共查询到20条相似文献,搜索用时 15 毫秒
1.
In this study, the effects of polycarboxylic acid sodium salt on the dyeing of cotton with reactive dyes were evaluated by measuring and comparing the K/S values and dyeing fastnesses of the dyed cotton fabric samples. Results showed that the K/S value and dyeing fastness of cotton fabrics dyed with polycarboxylic acid sodium salt, substituting inorganic salts as exhausting agent were close to that of with sodium chloride when dip‐dyeing process was used. While, in pad‐dry dyeing, the K/S value of cotton fabric samples dyed with polyacid salts as exhausting agent was higher than that of with sodium sulfate, and the dyeing fastnesses of these samples were nearly the same. The dyeing mechanism of cotton fabric with reactive dye, using polycarboxylic acid sodium salt as exhausting agent was analyzed. The dyeing exhausting mechanism of reactive dye seems different when the inorganic salt and polycarboxylic acid sodium salt were used as exhausting agent in the dyeing of cotton fabric with reactive dye. The polycarboxylic acid sodium salt, as weak electrolyte, increased the dye‐uptake of reactive dye on cotton fabric not only by screening negative charges on cotton surface, but also by the effect of salting‐out or hydrophobic combination. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007 相似文献
2.
Nano polyurethane (Nano PU) was used for the fabrication of multilayer nanocomposite film deposition on wool fabrics by electrostatic self-assembly to improve the anti-felting properties. Oppositely charged cationic poly (diallyldimethylammonium chloride) (PDDA) and anionic Nano PU were alternately deposited on the surface of wool fabrics. 8, 12 and 16 multilayer films of PDDA/Nano PU were deposited on the wool fabric surfaces using a padder. Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy (FTIR-ATR) and Scanning Electron Microscopy (SEM-EDX) were used to verify the presence of deposit nanolayers. Breaking strength, whiteness and yellowness value analysis was performed on the fabrics before and after the treatment with Nano PU by the electrostatic self-assembly method. The build-up of the multilayer films and the level of colour strength (K/S) achieved are discussed after the acid dyeing process. To examine the anti-felting properties of the multilayered fabrics, the fabric shrinkage after washing was determined. 相似文献
3.
Vahid Ameri Dehabadi Hans‐Jürgen Buschmann Jochen S Gutmann 《Coloration Technology》2013,129(2):155-158
In this study, polyamino carboxylic acids have been used to improve the dyeability of cotton in a salt‐free reactive dyeing process. These polyamino carboxylic acids were prepared by partial carboxylation of polyvinylamine. Cotton fabric was pretreated with polyamino carboxylic acids and dyed with reactive dyes. The colour strengths of the dyed fabrics were evaluated by measuring the K/S values. The fastness properties (washing, rubbing and light fastness) of the dyed cotton fabrics were also measured. The pretreatment of cotton with polyamino carboxylic acids creates positive charges on the fabric surface. In this way, salt‐free reactive dyeing of cotton or dyeing with only a small amount of electrolyte is possible. 相似文献
4.
本文从棉织物阳离子改性和Argazol NF系列活性染料应用两方面考虑,实现棉织物活性染料的无盐、无碱清洁染色.改性条件为阳离子改性剂用量7%,80℃,10分钟.改性后的棉织物用Argazol NF系列活性染料染色,该清洁染色工艺条件为80℃,90分钟. 相似文献
5.
Dyeing natural fibres in supercritical carbon dioxide using a nonionic surfactant reverse micellar system 总被引:2,自引:0,他引:2
A reverse micellar system in supercritical carbon dioxide has been developed as a dyeing medium. Water-soluble dyes such as reactive dyes and acid dyes could be sufficiently solubilised in the interior of a specially constituted reverse micelle. Protein fabrics, silk and wool, were satisfactorily dyed even in deep shades with conventional acid dyes without any special pretreatment. Cotton cellulose fabric was also dyed with conventional reactive dyes when the electrostatic force of repulsion between dye and cotton was eliminated. Compared to previously proposed supercritical dyeing methods, dyeing of fabrics with this system could be performed at low temperatures and pressures in a short time. 相似文献
6.
A method for dyeing cotton fabric with anthocyanin dyes extracted from mulberry (Morus rubra) fruits
下载免费PDF全文
![点击此处可从《Coloration Technology》网站下载免费的PDF全文](/ch/ext_images/free.gif)
For the first time, the natural anthocyanin dyes (mainly consisting of cyanidine 3‐glycoside) extracted from mulberry (Morus rubra) fruits has been successfully used to dye cotton fabric, with a dyeing property performance good enough for potential commercial applications. In this study, succinic acid was firstly incorporated into cotton fabrics by esterification to the hydroxyl groups of cellulose, forming an anionic site for the dyes. The performance of the modified material was characterised by Fourier transform infrared spectroscopy and tensile strength. Results showed that the tensile strength of cotton fabrics was mostly retained after modification. The anthocyanin extracts from mulberry fruits were used to study the dyeability of the control and modified cotton fabrics. Red and deep purple (aubergine) are two main shades of cotton fabrics dyed with mulberry fruit extracts. Most importantly, aubergine shade is rare in cotton fabrics dyed with natural dyes. Modification with succinic acid clearly increased the colour strength of the dyed cotton fabric. The colour strength of dyed cotton fabric was improved from 2.7 to 5.3 in the case of dyeing without mordants, and from 3.2 to 6.9 in the case of dyeing with tin mordanting. Meanwhile, the colour fastness was improved by 0.5–2 grades with increasing succinic acid concentration in the finish solution. The colour fastness to perspiration, crocking, light, and washing of fabric dyed with simultaneous tin mordanting and modified with 30 g l?1 of succinic acid was found to be acceptable, with a grey scale grade of at least 3. As for home laundering, neutral soapy solution was more acceptable than alkaline soapy solution. 相似文献
7.
Optimal dyeing systems for resistance to the physical strength loss of the PLA/cotton blended fabric
In this study, optimization of disperse/reactive dyeing systems for resistance to the physical strength loss of Poly(lactic acid) (PLA)/cotton blended fabric was investigated. The blended fabric underwent a two‐bath, two‐stage dyeing process in which the PLA component of the blended fabric was dyed using two disperse dyes, followed by the cotton component being dyed with six reactive dyes containing different reactive groups—dichlorotriazine, monochlorotriazine, sulphatoethylsulphone, monofluorotriazine, monochlorotriazine/sulphatoethylsulphone, and monofluorotriazine/sulphatoethylsulphone groups. The optimal dyeing systems were established according to the fixation rate of the dyes, tear/tensile strength loss, and SEM micrographs of the fabric. To avoid the strength loss during the disperse/reactive dyeing process, the recommended disperse dyeing conditions were 110°C, pH 5 for 20 min, whereas the reactive dyeing conditions should be temperature ≤60°C and alkali concentration ≤3 g/L. In this regard, reactive dyes containing monofluorotriazine and monofluorotriazine/sulphatoethylsulphone groups were especially suitable for the reactive dyeing systems. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011 相似文献
8.
In this work, after cationic pretreatment of cotton fabric with cetylpyridinium chloride (CPC), the compound of citric acid (CA) and succinic acid (SUA) were used as crosslinking agents to dye cotton fabrics with natural madder dye to improve the dyeing and antibacterial properties and realise the multifunctional finishing of cotton fabric. The effects of mordant dyeing, CA + SUA crosslinked dyeing, and CPC/CA + SUA crosslinked dyeing on the microstructure and properties of cotton fabrics were compared. The dyeing by the three processes occurred primarily in the amorphous zone of the fibres, and all kept the original crystalline form of the cotton. CA + SUA crosslinked dyeing and CPC/CA + SUA crosslinked dyeing increased the thermal stability of the cotton fabric. CPC/CA + SUA crosslinked dyed cotton obtained excellent dyeing results with the colour depth value (K/S) of 12.3 and rubbing fastness and washing fastness of levels 4–5, and the levelness and dye permeability were acceptable. Furthermore, the antibacterial rate against Escherichia coli and Staphylococcus aureus reached 99.99%, and the ultraviolet protection factor (UPF) reached 50+. Moreover, the wrinkle recovery angle (WRA) increased by 55% compared with raw cotton. This showed that CPC/CA + SUA crosslinked dyed cotton had excellent antibacterial, anti-ultraviolet, and anti-wrinkle performances. 相似文献
9.
Lyocell union fabrics, namely lyocell/silk and lyocell/polyester fabrics, were woven in different fabric constructions and dyed with reactive dyes, acid dyes and a disperse dye. The resulting dyed fabrics were given a resin finishing treatment and their wash fastness was measured. With appropriate dye selection and control of dyeing conditions, some bright solid shades and effective cross‐dyed shades were obtained. The dyed and finished fabrics had a smooth, lustrous handle, ideal for lightweight garments. 相似文献
10.
Carbon black (CB) aqueous dispersion was prepared and used to dye the cationic‐modified cotton fabrics through exhaust dyeing process. The effects of CB concentration, CB nanoparticles size, dyeing bath pH, dyeing time and dyeing temperature were investigated. The color yields of dyed fabrics were evaluated on Kubelka‐Munk value K/S. The surface morphologies of cationic modified and nonmodified cotton fabrics were measured by video microscope. The fabrics presented 18.9 of the color yield with the dyeing conditions: the dyeing solution contained 2% o.w.f. CB and dyeing at 80°C for 30 min with pH 13 using a 50 : 1 liquor ratio. The images of the video microscope demonstrated a clear surface profile for the cationic‐modified cotton fabrics dyed with smaller CB particle size solutions. These results indicated that CB nanoparticles were suitable for dyeing the cotton fabrics. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011 相似文献
11.
锦纶和棉的染色性能不同,所以锦/棉交织物的同色性染色工艺较为复杂。传统的染色方法是采用分散/活性,分散/直接,酸性/活性等两浴法染色。本文用活性染料对锦/棉织物进行一浴两步法染色。选择pH值4.5-5可以对锦纶染色,在碱性条件下对锦纶不上色或轻微上色的活性染料,首先在酸性条件下对锦纶纤维染色,然后调节pH值到碱性对棉纤维染色,得到了优异的同色性。 相似文献
12.
The dyeing properties of cationic cotton dyed with acid dyes are examined in this study. For comparison, nylon 6 and untreated cotton are dyed by the same acid dyes (Sandolan Red MF‐2BL, Sandolan Golden Yellow MF‐GL, and Sandolan Blue MF‐GL). A cationic agent, polyepichlorohydrin‐dimethylamine (PECH‐amine), is used to modify cotton fabric. Significant increase in color yield is observed for cationic cotton over untreated cotton because of the introduced positively charged sites by cationic modification. Deeper shades are obtained in all cases with cationic cotton. All of the acid dyes used in this study show significant hooking behavior with both cationic cotton and nylon. © 2006 Wiley Periodicals, Inc. J Appl Polym Polym Sci 100: 3302–3306, 2006 相似文献
13.
本文以苯甲酸为原料,经酰氯化生成苯甲酰氯,再与间苯二酚反应生成中间体2,4-二羟基二苯甲酮,产率79.4%。然后以2,4-二羟基二苯甲酮为封闭基,对位酯为重氮组分合成了黄、橙、红和蓝色4只新结构的活性染料,并用质谱对其结构进行了表征。用合成的染料对棉纤维染色,测定了染料的上染率和固色率,黄色染料染色性能较差。与未染色的棉纤维相比,染色后棉纤维的紫外线透过率大大降低。未染色纤维UPF值为1.3,经过黄、橙、红和蓝色染料染色的棉纤维的UPF值分别为6.1、16.1、16.0、18.5,除黄色外都达到了很好的抗紫外线效果。 相似文献
14.
Tülin Öktem 《Coloration Technology》2003,119(4):241-246
Antibacterial activities of cotton and polyester/cotton fabrics treated with chitosan or chitosan/DMDHEU have been investigated. The washing durability properties of the aforementioned fabrics were also studied. Another group of fabric samples produced from mature and immature cotton fibres were dyed with reactive dyes and the colour yields and colour differences of the dyed fabrics assessed. The surfaces of the treated and untreated cotton fabrics were observed by scanning electron microscopy to compare the morphology. 相似文献
15.
The cationic P(DMDAAC-BA-MMA-HEA) copolymer latex was prepared with diallyldimethylammonium chloride, butyl acrylate, methylmethacrylate and hydroxyethyl acrylate as monomers via surfactant-free emulsion polymerization. The structures and morphologies of the latex were confirmed by Fourier transform infrared (FT-IR) spectroscopy and transmission electron microscopy (TEM). The utilization performance of the cationic latex as a binder for pigment dyeing of cotton fabrics was investigated. FT-IR showed that the polymer was prepared successfully. TEM micrograph revealed that the hybrid latex particles were uniform spheres with the diameter ranged from 500 to 600 nm. Cotton fabric dyed with the cationic binder demonstrated 3–4 grade dry and wet rubbing fastness and 4 grade soaping fastness, which were comparable with commercial binders. Moreover, the binder can be used safely in pigment dyeing to give the dyed fabric improved hand feel and excellent elongation at break. It could be said that an efficient way to produce a binder with good performance was developed by the use of cationic emulsifier-free emulsion polymerization. 相似文献
16.
Javad Mokhtari Kamaladin Gharanjig Mokhtar Arami Niyaz Mohammad Mahmoodi 《Coloration Technology》2008,124(5):295-300
The dyeing of polyester–cotton blends with new alkali‐hydrolysable azo disperse dyes based on N‐ester‐1,8‐naphthalimide was investigated. Polyester–cotton blend fabrics were dyed using both one‐ and two‐bath methods. Dyes 3 and 4 offered lower colour yield on polyester using the one‐bath method. For the rest of the dyes, employing either the one‐ or two‐bath method resulted in a similar colour yield on polyester fabric. The results for fastness properties and colour yield of the dyeings showed that the dyes were suitable for dyeing polyester–cotton blends using the one‐bath method. The kinetic study of hydrolysis of the dyes in alkali media obeyed the pseudo first‐order reaction rate. 相似文献
17.
为实现槐米染料的工业化应用及提高棉织物的功能性,分析了使用壳聚糖、Al3+、Fe2+媒染剂预媒染色法对棉织物染色效果的影响,重点研究了铝预媒染方法染色温度、染色时间、pH值等工艺参数对染色棉织物K/S值的影响,并测试了槐米染色棉织物的抗紫外性能。结果表明:直接使用槐米染色的效果较差;壳聚糖媒染对上染效果影响不大,使用铝、铁媒染剂,可得到不同颜色的棉织物;铝媒染剂染色棉织物为鲜艳的黄色,为较好的媒染方法;铝预媒染染色方法染色优化条件为:温度为80℃,染色时间120分钟,染浴pH值为6.8;铝预媒染染色棉织物具有较好的抗紫外性能。 相似文献
18.
Shixiong Yi Yongchun Dong Bing Li Zhizhong Ding Xiangbo Huang Lexing Xue 《Coloration Technology》2012,128(4):306-314
To achieve the goals of saving water and being salt‐free in the coloration of cotton fabric with reactive dye, nonionic reverse micelles were prepared and optimised with a surfactant, Triton X‐100, n‐octanol and isooctane by injecting a small amount of CI Reactive Red 195 aqueous solution. The adsorption, diffusion and fixation of this dye on cotton fabric in Triton X‐100 reverse micelle and bulk water were then investigated. The equilibrium and kinetic data of the dye adsorption process were evaluated. The colour strength and fixation rate of cotton fabrics dyed in the micelle and in bulk water were also examined and compared. The results indicated that the amount of dye adsorbed increased with the increasing temperature and the initial dye concentration. The dye adsorption process could be described using the Langmuir isotherm and pseudo‐second‐order kinetic equations. It was found that CI Reactive Red 195 showed a stronger adsorption property on cotton fabric in Triton X‐100 reverse micelle than in bulk water without the addition of sodium chloride. Using Triton X‐100 reverse micelle as the dyeing medium offered the reactive dye better diffusion performance within the cotton fibre as compared with bulk water. Moreover, higher fixation of the dyes absorbed on the cotton fibre was achieved when the optimum concentration of sodium carbonate was used as the alkali agent in Triton X‐100 reverse micelle. 相似文献
19.
Tertiary amine cationic polyacrylamide with high cationization degree was used as a new cationic agent to pretreat cotton with dip-pad-bake method. The obtained cationic cotton was dyed with reactive dyes in the absence of electrolyte. The effects of the characteristics of the cationic agent and the pretreatment conditions on dyeability of reactive dye were investigated. The results showed that the fixation and K/S values of the reactive dyes on the cationic cotton were improved compared with those on the un-treated one in the presence of salt. Tests on fastness properties of the dyed cotton and fabric quality of the pretreated cotton were carried out and the results showed that wash and rub fastness of the salt-free dyeing were both satisfactory. And anti-crease property, tensile and tear strength, and handling of the cationic cotton were also good compared with that of the untreated one. 相似文献
20.
Modifying of Cotton Fabric Surface with Nano-ZnO Multilayer Films by Layer-by-Layer Deposition Method 总被引:1,自引:0,他引:1
Şule S Uğur Merih Sarıışık A Hakan Aktaş M Çiğdem Uçar Emre Erden 《Nanoscale research letters》2010,5(7):1204-1210
ZnO nanoparticle–based multilayer nanocomposite films were fabricated on cationized woven cotton fabrics via layer-by-layer
molecular self-assembly technique. For cationic surface charge, cotton fabrics were pretreated with 2,3-epoxypropyltrimethylammonium
chloride (EP3MAC) by pad-batch method. XPS and SEM were used to examine the deposited nano-ZnO multilayer films on the cotton
fabrics. The nano-ZnO films deposited on cotton fabrics exhibited excellent antimicrobial activity against Staphylococcus aureus bacteria. The results also showed that the coated fabrics with nano-ZnO multilayer films enhanced the protection of cotton
fabrics from UV radiation. Physical tests (tensile strength of weft and warp yarns, air permeability and whiteness values)
were performed on the fabrics before and after the treatment with ZnO nanoparticles to evaluate the effect of layer-by-layer
(LbL) process on cotton fabrics properties. 相似文献