Impedimetric immunosensor for electronegative low density lipoprotein (LDL) based on monoclonal antibody adsorbed on (polyvinyl formal)-gold nanoparticles matrix

Monoclonal antibodies (MAb) have been commonly applied to measure LDL in vivo and to characterize modifications of the lipids and apoprotein of the LDL particles. The electronegative low density lipoprotein (LDL⁻) has an apolipoprotein B-100 modified at oxidized events in vivo. In this work, a novel LDL⁻ electrochemical biosensor was developed by adsorption of anti-LDL⁻ MAb on an (polyvinyl formal)-gold nanoparticles (PVF-AuNPs)-modified gold electrode. Electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV) were used to characterize the recognition of LDL⁻. The interaction between MAb-LDL⁻ leads to a blockage in the electron transfer of the [Fe(CN)₆]⁴⁻/K₄[Fe(CN)₆]³⁻ redox couple, which may could result in high change in the electron transfer resistance (R_CT) and decrease in the amperometric responses in CV analysis. The compact antibody-antigen complex introduces the insulating layer on the assembled surface, which increases the diameter of the semicircle, resulting in a high R_CT, and the charge transferring rate constant κ⁰ decreases from 18.2 × 10⁻⁶ m/s to 4.6 × 10⁻⁶ m/s. Our results suggest that the interaction between MAb and lipoprotein can be quantitatively assessed by the modified electrode. The PVF-AuNPs-MAb system exhibited a sensitive response to LDL⁻, which could be used as a biosensor to quantify plasmatic levels of LDL⁻.     

Pharmacokinetics of insulin lispro in type 2 diabetes during closed-loop insulin delivery

Insulin pharmacokinetics is not well understood during continuous subcutaneous insulin infusion in type 2 diabetes (T2D). We analyzed data collected in 11 subjects with T2D [6 male, 9 white European and two of Indian ethnicity; age 59.7(12.1) years, BMI 30.1(3.9) kg/m², fasting C-peptide 1002.2(365.8) pmol/l, fasting plasma glucose 9.6(2.2) mmol/l, diabetes duration 8.0(6.2) years and HbA1c 8.3(0.8)%; mean(SD)] who underwent a 24-h study investigating closed-loop insulin delivery at the Wellcome Trust Clinical Research Facility, Cambridge, UK. Subcutaneous delivery of insulin lispro was modulated every 15 min according to a model predictive control algorithm. Two complementary insulin assays facilitated discrimination between exogenous (lispro) and endogenous plasma insulin concentrations measured every 15–60 min. Lispro pharmacokinetics was represented by a linear two-compartment model whilst parameters were estimated using a Bayesian approach applying a closed-form model solution. The time-to-peak of lispro absorption (t_max) was 109.6 (75.5–120.5) min [median (interquartile range)] and the metabolic clearance rate (MCR_I) 1.26 (0.87–1.56) × 10⁻² l/kg/min. MCR_I was negatively correlated with fasting C-peptide (r_s = −0.84; P = .001) and with fasting plasma insulin concentration (r_s = −0.79; P = .004). In conclusion, compartmental modelling adequately represents lispro kinetics during continuous subcutaneous insulin infusion in T2D. Fasting plasma C-peptide or fasting insulin may be predictive of lispro metabolic clearance rate in T2D but further investigations are warranted.     

Development of an optical sensor for determination of zinc by application of PC-ANN

A very sensitive and reversible optical chemical sensor based on dithizone as chromoionophore immobilized within a plasticized carboxylated PVC film for Zn²⁺ determination is described. At optimum conditions (i.e. pH 5.0), the proposed sensor displays a linear response to Zn²⁺ over 5.0 × 10⁻⁸-5.0 × 10⁻⁶ mol L⁻¹ range. This range was improved to 2.5 × 10⁻⁸-5.8 × 10⁻⁵ mol L⁻¹ range by applying principle component-feed forward artificial neural network with back-propagation training algorithm (PC-ANNB). Detection limit of 8.0 × 10⁻⁹ mol L⁻¹ was obtained. The sensor is fully reversible within the dynamic range and the response time (t_95%) is approximately 4 min under batch conditions. In addition to its high stability and reproducibility, the sensor shows good selectivity towards Zn²⁺ ion with respect to common metal cations. The sensor was successfully applied for determination of Zn²⁺ ion in hair sample.     

Embedding meshes into locally twisted cubes

As a newly introduced interconnection network for parallel computing, the locally twisted cube possesses many desirable properties. In this paper, mesh embeddings in locally twisted cubes are studied. Let LTQ_n(V, E) denote the n-dimensional locally twisted cube. We present three major results in this paper: (1) For any integer n ? 1, a 2 × 2ⁿ⁻¹ mesh can be embedded in LTQ_n with dilation 1 and expansion 1. (2) For any integer n ? 4, two node-disjoint 4 × 2ⁿ⁻³ meshes can be embedded in LTQ_n with dilation 1 and expansion 2. (3) For any integer n ? 3, a 4  × (2ⁿ⁻² − 1) mesh can be embedded in LTQ_n with dilation 2. The first two results are optimal in the sense that the dilations of all embeddings are 1. The embedding of the 2 × 2ⁿ⁻¹ mesh is also optimal in terms of expansion. We also present the analysis of 2p × 2q mesh embedding in locally twisted cubes.     

Embedding meshes into twisted-cubes

The n-dimensional twisted-cube, TN_n, is a variation of the hypercube. In this paper, we study embedding of meshes into TN_n. We prove three major results in this paper: (1) For any integer n ? 1, a 2 × 2ⁿ⁻¹ mesh can be embedded into TN_n with dilation 1 and expansion 1. (2) For any integer n ? 4, an m × k(m ? 3, k ? 3) mesh cannot be embedded into TN_n with dilation 1. (3) For any integer n ? 4, two node-disjoint 4 × 2ⁿ⁻³ meshes can be embedded into TN_n with dilation 2 and expansion 1.     

A CO2 sensor based upon a continuous-wave thermoelectrically-cooled quantum cascade laser

A CO₂ sensor based upon a continuous-wave thermoelectrically-cooled distributed feedback quantum cascade laser operating between 2305 and 2310 cm⁻¹ and a 54.2 cm long optical cell has been developed. Two approaches for direct absorption spectroscopy have been evaluated and applied for monitoring of the CO₂ concentration in gas lines and ambient laboratory air. In the first approach optical transmittance was derived from the single channel laser intensity, whilst in the second approach a ratio of signal and reference laser intensities (balanced detection) was used. The optimum residual absorption standard deviation was estimated to be 1.9 × 10⁻⁴ for 100 averages of 1 ms duration and 0.1 cm⁻¹ scans over the P(46) CO₂ absorption line of the ν₃ vibrational band at 2306.926 cm⁻¹. A CO₂ detection limit (1 standard deviation) of 36 ppb was estimated for 0.1 s average and balanced detection.     

Electrochemical genosensor based on modified octadecanethiol self-assembled monolayer for Escherichia coli detection

An electrochemical genosensor based on 1-fluoro-2-nitro-4-azidobenzene (FNAB) modified octadecanethiol (ODT) self-assembled monolayer (SAM) has been fabricated for Escherichia coli detection. The results of electrochemical response measurements investigated using methylene blue (MB) as a redox indicator reveal that this nucleic acid sensor has 60 s of response time, high sensitivity (0.5 × 10⁻¹⁸ M) and linearity as 0.5 × 10⁻¹⁸-1 × 10⁻⁶ M. The sensor has been found to be stable for about four months and can be used about ten times. It is shown that water borne pathogens like Klebsiella pneumonia, Salmonella typhimurium and other gram-negative bacterial samples has no significant effects in the response of this sensor.     

DC humidity sensing properties of BaTiO3 nanofiber sensors with different electrode materials

Barium titanate (BaTiO₃) nanofibers were synthesized by electrospinning and calcination techniques. Two direct current (DC) humidity sensors with different electrodes (Al and Ag) were fabricated by loading BaTiO₃ nanofibers as the sensing material. Compared with the Al electrode sensor, the Ag electrode sensor exhibits larger sensitivity and quicker response/recovery. The current of Al electrode sensor increases from 4.08 × 10⁻⁹ to 1.68 × 10⁻⁷ A when the sensor is switched from 11% to 95% relative humidity (RH), while the values are 2.19 × 10⁻⁹ and 3.29 × 10⁻⁷ A for the Ag electrode sensor, respectively. The corresponding response and recovery times are 30 and 9 s for Al electrode sensor, and 20 and 3 s for Ag electrode sensor, respectively. These results make BaTiO₃ nanofiber-based DC humidity sensors good candidates for practical application. Simultaneously, the comparison of sensors with different electrode materials may offer an effective route for designing and optimizing humidity sensors.     

Analyte selective response in solution-deposited tetrabenzoporphyrin thin-film field-effect transistor sensors

Organic thin film transistor (OTFT) chemical sensors rely on the specific electronic structure of the organic semiconductor (OSC) film for determining sensor stability and response to analytes. The delocalized electronic structure is influenced not only by the OSC molecular structure, but also the solid state packing and film morphology. Phthalocyanine (H₂Pc) and tetrabenzoporphyrin (H₂TBP) have similar molecular structures but different film microstructures when H₂Pc is vacuum deposited and H₂TBP is solution deposited. The difference in electronic structures is evidenced by the different mobilities of H₂TBP and H₂Pc OTFTs. H₂Pc has a maximum mobility of 8.6 × 10⁻⁴ cm² V⁻¹ s⁻¹ when the substrate is held at 250 °C during deposition and a mobility of 4.8 × 10⁻⁵ cm² V⁻¹ s⁻¹ when the substrate is held at 25 °C during deposition. Solution deposited H₂TBP films have a mobility of 5.3 × 10⁻³ cm² V⁻¹ s⁻¹, which is consistent with better long-range order and intermolecular coupling within the H₂TBP films compared to the H₂Pc films. Solution deposited H₂TBP also exhibits a textured film morphology with large grains and an RMS roughness 3-5 times larger than H₂Pc films with similar thicknesses. Despite these differences, OTFT sensors fabricated from H₂TBP and H₂Pc exhibit nearly identical analyte sensitivity and analyte response kinetics. The results suggest that while the interactions between molecules in the solid state determine conductivity, localized interactions between the analyte and the molecular binding site dominate analyte binding and determine sensor response.     

Screen-printed carbon electrode for choline based on MnO2 nanoparticles and choline oxidase/polyelectrolyte layers

This paper presents the amperometric biosensor that determines choline and cholinesterase activity using a screen printed graphite electrode. In order to detect H₂O₂ we have blanket modified the electrode material with manganese dioxide nanoparticles layer. Using layer-by-layer technique on the developed hydrogen peroxide sensitive electrode surface choline oxidase was incorporated into the interpolyelectrolyte nanofilm. Its ability to serve as a detector of choline in bulk analysis and cholinesterase assay was investigated. We examined the interferences from red-ox species and heavy metals in the blood and in the environmental sample matrixes. The sensor exhibited a linear increase of the amperometric signal at the concentration of choline ranging from 1.3 × 10⁻⁷ to 1.0 × 10⁻⁴ M, with a detection limit (evaluated as 3σ) of 130 nM and a sensitivity of 103 mA M⁻¹ cm⁻² under optimized potential applied (480 mV vs. Ag/AgCl). The biosensor retained its activity for more than 10 consecutive measurements and kept 75% of initial activity for three weeks of storage at 4 °C. The R.S.D. was determined as 1.9% for a choline concentration of 10⁻⁴ M (n = 10) with a typical response time of about 10 s. The developed choline biosensor was applied for butyrylcholinesterase assay showing a detection limit of 5 pM (3σ). We used the biosensor to develop the cholinesterase inhibitor assay. Detection limit for chlorpyrifos was estimated as 50 pM.     

An assessment of chlorophyll-a algorithms available for SeaWiFS in coastal and open areas of the Bay of Bengal and Arabian Sea

Three ocean colour algorithms, OC4v6, Carder and OC5 were tested for retrieving Chlorophyll-a (Chla) in coastal areas of the Bay of Bengal and open ocean areas of the Arabian Sea. Firstly, the algorithms were run using ~ 80 in situ Remote Sensing Reflectance, (R_rs(λ)) data collected from coastal areas during eight cruises from January 2000 to March 2002 and the output was compared to in situ Chla. Secondly, the algorithms were run with ~ 20 SeaWiFS R_rs(λ) and the results were compared with coincident in situ Chla. In both cases, OC5 exhibited the lowest log₁₀-RMS, bias, had a slope close to 1 and this algorithm appears to be the most accurate for both coastal and open ocean areas. Thirdly the error in the algorithms was regressed against Total Suspended Material (TSM) and Coloured Dissolved Organic Material (CDOM) data to assess the co-variance with these parameters. The OC5 error did not co-vary with TSM and CDOM. OC4v6 tended to over-estimate Chla > 2 mg m⁻³ and the error in OC4v6 co-varied with TSM. OC4v6 was more accurate than the Carder algorithm, which over-estimated Chla at concentrations > 1 mg m⁻³ and under-estimated Chla at values < 0.5 mg m⁻³. The error in Carder Chla also co-varied with TSM. The algorithms were inter-compared using > 5500 SeaWiFS R_rs(λ) data from coastal to offshore transects in the Northern Bay of Bengal. There was good agreement between OC4v6 and OC5 in open ocean waters and in coastal areas up to 2 mg m⁻³. There was a strong divergence between Carder and OC5 in open ocean and coastal waters. OC4v6 and Carder tended to over-estimate Chla in coastal areas by a factor of 2 to 3 when TSM > 25 g m⁻³. We strongly recommend the use of OC5 for coastal and open ocean waters of the Bay of Bengal and Arabian Sea. A Chla time series was generated using OC5 from 2000 to 2003, which showed that concentrations at the mouths of the Ganges reach a maxima (~ 5 mg m⁻³) in October and November and were 0.08 mg m⁻³ further offshore increasing to 0.2 mg m⁻³ during December. Similarly in early spring from February to March, Chla was 0.08 to 0.2 mg m⁻³ on the east coast of the Bay.     

Nano particulate SnO2 based resistive films as a hydrogen and acetone vapour sensor

SnCl₂ (solution) was spin coated on soda lime glass and Al₂O₃ substrate to obtain nano-particulate tin oxide film, directly by sintering at 550 °C for 40 minutes (min). The surface morphology and crystal structure of the tin oxide films were analyzed using atomic force microscopy (AFM) and X-ray diffraction (XRD). The size of SnO₂ nanostructure was determined from UV-vis and found to be ?3 nm. These films were tested for sensing H₂ concentration of 0.1-1000 ppm at optimized operating temperature of 265 °C. The results showed that sensitivity (R_air/R_gas per ppm) goes on increasing with decreasing concentration of test gas, giving concentration dependent changes. Special studies carried out at low concentration levels (0.1-1 and 1-10 ppm) of H₂, give high sensitivity (200 × 10⁻³/ppm) for lowest concentration (0.1-1 ppm) of H₂. The selectivity for H₂ against relative humidity (RH), CO₂, CO and LPG gases is also good. The sensor, at operating temperature of 200 °C, is showing nearly zero response to 300 ppm of H₂, and offering response to acetone vapour of 11 ppm. Selectivity for acetone against RH% and CO₂ was also studied. These sensors can be used as H₂ sensor at an operating temperature of 265 °C, and as an acetone sensor at the operating temperature of 200 °C.     

Electrocatalytic reduction of hydrogen peroxide and its determination in antiseptic and soft-glass cleaning solutions at phosphotungstate-doped-glutaraldehyde-cross-linked poly-l-lysine film electrodes

The present work describes the electrocatalytic behavior of phosphotungstate-doped glutaraldehyde-cross-linked poly-l-lysine (PLL-GA-PW) film electrode towards reduction of hydrogen peroxide (H₂O₂) in acidic medium. The modified electrode was prepared by means of electrostatically trapping the phosphotungstate anion into the cationic PLL-GA coating on glassy carbon electrode. The PLL-GA-PW film electrode showed excellent electrocatalytic activity towards H₂O₂ reduction in 0.1 M H₂SO₄. Under the optimized conditions, the electrochemical sensor exhibited a linear response for H₂O₂ concentration over the range 2.5 × 10⁻⁶ to 6.85 × 10⁻³ M with a sensitivity of 1.69 μA mM⁻¹. The curvature in the calibration curve at high concentration is explained in terms of Michaelis-Menten (MM) saturation kinetics, and the kinetics parameters calculated by three different methods were compared. The PLL-GA-PW film electrode did not respond to potential interferents such as dopamine, ascorbic acid and uric acid. This unique feature of PLL-GA-PW film electrode allowed selective determination of H₂O₂. Finally, the proposed electrochemical sensor was successfully applied to determine H₂O₂ in commercially available antiseptic solution and soft-contact lenses cleaning solution and the method has been validated using independent estimation by classical potassium permanganate titration method. Major advantages of the method are simple electrode fabrication, stability and high selectivity towards hydrogen peroxide.     

Per-6-ammonium-β-cyclodextrin/p-nitrophenol complex as a colorimetric sensor for phosphate and pyrophosphate anions in water

Using per-6-ammonium-β-cyclodextrin (per-6-NH₃⁺-β-CD) as an anion binding site and p-nitrophenol as a spectroscopic probe, a colorimetric sensor is developed for phosphate and pyrophosphate anions in water. Per-6-NH₃⁺-β-CD forms a 1:2 inclusion complex with p-nitrophenol as characterized by NOESY and ESI-MS spectra and it undergoes a distinct color change from colorless to intense yellow upon exposure to phosphate or pyrophosphate anions over other anions including perchlorate, ATP²⁻, ADP²⁻ and AMP²⁻. The seven ammonium groups of 1, bind phosphate (characterized by ESI-MS) or pyrophosphate anions specifically by electrostatic interaction. This naked eye sensing is significant for very low concentration (5 × 10⁻⁵ M) of anion with 1:2 ratio of host and guest.     

Amperometric biosensor for catechol using electrochemical template process

A novel amperometric biosensor for the determination of catechol was developed accordingly to the electrochemical template procedure. The optimum fabricating conditions of the biosensor were studied. The resulting biosensor with the limit of less than 0.05 μM can be used for detection of catechol in the linear range of 2.5-140 μM. The maximum response current (I_max) and the Michaelis-Menten constant (k′_m) are 3.08 μA and 77.52 μM, respectively. The activation energy (E_a) of the polyphenol oxidase (PPO) catalytic reaction is 25.56 kJ mol⁻¹ in the B-R buffer. The stability of the PANI-CA biosensor fabricated with the electrochemical template process (retains 86% of the original activity after four months) is much higher than that fabricated with one-step and two-step processes (retains 75% of the original activity after four months). The effects of potential and pH on the response current of the biosensor are also described.     

One-pot electrodeposition of 3-aminopropyltriethoxysilane-chitosan hybrid gel film to immobilize glucose oxidase for biosensing

We report on the electrodeposition of a 3-aminopropyltriethoxysilane-chitosan (APTES-CS) hybrid gel film for in situ immobilization of glucose oxidase (GOx) on an Au or platinized Au (Pt_nano/Au) electrode for biosensing of glucose. Controllable electroreduction of p-benzoquinone is used to lift the electrode-surface pH for the GOx-APTES-CS codeposition, which was monitored by an electrochemical quartz crystal microbalance. The fabrication procedures of the biosensor and the parameters influencing the biosensing performance were optimized. The prepared porous GOx-APTES-CS/Pt_nano/Au and GOx-APTES-CS/Au electrodes can be used to detect the enzymatically generated H₂O₂ at 0.5 and 0.7 V vs SCE, respectively. The enzyme electrodes exhibited linear responses to glucose concentration from 0.2 μM to 8.2 mM (R = 0.998, at Pt_nano/Au substrate) and from 0.2 μM to 5.5 mM (R = 0.998, at Au substrate), with current sensitivities of 69.5 (Pt_nano/Au) and 65 (Au) μA mM⁻¹ cm⁻², respectively, and a detection limit of 0.2 μM (S/N = 3) was achieved for each electrode. The response time was less than 5 (Pt_nano/Au) or 8 (Au) s. It is striking that the enzyme electrodes remained their initial response sensitivity after storage for 5 (Au) and >6 (Pt_nano/Au) months in 0.10 M PBS (pH 7.0) at 4 °C.     

Connectivity-preserving transformations of binary images

A binary image I is B_a, W_b-connected, where a, b ∈ {4, 8}, if its foreground is a-connected and its background is b-connected. We consider a local modification of a B_a, w_b-connected image I in which a black pixel can be interchanged with an adjacent white pixel provided that this preserves the connectivity of both the foreground and the background of I. We have shown that for any (a, b) ∈ {(4, 8), (8, 4), (8, 8)}, any two B_a, w_b-connected images I and J each with n black pixels differ by a sequence of Θ(n²) interchanges. We have also shown that any two B₄, W₄-connected images I and J each with n black pixels differ by a sequence of O(n⁴) interchanges.     

A sensitive hydrazine electrochemical sensor based on electrodeposition of gold nanoparticles on choline film modified glassy carbon electrode

A highly sensitive hydrazine sensor was developed based on the electrodeposition of gold nanoparticles onto the choline film modified glassy carbon electrode (GNPs/Ch/GCE). The electrochemical experiments showed that the GNPs/Ch film exhibited a distinctly higher activity for the electro-oxidation of hydrazine than GNPs with 3.4-fold enhancement of peak current. The kinetic parameters such as the electron transfer coefficient (α) and the rate of electron exchange (k) for the oxidation of hydrazine were determined. The diffusion coefficient (D) of hydrazine in solution was also calculated by chronoamperometry. The sensor exhibited two wide linear ranges of 5.0 × 10⁻⁷-5.0 × 10⁻⁴ and 5.0 × 10⁻⁴-9.3 × 10⁻³ M with the detection limit of 1.0 × 10⁻⁷ M (s/n = 3). The proposed electrode presented excellent operational and storage stability for the determination of hydrazine. Moreover, the sensor showed outstanding sensitivity, selectivity and reproducibility properties. All the results indicated a good potential application of this sensor in the detection of hydrazine.     

Carbon felt-based bioelectrocatalytic flow-through detectors: Highly sensitive amperometric determination of H2O2 based on a direct electrochemistry of covalently modified horseradish peroxidase using cyanuric chloride as a linking agent

Horseradish peroxidase (HRP) was chemically modified using cyanuric chloride (CC) as a linking agent onto a carbon felt (CF), which is a microelectrode ensemble of micro carbon fiber (>7 μm, diameter) with a random three-dimensional structure. The resulting HRP-modified CF (HRP-ccCF) exhibited well-defined redox waves based on the HRP heme Fe^III/Fe^II redox couple at −0.23 V vs. Ag/AgCl (at pH 7.0), while the HRP-adsorbed CF (HRP-CF) showed no apparent redox couple in the same potential range, indicating that the chemical modification of HRP via CC facilitated the direct electron transfer (DET) between HRP and CF. The apparent heterogeneous electron transfer rate constant k_s was estimated to be 35 s⁻¹. Cyclic voltammetry and electrochemical impedance spectroscopy revealed that the interfacial properties (i.e., structure, morphology of enzyme-layer) of covalently modified HRP (HRP-ccCF) and physically adsorbed HRP (HRP-CF) are different, resulting in the difference in the electron transfer properties. The HRP-ccCF was successfully used as a working electrode unit in bioelectrocatalytic flow-through detector for highly sensitive amperometric determination of H₂O₂. Under the optimized conditions (i.e., applied potential, 0 V vs. Ag/AgCl; carrier flow rate, 3.25 ml/min; and carrier pH 7.0), the cathodic peak current of H₂O₂ linearly increased up to 3 μM (sensitivity, 1.94 μA/μM; the detection limit, 0.08 μM [S/N = 3]) with sample through-put of ca. 90 samples/h.     

High sensitive optode for selective determination of Ni based on the covalently immobilized thionine in agarose membrane

A novel Ni²⁺ optode was prepared by covalent immobilization of thionine, 3,7-diamine-5-phenothiazoniom thionineacetate, in a transparent agarose membrane. Influences of various experimental parameters on Ni²⁺ sensing, including the reaction time, the solution pH and the concentration of reagents were investigated. Under the optimized conditions, a linear response was obtained for Ni²⁺ concentrations ranging from 1.00 × 10⁻¹⁰ to 1.00 × 10⁻⁷ mol l⁻¹ with an R² value of 0.9985. The detection limit (3σ) of the method for Ni²⁺ was 9.30 × 10⁻¹¹ mol l⁻¹. The influence of several potentially interfering ions such as Ag⁺, Hg²⁺, Cd²⁺, Zn²⁺, Pb²⁺, Cu²⁺, Mn²⁺, Co³⁺, Cr³⁺, Al³⁺ and Fe³⁺ on the determination of Ni²⁺ was studied and no significant interference was observed. The membrane showed a good durability and short response time with no evidence of reagent leaching. The membrane was successfully applied for the determination of Ni²⁺ in environmental water samples.