共查询到20条相似文献,搜索用时 140 毫秒
2.
为有效封堵优势渗流通道,解决注入溶液窜流突进及沿优势渗流通道无效循环对改善油田开发效果以及达到控水稳油的目的具有重要意义。应用数值模拟示踪剂方法研究优势渗流通道的动态反映特征,筛选出影响和标志优势渗流通道存在的主要参数指标并分析其相关特性,制定基于油藏模拟的优势渗流通道判别标准和成果表征,实现定量识别优势渗流通道的方法,对油田开发控水提效具有重要意义。 相似文献
3.
李硕轩 《中国石油和化工标准与质量》2023,(19):26-28
优势渗流通道是影响非均相复合驱大幅度提高采收率的重要因素。为了定量评价储层优势渗流通道发育情况,建立了基于主成分分析的优势渗流通道模糊综合评价模型,计算不同注采方向优势渗流通道渗透率、喉道半径等参数,为非均相复合驱油体系优化提供数据支持。 相似文献
4.
本文以南三东聚驱后井网加密三元试验区为例,利用取心井资料,一、二类油层新钻井测井解释资料,数值跟踪拟合结果,精细地质研究结果及聚驱后开发动态等资料,明确储量潜力部位,确定平面、厚层内部剩余油,深化萨南开发区南三区东部一类油层聚驱后开发潜力认识;分析优势渗流通道对开发效果的影响,试验区利用井网加密与三元驱结合驱油,并加强优势渗流通道治理,聚驱后开发见到一定开发效果。 相似文献
5.
X区块一类油层中聚驱后形成优势渗流通道,油层水淹情况严重。为了进一步提高区块动用程度及采收率,采用数值模拟方法对比不同井网重构及化学驱开发效果,结合经济效益优选适合目标区块的提高采收率方法。结果表明:低初黏凝胶可有效封堵优势渗流通道,降低油层水淹程度,聚驱后化学驱可有效提高采收率。综合开发效果和经济效益采取分流线加密油井结合加入低初黏凝胶调堵剂的弱碱三元复合驱体系进一步挖潜聚驱后剩余油,提高采收率8.78%。 相似文献
6.
聚驱后一类油层采出程度高、优势渗流通道大面积发育、剩余油分布零散、挖潜难度大。本文以S区块聚驱后井网加密三元复合驱试验区为例,为提高油层动用程度、降低优势渗流通道吸液比例,结合注采井动、静态资料,确定了聚驱后深度调剖选井、选层原则;通过室内实验,筛选出耐碱颗粒调剖剂和多元络合凝胶型调剖剂,并确定了段塞组合方式;现场实施后,调剖井平均单井注入压力上升2.3MPa,注入剖面得到改善,连通油井综合含水下降1.3个百分点。 相似文献
7.
丁富寿 《中国石油和化工标准与质量》2013,(6):240
经过长期注水开采,油田进入开发中后期,油层内油、气、水交错渗流,剩余油的挖潜难度加大。剩余油分布研究主要从剩余油分布研究方法、剩余油分布特征、剩余油分布控制因素三方面进行。本文总结了剩余油分布及挖潜技术状况和最新进展,提出完善井网、周期注水、补孔改层等挖潜措施。 相似文献
8.
9.
10.
相斌 《中国石油和化工标准与质量》2018,(2):95-96
就目前而言,很多优势渗流通道中所进行试井识别的解释方法都尚存一些不足之处,具体来说,对渗流通道进行识别的方法有很多种,其中包括测井的对比方法、岩心的分析方法、降压的测试方法等等,对于优势渗流通道来说,试井解释方法是最常见的也是应用最为广泛的一种识别方法,这种方法主要是通过建立石井模型,然后对其渗透率、储存容量比等相关数据进行分析,最后再通过数学曲线模型对其进行模拟运算,这样可以科学地对渗流通道中所存在的一些问题进行识别,所以这种试井的解释方法是非常值得我们去研究的。 相似文献
11.
12.
13.
14.
为扩大大庆油田复合驱用表面活性剂的原料范围,降低表面活性剂的生产成本,研究了利用不同的减渣制备复合驱用表面活性剂的可能性。实验结果表明,利用大庆减渣制备出的OCS表面活性剂具有很好的界面活性,当OCS表面活性剂浓度为0·1%~0·3%,Na2CO3浓度在0·6%~1·2%的范围内,OCS表面活性剂/Na2CO3体系与大庆原油之间的界面张力可达到超低(~10-3mN/m数量级)。大庆减渣适宜作为复合驱用表面活性剂的原料,而大港和石家庄减渣则不适宜。 相似文献
15.
16.
天然气水合物是天然气与水在低温高压的条件下形成的一种冰状物质,广泛分布于海底和冻土区的沉积物中,资源量巨大,有望成为未来接替能源。在已发现的资源中,有一种类型的天然气水合物位于海底浅表层或裸露于海底,其形成过程和稳定性规律尚不明确。为揭示其稳定性规律,实验研究了石英砂中甲烷水合物的溶解过程。结果表明,水和白油均能有效溶解石英砂中的甲烷水合物,注水溶解的气水体积比约为2,注油溶解的气液体积比约为10,溶解速率主要受液流-水合物的接触情况影响,随水合物饱和度升高而升高。水/油易在石英砂中窜进,形成优势渗流通道,随后气液比逐渐降低。实验结果为深入研究海底浅表层或裸露的天然气水合物的稳定机理提供了基础。 相似文献
17.
18.
19.
S. B. El-Magoli M. M. Morad A. A. El-Fara 《European Journal of Lipid Science and Technology》1979,81(5):201-203
The physico-chemical properties of two kinds of Egyptian sweet melon seed oils (King Bahtim and Malty Bahtim) were investigated. The amount of oil extracted from King Bahtim reached 34% while in the other kind this percentage reached 36%. The oil extracted has high acid and iodine values in both kinds in comparison with cotton seed oil. Fatty acid composition by GLC for the two kinds revealed the presence of linolenic, linoleic, oleic, stearic, palmitic and myristic acid in different proportions. The variety of the seeds influences to a great extent the amount of saturated and unsaturated fatty acids. Oil stability investigations in a Warburg apparatus indicated that King Bahtim variety reached the maximum absorption of oxygen after 17 days, while Malty Bahtim variety needs 20 days to reach the same maximum absorption. On the other hand chemical analysis of the residual meal indicated the probability of its usage in animal feed as it contains a high amount of protein and fibers. The residual meal can be considered also as a good source for both phosphorus and potassium. 相似文献
20.
Crude oil feedstock is becoming increasingly heavier with higher sulfur, conradson carbon residue (CCR) and asphaltenes contents. This trend will specifically impact residual oil processes aimed at converting the residual oil to distillate products and hydrotreating the residual oil to low sulfur fuel oils (LSFO). In this paper, the performance of a catalyst system typically used in industrial atmospheric residue desulfurization (ARDS) units was investigated using residual oils of Kuwait Export Crude (KEC) and Eocene Crude as feedstock. The catalyst system consists of a combination of five catalysts having different physico-chemical properties. The performance of the catalyst system was studied using a pilot plant equipped with two reactors in series for a complete life cycle. Sulfur content in the product for both tests was maintained at around 0.6%, by raising the temperature gradually to compensate for the catalyst deactivation. The tests were continued until the temperature of the back-end reactor (R2) reached 412 °C. The results showed that the life of the catalyst system using the atmospheric residues of KEC and Eocene was around 7500 and 3800 h, respectively. The results are discussed in terms of possible differences in the deactivation pattern caused by differences in the composition of the two types of crude oils used in the study. 相似文献