Effects of rare earth on inclusions and corrosion resistance of 10PCuRE weathering steel

The types,morphologies and distributions of nonmetallic inclusions in Cu-P weathering steels with and without rare earth were analyzed through a quantitative image analyzer,scanning electron microscopy(SEM)and energy dispersive spectroscopy(EDS)attached to SEM.Solid-soluble content of rare earth in the steels was analyzed by non-aqua electroanalysis and ICP.The results showed that rare earth modified the types and the morphologies of inclusions in the weathering steels.The small spherical rare earth oxysulfides and rare earth sulphides replaced the elongated MnS inclusions in the RE weathering steels.The rare earth inclusions dispersedly distributed and most inclusions were smaller than 2 μm in size.The optimum content of RE was 0.0065%-0.016% for 10PCuRE weathering steels containing about0.002% oxygen and 0.004% sulfur.Solid-soluble content of rare earth in steels was(14-20)x 10-6,which can act as a micro-alloying element.The corrosion resistance of 10PCuRE weathering steels and Q235 were studied by dry-wet cyclic immersion test.Their corrosion rates were obtained respectively.The polarization curves and pitting corrosion behaviors of weathering steels with and without rare earth were measured by electrochemical methods.The corrosion resistance of Cu-P weathering steels was improved by adding an appropriate amount of rare earth.Less and fewer rare earth inclusions largely decreased pitting susceptibility and rate of pit propagation.The pitting potential and the resistance against pitting corrosion of the RE weathering steel were significantly improved due to the modification of rare earth to inclusions.     

Lanthanide NIR luminescence for telecommunications, bioanalyses and solar energy conversion

Present-day advanced technologies heavily rely on the exciting magnetic and spectroscopic properties of lanthanide ions. In particular, their ability to generate well-characterized and intense near-infrared (NIR) luminescence is exploited in any modern fiber-optic telecommunication network. In this feature article, we first summarize the whereabouts underlying the design of highly luminescent NIR molecular edifices and materials. We then focus on describing the main trends in three applications related to this spectral range: telecommunications, biosciences, and solar energy conversion. In telecommunications, efforts concentrate presently on getting easily processable polymer-based waveguide amplifiers. Upconversion nanophosphors emitting in the visible after NIR excitation are now ubiquitous in many bioanalyses while their application to bio-imaging is still in its early stages; however, highly sensitive NIR-NIR systems start to be at hand for both in vitro and in vivo imaging, as well as dual probes combining magnetic resonance and optical imaging. Finally, both silicon-based and dye-sensitized solar cells benefit from the downconversion and upconversion capabilities of lanthanide ions to harvest UV and NIR solar light and to boost the overall quantum efficiency of these next-generation devices.     

Evaluation of D113 cation exchange resin for the removal of Eu(Ⅲ) from aqueous solution

Batch adsorption experiments were conducted for the adsorption of Eu(Ⅲ) ions from aqueous solution by D113 resin. The results indicated that D113 resin could adsorb Eu(Ⅲ) ion effectively from aqueous solution. The adsorption was strongly dependent on pH of the medium with enhanced adsorption as the pH turned from 3.50 to 7.00 and the optimal adsorption condition was in HAc-NaAc medium with pH value of 6.50. The maximum uptake capacity of Eu(Ⅲ) ions was 290.9 mg/g D113 at 298 K, at an initial pH value of 6.50. The overall adsorption process was best described by Lagergren-first-order kinetics. When Freundlich and Langmuir isotherms were tested, the latter had a better fit with the experimental data. The thermodynamic parameters such as free energy (G) which were all negative, indicated that the adsorption of Eu(Ⅲ) ions onto D113 resin was spontaneous and the positive value of enthalpy (H) showed that the adsorption was endothermic in nature. Thomas model was applied to experimental column data to determine the characteristic parameters of column useful for process design. Furthermore, Eu(Ⅲ) could be eluted by using 3.0 mol/L HCl solution and the D113 resin could be regenerated and reused.     

Phase structure and temperature dependent luminescence properties of Sr2LiSiO4F: Eu2+ and Sr2MgSi2O7: Eu2+ phosphors

Green-emitting Sr2LiSiO4F:Eu2+ and blue-emitting Sr2MgSi2O7:Eu2+ phosphors were synthesized by the conventional high temperature solid-state route,respectively.Their structures and photoluminescenee properties were comparatively investigated.It was found that the mixture phases of Sr2MgSi2O7 and SrF2 were obtained when a part of Sr2+ in Sr2LiSiO4F was replaced by some amount of Mg2+ in order to design the possible SrMgLiSiO4F:Eu2+ phosphor.Based on the photoluminescence analysis,Sr2LiSiO4F:Eu2+ phosphor exhibited a green broad emission band of main peak at 513 nm under the excitation of 365 nm,while the Sr2MgSi2O7:Eu2+ and SrMgLiSiO4F:Eu2+ phosphor showed blue emission centered at 467 nm.The temperature dependent photoluminescence properties and room temperature decay time for the three kinds of phosphors were also discussed in this paper.     

Er3+-substituted W-type barium ferrite: preparation and electromagnetic properties

Er3+-substituted W-type barium ferrites Ba1-xErx(Zn0.3Co0.7)2Fe16O27(x=0.00,0.05,0.10,0.15,0.20)were synthesized by polymer adsorbent combustion method.Samples were characterized by X-ray diffraction analysis(XRD),X-ray fluorescence(XRF),scanning electron microscopy(SEM)and network analyzer to investigate the relationships among Er3+concentration,crystal structure,surface mcrphology and electromagnetic properties.All the XRD patterns showed pure phase of W-type barium ferrite when x≤0.15,while the impurity phase of ErFeO3 appeared when x=0.20.The pure W-type barium ferrite showed a hexagonal flake shape.In addition,the microwave electromagnetic properties of samples were analyzed in the frequency range of 2-18 GHz.It was indicated that the electromagnetic properties were significantly improved when Er3+doping content was 0.10.The reasons were also discussed using electromagnetic theory.The optimized ferrite exhibited excellent microwave absoption performance.The maximum of reflection loss(RL)reached about-27.4 dB and RL was below-10dB at the frequency range from 8.4 GHz to 18 GHz,when the thickness was 2.6 mm.     

EXAFS investigation and luminescent properties of nanosized Tb: Lu2O3 phosphors

Nanosized terbium doped Lu2O3 phosphors were synthesized via a modified co-precipitation processing.The as-prepared Tb:Lu2O3 phosphors was consisted of well crystallized nanosized sphere particles with a diameter of about 30 nnx Local structure of Tb ions in Lu2O3 lattice was investigated by an analytical approach based on Fourier transformation of the extended X-ray absorption fine structure(EXAFS) data.X-ray near edge structure (XANES) spectra suggested that all Tb ions doped were tervalonce.EXAFS results indicated that Tb ions have entered the Lu2O3 cubic lattice by means of solid solution.The coordination number and first shell Tb-O distance dropped with the increasing of Tb concentration.Emission spectra of the phosphors was shown to be typical for Tb3+ with main components at 542,550 and 490 nm,derived from irradiative relaxation of 5D4 level.The emission intensity decreased severely with the increasing of Tb concentration from 1 mol.% to 15 tool.%,suggesting a significant concentration quenching above 1 mol.% Tb.The reduction of emission intensity was interpreted by higher distortion derived relaxation among the surface state resident Tb3+ ions.     

Multi-Pass Simulation of Heavy Plate Rolling Including Intermediate Forced Cooling

Thermomechanical Controlled Processing (TMCP) including accelerated cooling after the final hot rolling pass is a well-established technology,widely applied in HSLA steel plate production.However,there are still certain limitations,especially for thicker plate.The rolling schedule includes a long holding period (HP) after the roughing stage to allow the temperature to fall sufficiently for optimised TMCP during finishing.Intermediate Forced Cooling (IFC) applied during the HP can increase productivity by decreasing the required hold time,can restrict austenite grain growth,and can also improve the subsequent strain penetration in thick plate with further metallurgical benefits.Multi-pass plane strain compression (PSC) tests have been performed on the thermomechanical compression (TMC) machine at Sheffield University including different severities of IFC.Clearly it is impossible to simulate all aspects of the temperature and strain gradients present in thick plates in laboratory specimens,and most of the tests were conducted at temperatures and strains calculated by Finite Element modelling as relevant to specific positions through the plate thickness.However,some aspects of the gradients were addressed with tests using cold platens.The results have indeed shown that IFC can shorten the HP and reduce austenite grain growth and its variation across thick plate.     

Overview of Particles and Bubbles in Continuously Cast Steel

This paper gives an overview of phenomena associated with particles and bubbles in continuously cast steel. During steel processing from deoxidation to solidification the inclusion population undergoes changes with opportunities of removal. Flotation is an important separation mechanism. Inclusion particles may accumulate in the solidifying strand, thus forming enriched bands, which depend on the type of casting machine. Bubbles are created during inert gas injection. They also change in size, can float out, but also form accumulation bands. The interaction of bubbles and particles is discussed. Internal structure that recently has been observed on the inner surface of bubbles will be reviewed.     

烦恼 快乐 艺术——池莉“人生三部曲”解读

池莉的"人生三部曲"--<烦恼人生>、<不谈爱情>、<太阳出世>诉尽了普普通通的市民烦恼,小说中主人公被柴米油盐、吃喝拉撒、老婆孩子等琐事所烦着,从而构成他们的"烦恼人生".然而池莉通过自己的艺术创作,以积极的人生态度,又让读者体会到生活本身的快乐,"烦恼人生"中包含着"快乐人生".     

属性块在工程图形中的研究与应用

介绍了在工程图形中用属性块标注表面粗糙度的方法.采用属性块不仅能避免大量重复性的工作,还能节省大量的存储空间,具有提高绘图速度、质量,便于修改,资源共享等应用价值.     

试论水泵引水方式

在泵站设计中,常遇到吸上式引水方式的选择,若选择不当,常有引水效果不理想,启泵困难的情况发生,直接影响生产和生活给水.为此,本文在总结工程实践经验的基础上,详尽论述了各种引水方式的基本原理,引水装置设计,并阐述了各种引水方式的优缺点及适用条件.     

水制冷系统的水质稳定

介绍水制冷系统水质稳定的方法及应用情况.     

循环水系统存在的水锤问题及对策

通过对自备电厂循环水系统水锤造成设备损坏的原因进行分析，发现是循环水泵出口碟阀关闭时间和关闭特性存在问题。通过试验调整关阀时间和关阀特性，彻底地解决了所存在的问题。     

净化地表水代替地下水技术

介绍了唐钢处理地表水工艺流程及效果，分析了以净化地表水代替地下水带来的经济效益。     

给水系统中水泵的节能途径

供水系统长期采用阀门或开启水泵台数进行调节水压，无法根据实际使用压力和流量期进行自动供水控制，而供水系统设计加装SY智能节电器后，不仅降低运行费用，而且达到了节能节电的效果，降低了生产成本。     

GSP系列水质稳定剂在铁合金电炉循环冷却水中的应用

针对电炉热量大，水温高，水冷设备容易结垢的运行特点，总结了应用全有机配方GSP－518和杀菌灭藻剂GSP－11进行循环冷却水水质稳定处理的经验。     

高线水处理水量平衡分析及对策

从分析武钢高线浊循环水系统水质入手,根据对现场实际运行情况的调研,着重分析了系统水量不平衡对水质的影响,进而提出了解决问题的对策。     

余热锅炉软水箱自动进水装置改进

本文主要阐述了广州铜材厂有限公司余热锅炉软水箱自动进水装置在实际工作中存在的问题及改进的方法和措施。     

矿热炉循环冷却水零排污处理与节水技术

通过零排污处理，以防止循环冷却水系统结垢、腐蚀及菌藻类的繁殖、生长，是保证矿热炉连续、平稳运行，降低检修成本、提高经济效益的重要手段。通过循环冷却水零排污处理的实施，提高了工业水的重复利用率。对于维护西部地区水环境具有重要意义。     

水质稳定剂在高炉炉体循环水系统的应用

针对高炉炉体循环水系统的腐蚀与结垢倾向,通过实验找出了水质稳定药剂,实际生产运行结果表明循环水系统结垢附着速度和腐蚀速度大大低于国家标准,对运行水质没有明显影响.