Enhancement of the electrical properties of poly(p‐phenylene vinylene) by the incorporation of silicon dioxide nanoparticles

The electrical properties of a poly(p‐phenylene vinylene) (PPV) conjugated polymer using silver (Ag) as a cathode were improved by the incorporation of silicon dioxide (SiO₂) nanoparticles. The current density of the Ag–PPV/SiO₂ nanocomposite system was higher than that of Ag–PPV. A lower level of interfacial oxidation was found in the Ag–PPV/SiO₂ nanocomposite than in Ag–PPV, confirming that a more complete elimination of residue occurred in the nanocomposite. This was due to the relatively large surface area of the PPV/SiO₂ nanocomposite film and the hydrophilic surface of the SiO₂ nanoparticles. The lower level of oxidation contributed to an improvement in the material's current–voltage characteristics. Morphology‐dependent current–voltage characteristics were enhanced by a large variation in the thickness of the Ag–PPV/SiO₂ nanocomposite film because an increased effective field strength could be induced in the thinner regions of the film. The incorporation of SiO₂ nanoparticles altered the effective film thickness and the amount of residue in the interior of the PPV without disrupting the structure of the conjugated polymer. The Ag cathode created a stable interface with the PPV film layer without causing the formation of an organic–metal complex, which would have obstructed electron injection. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of thin films of the poly(p‐phenylene vinylene) semiconducting polymer

Conjugated polymers have been the subject of many studies because of their widespread applications in electronic and optoelectronic devices. Poly(p‐phenylene vinylene) is a leading semiconducting polymer in optical applications. This work is focused on the development of thin films of poly(p‐phenylene vinylene) by spin coating and their characterization with Fourier transform infrared spectroscopy, X‐ray diffraction, and scanning electron microscopy to understand their changes. An empirical model has been developed to show the effect of the variables—the spin speed, polymer concentration, and spin time—on the film thickness. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Electroluminescence and photovoltaic properties of poly(p‐phenylene vinylene) derivatives with dendritic pendants

A copolymer of dendronized poly(p‐phenylene vinylene) (PPV), poly{2‐[3′,5′‐bis (2′‐ethylhexyloxy) bnenzyloxy]‐1,4‐phenylene vinylene}‐co‐poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylene vinylene] (BE‐co‐MEH–PPV), was synthesized with the Gilch route to improve the electroluminescence and photovoltaic properties of the dendronized PPV homopolymer. The polymer was characterized by ultraviolet–visible absorption spectroscopy, photoluminescence spectroscopy, and electrochemical cyclic voltammetry and compared with the homopolymers poly{2‐[3′, 5′‐bis(2‐ethylhexyloxy) benzyloxy‐1,4‐phenylene vinylene} (BE–PPV) and poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylenevinylene] (MEH–PPV). Polymer light‐emitting diodes based on the polymers with the configuration of indium tin oxide (ITO)/poly(3,4‐ethylene dioxythiophene) : poly(styrene sulfonate) (PEDOT : PSS)/polymer/Ca/Al were fabricated. The electroluminescence efficiency of BE‐co‐MEH–PPV reached 1.64 cd/A, which was much higher than that of BE–PPV (0.68 cd/A) and a little higher than that of MEH–PPV (1.59 cd/A). Photovoltaic properties of the polymer were studied with the device configuration of ITO/PEDOT : PSS/polymer : [6,6J‐phenyl‐C₆₁‐butyric acid methyl ester] (PCBM)/Mg/Al. The power conversion efficiency of the device based on the blend of BE‐co‐MEH–PPV and PCBM with a weight ratio of 1 : 3 reached 1.41% under the illumination of air mass 1.5 (AM1.5) (80 mW/cm²), and this was an improvement in comparison with 0.24% for BE–PPV and 1.32% for MEH–PPV under the same experimental conditions. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polymeric coatings for photostability enhancement of poly(p‐phenylene vinylene) derivative films

Poly(p‐phenylene vinylene) (PPV) derivatives are an important class of conjugated polymers, known for their applications as electroluminescent materials for light‐emitting devices and sensors. These derivatives are highly susceptible to photodegradation by the combined action of oxygen and light. Here, the use of various commercial polymers as protective coatings against the photodegradation of PPV derivatives was explored. Cast films of two similar PPV derivatives, poly[(2‐methoxy‐5‐n‐hexyloxy)‐p‐phenylene vinylene] and poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐p‐phenylene vinylene], were submitted to photodegradation by exposure to white light under atmospheric conditions in order to verify if the type of side chain (linear or branched) had an effect on the photodegradation. No significant differences in the photodegradation behaviour between the two polymers were noticed. The following commercial polymers were tested as protective coatings for the PPV derivative cast films: 99 and 80% hydrolysed poly(vinyl alcohol) (PVA) and starch. The best results were achieved using coatings of 99% hydrolysed PVA, which increased about 700 times the time necessary for complete degradation of the PPV derivative films. The results show the effectiveness of this coating in minimizing and, possibly, controlling the effects of the photodegradation of PPV derivative films, which can be useful in many applications, e.g. oxygen sensors. Copyright © 2009 Society of Chemical Industry     

Synthesis and characterization of novel phenyl‐substituted poly(p‐phenylene vinylene) derivatives

Two novel phenyl‐substituted poly(p‐phenylene vinylene) derivatives, poly{2‐[3′,4′‐(2″‐ethylhexyloxy)(3″,7″‐dimethyloctyloxy)benzene]‐1,4‐phenylenevinylene} (EDP‐PPV) and poly{2‐[3′,4′‐(2″‐ethylhexyloxy)(3″,7″‐dimethyloctyloxy)benzene]‐5‐methoxy‐1,4‐phenylenevinylene} (EDMP‐PPV), and their copolymer, poly{2‐[3′,4′‐(2″‐ethylhexyloxy)(3″,7″‐dimethyloctyloxy)benzene]‐1,4‐phenylene‐vinylene‐co‐2‐[3′,4′‐(2″‐ethylhexyloxy)(3″,7″‐dimethyloctyloxy)benzene]‐5‐methoxy‐1,4‐phenylenevinylene} (EDP‐co‐EDMP‐PPV; 4:1, 1:1, and 1:4), were successfully synthesized according to the Gilch route. The structures and properties of the monomers and the resulting conjugated polymers were characterized with ¹H‐NMR, ¹³C‐NMR, elemental analysis, gel permeation chromatography, thermogravimetric analysis, ultraviolet–visible absorption spectroscopy, and photoluminescence and electroluminescence (EL) spectroscopy. The EL polymers possessed excellent solubility in common solvents and good thermal stability with a 5% weight loss temperature of more than 380°C. The weight‐average molecular weights and polydispersity indices of EDP‐PPV, EDMP‐PPV, and EDP‐co‐EDMP‐PPV were 1.40–2.58 × 10⁵, and 1.19–1.52, respectively. Double‐layer light‐emitting diodes with the configuration of indium tin oxide/polymer/tris(8‐hydroxyquinoline)aluminum/Al devices were fabricated, and EDP‐co‐EDMP‐PPV (1:1) showed the highest EL performance and exhibited a maximum luminance of 1050 cd/m² at 19.5 V. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1259–1266, 2005     

Effect of interchain interaction on optical properties of poly(p‐phenylene vinylene) derivative containing oxadiazole in backbone

We have investigated the optical properties of poly [2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylene vinylene] containing oxadiazole in backbone (MEH‐OPPV) in dilute tetrahydrofuran solution and solid solution films. There is a large dihedral angle between the two adjacent monomer units in MEH‐OPPV, which restrains interchain interactions and destroys the conjugation of the polymer to result in blue shifted absorption and emission spectra. The red shifted photoluminescence (PL) peak is continuously changed in the solid solution films with increasing the concentration of MEH‐OPPV. Comparison with the dilute solution, an obvious shoulder peak at 465 nm is found in the UV–vis absorption and PL excitation (PLE) spectra of the MEH‐OPPV film. The intensity of the PLE shoulder at 465 nm is increased with the concentration of MEH‐OPPV in the solid solution films, which is connected with the aggregation of the MEH‐OPPV chains. The interchain interactions are restrained and the π‐stack aggregates of the polymer chains can not form in the MEH‐OPPV due to the large dihedral angle, and then the interchain species are effectively suppressed in the MEH‐OPPV films. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,characterization, and photophysical properties of novel poly(p‐phenylene vinylene) derivatives with conjugated thiophene as side chains

Two novel poly(p‐phenylene vinylene) (PPV) derivatives with conjugated thiophene side chains, P1 and P2, were synthesized by Wittig‐Horner reaction. The resulting polymers were characterized by ¹H‐NMR, FTIR, GPC, DSC, TGA, UV–Vis absorption spectroscopy and cyclic voltammetry (CV). The polymers exhibited good thermal stability and film‐forming ability. The absorption spectra of P1 and P2 showed broader absorption band from 300 to 580 nm compared with poly[(p‐phenylene vinylene)‐alt‐(2‐methoxy‐5‐octyloxy‐p‐phenylene vinylene)] (P3) without conjugated thiophene side chains. Cyclic voltammograms displayed that the bandgap was reduced effectively by attaching conjugated thiophene side chains. This kind of polymer appears to be interesting candidates for solar‐cell applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Luminescence properties of poly‐ (phenylene vinylene) derivatives

BACKGROUND: Conjugated polymers, especially those of the poly(phenylene vinylene) (PPV) family, are promising candidates as emission material in light‐emitting devices. The aim of this work was to investigate the dependence of the luminescence properties of PPV‐based derivatives on their polymer structure, especially side groups. RESULTS: Three PPV derivatives, BEHPPV, MEHPPV and MEHSPPV, were synthesised and characterised by photoluminescence (PL) and cathodoluminescence (CL) spectroscopies in the temperature range 10–300 K. PL and CL spectra of the polymers exhibit similar luminescence peaks, which undergo a blue shift with increasing temperature. The shift in wavelength is accompanied by variations in the relative intensities of emission peaks. Both BEHPPV and MEHPPV display emission characteristics of the PPV backbone, but the peak of MEHPPV shifts to a longer wavelength in comparison with the corresponding peak of BEHPPV at the same temperature. The luminescence spectra of MEHSPPV, which has a sulfanyl incorporated in the side chain, are considerably different from those of the two other derivatives. CONCLUSIONS: The results demonstrate that the luminescence properties depend strongly on the chain conformations of the conjugated backbone, which are affected by polymer side chains. Copyright © 2007 Society of Chemical Industry     

Cationic water‐soluble poly(p‐phenylene vinylene) for fluorescence sensors and electrostatic self‐assembly nanocomposites with quantum dots

Novel phthalocyanine amide polymers (Pc) based on 1,8-naphthalenediamine (Ar) as an aromatic amine and 1,4-diaminobutane (Al) as an aliphatic amine, were synthesized to improve the limited stabilization modes of conventional phthalocyanines. The metal-free phthalocyanines polymers (MF-Pc) were moderately soluble in DMSO only while the metalized forms (Cu&Ni-Pc) were completely insoluble. The structure of the samples was confirmed using Fourier transform infrared (FTIR), ultraviolet–visible spectrometry (UV–vis) and nuclear magnetic resonance (NMR). Additionally, the thermal stability and glass transition temperatures (T_g) were investigated by thermal gravimetric analyzer (TGA) and differential scanning calorimeter (DSC), respectively. The intercalation of the metal-free phthalocyanines, based on the aliphatic amine (MF-PcAl) and aromatic amine (MF-PcAr), into laponite from DMSO solution, was proved by X-ray diffraction (XRD). The basal space of laponite increased from 1.2 to 1.36 nm upon intercalation of MF-PcAl and extended more to 1.91 nm on using MF-PcAr as intercalant while the quaternized forms of MF-Pcs behaved likewise and could not widen the basal space of laponite to more than 1.43 nm which was attributed to the random distribution of the positive charges over the Pc chains which imposed confined arrangement inside the basal space and consequently narrower space than the attained one in the case of nonquaternized phthalocyanines. The plasticized PVC composites based on laponite treated with either MF-PcAl or MF-PcAr exhibited improved resistance to the UV radiation as revealed by the retention of the tensile strength and elongation at rupture after exposure to UV radiation for different time intervals. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Controlling the deposition of light‐emitting nanofibers/microfibers by the electrospinning of a poly(p‐phenylene vinylene) polyelectrolyte precursor

Poly(p‐phenylene vinylene) (PPV) nanofibers with disordered, helical, and yarn morphologies were controllably prepared by the electrospinning of a cationic polyelectrolyte precursor in an ethanol solution followed by thermal conversion. Through the tuning of the precursor solution properties and processing variables, the factors affecting the morphology of PPV fibers were studied. The diameter of these PPV nanofibers decreased with a decrease in the precursor concentration, and gradual blueshifts and changes in the relative intensity of the vibronic components in photoluminescence spectra were observed. These nanofibers with excellent fluorescent properties are potentially interesting for many applications such as micro‐ and nano‐optoelectronic devices and systems. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of poly(p‐phenylene diamine) and its corrosion inhibition effect on iron in 1M HCl

Water‐soluble poly(p‐phenylene diamine) was chemically synthesized. Its corrosion inhibition performance was evaluated for iron corrosion in 1M HCl at various concentrations, and the results were compared with that of the monomer. The corrosion inhibition properties were evaluated by polarization techniques and electrochemical impedance spectroscopy. The results showed that poly(p‐phenylene diamine) was a more efficient corrosion inhibitor than the monomer and gave an 85% inhibition efficiency at a concentration of 50 ppm, whereas the monomer gave an efficiency of 73% at 5000 ppm. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and properties of a soluble conjugated polymer,poly(2‐methoxy‐5‐N‐butoxy‐p‐phenylene vinylene)

The synthesis of poly(2‐methoxy‐5‐n‐butoxy‐p‐phenylene vinylene) (MBPPV) via a dehydrochlorination of 2‐methoxy‐5‐n‐butoxy‐α,α′‐dichloro‐p‐xylene is described. The soluble polymer was characterized by elemental analysis, Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance (NMR), and UV‐visible spectroscopy. The energy gap (Eg) of the polymer was 2.53 eV determined by cyclic voltammogram. Light‐emitting diode (LED) and light‐emitting electrochemical cell (LEC) with the polymer were fabricated. The LED displayed unipolar I‐V dependence with the turn‐on voltage at 4.2 V. I‐V curve of the LEC with poly(ethylene oxide) (PEO, Mw 2 × 10⁴) displayed mirror symmetry with the turn‐on voltage at 2.7 V, but to the device with PEO (Mw 5 × 10⁶) no mirror symmetry was observed, the turn‐on voltages at +2.7 V, −11.5 V. The emission maximum of the polymer in chloroform was at λ = 550 nm, whereas the emission maxima of the LED at 5.2 V and the LEC at 4.8 V were at λ = 566, 569 nm, respectively. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 2180–2185, 2000     

Synthesis and characterization of a kind of poly(3‐butylthiophene methine) with azo side groups

To enhance the third nonlinear optical properties of poly(thiophene methine), we synthesized a new kind of poly(3‐butylthiophene methine) with azo side groups: poly[(3‐butylthiophene‐2,5‐diyl)‐p‐(N,N‐dimethylamino)azobenzylidenequinomethane] (PBTDMABQ). PBTDMABQ and its intermediate product were characterized with IR, ultraviolet–visible, and ¹H‐NMR spectroscopy. The band gaps of PBTDMABQ were calculated to be 1.94 and 2.06 eV with two different models. The thermal stability, determined by thermogravimetric analysis, indicated that PBTDMABQ decomposed above 345°C. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1261–1265, 2005     

Synthesis and photovoltaic properties of dithienyl benzotriazole based poly(phenylene vinylene)s

Two new alternating copolymers based on dithienyl benzotriazole segment and phenylene vinyl unit were synthesized by Heck cross coupling method. The polymers exhibited broad absorption bands (from 300 nm to 752 nm for P1 , and from 300 nm to 654 nm for P2 ) in the UV‐visible region with optical bandgap ranging between 1.6 and 1.9 eV and proper electronic energy levels measured by cyclic voltammetry. The photovoltaic properties of the polymers as electron donors with 6.6‐phenyl C61‐butyric acid methyl ester as the electron acceptor in a bulk heterojunction structures were reported. Preliminary results showed moderate power conversion efficiency of 0.36% and 0.4%, respectively, under the illumination of AM 1.5, 100 mW/cm² with a device structure of ITO/PEDOT : PSS/polymer : PC₆₀BM (1 : 3)/Ca/Al. Furthermore, the side chain effect on properties has also been investigated. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Fabrication and characterization of planar and channel polymer waveguides. II. Poly(p‐phenylene benzobisthiazole) (PBZT) films

Solutions of poly(p‐phenylene benzobisthiazole) (PBZT) in methane sulfonic acid (MSA) were prepared and studied. Solutions with concentrations less than 0.04 wt % PBZT were characterized by dilute solution viscometry. Planar PBZT waveguides were spin‐coated from a 0.5 wt % PBZT solution onto oxidized silicon wafers. The optical attentuation of the resulting polymer waveguides was measured and found to depend on both the thickness of the oxide layer on the silicon substrate and also the wavelength of the incident light. The lowest optical loss recorded for PBZT in this investigation was 4.81 ± 1.39 dB/cm at 834 nm. This work thus demonstrates the successful fabrication of PBZT into thin‐film planar waveguides. The PBZT films prepared here also show improved optical characteristics over PBZT films prepared previously by either extrusion or spin coating. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 1448–1456, 2000     

Synthesis and magnetic properties of novel complexes of poly(N‐2‐thiazolylmethacrylamide) with Nd(III), Pr(III), and Sm(III)

N‐2‐Thiazolylmethacrylamide (NTMA) was polymerized by a radical route to obtain the polymer in good yields. The complexes of PolyNTMA with three rare earth ions Nd(III), Pr(III), and Sm(III) were prepared for the first time. FTIR and ¹H NMR were applied to characterize these materials. The magnetic behavior of PolyNTMA–metal complexes was examined as a function of applied magnetic field at 4 K and as a function of temperature (4–300 K) at an applied magnetic field of 30 kOe. It was found that Pr(III) complex exhibits an antiferromagnetic property, while Nd(III) and Sm(III) complexes exhibit a special magnetic property different from the typical magnet. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1289–1293, 2006     

Trace metal ion retention properties of crosslinked poly(4‐vinylpyridine) and poly(acrylic acid)

The crosslinked resins poly(4‐vinylpiridine) (PVPy) and poly(acrylic acid) (PAA) were obtained by radical polymerization. PVPy shows monodentate ligands and PAA at basic pH is basically as acrylate anion, which can contain end‐carboxylates groups or form a bridge acting as mono‐ or bidentate ligands. The retention properties for trace metal ions from saline aqueous solutions and natural seawaters of these two resins were investigated by Batch equilibrium procedure. The metal ions studied were Cu(II), Pb(II), Cd(II), and Ni(II). The following effects were studied: pH, contact time, amount of the adsorbent, temperature, and salinity. The resin PVPy showed a high affinity for Cd(II) and PAA for Cu(II) and Cd(II). The metal ions were determined in the filtrate by atomic absorption spectrometry. By the treatment of the loaded resin with 4M HNO₃, it was possible to remove completely the Cu(II) ions. The retention properties of the resins were studied for trace metal ions present in the natural seawaters. Both resins showed a high affinity for Cd(II) when the natural seawater contained Cu(II) and Cd(II). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2908–2916, 2004     

Poly(2‐acrylamido glycolic acid‐co‐2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid): Synthesis,characterization, and retention properties for environmentally impacting metal ions

Poly(2‐acrylamido glycolic acid‐co‐2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid) [P(AGA‐co‐APSA)] was synthesized by radical polymerization in an aqueous solution. The water‐soluble polymer, containing secondary amide, hydroxyl, carboxylic, and sulfonic acid groups, was investigated, in view of their metal‐ion‐binding properties, as a polychelatogen with the liquid‐phase polymer‐based retention technique under different experimental conditions. The investigated metal ions were Ag⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Cr³⁺, and these were studied at pHs 3, 5, and 7. P(AGA‐co‐APSA) showed efficient retention of all metal ions at the pHs studied, with a minimum of 60% for Co(II) at pH 3 and a maximum close to 100% at pH 7 for all metal ions. The maximum retention capacity (n metal ion/n polymer) ranged from 0.22 for Cd²⁺ to 0.34 for Ag⁺. The antibacterial activity of Ag⁺, Cu²⁺, Zn²⁺, and Cd²⁺ polymer–metal complexes was studied, and P(AGA‐co‐APSA)–Cd²⁺ presented selective antibacterial activity for Staphylococcus aureus with a minimum inhibitory concentration of 2 μg/mL. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterizations of poly(4‐alkylthiazole vinylene)

Two poly(thiazole vinylene) derivatives, poly(4‐hexylthiazole vinylene) (P4HTzV) and poly(4‐nonylthiazole vinylene) (P4NTzV), were synthesized by Pd‐catalyzed Stille coupling method. The polymers are soluble in common organic solvents such as o‐dichlorobenzene and chloroform, and possess good thermal stability. P4HTzV and P4NTzV films exhibit broad absorption bands at 400–720 nm with an optical bandgap of 1.77 eV and 1.74 eV, respectively. The HOMO (the highest occupied molecular orbital) energy levels of P4HTzV and P4NTzV are ?5.11 and ?5.12 eV, respectively, measured by cyclic voltammetry. Preliminary results of the polymer solar cells based on P4HTzV : PC₆₁BM ([6,6]‐phenyl‐C‐61‐butyric acid methyl ester) (1 : 1, w/w) show a power conversion efficiency of 0.21% with an open‐circuit voltage of 0.55 V and a short circuit current density of 1.11 mA cm^?2, under the illumination of AM1.5G, 100 mW cm^?2. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Branched poly(p‐phenylenevinylene): Synthesis,optical and electrochemical properties

A series of poly(p‐phenylene vinylene) (PPV) derivatives with phenylene vinylene side chains (branched PPVs), PPV0, PPV1, PPV2, and PPV3, were synthesized by the Heck coupling reaction and characterized by TGA, absorption spectra, photoluminescence (PL) spectra, and electrochemical cyclic voltammetry. The branched PPVs showed two absorption peaks in the UV–vis region, corresponding to the conjugated side chains (UV absorption) and the main chains (the visible absorption). Especially the absorption spectrum of PPV3 covers a broad wavelength range from 300 to 500 nm. Introducing the electron‐donating alkoxy substituents on the PPV main chains and increasing the content of the alkoxy groups lead to bathochromic shift of both absorption and PL spectra from PPV1 to PPV2 to PPV3. The onset oxidation potential of the branched PPVs is lower by 0.1–0.2 V than that of PPV, indicating that the electron‐donating ability of the branched PPVs enhanced in comparison with that of PPV. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008