有Mate-Pairs的个体单体型MSR问题的参数化算法

个体单体型MSR(minimum SNP removal)问题是指如何利用个体的基因测序片断数据去掉最少的SNP(single-nucleotide polymorphisms)位点,以确定该个体单体型的计算问题.对此问题,Bafna等人提出了时间复杂度为O(2^kn²m)的算法,其中,m为DNA片断总数,n为SNP位点总数,k为片断中洞(片断中的空值位点)的个数.由于一个Mate-Pair片段中洞的个数可以达到100,因此,在片段数据中有Mate-Pair的情况下,Bafna的算法通常是不可行的.根据片段数据的特点提出了一个时间复杂度为O((n-1)(k₁-1)k₂2^2h+(k₁+1)^2h+nk₂+mk₁)的新算法,其中,k₁为一个片断覆盖的最大SNP位点数(不大于n),k₂为覆盖同一SNP位点的片段的最大数(通常不大于19),h为覆盖同一SNP位点且在该位点取空值的片断的最大数(不大于k₂).该算法的时间复杂度与片断中洞的个数的最大值k没有直接的关系,在有Mate-Pair片断数据的情况下仍然能够有效地进行计算,具有良好的可扩展性和较高的实用价值.     

随机正则(k,r)-SAT问题的可满足临界

研究k-SAT问题实例中每个变元恰好出现r=2s次,且每个变元对应的正、负文字都出现s次的严格随机正则（k,r）-SAT问题.通过构造一个特殊的独立随机实验,结合一阶矩方法,给出了严格随机正则（k,r）-SAT问题可满足临界值的上界.由于严格正则情形与正则情形的可满足临界值近似相等,因此得到了随机正则（k,r）-SAT问题可满足临界值的新上界.该上界不仅小于当前已有的随机正则（k,r）-SAT问题的可满足临界值上界,而且还小于一般的随机k-SAT问题的可满足临界值.因此,这也从理论上解释了在相变点处的随机正则（k,r）-SAT问题实例通常比在相应相变点处同规模的随机k-SAT问题实例更难满足的原因.最后,数值分析结果验证了所给上界的正确性.     

一类可分离SAT问题的O(1.890n)精确算法

布尔可满足性问题（SAT）是指对于给定的布尔公式,是否存在一个可满足的真值指派.这是第1个被证明的NP完全问题,一般认为不存在多项式时间算法,除非P=NP.学者们大都研究了子句长度不超过k的SAT问题（k-SAT）,从全局搜索到局部搜索,给出了大量的相对有效算法,包括随机算法和确定算法.目前,最好算法的时间复杂度不超过O（（2-2/k）ⁿ）,当k=3时,最好算法时间复杂度为O（1.308ⁿ）.而对于更一般的与子句长度k无关的SAT问题,很少有文献涉及.引入了一类可分离SAT问题,即3-正则可分离可满足性问题（3-RSSAT）,证明了3-RSSAT是NP完全问题,给出了一般SAT问题3-正则可分离性的O（1.890ⁿ）判定算法.然后,利用矩阵相乘算法的研究成果,给出了3-RSSAT问题的O（1.890ⁿ）精确算法,该算法与子句长度无关.     

在消息传递并行机上的高效的最小生成树算法

基于传统的Borǔ vka串行最小生成树算法,提出了一个在消息传递并行机上的高效的最小生成树算法.并且采用3种方法来提高该算法的效率,即通过两趟合并及打包收缩的方法来减少通信开销,通过平衡数据分布的办法使各个处理器的计算量平衡.该算法的计算和通信复杂度分别为O(n²/p)和O((t_sp+t_wn)n/p).在曙光-1000并行机上运行的实际效果是,对于有10 000个顶点的稀疏图,通过16个节点的运行加速比是12.     

改进的Haar子带变换双滤波器自适应算法

为提高双滤波器结构（Dual filter structure, DFS）一级滤波器W₁（k）的收敛速度,本文提出一种改进的Haar子带变换（Partial Haar transform, PHT）算法。新算法先对W₁（k）的输入信号进行PHT变换以压缩滤波器长度;然后通过优化收敛步长使后验误差最小化以提高收敛速度;最后通过分时保存、维护算法的归一化因子以降低算法计算复杂度。通过提高W₁（k）的收敛速度,新算法可以更少的迭代次数获得稳定的延时估计,从而提高DFS的整体收敛速度。以回声消除为应用背景对新算法进行实验仿真,实验结果表明新算法性能显著优于其他传统的自适应算法。     

无存储器冲突的并行快速排序算法*

本文在一个EREW PRAM(exclusive read exclusive write paralled random accessmachine)上提出一个并行快速排序算法，这个算法用k个处理器可将n个项目在平均O((n/k+logn)logn)时间内排序．所以平均来说算法的时间和处理器数量的乘积对任何k≤n/logn是 O(nlogn)．     

面向数值型敏感属性的隐私保护方案

针对现有的个性化隐私匿名技术不能很好地解决数值型敏感属性容易遭受近邻泄漏的问题,提出了一种基于聚类技术的匿名模型——（ε_i,k）-匿名模型.该模型首先基于聚类技术将按升序排列的敏感属性值划分到几个值域区间内;然后,提出了针对数值型敏感属性抵抗近邻泄漏的（ε_i,k）-匿名原则;最后,提出了一种最大桶优先算法来实现（ε_i,k）-匿名原则.实验结果表明,与已有的面向数值型敏感属性抗近邻泄漏方案相比,该匿名方案信息损失降低,算法执行效率提高,可以有效地降低用户隐私泄露风险.     

半动态矩形交查询算法

本文讨论了动态矩形交查询算法.文中介绍了两个半动态矩形查询的新算法，它们分别基于一维数据结构和二维数据结构.一维查询算法的查询时间复杂度是O（logM＋k′），更新时间复杂度是O（logMlogn），空间复杂度是O（nlogM/）.二维查询算法的查询时间复杂度是O（log²M＋k），更新时间复杂度是O（log²Mlogn），空间复杂度是O（nlog²M）.本文分别实现了这两个算法，通过对它们的性能进行比较，发现一维查询算法是一种高效、实用的算法.     

P2-Packing问题参数算法的改进

P₂-Packing问题是一个典型的NP难问题.目前这个问题的最好结果是时间复杂度为O^*(2^5.301k)的参数算法,其核的大小为15k.通过对P₂-packing问题的结构作进一步分析,提出了改进的核心化算法,得到大小为7k的核,并在此基础上提出了一种时间复杂度为O^*(2^4.142k)的参数算法,大幅度改进了目前文献中的最好结果.     

RNA二级结构预测中动态规划的优化和有效并行

基于最小自由能模型的方法是计算生物学中RNA二级结构预测的主要方法,而计算最小自由能的动态规划算法需要O(n⁴)的时间,其中n是RNA序列的长度.目前有两种降低时间复杂度的策略:限制二级结构中内部环的大小不超过k,得到O(n²×k²)算法;Lyngso方法根据环的能量规则,不限制环的大小,在O(n3)的时间内获得近似最优解.通过使用额外的O(n)的空间,计算内部环中的冗余计算大为减少,从而在同样不限制环大小的情况下,在O(n³)的时间内能够获得最优解.然而,优化后的算法仍然非常耗时,通过有效的负载平衡方法,在机群系统上实现并行程序.实验结果表明,并行程序获得了很好的加速比.     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

How do children do mathematics with LOGO?

Abstract  This paper considers some results of a study designed to investigate the kinds of mathematical activity undertaken by children (aged between 8 and 11) as they learned to program in LOGO. A model of learning modes is proposed, which attempts to describe the ways in which children used and acquired understanding of the programming/mathematical concepts involved. The remainder of the paper is concerned with discussing the validity and limitations of the model, and its implications for further research and curriculum development.