High Electron Mobility and Ambipolar Charge Transport in Binary Blends of Donor and Acceptor Conjugated Polymers

High electron mobility and ambipolar charge transport are observed in phase‐separated binary blends of n‐type poly(benzobisimidazobenzophenanthroline) (BBL) with p‐type polymer semiconductors, poly[(thiophene‐2,5‐diyl)‐alt‐(2,3‐diheptylquinoxaline‐5,8‐diyl)] (PTHQx) and poly(10‐hexylphenoxazine‐3,7‐diyl‐alt‐3‐hexyl‐2,5‐thiophene) (POT). Atomic force microscopy (AFM) and transmission electron microscopy (TEM) show phase‐separated domains of 50–300 nm in the binary blend thin films. The TEM images and electron diffraction of BBL/PTHQx blends show the growth of single‐crystalline phases of PTHQx within the BBL matrix. A relatively high electron mobility (1.0 × 10^–3 cm² V^–1 s^–1) that is constant over a wide blend‐composition range is observed in the PTHQx blend field‐effect transistors (FETs). Ambipolar charge transport is observed in both blend systems at a very high concentration of the p‐type semiconductor (≥90 wt % PTHQx or ≥80 wt % POT). Ambipolar charge transport is exemplified by an electron mobility of 1.4 × 10^–5 cm² V^–1 s^–1 and a hole mobility of 1.0 × 10^–4 cm² V^–1 s^–1 observed in the 98 wt % PTHQx blend FETs. These results show that ambipolar charge transport and the associated carrier mobilities in blends of conjugated polymer semiconductors have a complex dependence on the blend composition and the phase‐separated morphology.     

Molecular Packing‐Induced Transition between Ambipolar and Unipolar Behavior in Dithiophene‐4,9‐dione‐Containing Organic Semiconductors

By changing the packing motif of the conjugated cores and the thin‐film microstructures, unipolar organic semiconductors may be converted into ambipolar materials. A combined experimental and theoretical investigation is conducted on the thin‐film organic field‐effect transistors (OFETs) of three organic semiconductors that have the same conjugated core structure of s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐4,9‐dione but with different n‐alkyl groups. The optical and electrochemical measurements suggest that the three organic semiconductors have very similar energy levels; however, their OFETs exhibit dramatically different transport characteristics. Transistors based on compound 1a or 1c show ambipolar transport properties, while those based on compound 1b show p‐type unipolar behavior. Specifically, compound 1c is characterized as a good ambipolar semiconductor with the highest electron mobility of 0.22 cm² V^?1 s^?1 and the highest hole mobility of 0.03 cm² V^?1 s^?1. Complementary metal oxide semiconductor (CMOS) inverters incorporated with compound 1c show sharp inversions with high gains above 50. Theoretical investigations reveal that the drastic difference in the transport properties of the three materials is due to the difference in their molecular packing and film microstructures.     

Bithienopyrroledione‐Based Copolymers,Versatile Semiconductors for Balanced Ambipolar Thin‐Film Transistors and Organic Solar Cells with V oc > 1 V

Conjugated polymer semiconductors P1 and P2 with bithienopyrroledione (bi‐TPD) as acceptor unit are synthesized. Their transistor and photovoltaic performances are investigated. Both polymers display high and balanced ambipolar transport behaviors in thin‐film transistors. P1‐ based devices show an electron mobility of 1.02 cm² V^?1 s^?1 and a hole mobility of 0.33 cm² V^?1 s^?1, one of the highest performance reported for ambipolar polymer transistors. The electron and hole mobilities of P2 transistors are 0.36 and 0.16 cm² V^?1 s^?1, respectively. The solar cells with PC₇₁BM as the electron acceptor and P1/P2 as the donor exhibit a high V _oc about 1.0 V, and a power conversion efficiency of 6.46% is observed for P1‐ based devices without any additives and/or post treatment. The high performance of P1 and P2 is attributed to their crystalline films and short π–π stacking distance (<3.5 Å). These results demonstrate (1) bi‐TPD is an excellent versatile electron‐deficient unit for polymer semiconductors and (2) bi‐TPD‐based polymer semiconductors have potential applications in organic transistors and organic solar cells.     

Visible‐Near Infrared Absorbing Polymers Containing Thienoisoindigo and Electron‐Rich Units for Organic Transistors with Tunable Polarity

Systematic creation of polymeric semiconductors from novel building blocks is critical for improving charge transport properties in organic field‐effect transistors (OFETs). A series of ultralow‐bandgap polymers containing thienoisoindigo (TIIG) as a thiophene analogue of isoindigo (IIG) is synthesized. The UV‐Vis absorptions of the TIIG‐based polymers ( PTIIG‐T , PTIIG‐Se , and PTIIG‐DT ) exhibit broad bands covering the visible to near‐infrared range of up to 1600 nm. All the polymers exhibit unipolar p‐channel operations with regard to gold contacts. PTIIG‐DT with centrosymmetric donor exhibits a maximum mobility of 0.20 cm² V^?1 s^?1 under gold contacts, which is higher than those of the other polymers containing axisymmetric donors. Intriguingly, OFETs fabricated with aluminum electrodes show ambipolar charge transport with hole and electron mobilities of up to 0.28 ( PTIIG‐DT ) and 0.03 ( PTIIG‐T ) cm² V^?1 s^?1, respectively. This is a record value for the hitherto reported TIIG‐based OFETs. The finding demonstrates that TIIG‐based polymers can potentially function as either unipolar or ambipolar semiconductors without reliance on the degree of electron affinity of the co‐monomers.     

ε‐Branched Flexible Side Chain Substituted Diketopyrrolopyrrole‐Containing Polymers Designed for High Hole and Electron Mobilities

Based on the integrated consideration and engineering of both conjugated backbones and flexible side chains, solution‐processable polymeric semiconductors consisting of a diketopyrrolopyrrole (DPP) backbone and a finely modulated branching side chain (ε‐branched chain) are reported. The subtle change in the branching point from the backbone alters the π?π stacking and the lamellar distances between polymer backbones, which has a significant influence on the charge‐transport properties and in turn the performances of field‐effect transistors (FETs). In addition to their excellent electron mobilities (up to 2.25 cm² V^?1 s^?1), ultra‐high hole mobilities (up to 12.25 cm² V^?1 s^?1) with an on/off ratio (I_on/I_off) of at least 10⁶ are achieved in the FETs fabricated using the polymers. The developed polymers exhibit extraordinarily high electrical performance with both hole and electron mobilities superior to that of unipolar amorphous silicon.     

High‐Performance Ambipolar Polymers Based on Electron‐Withdrawing Group Substituted Bay‐Annulated Indigo

For donor–acceptor conjugated polymers, it is an effective strategy to improve their electron mobilities by introducing electron‐withdrawing groups (EWGs, such as F, Cl, or CF₃) into the polymer backbone. However, the introduction of different EWGs always requires a different synthetic approach, leading to additional arduous work. Here, an effective two‐step method is developed to obtain EWG substituted bay‐annulated indigo (BAI) units. This method is effective to introduce various EWGs (F, Cl, or CF₃) into BAI at different substituted positions. Based on this method, EWG substituted BAI acceptors, including 2FBAI, 2ClBAI, and 2CF₃BAI, are reported for the first time. Furthermore, four polymers of PBAI‐V, P2FBAI‐V, P2ClBAI‐V, and P4OBAI‐V are developed. All the polymers show ambipolar transport properties. Particularly, P2ClBAI‐V exhibits remarkable hole and electron mobilities of 4.04 and 1.46 cm² V^?1 s^?1, respectively. These mobilities are among the highest values for BAI‐based polymers.     

Integrating Efficient Optical Gain in High‐Mobility Organic Semiconductors for Multifunctional Optoelectronic Applications

Simultaneously integrating efficient optical gain and high charge carrier mobility in organic semiconductors for multifunctional optoelectronic applications is challenging. Here, a new thiophene/phenylene derivative, 5,5′‐bis(2,2‐diphenylvinyl)‐bithiophene (BDPV2T), containing an appropriate butterfly molecular configuration in a π‐conjugated structure, is designed to achieve both solid‐state emission and charge transport properties. The prepared BDPV2T crystals exhibit excellent light‐emitting characteristics with a photoluminescence quantum yield of 30%, low light‐amplification threshold of 8 kW cm^?2, high optical net gain up to 70 cm^?1, and high charge carrier mobility up to 1 cm² V^?1 s^?1 in their J‐aggregate single crystals. These BDPV2T single crystal characteristics ensure their application potential for photodetectors, field‐effect transistors, and light‐emitting transistors. High optoelectronic performances are achieved with photoresponsivity of 2.0 × 10³ A W^?1 and light on/off ratio of 5.4 × 10⁵ in photodetectors, and efficient ambipolar charge transport (µ_h: 0.14 cm² V^?1 s^?1, µ_e: 0.02 cm² V^?1 s^?1) and electroluminescence characteristics in light‐emitting transistors. The remarkably integrated optoelectronic properties of BDPV2T suggest it is a promising candidate for organic multifunctional and electrically pumped laser applications.     

Hole Injection in a Model Fluorene–Triarylamine Copolymer

Recent developments in synthesis and purification have yielded conjugated polymers with hole mobilities exceeding 0.01 cm² V^?1 s^?1. Essential to harvesting the potential of these materials in organic light emitting diodes (OLEDs) is the identification of suitable ohmic contacts. Using a model fluorene copolymer that shows high‐mobility, non‐dispersive hole transport, it is demonstrated that electrodes commonly used as anodes in OLEDs are very poor hole injectors. Injection from Au and indium tin oxide anodes is limited by energy barriers of 0.75 and 0.65 eV, respectively, and the injected current is found to be temperature independent—a prediction that was not reproduced by the leading injection model for disordered organic semiconductors. Injection from a poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonate) (PEDOT:PSS) anode, on the other hand, is found to become less efficient with electric field, a behavior which is currently not understood. In thinner poly[(9,9′‐dioctylfluorenyl‐2,7‐diyl)‐co‐(4,4′‐(N‐(4‐sec‐butyl))diphenylamine)] films, which are of relevance to OLEDs, ohmic losses on the PEDOT:PSS layer are found to limit the flow of current. These results illustrate the opportunity to further improve the performance of OLEDs as well as the challenge posed by high mobility conjugated polymers for the design of hole injection layers.     

High Bulk Electron Mobility Diketopyrrolopyrrole Copolymers with Perfluorothiophene

The question of designing high electron mobility polymers by increasing the planarization using diffusive nonbonding heteroatom interactions in diketopyrrolopyrrole polymers is addressed in this. For this, three different diketopyrrolo[3,4‐c]pyrrole (DPP) derivatives with thienyl‐, 2‐pyridinyl‐, and phenyl‐flanked cores are copolymerized with an electron‐rich thiophene unit as well as an electron‐deficient 3,4‐difluorothiophene unit as comonomer to obtain diverse polymeric DPPs which vary systematically in their structures. The crystallinity differs significantly with clear trends on varying both flanking unit and comonomer. The optical gap and energy levels depend more on the nature of the flanking aryl units rather than on fluorination. Additionally, the charge transport properties are compared using different methods to differentiate between interface or orientation effects and bulk charge carrier transport. In organic field effect transistor devices with very high electron as well as hole mobilities (up to 0.6 cm² V^?1 s^?1) are obtained and fluorination leads to a more pronounced n‐type nature in all polymers, resulting in ambipolar behavior in otherwise p‐type materials. In contrast, space‐charge limited current measurements show a strong influence of the flanking units only on electron mobilities. Especially, the elegant synthetic strategy of combining pyridyl flanking units with difluorothiophene as the comonomer culminates in a record bulk electron mobility of 4.3 × 10^?3 cm² V^?1 s^?1 in polymers.     

Tuning the Charge Carrier Polarity of Organic Transistors by Varying the Electron Affinity of the Flanked Units in Diketopyrrolopyrrole‐Based Copolymers

Fine‐tuning of the charge carrier polarity in organic transistors is an important step toward high‐performance organic complementary circuits and related devices. Here, three new semiconducting polymers, namely, pDPF‐DTF2, pDPSe‐DTF2, and pDPPy‐DTF2, are designed and synthesized using furan, selenophene, and pyridine flanking group‐based diketopyrrolopyrrole cores, respectively. Upon evaluating their electrical properties in transistor devices, the best performance has been achieved for pDPSe‐DTF2 with the highest and average hole mobility of 1.51 and 1.22 cm² V^?1 s^?1, respectively. Most intriguingly, a clear charge‐carrier‐polarity change is observed when the devices are measured under vacuum. The pDPF‐DTF2 polymer exhibits a balanced ambipolar performance with the µ_h/µ_e ratio of 1.9, whereas pDPSe‐DTF2 exhibits p‐type dominated charge carrier transport properties with the µ_h/µ_e ratio of 26.7. Such a charge carrier transport change is due to the strong electron‐donating nature of the selenophene. Furthermore, pDPPy‐DTF2 with electron‐withdrawing pyridine flanking units demonstrates unipolar n‐type charge transport properties with an electron mobility as high as 0.20 cm² V^?1 s^?1. Overall, this study demonstrates a simple yet effective approach to switch the charge carrier polarity in transistors by varying the electron affinity of flanking groups of the diketopyrrolopyrrole unit.     

Solution‐Processed High‐Performance Tetrathienothiophene‐Based Small Molecular Blends for Ambipolar Charge Transport

Four soluble dialkylated tetrathienoacene ( TTAR) ‐based small molecular semiconductors featuring the combination of a TTAR central core, π‐conjugated spacers comprising bithiophene ( bT ) or thiophene ( T ), and with/without cyanoacrylate ( CA ) end‐capping moieties are synthesized and characterized. The molecule DbT‐TTAR exhibits a promising hole mobility up to 0.36 cm² V^?1 s^?1 due to the enhanced crystallinity of the microribbon‐like films. Binary blends of the p‐type DbT‐TTAR and the n‐type dicyanomethylene substituted dithienothiophene‐quinoid ( DTTQ‐11 ) are investigated in terms of film morphology, microstructure, and organic field‐effect transistor (OFET) performance. The data indicate that as the DbT‐TTAR content in the blend film increases, the charge transport characteristics vary from unipolar (electron‐only) to ambipolar and then back to unipolar (hole‐only). With a 1:1 weight ratio of DbT‐TTAR DTTQ‐11 in the blend, well‐defined pathways for both charge carriers are achieved and resulted in ambipolar transport with high hole and electron mobilities of 0.83 and 0.37 cm² V^?1 s^?1, respectively. This study provides a viable way for tuning microstructure and charge carrier transport in small molecules and their blends to achieve high‐performance solution‐processable OFETs.     

Inversion of Dominant Polarity in Ambipolar Polydiketopyrrolopyrrole with Thermally Removable Groups

A narrow bandgap polymeric semiconductor, BOC‐PTDPP , comprising alkyl substituted diketopyrrolopyrrole (DPP) and tert‐butoxycarbonyl (t‐BOC)‐protected DPP, is synthesized and used in organic field‐effect transistors (OFETs). The polymer films are prepared by solution deposition and thermal annealing of precursors featuring thermally labile t‐BOC groups. The effects of the thermal cleavage on the molecular packing structure in the polymer thin films are investigated using thermogravimetric analysis (TGA), UV‐vis spectroscopy, atomic force microscopy (AFM), Fourier transform infrared (FT‐IR) spectroscopy, and X‐ray diffraction (XRD) analysis. Upon utilization of solution‐shearing process, integrating the ambipolar BOC‐PTDPP into transistors shows p‐channel dominant characteristics, resulting in hole and electron mobilities as high as 1.32 × 10^?2 cm² V^?1 s^?1 and 2.63 × 10^?3 cm² V^?1 s^?1, which are about one order of magnitude higher than those of the drop‐cast films. Very intriguingly, the dominant polarity of charge carriers changes from positive to negative after the thermal cleavage of t‐BOC groups at 200 °C. The solution‐sheared films upon subsequent thermal treatment show superior electron mobility (μ_e = 4.60 × 10^?2 cm² V^?1 s^?1), while the hole mobility decreases by one order of magnitude (μ_h = 4.30 × 10^?3 cm² V^?1 s^?1). The inverter constructed with the combination of two identical ambipolar OFETs exhibits a gain of ～10. Reported here for the first time is a viable approach to selectively tune dominant polarity of charge carriers in solution‐processed ambipolar OFETs, which highlights the electronically tunable ambipolarity of thermocleavable polymer by simple thermal treatment.     

Alkoxy‐Functionalized Thienyl‐Vinylene Polymers for Field‐Effect Transistors and All‐Polymer Solar Cells

π‐conjugated polymers based on the electron‐neutral alkoxy‐functionalized thienyl‐vinylene (TVTOEt) building‐block co‐polymerized, with either BDT (benzodithiophene) or T2 (dithiophene) donor blocks, or NDI (naphthalenediimide) as an acceptor block, are synthesized and characterized. The effect of BDT and NDI substituents (alkyl vs alkoxy or linear vs branched) on the polymer performance in organic thin film transistors (OTFTs) and all‐polymer organic photovoltaic (OPV) cells is reported. Co‐monomer selection and backbone functionalization substantially modifies the polymer MO energies, thin film morphology, and charge transport properties, as indicated by electrochemistry, optical spectroscopy, X‐ray diffraction, AFM, DFT calculations, and TFT response. When polymer P7 is used as an OPV acceptor with PTB7 as a donor, the corresponding blend yields TFTs with ambipolar mobilities of μ_e = 5.1 × 10^?3 cm² V^–1 s^–1 and μ_h = 3.9 × 10^?3 cm² V^–1 s^–1 in ambient, among the highest mobilities reported to date for all‐polymer bulk heterojunction TFTs, and all‐polymer solar cells with a power conversion efficiency (PCE) of 1.70%, the highest reported PCE to date for an NDI‐polymer acceptor system. The stable transport characteristics in ambient and promising solar cell performance make NDI‐type materials promising acceptors for all‐polymer solar cell applications.     

A Timely Synthetic Tailoring of Biaxially Extended Thienylenevinylene‐Like Polymers for Systematic Investigation on Field‐Effect Transistors

Considering there is growing interest in the superior charge transport in the (E)‐2‐(2‐(thiophen‐2‐yl)‐vinyl)thiophene (TVT)‐based polymer family, an essential step forward is to provide a deep and comprehensive understanding of the structure–property relationships with their polymer analogs. Herein, a carefully chosen set of DPP‐TVT‐n polymers are reported here, involving TVT and diketopyrrolopyrrole (DPP) units that are constructed in combination with varying thiophene content in the repeat units, where n is the number of thiophene spacer units. Their OFET characteristics demonstrate ambipolar behavior; in particular, with DPP‐TVT‐0 a nearly balanced hole and electron transport are observed. Interestingly, the majority of the charge‐transport properties changed from ambipolar to p‐type dominant, together with the enhanced hole mobilities, as the electron‐donating thiophene spacers are introduced. Although both the lamellar d‐spacings and π‐stacking distances of DPP‐TVT‐n decreased with as the number of thiophene spacers increased, DPP‐TVT‐1 clearly shows the highest hole mobility (up to 2.96 cm² V^?1 s^?1) owing to the unique structural conformations derived from its smaller paracrystalline distortion parameter and narrower plane distribution relative to the others. These in‐depth studies should uncover the underlying structure–property relationships in a relevant class of TVT‐like semiconductors, shedding light on the future design of top‐performing semiconducting polymers.     

Rational Design of High‐Mobility Semicrystalline Conjugated Polymers with Tunable Charge Polarity: Beyond Benzobisthiadiazole‐Based Polymers

High‐mobility semiconducting polymers composed of arylene vinylene and dithiophene‐thiadiazolobenzotriazole (SN) units are developed by three powerful design strategies, namely, backbone engineering, heteroatom substitution, and side‐chain engineering. First, starting from the quaterthiophene‐SN copolymer, a vinylene spacer is inserted into the quaterthiophene unit for constructing highly‐planar backbones. Second, heteroatoms (O and N atoms) are incorporated into the thienylene vinylene moieties to tune the electronic properties and intermolecular interactions. Third, the alkyl side chains are optimized to tune the solubility and self‐assembly properties. As a consequence, a remarkable thin film transistor performance is obtained. The very high hole mobility of 3.22 cm² V^?1 s^?1 is achieved for the p‐type polymer, PSNVT‐DTC8, which is the highest value ever reported for the polymers based on the benzobisthiadiazole and its analogs. Moreover, heteroatom substitution efficiently varies the charge polarity of the polymers as in the case of the N atom substituted PSNVT_z‐DTC16 displaying n‐type dominant ambipolar properties with the electron mobility of 0.16 cm² V^?1 s^?1. Further studies using grazing‐incidence wide‐angle X‐ray scattering and atomic force microscopy have revealed the high crystallinities of the polymer thin films with strong π–π interactions and suitable polymer packing orientations.     

Boosting the Charge Transport Property of Indeno[1,2‐b]fluorene‐6,12‐dione though Incorporation of Sulfur‐ or Nitrogen‐Linked Side Chains

Alkyl chains are basic units in the design of organic semiconductors for purposes of enhancing solubility, tuning electronic energy levels, and tailoring molecular packing. This work demonstrates that the carrier mobilities of indeno[1,2‐b ]fluorene‐6,12‐dione ( IFD )‐based semiconductors can be dramatically enhanced by the incorporation of sulfur‐ or nitrogen‐linked side chains. Three IFD derivatives possessing butyl, butylthio, and dibutylamino substituents are synthesized, and their organic field‐effect transistors (OFET) are fabricated and characterized. The IFD possessing butyl substituents exhibits a very poor charge transport property with mobility lower than 10^?7 cm² V^?1 s^?1. In contrast, the hole mobility is dramatically increased to 1.03 cm² V^?1 s^?1 by replacing the butyl units with dibutylamino groups ( DBA‐IFD ), while the butylthio‐modified IFD ( BT‐IFD ) derivative exhibits a high and balanced ambipolar charge transport property with the maximum hole and electron mobilities up to 0.71 and 0.65 cm² V^?1 s^?1, respectively. Moreover, the complementary metal–oxide–semiconductor‐like inverters incorporated with the ambipolar OFETs shows sharp inversions with a maximum gain value up to 173. This work reveals that modification of the aromatic core with heteroatom‐linked side chains, such as alkylthio or dialkylamino, can be an efficient strategy for the design of high‐performance organic semiconductors.     

Effect of Spacer Length of Siloxane‐Terminated Side Chains on Charge Transport in Isoindigo‐Based Polymer Semiconductor Thin Films

A series of isoindigo‐based conjugated polymers (PII2F‐C_mSi, m = 3–11) with alkyl siloxane‐terminated side chains are prepared, in which the branching point is systematically “moved away” from the conjugated backbone by one carbon atom. To investigate the structure–property relationship, the polymer thin film is subsequently tested in top‐contact field‐effect transistors, and further characterized by both grazing incidence X‐ray diffraction and atomic force microscopy. Hole mobilities over 1 cm² V^?1 s^?1 is exhibited for all soluble PII2F‐C_mSi (m = 5–11) polymers, which is 10 times higher than the reference polymer with same polymer backbone. PII2F‐C₉Si shows the highest mobility of 4.8 cm² V^?1 s^?1, even though PII2F‐C₁₁Si exhibits the smallest π–π stacking distance at 3.379 Å. In specific, when the branching point is at, or beyond, the third carbon atoms, the contribution to charge transport arising from π–π stacking distance shortening becomes less significant. Other factors, such as thin‐film microstructure, crystallinity, domain size, become more important in affecting the resulting device's charge transport.     

Effect of Donor Molecular Structure and Gate Dielectric on Charge‐Transporting Characteristics for Isoindigo‐Based Donor–Acceptor Conjugated Polymers

This study investigates the effect of the molecular structure of three different donor units, naphthalene (Np), bithiophene (BT), and thiophene–vinylene–thiophene (TVT), in isoindigo (IIG)‐based donor –acceptor conjugated polymers (PIIG‐Np, PIIG‐BT and PIIG‐TVT) on the charge carrier mobility of organic field‐effect transistors (OFETs). The charge transport properties of three different IIG‐based polymers strongly depend on donor units. PIIG–BT OFETs showed 50 times higher hole mobility (0.63 cm² V^?1 s^?1) than PIIG–TVT and PIIG–Np ones of ≈ 0.01 cm² V^?1 s^?1 with CYTOP dielectric though the BT units have less planarity than the TVT and Np units. The reasons for the different mobility in IIG‐based polymers are studied by analyzing the energy structure by absorption spectra, calculating transport levels by density functional theory, investigating the in‐ and out‐of‐plane crystallinity of thin film by grazing‐incidence wide‐angle X‐ray scattering, and extracting key transport parameters via low‐temperature measurements. By combining theoretical, optical, electrical, and structural analyses, this study finds that the large difference in OFET mobility mainly originates from the transport disorders determined by the different microcrystal structure, rather than the intrinsic transport properties in isolated chains for different polymers.     

Quinoidal Molecules as a New Class of Ambipolar Semiconductor Originating from Amphoteric Redox Behavior

The two small molecules, quinoidal bithiophene (QBT) and quinoidal biselenophene (QBS), are designed based on a quinoid structure, and synthesized via a facile synthetic route. These quinoidal molecules have a reduced band gap and an amphoteric redox behavior, which is caused by an extended delocalization. Due to such properties, organic field‐effect transistors based on QBT and QBS have shown balanced ambipolar characteristics. After thermal annealing, the performances of the devices are enhanced by an increase in crystallinity. The field‐effect hole and electron mobilities are measured to be 0.031 cm² V^?1 s^?1 and 0.005 cm² V^?1 s^?1 for QBT, and 0.055 cm² V^?1 s^?1 and 0.021 cm² V^?1 s^?1 for QBS, respectively. In addition, we investigate the effect of chalcogen atoms (S and Se) on the molecular properties. The optical, electrochemical properties and electronic structures are mainly dominated by the quinoidal structure, whereas molecular properties are scarcely affected by either type of chalcogen atom. The main effect of the chalcogen atoms is ascribed to the difference of crystallinity. Due to a strong intermolecular interaction of the selenophene, QBS exhibits a higher degree of crystallinity, which leads to an enhancement of both hole and electron mobilities. Consequently, these types of quinoidal molecules are found to be promising for use as ambipolar semiconductors.     

Influence of Pendant Group on Mobility of Organic Thin Film Transistor in Correlation with Reorganization Energy of Molecules

Charge transport properties of common donor copolymers in organic photovoltaics, poly({4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl}{3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl}) (PTB7) and poly([2,6′‐4,8‐di(5‐ethylhexylthienyl)benzo[1,2‐b;3,3‐b]dithiophene]{3‐fluoro‐2[(2‐ethylhexyl) carbonyl]thieno[3,4‐b]thiophenediyl}) (PTB7‐Th), with molecular structures differing only in the pendant group, are studied. This is the first report of field‐effect transistor mobility (µ_FET) of PTB7‐Th (0.14 cm² V^?1 s^?1) and the highest µ_FET for PTB7 (0.01 cm² V^?1 s^?1). µ_FET of PTB7‐Th is found to be almost one order of magnitude higher than PTB7. To understand the influence of molecular structure on charge transport, hole reorganization energy (λ_h) is calculated from first‐principles. λ_h of PTB7‐Th (≈150 meV) is found to be lower than PTB7 (≈346 meV). Further, the ratio of hopping rate versus square of charge transfer integral calculated from Marcus theory using λ_h for these systems is found to indicate a higher rate of hole transfer across dimers or homojunction interface for PTB7‐Th. These results are supplemented by experimentally determined λ using bulk‐heterojunction organic solar cells, where λ_PTB7‐Th≈200 meV and λ_PTB7≈310 meV follow a similar trend. The effective hole‐mobility estimation from BHJ devices correlates well with these λ values. This study provides understanding of charge transport properties via reorganization energy, as a function of pendant group without altering the backbone of the chains.