一种密钥传输方案的分析和改进

分析了一种基于前置秘密共享的密钥传输方案.该方案在接收方的前置份额不变情况下,发送方通过在每次通信中使用不同的激活份额来产生不同的密钥.首先指出该方案的三个安全缺陷并给出分析过程;然后,对该方案进行改进,采用可验证秘密共享以及数字签名技术,提出了一种新的抗发送者欺骗、接收者欺骗和篡改攻击的密钥传输协议,有效地解决了原方案中的安全问题,避免了原方案的不足,具有更高安全性.     

基于RSA密码体制（t，n）门限秘密共享方案

基于RSA密码体制,提出了一个新的(t,n)门限秘密共享方案.在该方案中,秘密份额由各参与者自己选择,秘密分发者不知道每个参与者所持有的份额,而且秘密份额长度与秘密长度相同.在秘密恢复过程中,每个参与者能够验证其他参与者是否进行了欺骗.每个参与者只需维护一个秘密份额,就可以实现对多个秘密的共享.方案的安全性是基于RSA密码体制和Shamir的(t,n)门限秘密共享方案的安全性.     

基于ECO的可公开验证的多秘密共享方案

基于椭圆曲线密码体制，提出了一个新的可公开验证的多秘密共享方案。该方案中，参与者和分发者可同时产生各参与者的秘密份额，可同时防止分发者和参与者进行欺骗。在秘密恢复过程中，任何个体都能验证参与者是否拥有有效的子秘密，秘密恢复者可验证参与者是否提供了正确的秘密份额。每个参与者只需要维护一个秘密份额，就可以实现对多个秘密的共享。方案的安全性是基于椭圆曲线密码体制以及（t，n）门限秘密共享体制的安全性。     

一种无纠缠态的量子秘密共享协议

秘密共享是指将一个秘密按适当的方式进行隐藏或拆分,只有若干个参与者一同协作才能恢复该秘密,该技术在云计算领域中能够确保信息安全和数据保密.提出了一种不使用纠缠态的量子秘密共享协议,通过使用量子密码算法确保系统的安全性.相比其他的秘密共享协议,该协议具有以下优点:与传统的基于数论的秘密共享协议相比,本协议由于使用量子通信的技术,从而能够有效抵抗Shor算法攻击;相比其他的量子秘密共享协议,由于本协议没有使用量子纠缠态,在技术程度上更容易实现;如果存在攻击者或恶意的参与者,该协议能够在秘密恢复过程中迅速发现,避免恢复错误的秘密.     

基于随机网格的视觉多秘密共享方案

为了提高视觉秘密共享(VSS)的恢复效果,该文提出一种基于随机网格的视觉多秘密共享方案.通过使用一种基于圆柱面的随机网格阈值多秘密图像共享方案,使得用户一次可以共享多个秘密图像;部分份额图像受到篡改仍然可以恢复秘密图像,具有较好的鲁棒性;同时份额的数量和最后恢复图像的视觉质量成正相关.仿真结果表明所提出的多秘密视觉共享...     

基于RSA密码体制（t，n）门限秘密共享方案

基于RSA密码体制,提出了一个新的(t,n)门限秘密共享方案。在该方案中,秘密份额由各参与者自己选择,秘密分发者不知道每个参与者所持有的份额,而且秘密份额长度与秘密长度相同。在秘密恢复过程中,每个参与者能够验证其他参与者是否进行了欺骗。每个参与者只需维护一个秘密份额,就可以实现对多个秘密的共享。方案的安全性是基于RSA密码体制和Shamir的(t,n)门限秘密共享方案的安全性。     

基于秘密认证的可验证量子秘密共享协议

该文针对量子秘密共享协议难以抵抗内部成员欺骗攻击的问题,采用秘密认证的方法提出可验证量子秘密共享协议的一般性模型,基于Bell态双粒子变换提出一种新验证算法,并以此给出一个新的可验证量子秘密共享协议.与现有的量子秘密共享协议的验证算法相比,新验证算法既能有效抵抗内部成员欺骗攻击等典型的攻击策略,又可大幅提升协议效率,而且可以与现有量子秘密共享协议相结合,具备很好的可扩展性.     

基于双线性对的可验证的理性秘密共享方案

 针对传统秘密共享方案不能事先预防参与者欺骗的问题,本文结合博弈论,提出了一种理性秘密共享方案,该方案基于双线性对,是可验证的,能检验参与者的欺骗行为.秘密分发者不需要进行秘密份额的分配,因此很大程度上提高了秘密分发的效率.在密钥重构阶段,不需要可信者参与.参与者偏离协议没有遵守协议的收益大,理性的参与者有动机遵守协议,最终每位参与者公平的得到秘密.另外,所提方案可以防止至多m-1成员合谋.经过分析它们是安全和有效的.     

基于LDPC码的秘密共享方案

信息安全保密已成为当今信息时代的重要研究课题,因此秘密共享方案应运而生.在秘密共享方案中,利用LDPC码的编码实现秘密份额的分发,在LDPC码中,每一个非零码字都是极小码字,将秘密共享方案里的极小授权集与LDPC码的极小码字联系起来,通过极小授权集,实现秘密的重构.由于秘密份额在信道中传输会受到影响,所以恢复出来的秘密存在误码,所以利用一步大数逻辑译码纠错.实验表明,此方案实现了秘密分享,安全性高,又简单可行.     

一种门限代理签名方案的分析与改进

通过对Qian-cao-xue的基于双线性映射的的门限代理签名方案分析,发现该方案并不满足强不可伪造性,任何人包括原始签名人可以伪造一个有效的代理签名,同时该方案也不能抵抗原始签名人改变攻击.在此基础上提出了改进的门限代理签名方案(方案1),改进的方案克服了原方案的安全缺陷.并把矢量空间秘密共享和多重代理签名结合起来,构建了一种更为广泛的基于访问结构的多重代理签名(方案2).门限代理签名方案(方案1)成为方案2的特殊情形.方案2中任何参与者的授权子集能产生多重代理签名,而非参与者不可能产生有效的多重代理签名,接收者可以通过验证方法验证个体代理签名和多重代理签名的合法性,而且能保证任何参与者都能检测出错误的子秘密.能抵御各种可能的攻击.     

On a wing and a prayer

Aircraft giants Boeing and Airbus are pinning their hopes on very different visions of how air travel will evolve in the coming decade.     

一年之间，物换星移

去年的这个时候,供货商们还在为生存而挣扎。如今,2009年的年报已经公布,许多供应商的年报业绩之好,就连最乐观的分析师也始料未及。这种变化的原因很简单：供应商们大幅削减成本,接下来是强劲的需求,这又导致了随后高企的设备利用率。     

Building a in a flash supercomputer

A flash mob is a group of strangers, organized over the Internet, that comes together briefly, acts out a predetermined scenario-often something as simple as clapping for 30 seconds-and then disperses. A supercomputer is a very fast and powerful computer that outperforms most mainframes, at a cost, typically, of millions of dollars. Can a flash mob build a supercomputer? It can sure try, and so it did on 3 April at the University of San Francisco's Koret athletic center. The goal was to run the Linpack benchmark, a standard method of assessing the speed of supercomputers, to achieve a speed of at least 403 gigaflops (billion floating point operations per second). This would be fast enough to earn the system a place on the list of the world's fastest 500 supercomputers. The goal was not reached. The group reached just 180 gigaflops before it was time to pack up the computers and go home. However, even though the San Francisco effort fell short of speed goal, it did ignite imaginations.     

Cooperative control of a human and a robot manipulator for positioning a cart on a frictionless plane

Robots may be expected to execute some tasks in cooperation with humans. Control systems for such robots should be appropriate to adapt to human characteristics in order to successfully accomplish the task. Pushing a cart on a frictionless plane in cooperation with a human is a basic example to such a task. To control the motion of an object from one point to another on a frictionless plane is impossible by only pushing in one direction without supporting it in the opposite direction, since as soon as the force is applied, the object will move without stopping its motion. In this paper, compliant cooperative positioning of a cart on a frictionless plane by a human and a manipulator is proposed using impedance control method with the parameters obtained from human–human cooperation.     

Analysis of a coaxial-to-waveguide adaptor including a discendedprobe and a tuning post

A field matching analysis of a coaxial-to-waveguide adaptor incorporating a disc-ended probe and a tuning post is presented. In this analysis, the tuning post is considered as a short-circuited second probe. A computer algorithm for calculating the input impedance of this structure is developed. This algorithm is used to investigate and improve the operation of a commercially available coaxial-to-waveguide adaptor     

Transmission-Line Properties of a Strip on a Dielectric Sheet on a Plane

The subject is a strip Iine formed of a strip and a parallel ground plane separated by a dielectric sheet (commonly termed "microstrip"). Building on the author's earlier papers all the significant properties are formulated in explicit form for practical applications. This may mean synthesis and/or analysis. Each formula is a close approximation for all shape ratios, obtained by a gradual transition between theoretical forms for the extremes of narrow and wide strips. The effect of thickness is formulated to a second-order approximation. Then the result is subjected to numerical differentiation for simple evaluation of the magnetic-loss power factor from the skin depth. The transition formulas are tested against derived formulas for overlapping narrow and wide ranges of shape. Some of these formulas are restated from the earlier derivations and others are derived herein. The latter include the second-order approximation for a narrow thin strip, and a close approximation for a narrow or wide square cross section in comparison with a circular cross section. Graphs are given for practical purposes, showing the wave resistance and magnetic loss for a wide range of shape and dielectric. For numerical reading, the formulas are suited for programming on a digital pocket calculator.     

基于智能手机压电基片上微液滴位置分析章

为了降低微流分析成本,该文提出了基于智能手机检测压电基片上目标微液滴方法,并开发出相应的应用软件,通过分析微液滴颜色信息和几何信息定位目标微液滴位置,结合分析时间获取微液滴输运速度。为验证提出方法的正确性,以5 μL黑色墨水溶液微液滴为研究对象,进行压电基片上微液滴识别和位置分析实验。结果表明,该文所提方法和开发的应用软件可识别和定位压电基片上微液滴,在功率为27.5 dBm时,第2~10 s段内微液滴输运速度为0.416 mm/s。     

The measurement of a large antenna using a spacecraft as a receiver

Two computational methods for obtaining the gain pattern of a large antenna using power levels recorded by a spacecraft are developed from the transmission equation. Nominally, the large antenna is linearly polarized while the spacecraft's receiving antennas are circularly polarized. Since the spacecraft has no attitude control system, the orientation of the receiving antennas is not known a priori nor its orientation the same from orbit to orbit. The first method relies on an independent spacecraft attitude determination system to furnish the orientation of the receiving antennas. It combines this information with receiving-antenna gain measurements to give the power level of the incident radiation. Losses due to polarization mismatch are taken into account, but polarization loss factors are not actually computed. The second method relates simultaneous measurements made by separate channels with separate receiving antennas. By solving a system of equations numerically, one can determine the direction of the incident radiation as well as its power level. This alleviates the need for an attitude determination system. These methods originated in the operations of the spacecraft NUSAT1 (northern Utah Satellite)