共查询到20条相似文献,搜索用时 93 毫秒
1.
分析了一种适用于E波段81~86 GHz空间行波管的新型慢波结构——折叠矩形槽波导.折叠矩形槽波导来源于传统的矩形槽波导,将E面沿其纵向来回弯曲而形成.利用电磁场仿真软件Ansoft HFSS设计优化并最终确定了E波段折叠矩形槽波导的关键几何尺寸.同时,模拟仿真出了折叠矩形槽波导在中心频率f=83.5 GHz处的耦合阻抗沿x和y方向上的变化趋势,得出其可通过加载带状电子注获得更高的平均耦合阻抗.利用CST粒子工作室模拟得出:折叠矩形槽波导行波管在中心频点83.5 GHz处输出功率为210 W,电子效率达到8.05%. 相似文献
2.
本文用高次有限元法分析了任意形状槽波导的色散和损耗特性.该方法的有效性和可靠性由实验和其它计算结果所证实.文中对诸如矩形、三角形、抛物、椭圆和余弦等形状的槽波导进行了系统的研究.计算结果表明,不同形状槽波导具有相近的色散特性,但损耗相差很大,其中V形槽波导损耗最小,大约是矩形槽波导的一半.文中给出的曲线可供设计槽波导元件和电路时参考. 相似文献
3.
本文用高次有限元法分析了任意形状槽波导的色散和损耗特性。该方法的有效性和可靠性由实验和其它计算结果所证实。文中对诸如如矩形,三角形,抛物,椭圆和余弦等形状的槽波导进行了系统的研究。计算结果表明,不同形状槽波导具有相近的色散特性,但损耗相差很大,其中V形槽波导损耗最小,大约是矩形槽波导的一半。文中给出的曲线可供设计槽波导元件和电路时参考。 相似文献
4.
用有限元法分析任意截面槽波导 总被引:1,自引:0,他引:1
用有限元法分析了任意形状槽波导。在槽波导开放端口引进了吸收边界条件。对矩形槽波导、V形槽波导、圆形槽波导的分析表明,计算结果与实验值以及其它方法得到的结果有较好的吻合。 相似文献
5.
6.
7.
研究了三种新型的曲折波导慢波系统,分别是曲折双脊波导、脊加载曲折波导和矩形槽加载曲折波导。给出了其高频特性的理论和仿真结果。然后介绍了基于常规曲折波导和脊加载曲折波导慢波系统的Ka 波段行波管的实验结果。 相似文献
8.
本文对圆形-矩形双槽波导结构进行了进一步的讨论,推导出了该结构在二级近似条件下的特征方程,提高了分析精度。 相似文献
9.
10.
《固体电子学研究与进展》2020,(3)
提出了基于双模谐振腔的基片集成波导带通滤波器的设计,用矩形腔体中的TE_(102)和TE_(201)模式来构建通带。在传统双模谐振器分析的基础上进行研究,利用加载在腔体中心的槽线来扰动简并模,单通带和双通带性能可以通过调节槽线的长度来进行转换,并给出了对以上的功能转换的解释和说明。设计了单通带和双通带两种基片集成波导滤波器,并进行了仿真和测试,测试结果和仿真结果有较好的吻合度。 相似文献
11.
Hybrid technique of finite element method (FEM) and Gaussian mode expansion method is implemented for the analysis of transmission property of dielectric phase gratings used in holographic power combining systems. It takes advantages of the versatility of FEM and the simplicity of the mode expansion method. Apparently, this hybrid method is well suited for the analysis of phase gratings with complex profiles, which provide more degrees of structural freedom than those of classical rectangular groove gratings. The transmitted fields of an array of two and three fundamental Gaussian beams through the multi-stepped and curved gratings are calculated by the hybrid method. Numerical results show that much less phase distortion can be fulfilled for the reconstructed pseudo-plane wave by the modified phase gratings, especially the curved ones. This is advantageous for improving the combining efficiency in spatial millimeter wave and sub-millimeter wave power combining systems. 相似文献
12.
13.
14.
介绍二次有限元法分析波导本征值问题的基本原理和计算过程,编制相应的程序,实例计算了矩形波导的截止波长,并与理论值进行比较,所获得的计算结果与相关文献中所报道的数据吻合较好,表明该方法的有效性和程序的正确性。而且在此基础上计算了几种背脊波导的截止波长,单模带宽,画出了波导的场结构。这些结果和计算数据将为背脊矩形波导器件的小型化提供指导,对工程设计具有一定的实用价值。 相似文献
15.
16.
Reddy C.J. Deshpande M.D. Cockrell C.R. Beck F.B. 《Antennas and Propagation, IEEE Transactions on》1996,44(10):1327-1333
A technique using the hybrid finite element method (FEM)/method of moments (MoM) and geometrical theory of diffraction (GTD) is presented to analyze the radiation characteristics of cavity fed aperture antennas in a finite ground plane. The cavity which excites the aperture is assumed to be fed by a cylindrical transmission line. The electromagnetic (EM) fields inside the cavity are obtained using finite element method (FEM). The EM fields and their normal derivatives required for FEM solution are obtained using: (1) the modal expansion in the feed region and (2) the MoM for the radiating aperture region (assuming an infinite ground plane). The finiteness of the ground plane is taken into account using GTD. The input admittance of open-ended circular, rectangular, and coaxial line radiating into free space through an infinite ground plane are computed and compared with earlier published results. Radiation characteristics of a coaxial cavity-fed circular aperture in a finite rectangular ground plane are verified with experimental results 相似文献
17.
Day-Uei Li Hung-Chun Chang 《Quantum Electronics, IEEE Journal of》2000,36(11):1251-1261
A new vectorial finite-element method (FEM) free of spurious modes is proposed for analyzing optical waveguides with sharp corners in the cross section. The method is formulated in terms of the transverse field components Hx and Hy or Ex and Ey , and it explicitly shows the relationships between the semivectorial and the full-vectorial wave equations. In this method, we introduce the distribution concept and an inhomogeneous element to describe the field across the dielectric interface, and the error in the numerical solution caused by the dielectric discontinuity is reduced. We show how the width of such inhomogeneous elements and the number of nodes would affect the numerical result and its convergent rate using the dielectric-loaded rectangular waveguide, the channel waveguide, and the rib waveguide as analysis examples. For the dielectric-loaded rectangular waveguide, we compare our results with the exact solutions. For the rib waveguide, we compare our results with previously published data based on other methods. Also, field convergence near the corners is discussed 相似文献
18.
矩形微带贴片天线的谐振频率 总被引:1,自引:0,他引:1
本文采用有限元法对有短路销钉的可调频薄基片矩形贴片微带天线的谐振频率进行计算,其计算结果与实验结果相当一致,该方法原则上适合于多个短路销钉置于任意位置的情形,可能是处理带短路销钉微带贴片天线的最有效的方法。 相似文献
19.