Microwave Dielectric Properties of 5Li2O–0.583Nb2O5–3.248TiO2 Ceramics with V2O5

The effects of V₂O₅ addition on the sintering behavior, microstructure, and the microwave dielectric properties of 5Li₂O–0.583Nb₂O₅–3.248TiO₂ (LNT) ceramics have been investigated. With addition of low-level doping of V₂O₅ (≤2 wt%), the sintering temperature of the LNT ceramics could be lowered down to around 920°C due to the liquid phase effect. A secondary phase was observed at the level of 2 wt% V₂O₅ addition. The addition of V₂O₅ does not induce much degradation in the microwave dielectric properties but lowers the τ_f value to near zero. Typically, the excellent microwave dielectric properties of ɛ_r=21.5, Q × f =32 938 GHz, and τ_f=6.1 ppm/°C could be obtained for the 1 wt% V₂O₅-doped sample sintered at 920°C, which is promising for application of the multilayer microwave devices using Ag as an internal electrode.     

The Li2O–Nb2O5–TiO2 Composite Microwave Dielectric Ceramics with Adjustable Permittivities

A group of new y M-phase/(1− y ) Li_{2+ x} Ti_{1−4 x} Nb_{3 x} O₃ composite ceramics with adjustable permittivities for low-temperature co-fired ceramic applications was initially investigated in the study. The 0.5 M-phase/0.5 Li_{2+ x} Ti_{1−4 x} Nb_{3 x} O₃ ( x =0.01, 0.02, 0.04, 0.06, 0.081) composite ceramics were first investigated to find the appropriate "Li₂TiO₃ss" composition ( x value). The best dielectric properties of ɛ_r=40.1, Q × f values up to 9318 GHz, τ_f=25 ppm/°C, were obtained for the ceramics composites at x =0.02. Based on the good dielectric properties, the suitable "Li₂TiO₃ss" composition with x =0.02 was mixed with the Li_1.0Nb_0.6Ti_0.5O₃ powder as the ratio of y "M-phase"/(1− y ) "Li₂TiO₃ss" ( y =0.2, 0.4, 0.5, 0.6, 0.8). By adjusting the y values, the group of composite ceramics could exhibit largely are adjustable permittivities varying from ∼20 to ∼60, while Q × f and τ_f values relatively good. Nevertheless, in this study, because there are interactions between the M-phase and Li₂TiO₃ss during sintering process, their microwave dielectric properties could not be predicted precisely by the empirical model.     

Dielectric Properties of Glasses in the System Nb2O5–Na2O–SiO2

The effect of niobia on the dielectric properties of glasses in the system Nb₂O₅–Na₂O–SiO₂ has been studied from 100 to 10¹⁰ cps. The dielectric constant is high even at frequencies up to 10¹⁰ cps. The Nb⁵⁺ ion, with its small ionic radius and high charge, reinforces the network and raises the dielectric constant.     

Ionically Conducting Composite Membranes from the Li2O–Al2O3–TiO2–P2O5 Glass–Ceramic

This paper reports processing of lithium ion-conducting, composite membranes comprised of 14Li₂O·9Al₂O₃·38 TiO₂·39P₂O₅ glass–ceramic and polyethylene. The processing involved tape casting of 14Li₂O·9Al₂O₃·38TiO₂·39P₂O₅ glass powder with organic additives into tapes, subjecting the green tape to binder burnout and thermal soaking in the temperature range of 950°–1100°C, and finally infiltrating the porous tape with polyethylene solution. The ionic conductivity and microstructure of 150–350 μm thick membranes were characterized and are discussed in this paper. The crystallites of the glass–ceramic show liquid-like conductivity at ambient temperature, whereas the grain boundary conductivity is lower by a factor of five. The lower grain boundary conductivity is explained on the basis of crystallographic mismatch and the existence of AlPO₄ at the grain boundary. The polyethylene infiltration in the porous membrane improved mechanical resilience with a minor adverse effect on conductivity.     

Low-Temperature Sintering and Microwave Dielectric Properties of Li2MgSiO4 Ceramics

Development of a low-temperature sintered dielectric material derived from Li₂MgSiO₄ (LMS) for low-temperature cofired ceramic (LTCC) application is discussed in this paper. The LMS ceramics were prepared by the solid-state ceramic route. The calcination and sintering temperatures of LMS were optimized at 850°C/4 h and 1250°C/2 h, respectively, for the best density and dielectric properties. The crystal structure and microstructure of the ceramic were studied by the X-ray diffraction and scanning electron microscopic methods. The microwave dielectric properties of the ceramic were measured by the cavity perturbation method. The LMS sintered at 1250°C/2 h had ɛ_r=5.1 and tan δ=5.2 × 10⁻⁴ at 8 GHz. The sintering temperature of LMS is lowered from 1250°C/2 h to 850°C/2 h by the addition of both lithium borosilicate (LBS) and lithium magnesium zinc borosilicate (LMZBS) glasses. LMS mixed with 1 wt% LBS sintered at 925°C/2 h had ɛ_r=5.5 and tan δ=7 × 10⁻⁵ at 8 GHz. Two weight percent LMZBS mixed with LMS sintered at 875°C/2 h had ɛ_r=5.9 and tan δ=6.7 × 10⁻⁵ at 8 GHz.     

Effect of Glass Additions on BaO–TiO2–WO3 Microwave Ceramics

The effect of glass addition on the properties of BaO–TiO₂-WO₃ microwave dielectric material N-35, which has Q = 5900 and K = 35 at 7.2 GHz for samples sintered at 1360°C, was investigated. Several glasses including B₂O₃, SiO₂, 5ZnO–2B₂O₃, and nine other commercial glasses were selected for this study. Among these glasses, one with a 5 wt% addition of B₂O₃ to N-35, when sintered at 1200°C, had the best dielectric properties: Q = 8300 and K = 34 at 8.5 GHz. Both Q and K increased with firing temperature as well as with density. The Q of N-35, when sintered with a ZnO–B₂O₃ glass system, showed a sudden drop in the sintering temperature to about 1000°C. The results of XRD, thermal analysis, and scanning electron microscopy indicated that the chemical reaction between the dielectric ceramics and glass had a greater effect on Q than on the density. The effects of the glass content and the mixing process on the densification and microwave dielectric properties are also presented. Ball milling improved the densification and dielectric properties of the N-35 sintered with ZnO–B₂O₃.     

Structure, Thermal Behavior, Chemical Durability, and Optical Properties of the Na2O–Al2O3–TiO2–Nb2O5–P2O5 Glass System

The FTIR, Raman, UV-Vis, ³¹P MAS-NMR, DTA, and refractive index measurements have been combined to investigate a series of glasses with the general formula 20Na₂O–5Al₂O₃− x TiO₂–(45− x )Nb₂O₅–30P₂O₅, 15≤ x ≤45. The glass structure, as well as thermal, optical, and chemical durability properties, were then described as functions of the f _Nb/ f _Ti ratio. An increase of the f _Nb/ f _Ti ratio correlates with a decrease in length of the average phosphate chains linked through Nb–O–P and Ti–O–P bonds, with an increase in the glass stability and with increase in the linear refractive indices at 632.8 nm from 1.79 to 1.89. Furthermore, niobium is more effective than titanium in improving chemical durability.     

Dielectric Relaxations in Bi2O3–Nb2O5–NiO Cubic Pyrochlores

Dielectric properties of pyrochlores compositions from Bi₂O₃–Nb₂O₅–NiO system were analyzed. The dielectric properties are dominated with a low-temperature relaxation that is typical for Bi-pyrochlores. A vast pyrochlore homogeneity range that exists in this system allowed to correlate characteristics of the observed relaxations with a compositional variations within the A₂O'- and B₂O₆ pyrochlore sublattice. It was possible to make a distinction between different influences of the two sublattices, which can be satisfactorily described by the existing relaxation model for Bi_3/2ZnNb_3/2O₇. A new relaxor-like room temperature relaxation was found for Bi_1.6Ni_0.57Nb_1.43O_6.55.     

Effect of Li2CO3 Addition on the Sintering Temperature and Microwave Dielectric Properties of Mg2V2O7 Ceramics

Li₂CO₃ was added to Mg₂V₂O₇ ceramics in order to reduce the sintering temperature to below 900°C. At temperatures below 900°C, a liquid phase was formed during sintering, which assisted the densification of the specimens. The addition of Li₂CO₃ changed the crystal structure of Mg₂V₂O₇ ceramics from triclinic to monoclinic. The 6.0 mol% Li₂CO₃-added Mg₂V₂O₇ ceramic was well sintered at 800°C with a high density and good microwave dielectric properties of ɛ _r=8.2, Q × f =70 621 GHz, and τ_f=−35.2 ppm/°C. Silver did not react with the 6.0 mol% Li₂CO₃-added Mg₂V₂O₇ ceramic at 800°C. Therefore, this ceramic is a good candidate material in low-temperature co-fired ceramic multilayer devices.     

Effect of V2O5 Doping on the Sintering and Dielectric Properties of M-Phase Li1+x−yNb1−x−3yTix+4yO3 Ceramics

The effect of the addition of V₂O₅ on the structure, sintering and dielectric properties of M -phase (Li_{1+ x − y} Nb_{1− x −3 y} Ti _x +4 _y )O₃ ceramics has been investigated. Homogeneous substitution of V⁵⁺ for Nb⁵⁺ was obtained in LiNb_{0.6(1− x )}V_{0.6 x} Ti_0.5O₃ for x ≤ 0.02. The addition of V₂O₅ led to a large reduction in the sintering temperature and samples with x = 0.02 could be fully densified at 900°C. The substitution of vanadia had a relatively minor adverse effect on the microwave dielectric properties of the M -phase system and the x = 0.02 ceramics had [alt epsilon]_r= 66, Q × f = 3800 at 5.6 GHz, and τ_f= 11 ppm/°C. Preliminary investigations suggest that silver metallization does not diffuse into the V₂O₅-doped M -phase ceramics at 900°C, making these materials potential candidates for low-temperature cofired ceramic (LTCC) applications.     

Crystallization and Dielectric Properties of SrO–BaO–Nb2O5–SiO2 Tungsten-Bronze Glass-Ceramics

The crystallization and dielectric properties of SrO–BaO–Nb₂O₅–SiO₂ glass-ceramics have been investigated. Glass-ceramics that contain strontium barium niobate (SBN) as a primary crystalline phase, which has a tungsten bronze structure, are produced. The formation of crystalline secondary phases also has been studied. The SBN phase shows evidence of both surface nucleation and bulk nucleation, and the crystals have an average composition of Sr_0.47Ba_0.53Nb₂O₆. The dendritic morphology of the SBN crystals has been examined. The SBN content and composite dielectric constant each has been studied as a function of heating temperature/time. The highest SBN content and dielectric constant obtained in the present study are 42 vol% and 180, respectively. The dielectric constant of the glass-ceramics is determined primarily by the SBN content and the residual glass phase. The dielectric constant of the randomly oriented SBN crystal in the glass-ceramics is calculated, using dielectric mixture rules, to be ∼400.     

Investigation on the Microstructure and Dielectric Properties of BaTiO3–Nb2O5–Fe2O3 Materials Doped with La2O3

The influence of La₂O₃ doped on the microstructure and dielectric properties, including the phase structure, temperature dependence of permittivity, and the hysteresis loop of BaTiO₃–Nb₂O₅–Fe₂O₃ (BTNF) materials has been investigated in X-ray diffraction, SEM, and LCR analyzer, respectively. Experiments revealed that incorporation of proper content of La₂O₃ basically soluted in the lattice of BaTiO₃ and can control the grain-growth, reduce the dielectric loss of the BTNF materials. The development of microstructure promoted by the additives can result in the improvement of the dielectric constant. When the doping concentration of La₂O₃ was 3.846 wt%, the relative dielectric constant of the sample sintered at 1280°C only for 2 h could reach 4308, and improve the dielectric-temperature characteristics markedly. As a result, a novel Y5P can be achieved in the BTNF ceramics, which is very promising for practical use in Y5P multilayer ceramic capacitors.     

Crystallization of Monoclinic 2TiO2·5Nb2O5

Monoclinic 2TiO₂·5Nb₂O₅ crystallizes at 810° to 835°C from an amorphous material prepared by the simultaneous hydrolysis of titanium and niobium alkoxides. Crystallization isotherms are described by the contracting cube equation 1 − (1 − f)¹¹³= k(t − t₀); the activation energy is 315 kJ·mol⁻¹. Monoclinic 2TiO₂·5Nb₂O₅ transforms to the orthorhombic modification at ∼1200° to 1300°C.     

Deposition and Characterization of Li2O–SiO2–P2O5 Thin Films

Amorphous lithium electrolyte thin films, xLi₂O·ySiO₂·zP₂O₅, were deposited by rf magnetron sputtering of pure and mixed-phase lithium silicate, lithium phosphate, SiO₂, Li₂O, and Li₂CO₃ targets, and their compositions were determined using proton-induced y -ray emission spectroscopy, energy-dispersive X-ray analysis, Rutherford backscattering spectrometry, and atomic-emission spectroscopy. The deposition conditions were chosen to assure thermalization of the sputtered flux, which proved to be necessary in order to obtain a homogeneous distribution of Si and P in the films. Optical absorption and ac impedance measurements showed that glass-in-glass phase separation occurred in a large SiO₂-rich domain of the composition diagram. In contrast to bulk glasses, all of the Li₂O–SiO₂ films were phase-separated, including those with lithia contents larger than lithium disilicate. High-performance liquid chromatography measurements revealed that, analogous to bulk glasses, the addition of SiO₂ to Li₂O-P₂O₅ compositions reduced the number of phosphate anion dimers, trimers, and higher anion polymers in the films through the formation of -Si-O-P-bonds. However, in contrast to bulk glasses, the distribution of phosphate anion polymers followed closely the Flory distribution, with the fraction of anion polymers decreasing monotonically with increasing chain length.     

Studies in Lithium Oxide Systems: XI, Li2O–B2O3–P2O5

The glassforming region in the system was roughly outlined and liquidus data were obtained for the three joins LiPO₃-BPO₄, Li₄P₂O₇-BPO₄, and Li₃PO₄-Li₂B₄O₇. Compatibility relations for the ternary subsystems Li₄P₂O₇-BPO₄-P₂O₅ and Li₂O-Li₃PO₄-Li₂B₈O₁₃ were established. Two ternary compounds with the probable compositions 22Li₂O - 11B₂O₃ - 13P₂O₅ and 2Li₂O 3B₂O₃ P₂O₅ were detected.     

Microwave Dielectric Properties of Li2TiO3 Ceramics Doped with ZnO–B2O3 Frit

A type of new low sintering temperature ceramic, Li₂TiO₃ ceramic, has been found. Although it is difficult for the Li₂TiO₃ compound to be sintered compactly at temperatures above 1000°C for the volatilization of Li₂O, dense Li₂TiO₃ ceramics were obtained by conventional solid-state reaction method at the sintering temperature of 900°C with the addition of ZnO–B₂O₃ frit. The sintering behavior and microwave dielectric properties of Li₂TiO₃ ceramics with less ZnO–B₂O₃ frit (≤3.0 wt%) doping were investigated. The addition of ZnO–B₂O₃ frit can lower the sintering temperature of the Li₂TiO₃ ceramics, but it does not apparently degrade the microwave dielectric properties of the Li₂TiO₃ ceramics. Typically, the good microwave dielectric properties of ɛ_r=23.06, Q × f =32 275 GHz, τ_f = 35.79 ppm/°C were obtained for 2.5 wt% ZnO–B₂O₃ frit-doped Li₂TiO₃ ceramics sintered at 900°C for 2 h. The porosity was 0.08%. The Li₂TiO₃ ceramic system may be a promising candidate for low-temperature cofired ceramics applications.     

Sintering and Dielectric Characterization of Pseudoternary Compounds from the Bi2O3–TiO2–TeO2 System

Using X-ray diffraction analysis, scanning electron microscopy, thermogravimetry, and measurements of the dielectric properties up to the MW frequency range, the characterization of Bi₂Ti₃TeO₁₂, Bi₂TiTeO₈, and Bi₆Ti₅TeO₂₂ compounds, which all include Te⁶⁺, was performed. As the processes of Te⁶⁺ reduction and the evaporation of TeO₂-containing species contribute to the presence of secondary phases, the preparation of single-phase ceramics is rather difficult. To minimize the amount of secondary phases during the firing process, the pellets were muffled in a corresponding compound and then fired in an autoclave furnace under 10 bars of oxygen pressure. By sintering the Bi₂Ti₃TeO₁₂, Bi₂TiTeO₈, and Bi₆Ti₅TeO₂₂ between 840° and 1010°C, ceramics with ɛ_r ranging from 36 to 350, Q × f values from 220 to 12 500 GHz, and τ_f from +41 to +2600 ppm/K were obtained.     

Effect of Nb2O5/ZnO Addition on Microwave Properties of (Zr0.8Sn0.2)TiO4 Ceramics

The effects of Nb₂O₅ and ZnO addition on the dielectric properties, especially the quality factor, of (Zr_0.8Sn_0.2)TiO₄ (ZST) ceramics were investigated in terms of the sintered density acquired by the zinc. For ZST ceramics with 2 mol% added ZnO, the relative density of the samples decreased with >0.5 mol% addition of Nb₂O₅. On the other hand, for samples with 6 mol% added ZnO, the relative density remained >97%, even when the amount of Nb₂O₅ was increased to 2.0 mol%. When >0.5 mol% Nb₂O₅ was added, both the quality factor and the dielectric constant exhibited similar trends with sintered density. The ZST ceramics with 6 mol% added ZnO, especially, still manifested a quality factor >40 000 and a dielectric constant of 37, even when the amount of Nb₂O₅ was increased, values that are not explainable by the previously suggested electronic defect model.     

Sintering Characteristics in BaTiO3–Nb2O5–Co3O4 Ternary System: I, Electrical Properties and Microstructure

The influences of the Nb/Co ratio on electrical properties, densification behavior, and microstructural evolution were investigated on ceramics in the ternary system BaTiO₃-Nb₂O₅-Co₃O₄. Temperature-stable dielectrics were obtained using either a large amount of Nb + Co or a large Nb/Co ratio. The sintering characteristics and electrical properties were studied for the niobium-rich composition (Nb/Co = 3.00; Comp.N) and the cobalt-rich composition (Nb/Co = 1.67; Comp.C) with the same Nb + Co amount of 2 at.%. The temperature characteristic of the dielectric constant was flat, irrespective of the firing temperature, for Comp.N, whereas it was dependent largely on the firing temperature for Comp.C. The grains did not grow in Comp.N but grew in Comp.C. The reaction of Nb₂O₅ and Co₃O₄ with BaTiO₃ yielded secondary phases: Ba₆Ti₁₇O₄₀ phase for Comp.N, and a barium-poor, titanium-rich, and cobalt-rich phase for Comp.C. These secondary phases formed a liquid phase during firing. Comp.N contained a larger amount of the secondary phase than Comp.C. It was concluded that the liquid phase contributed little to densification and microstructural evolution in the system BaTiO₃-Nb₂O₅-Co₃O₄.