the oxides deposited, and by the conditions of the coating procedures. On the basis of the results obtained, it is evident that porous oxide layers can be prepared with tailor-made and desired properties. The procedures described also permit the incorporation of catalytic components (e.g. CuO) into the layer.     

An evaluation of plasma-sprayed coatings based on Al2O3 and Al2O3–13 wt.% TiO2 with bond coat on pure titanium substrate

In this study, the effects of bond coat on the properties of Al₂O₃ and Al₂O₃–13 wt.% TiO₂ coatings, which is plasma sprayed onto a commercial pure titanium substrate with and without Ni–5 wt.% Al (METCO 450 NS) as bond coating layer were investigated in terms of microhardness, bonding strength and surface roughness. Optical and scanning electron microscopy (SEM) examinations revealed that there is a uniform coating layer with no spalling and delamination. However, there is a little amount of porosity. The results indicated that the application of bond coat layer in the plasma spraying of Al₂O₃ and Al₂O₃–13 wt.% TiO₂ on pure titanium substrate has increased the hardness and bonding strength of coatings. While the adhesive bonding is dominant without bond coat, the cohesive bonding is dominant with the application of the bond coating layer. It has been observed that percentage of cohesion strength was about three times higher than that of adhesion strength.     

Feasibility research of Yb3Al5O12 garnet as environmental barrier coating materials

In this work, Yb₃Al₅O₁₂ (YbAG) garnet, as a new material for environment barrier coating (EBC) application, was synthesized and prepared by atmospheric plasma spraying (APS). The phases and microstructures of the coatings were characterized by XRD, EDS and SEM, respectively. The thermal stability was measured by TG-DSC. The mechanical and thermal-physical properties, including Vickers hardness (H_v), fracture toughness (K_IC), Young's modulus (E), thermal conductivity (κ) and coefficient of thermal expansion (CTE) were also measured. The results showed that the as-sprayed coating was mainly composed of crystalline Yb₃Al₅O₁₂ and amorphous phase which crystallized at around 917 °C. Moreover, it has a hardness of 6.81 ± 0.23 GPa, fracture toughness of 1.61 ± 0.18 MPa m^1/2, as well as low thermal conductivity (0.82–1.37 W/m·K from RT-1000 °C) and an average coefficient of thermal expansion (CTE) (∼6.3 × 10⁻⁶ K⁻¹ from RT to 660 °C). In addition, the thermal shock and water-vapor corrosion behaviors of the Yb₃Al₅O₁₂-EBC systems on the SiC_f/SiC substrates were investigated and their failure mechanisms were analyzed in details. The Yb₃Al₅O₁₂ coating has an average thermal shock lifetime of 72 ± 10 cycles as well as an excellent resistance to steam. These combined properties indicated that the Yb₃Al₅O₁₂ coating might be a potential EBC material. Both the thermal shock failure and the steam recession of the Yb₃Al₅O₁₂-EBC systems are primarily associated with the CTE mismatch stress.     

Preparation of Al2O3 coating on TiN coating by polymer-assisted deposition to improve oxidation resistance in coking inhibition applications

In order to inhibit the metal catalytic coking and improve oxidation resistance of single TiN coating, the TiN/Al₂O₃ double layer coatings were designed as a chemically inert coating for methylcyclohexane supercritical pyrolysis. Internal TiN coatings were prepared by atmospheric pressure chemical vapor deposition using TiCl₄–H₂–N₂ system. The external Al₂O₃ coatings with different thicknesses were prepared on the TiN surface by polymer-assisted deposition, and the coating with the most suitable thickness was further annealed at different temperatures of 600, 700, 800 and 900 °C. The morphology, elemental and phase composition of TiN/Al₂O₃ coatings were characterized by SEM, EDX and XRD respectively. The chemical state information of the coating elements was based on Ti 2p, Al 2p core level X-ray photoelectron spectroscopy (XPS) spectra. The results indicated that the external Al₂O₃ coating will partially peel off at 900 °C annealing temperature. The thermogravimetric analysis results indicated that all TiN/Al₂O₃ coatings show better oxidation resistance than single-layer TiN coating. The anti-coking test with methylcyclohexane supercritical pyrolysis showed that the TiN/Al₂O₃ coatings can effectively cover the metal catalytic sites and eliminate metal catalytic coking. However, the acid sites of external Al₂O₃ coating slightly promoted coking, so the anti-coking ratios of TiN/Al₂O₃ coatings were smaller than that of TiN. Thus, the addition of external Al₂O₃ coating can greatly improve the oxidation resistance of TiN coatings with little loss of coking resistance.     

Thermal Stability and Ionic Conductivity of Calcia‐Stabilized Zirconia with Alumina Addition

The thermal expansion and ionic conduction of 15 mol% CaO‐stabilized zirconia (CSZ) with added Al₂O₃ were investigated. Specimens with 0.5 and 1 mol% Al₂O₃ maintained the cubic phase, and the thermal diffusivity increased from 0.499 to 0.661 mm²/s with a 1 mol% addition. The addition of 5 mol% caused a decrease in the thermal diffusivity (0.609 mm²/s) with the formation of the monoclinic phase. The thermal expansion coefficient of the CSZ decreased, and the thermal diffusivity increased with the addition of Al₂O₃. The ionic conductivity was increased up to the addition of 1 mol% due to scavenging of siliceous by Al₂O₃, while the 5 mol% addition showed a decrease in conductivity with the formation of the intergranular phase.     

Nickel–alumina graded coatings obtained by dipping and EPD on nickel substrates

Nickel substrates have been coated by Ni/Al₂O₃ composite films by a dipping process using aqueous suspensions that contain a temporary binder. Two-layer and three-layer graded coatings have been produced, consisting of pure Ni powder and Ni/Al₂O₃ composites with Al₂O₃ contents of 15 and 30 vol.% as intermediate layers to release sintering and thermal stresses. The laminates were further coated with a ceramic layer of Al₂O₃/ZrO₂ that was deposited by electrophoretic deposition using a non-aqueous suspension. A continuous, thin Al₂O₃ layer surrounding Ni grains developed at the intermediate composite layer of Ni/Al₂O₃ allows the ceramic coating to maintain strongly adhered to the nickel substrate by means of a porous substrate/coating interface.     

Preparation of nano-Al2O3 dispersion strengthened coating via coating-substrate co-sintering and underwater shock wave compaction

This paper aims at developing a process technology to fabricate an aluminum dispersion strengthened coating on a copper substrate. First, nanostructured Cu–Al₂O₃ powder was prepared by hydrogen-reduction of mechanical alloyed Cu and Al₂O₃ mixed powders. Low-density coating was then achieved through die pressing and pre-co sintering. Finally, dynamic consolidation by underwater shock wave was used to densify the Cu–Al₂O₃ sintering body, ensuring strong bonding between the coating and substrate. The compressing process was simulated using the commercially available package LS-DYNA. Numerical simulation gave deformation of the coating layer and pressure distribution during the compressing process. Microstructure characteristics indicate that the coating layer has a uniform and fine-grained composite structure and a strong surface bonding between coating layer and copper substrate. The fracture surface, analyzed by SEM, showed intergranular fracturing. Measurement of hardness showed a high hardness value, indicating sound mechanical properties of the coating layer. This method has thus been proven feasible for preparation of aluminum dispersion strengthened coating on copper substrate.     

Preparation and properties of porous SiC–Al2O3 ceramics using coal ash

In this paper, we first reported that porous SiC–Al₂O₃ ceramics were prepared from solid waste coal ash, activated carbon, and commercial SiC powder by a carbothermal reduction reaction (CRR) method under Ar atmosphere. The effects of addition amounts of SiC (0, 10, 15, and 20 wt%) on the postsintering properties of as-prepared porous SiC–Al₂O₃ ceramics, such as phase composition, microstructure, apparent porosity, bulk density, pore size distribution, compressive strength, thermal shock resistance, and thermal diffusivity have been investigated. It was found that the final products are β-SiC and α-Al₂O₃. Meanwhile, the SEM shows the pores distribute uniformly and the body gradually contacts closely in the porous SiC–Al₂O₃ ceramics. The properties of as-prepared porous SiC–Al₂O₃ ceramics were found to be remarkably improved by adding proper amounts of SiC (10, 15, and 20 wt%). However, further increasing the amount of SiC leads to a decrease in thermal shock resistance and mechanical properties. Porous SiC–Al₂O₃ ceramics doped with 10 wt% SiC and sintered at 1600°C for 5 hours with the median pore diameter of 4.24 μm, room-temperature compressive strength of 21.70 MPa, apparent porosity of 48%, and thermal diffusivity of 0.0194 cm²/s were successfully obtained.     

Fabrication of Al2O3/AlN composite ceramics with enhanced performance via a heterogeneous precipitation coating process

To improve the thermal and mechanical properties of Al₂O₃/AlN composite ceramics, a novel heterogeneous precipitation coating (HPC) approach was introduced into the fabrication of Al₂O₃/AlN ceramics. For this approach, Al₂O₃ and AlN powders were coated with a layer of amorphous Y₂O₃, with the coated Al₂O₃ and AlN powders found to favor the formation of an interconnected YAG second phase along the grain boundaries. The interconnected YAG phase was designed to act as a diffusion barrier layer to minimize the detrimental interdiffusion between Al₂O₃ and AlN particles. Compared with samples prepared by a conventional ball-milling method, the HPC Al₂O₃/AlN composites exhibited less AlON formation, a higher relative density, a smaller grain size and a more homogeneous microstructure. The thermal conductivity, bending strength, fracture toughness and Weibull modulus of the HPC Al₂O₃/AlN composite ceramics were found to reach 34.21 ± 0.34 W m⁻¹ K⁻¹, 475.61 ± 21.56 MPa, 5.53 ± 0.29 MPa m^1/2 and 25.61, respectively, which are much higher than those for the Al₂O₃ and Al₂O₃/AlN samples prepared by the conventional ball-milling method. These results suggest that HPC is a more effective technique for preparing Al₂O₃/AlN composites with enhanced thermal and mechanical properties, and is probably applicable to other composite material systems as well.     

Al2O3/CrAlSiN multilayer coating deposited using hybrid magnetron sputtering and atomic layer deposition

In this study, Al₂O₃/CrAlSiN multilayer coatings with various periods were prepared using a hybrid process involving overlapping magnetron sputtering of CrAlSiN and atomic layer deposition (ALD) of Al₂O₃. The influence of the number of Al₂O₃ layers on the mechanical properties, corrosion behavior and oxidation characteristics of the coatings was studied using nano/micro indentation, electrochemical corrosion, and high temperature static oxidation tests. The results show that the multilayer structure can effectively prevent crack propagation during the coating and subsequently increase the coating toughness. A substantial improvement in the resistance to electrochemical and oxidation corrosion was observed in the Al₂O₃/CrAlSiN multilayer coatings and increasing the number of Al₂O₃ layers dramatically increases the corrosion durability. The Al₂O₃ ALD layers are expected to inhibit the diffusion of corrosive substances such as ions and oxygen and the increase of the Al₂O₃ layer number decreases the diffusion fluxes of the coating elements to the surface and limit the oxide growth, resulting in the evolution of the oxidation produces from irregular particles to nano-walls/fibers. It is supposed that the PVD/ALD hybrid process may open a new hard coating design concept by providing a superior toughness and corrosion/oxidation resistance.     

Preparation of Al2O3@CaCO3 aggregates and its effects on the thermal shock resistance of Al2O3-MgO castables

Al₂O₃@CaCO₃ aggregates were prepared by impregnating corundum aggregates (particle sizes with 3-1 and 5-3 mm) in precursor solutions (Calcium hydrogen citrate, CaHC₆H₅O₇) followed by heat treatment at 430°C. The phase composition and microstructure of the coatings were characterized via X-ray diffraction and scanning electron microscope, respectively. The novel aggregates were used in Al₂O₃-MgO castables. The effects of the Al₂O₃@CaCO₃ aggregates on the physical properties and thermal shock resistance (TSR) of castables were investigated. The results show that uniform CaCO₃ coating of aggregates (C15) with thickness about 10 µm can be attained when the concentration of Ca²⁺ in solution was 0.15 mol L⁻¹. There was a strong bonding between the aggregates and coating that was constituted by particles with size about 0.2 µm. Both improving physical and TSR properties of the castables are related with the unique layer structure, calcium hexaluminate (CA₆) layer in-situ formed at the aggregate-matrix interface, of added Al₂O₃@CaCO₃ aggregates. There is a mass of multi-deflection of cracks along with the CA₆ layer which consumes more fracture surface energy. The castables with C15 exhibit optimal TSR and the residual strength ratio after the thermal shock test is 29.5%, which is 12.8% higher than the castables with corundum aggregates.     

Influence of Ca/Al ratio on physical and dielectric properties of Al2O3/CaO-B2O3-SiO2 glass-ceramics composite coatings prepared by high enthalpy atmospheric plasma spraying

The dielectric layer plays a key role in regulating electromagnetic wave broadband scattering based on meta-surface technology. Herein, the physical properties of composite powder, prepared by spray drying of CaO-B₂O₃-SiO₂ (CBS) glass-ceramic powder and Al₂O₃ in different mass ratios, are systematically investigated. Meanwhile, a high enthalpy atmospheric plasma spraying equipment is utilized to prepare CBS/Al₂O₃ composite coatings, and the morphology, physical properties and dielectric properties of the composite coating are analyzed. The XRD and DSC data of the composite coating reveal that the crystallization behavior of β-CaSiO₃ and CaB₂O₄ gradually disappear with the increase of Al₂O₃ content. Hence, only CaAl₂Si₂O₈ phase is observed during heat treatment. The experimental results confirm that the dielectric properties of CBS/Al₂O₃ composite coating conform to the rule of mixture for composite materials. Also, the dielectric properties are affected by porosity and crystallization rate.