Efficient Nondoped Blue Fluorescent Organic Light‐Emitting Diodes (OLEDs) with a High External Quantum Efficiency of 9.4% @ 1000 cd m−2 Based on Phenanthroimidazole−Anthracene Derivative

Organic light‐emitting diodes (OLEDs) can promise flexible, light weight, energy conservation, and many other advantages for next‐generation display and lighting applications. However, achieving efficient blue electroluminescence still remains a challenge. Though both phosphorescent and thermally activated delayed fluorescence materials can realize high‐efficiency via effective triplet utilization, they need to be doped into appropriate host materials and often suffer from certain degree of efficiency roll‐off. Therefore, developing efficient blue‐emitting materials suitable for nondoped device with little efficiency roll‐off is of great significance in terms of practical applications. Herein, a phenanthroimidazole?anthracene blue‐emitting material is reported that can attain high efficiency at high luminescence in nondoped OLEDs. The maximum external quantum efficiency (EQE) of nondoped device is 9.44% which is acquired at the luminescence of 1000 cd m^?2. The EQE is still as high as 8.09% even the luminescence reaches 10 000 cd m^?2. The maximum luminescence is ≈57 000 cd m^?2. The electroluminescence (EL) spectrum shows an emission peak of 470 nm and the Commission International de L'Eclairage (CIE) coordinates is (0.14, 0.19) at the voltage of 7 V. To the best of the knowledge, this is among the best results of nondoped blue EL devices.     

Unexpected Sole Enol‐Form Emission of 2‐(2′‐Hydroxyphenyl)oxazoles for Highly Efficient Deep‐Blue‐Emitting Organic Electroluminescent Devices

Considerable efforts have been devoted to the development of highly efficient blue light‐emitting materials. However, deep‐blue fluorescence materials that can satisfy the Commission Internationale de l'Eclairage (CIE) coordinates of (0.14, 0.08) of the National Television System Committee (NTSC) standard blue and, moreover, possess a high external quantum efficiency (EQE) over 5%, remain scarce. Here, the unusual luminescence properties of triphenylamine‐bearing 2‐(2′‐hydroxyphenyl)oxazoles ( 3a–3c ) and their applications in organic light‐emitting diodes (OLEDs) are reported as highly efficient deep‐blue emitters. The 3a ‐based device exhibits a high spectral stability and an excellent color purity with a narrow full‐width at half‐maximum of 53 nm and the CIE coordinates of (0.15, 0.08), which is very close to the NTSC standard blue. The exciton utilization of the device closes to 100%, exceeding the theoretical limit of 25% in conventional fluorescent OLEDs. Experimental data and theoretical calculations demonstrate that 3a possesses a highly hybridized local and charge‐transfer excited state character. In OLEDs, 3a exhibits a maximum luminance of 9054 cd m^?2 and an EQE up to 7.1%, which is the first example of highly efficient blue OLEDs based on the sole enol‐form emission of 2‐(2′‐hydroxyphenyl)azoles.     

Deep‐Blue Phosphorescent Ir(III) Complexes with Light‐Harvesting Functional Moieties for Efficient Blue and White PhOLEDs in Solution‐Process

The photoluminescence (PL) efficiency of emitters is a key parameter to accomplish high electroluminescent performance in phosphorescent organic light‐emitting diodes (PhOLEDs). With the aim of enhancing the PL efficiency, this study designs deep‐blue emitting heteroleptic Ir(III) complexes (tBuCN‐FIrpic, tBuCN‐FIrpic‐OXD, and tBuCN‐FIrpic‐mCP) for solution‐processed PhOLEDs by covalently attaching the light‐harvesting functional moieties (mCP‐Me or OXD‐Me) to the control Ir(III) complex, tBuCN‐FIrpic. These Ir(III) complexes show similar deep‐blue emission peaks around 453, 480 nm (298 K) and 447, 477 nm (77 K) in chloroform. tBuCN‐FIrpic‐mCP demonstrates higher light‐harvesting efficiency (142%) than tBuCN‐FIrpic‐OXD (112%), relative to that of tBuCN‐FIrpic (100%), due to an efficient intramolecular energy transfer from the mCP group to the Ir(III) complex. Accordingly, the monochromatic PhOLEDs of tBuCN‐FIrpic‐mCP show higher external quantum efficiency (EQE) of 18.2% with one of the best blue coordinates (0.14, 0.18) in solution‐processing technology. Additionally, the two‐component (deep‐blue:yellow‐orange), single emitting layer, white PhOLED of tBuCN‐FIrpic‐mCP shows a maximum EQE of 20.6% and superior color quality (color rendering index (CRI) = 78, Commission Internationale de L'Eclairage (CIE) coordinates of (0.353, 0.352)) compared with the control device containing sky‐blue:yellow‐orange emitters (CRI = 60, CIE coordinates of (0.293, 0.395)) due to the good spectral coverage by the deep‐blue emitter.     

Bisanthracene‐Based Donor–Acceptor‐type Light‐Emitting Dopants: Highly Efficient Deep‐Blue Emission in Organic Light‐Emitting Devices

Deep‐blue fluorescent compounds are particularly important in organic light‐emitting devices (OLEDs). A donor–accepotor (DA)‐type blue‐emitting compound, 1‐(10‐(4‐methoxyphenyl)anthracen‐9‐yl)‐4‐(10‐(4‐cyanophenyl)anthracen‐9‐yl)benzene ( BD3 ), is synthesized, and for comparison, a nonDA‐type compound, 1,4‐bis(10‐phenylanthracene‐9‐yl)benzene ( BD1 ) and a weak DA‐type compound, 1‐(10‐phenylanthracen‐9‐yl)‐4‐(10‐(4‐cyanophenyl)anthracen‐9‐yl)‐benzene ( BD2 ), are also synthesized. The twisted conformations of the two anthracene units in the compounds, confirmed by single crystal X‐ray analysis, effectively prevent π‐conjugation, and the compound shows deep‐blue photoluminescence (PL) with a high PL quantum efficiency, almost independent of the solvent polarity, resulting from the absence of an intramolecular charge transfer state. The DA‐type molecule BD3 in a non‐doped device exhibits a maximum external quantum efficiency (EQE) of 4.2% with a slight roll‐off, indicating good charge balance due to the DA‐type molecular design. In the doped device with 4,4′‐bis(N‐carbazolyl)‐1,1′‐biphenyl (CBP) host, the BD3 exhibits higher EQE than 10% with Commission International de L'Eclairge (CIE) coordinates of (0.15, 0.06) and a narrow full‐width at half‐maximum of 45 nm, which is close to the CIE of the high definition television standard blue.     

An Indolocarbazole‐Based Thermally Activated Delayed Fluorescence Host for Solution‐Processed Phosphorescent Tandem Organic Light‐Emitting Devices Exhibiting Extremely Small Efficiency Roll‐Off

The study reports the development of a solution‐processed phosphorescent tandem organic light‐emitting device (OLED) exhibiting extremely small efficiency roll‐off. The OLED comprises two light‐emitting units (LEUs) connected by an interconnecting unit and employs a thermally activated delayed fluorescence host material. One of the most difficult tasks in the fabrication of OLEDs is to form a multilayer structure without dissolving the underlayer during the coating of the upper layer. The developed host materials exhibit high tolerance to methanol. The upper‐layer adjacent to the light‐emitting layer consists of ZnO nanoparticles, which could be dispersed in methanol by improving the preparation method. This results in the successful fabrication of a solution‐processed phosphorescent tandem OLED comprising two LEUs. The maximum external quantum efficiency (EQE) of the tandem device is 22.8%, and the EQE is 21.9% even at a high luminance of 10 000 cd m^?2. The suppression of efficiency roll‐off is among the best of those previously reported. Moreover, the operational stability of the tandem device is much higher compared with single‐LEU devices.     

High‐Efficiency and Color Stable Blue‐Light‐Emitting Polymers and Devices

Novel fluorene‐based blue‐light‐emitting copolymers with an ultraviolet‐blue‐light (UV‐blue‐light) emitting host and a blue‐light emitting component, 4‐N,N‐diphenylaminostilbene (DPS) have been designed and synthesized by using the palladium‐ catalyzed Suzuki coupling reaction. It was found that both copolymers poly [2,7‐(9,9‐dioctylfluorene)‐alt‐1,3‐(5‐carbazolphenylene)] (PFCz) DPS1 and PFCz‐DPS1‐OXD show pure blue‐light emission even with only 1 % DPS units because of the efficient energy transfer from the UV‐blue‐light emitting PFCz segments to the blue‐light‐emitting DPS units. Moreover, because of the efficient energy transfer/charge trapping in these copolymers, PFCz‐DPS1 and PFCz‐DPS1‐OXD show excellent device performance with a very stable pure blue‐light emission. By using a neutral surfactant poly[9,9‐bis(6'‐(diethanolamino)hexyl)‐fluorene] (PFN‐OH) as the electron injection layer, the device based on PFCz‐DPS1‐OXD5 with the configuration of ITO/PEDOT:PSS/PVK/polymer/PFN‐OH/Al showed a maximum quantum efficiency of 2.83 % and a maximum luminous efficiency of 2.50 cd A^–1. Its CIE 1931 chromaticity coordinates of (0.156, 0.080) match very well with the NTSC standard blue pixel coordinates of (0.14, 0.08). These results indicate that this kind of dopant/host copolymer could be a promising candidate for blue‐light‐emitting polymers with high efficiency, good color purity, and excellent color stability.     

Solution‐Processible Red Iridium Dendrimers based on Oligocarbazole Host Dendrons: Synthesis,Properties, and their Applications in Organic Light‐Emitting Diodes

A series of novel red‐emitting iridium dendrimers functionalized with oligocarbazole host dendrons up to the third generation ( red‐G3 ) have been synthesized by a convergent method, and their photophysical, electrochemical, and electroluminescent properties have been investigated. In addition to controlling the intermolecular interactions, oligocarbazole‐based dendrons could also participate in the electrochemical and charge‐transporting process. As a result, highly efficient electrophosphorescent devices can be fabricated by spin‐coating from chlorobenzene solution in different device configurations. The maximum external quantum efficiency (EQE) based on the non‐doped device configuration increases monotonically with increasing dendron generation. An EQE as high as 6.3% was obtained as for the third generation dendrimer red‐G3 , which is about 30 times higher than that of the prototype red‐G0 . Further optimization of the device configuration gave an EQE of 11.8% (13.0 cd A^?1, 7.2 lm W^?1) at 100 cd m^?2 with CIE coordinates of (0.65, 0.35). The state‐of‐the‐art performance indicated the potential of these oligocarbazole‐based red iridium dendrimers as solution processible emissive materials for organic light‐emitting diode applications.     

Thermally Activated Delayed Fluorescence Material as Host with Novel Spiro‐Based Skeleton for High Power Efficiency and Low Roll‐Off Blue and White Phosphorescent Devices

Efficiency roll‐off in blue organic light‐emitting diodes especially at high brightness still remains a vital issue for which the excitons density‐dependent mechanism of host materials takes most responsibility. Additionally, the efficiency roll‐off leads to high power consumption and reduces the operating lifetime because higher driving voltage and current are required. Here, by subtly modifying the triphenylamine to oxygen‐bridged quasi‐planar structure, a novel thermally activated delayed fluorescence type blue host Tri‐o‐2PO is successfully developed. Efficiency roll‐off based on Tri‐o‐2PO is ultralow with external quantum efficiency (EQE) just dropping by around 2% in the high luminance range from 1000 cd m^?2 to 10 000 cd m^?2. As expected, low turn‐on voltage (≈2.9 V) of device is also achieved, which is close to the theory limit value (≈2.62 V). Super‐high power efficiency (≈60 lm W^?1) and EQE (>22%) are also achieved when utilizing Tri‐o‐2PO as host. Furthermore, two‐color warm‐white light with CIE of (0.45, 0.43) and correlated color temperature of 2921 K is also fabricated and a champion EQE of 21% is delivered. These excellent performances prove the strategy of bridging the triphenylamine to reduce ΔE_st is validated and suggest the great potential of this novel skeleton.     

Mechanistic Study on High Efficiency Deep Blue AIE‐Based Organic Light‐Emitting Diodes by Magneto‐Electroluminescence

Aggregation‐induced emission (AIE) materials are highly attractive because of their excellent properties of high efficiency emission in nondoped organic light‐emitting diodes (OLEDs). Therefore, a deep understanding of the working mechanisms, further improving the electroluminescence (EL) efficiency of the resulting AIE‐based OLEDs, is necessary. Herein, the conversion process from higher energy triplet state (T₂) to the lowest singlet state (SS₁) is found in OLEDs based on a blue AIE material, 4′‐(4‐(diphenylamino)phenyl)‐5′‐phenyl‐[1,1′:2′,1′′‐terphenyl]‐4‐carbonitrile (TPB‐AC), obviously relating to the device efficiency, by magneto‐EL (MEL) measurements. A special line shape with rise at low field and reduction at high field is observed. The phenomenon is further clarified by theoretical calculations, temperature‐dependent MELs, and transient photoluminescence emission properties. On the basis of the T₂‐S₁ conversion process, the EL performances of the blue OLEDs based on TPB‐AC are further enhanced by introducing a phosphorescence doping emitter in the emitting layer, which effectively regulates the excitons on TPB‐AC molecules. The maximum external quantum efficiency (EQE) reaches 7.93% and the EQE keeps 7.57% at the luminance of 1000 cd m^?2. This work establishes a physical insight for designing high‐performance AIE materials and devices in the future.     

Study of Configuration Differentia and Highly Efficient,Deep‐Blue,Organic Light‐Emitting Diodes Based on Novel Naphtho[1,2‐d]imidazole Derivatives

Two novel naphtho[1,2‐d]imidazole derivatives are developed as deep‐blue, light‐emitting materials for organic light‐emitting diodes (OLEDs). The 1H‐naphtho[1,2‐d]imidazole based compounds exhibit a significantly superior performance than the 3H‐naphtho[1,2‐d]imidazole analogues in the single‐layer devices. This is because they have a much higher capacity for direct electron‐injection from the cathode compared to their isomeric counterparts resulting in a ground‐breaking EQE (external quantum efficiency) of 4.37% and a low turn‐on voltage of 2.7 V, and this is hitherto the best performance for a non‐doped single‐layer fluorescent OLED. Multi‐layer devices consisting of both hole‐ and electron‐transporting layers, result in identically excellent performances with EQE values of 4.12–6.08% and deep‐blue light emission (Commission Internationale de l'Eclairage (CIE) y values of 0.077–0.115) is obtained for both isomers due to the improved carrier injection and confinement within the emissive layer. In addition, they showed a significantly better blue‐color purity than analogous molecules based on benzimidazole or phenanthro[9,10‐d]imidazole segments.     

Interfacial Nucleation Seeding for Electroluminescent Manipulation in Blue Perovskite Light-Emitting Diodes

Efficient and stable blue emission of perovskite light-emitting diodes (PeLEDs) is a requisite toward their potential applications in full-color displays and solid-state lighting. Rational manipulation over the entire electroluminescence process is promising to break the efficiency limit of blue PeLEDs. Herein, a facile device architecture is proposed to achieve efficient blue PeLEDs for simultaneously reducing the energetic loss during electron-photon conversion and boosting the light outcoupling. Effective interfacial engineering is employed to manipulate the perovskite crystallization nucleation, enabling highly compact perovskite nanocrystal assemblies and suppressing the trap-induced carrier losses by means of interfacial hydrogen bonding interactions. This strategy contributes to a high external quantum efficiency (EQE) of 12.8% for blue PeLEDs emitting at 486 nm as well as improved operational stability. Moreover, blue PeLEDs reach a peak EQE of 16.8% with the incorporation of internal outcoupling structures for waveguided light, which can be further raised to 27.5% by integrating a lens-based structure for substrate-mode light. These results verify the validity of this strategy in producing efficient and stable blue PeLEDs for practical applications.     

Achieving above 30% external quantum efficiency for inverted phosphorescence organic light-emitting diodes based on ultrathin emitting layer

High efficiency inverted phosphorescence organic light-emitting diodes (PhOLEDs) based on ultrathin undoped and doped emitting layer (EML) have been developed. Compared to conventional device, the inverted PhOLED with 0.5 nm undoped EML exhibits significantly larger external quantum efficiency (EQE), due to effective energy transfer from the excited host to the emitter. According to the atomic force microscopy image of EML, the 0.5 nm emitter sandwiched by two hosts can be considered as the emitter doped in two hosts. The inverted device with intentionally doped ultrathin EML (1.5 nm) exhibits the maximum EQE of 31.1%, which is attributed to optimized charge balance and preferred horizontal orientation of emitter. However, such inverted device has large efficiency roll-off at high brightness because of triplet–triplet annihilation process within the ultrathin EML. This can be improved by broadening the doped EML. The inverted device with 10.5 nm doped EML has about EQE of 20 % at 10,000 cd/m². It is expected that our inverted PhOLED will promote development of high efficiency active-matrix organic light-emitting diodes based on the n-type Indium Gallium Zinc Oxide thin film transistor.     

Highly Efficient Green‐Emitting Phosphorescent Iridium Dendrimers Based on Carbazole Dendrons

Green‐emitting iridium dendrimers with rigid hole‐transporting carbazole dendrons are designed, synthesized, and investigated. With second‐generation dendrons, the photoluminescence quantum yield of the dendrimers is up to 87 % in solution and 45 % in a film. High‐quality films of the dendrimers are fabricated by spin‐coating, producing highly efficient, non‐doped electrophosphorescent organic light‐emitting diodes (OLEDs). With a device structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid)/neat dendrimer/1,3,5‐tris(2‐N‐phenylbenzimidazolyl)benzene/LiF/Al, a maximum external quantum efficiency (EQE) of 10.3 % and a maximum luminous efficiency of 34.7 cd A^–1 are realized. By doping the dendrimers into a carbazole‐based host, the maximum EQE can be further increased to 16.6 %. The integration of rigid hole‐transporting dendrons and phosphorescent complexes provides a new route to design highly efficient solution‐processable dendrimers for OLED applications.     

Over 10% EQE Near‐Infrared Electroluminescence Based on a Thermally Activated Delayed Fluorescence Emitter

Significant effort has been made to develop novel material systems to improve the efficiency of near‐infrared organic light‐emitting diodes (NIR OLEDs). Of those, fluorescent chromophores are mostly studied because of their advantages in cost and tunability. However, it is still rare for fluorescent NIR emitters to present good color purities in the NIR range and to have high external quantum efficiency (EQE). Here, a wedge‐shaped D‐π‐A‐π‐D emitter APDC‐DTPA with thermally activated delayed fluorescence property and a small single‐triplet splitting (ΔE_st) of 0.14 eV is presented. The non‐doped NIR device exhibits excellent performance with a maximum EQE of 2.19% and a peak wavelength of 777 nm. Remarkably, when 10 wt% of APDC‐DTPA is doped in 1,3,5‐tris(1‐phenyl‐1H‐benzimidazol‐2‐yl)benzene host, an extremely high EQE of 10.19% with an emission peak of 693 nm is achieved. All these values represent the best result for NIR OLEDs based on a pure organic fluorescent emitter with similar device structure and color gamut.     

Design Strategy of Blue and Yellow Thermally Activated Delayed Fluorescence Emitters and Their All‐Fluorescence White OLEDs with External Quantum Efficiency beyond 20%

Two thioxanthone‐derived isomeric series of thermally activated delayed fluorescence (TADF) emitters 1,6‐2TPA‐TX/3,6‐2TPA‐TX and 1,6‐2TPA‐TXO/3,6‐2TPA‐TXO are developed for organic light‐emitting diodes (OLEDs). Blue emission devices based on symmetrical 3,6‐2TPA‐TX with common vertical transition route realize an extremely high external quantum efficiency (EQE) of 23.7%, and an ever highest EQE of 24.3% is achieved for yellow emission devices based on 3,6‐2TPA‐TXO by solely changing the sulfur atom valence state of the thioxanthone core. In contrast, their corresponding asymmetric isomers are affected by intramolecular energy transfer and more severely by a nonradiative deactivation pathway, to give much low EQE values (<5%). By utilizing 3,6‐2TPA‐TX as a blue emitter and 3,6‐2TPA‐TXO as a yellow emitter, an ever highest EQE of 20.4% is achieved for all‐fluorescence white OLEDs.     

Multifunctional Deep‐Blue Emitter Comprising an Anthracene Core and Terminal Triphenylphosphine Oxide Groups

A highly efficient blue‐light emitter, 2‐tert‐butyl‐9,10‐bis[4′‐(diphenyl‐phosphoryl)phenyl]anthracene (POAn) is synthesized, and comprises electron‐deficient triphenylphosphine oxide side groups appended to the 9‐ and 10‐positions of a 2‐tert‐butylanthracene core. This sophisticated anthracene compound possesses a non‐coplanar configuration that results in a decreased tendency to crystallize and weaker intermolecular interactions in the solid state, leading to its pronounced morphological stability and high quantum efficiency. In addition to serving as an electron‐transporting blue‐light‐emitting material, POAn also facilitates electron injection from the Al cathode to itself. Consequently, simple double‐layer devices incorporating POAn as the emitting, electron‐transporting, and ‐injecting material produce bright deep‐blue lights having Commission Internationale de L'Eclairage coordinates of (0.15,0.07). The peak electroluminescence performance was 4.3% (2.9 cd A^?1). For a device lacking an electron‐transport layer or alkali fluoride, this device displays the best performance of any such the deep‐blue organic light‐emitting diodes reported to date.     

2D Ruddlesden–Popper Perovskite Nanoplate Based Deep‐Blue Light‐Emitting Diodes for Light Communication

Ruddlesden–Popper perovskite, (PEA)₂PbBr₄ (PEA = C₈H₉NH₃), is a steady and inexpensive material with a broad bandgap and a narrow‐band emission. These features make it a potential candidate for deep‐blue light‐emitting diodes (LEDs). However, due to the weak exciton binding energy, LEDs based on the perovskite thin films usually possess a very low external quantum efficiency (EQE) of <0.03%. Here, for the first time, the construction of high‐performance deep‐blue LEDs based on 2D (PEA)₂PbBr₄ nanoplates (NPs) is demonstrated. The as‐fabricated (PEA)₂PbBr₄ NPs film shows a deep‐blue emission at 410 nm with excellent stability under ambient conditions. Impressively, LEDs based on the (PEA)₂PbBr₄ NPs film deliver a bright deep‐blue emission with a maximum luminance of 147.6 cd m^?2 and a high EQE up to 0.31%, which represents the most efficient and brightest perovskite LEDs operating at deep‐blue wavelengths. Furthermore, the LEDs retain over 80% of their efficiencies for over 1350 min under ≈60% relative humidity. The steady and bright deep‐blue LEDs can be used as an excitation light source to realize white light emission, which shows the potential for light communication. The work provides scope for developing perovskite into efficient and deep‐blue LEDs for low‐cost light source and light communication.     

Charge‐Carrier Balance and Color Purity in Polyfluorene Polymer Blends for Blue Light‐Emitting Diodes

A study of an efficient blue light‐emitting diode based on a fluorescent aryl polyfluorene (aryl‐F8) homopolymer in an inverted device architecture is presented, with ZnO and MoO₃ as electron‐ and hole‐injecting electrodes, respectively. Charge‐carrier balance and color purity in these structures are achieved by incorporating poly(9,9‐dioctylfluorene‐co‐N‐(4‐butylphenyl)‐diphenylamine (TFB) into aryl‐F8. TFB is known to be a hole‐transporting material but it is found to act as a hole trap on mixing with aryl‐F8. Luminance efficiency of ≈6 cd A^?1 and external quantum efficiency (EQE) of 3.1% are obtained by adding a small amount (0.5% by weight) of TFB into aryl‐F8. Study of charge injection and transport in the single‐carrier devices shows that the addition of a small fraction of hole traps is necessary for charge‐carrier balance. Optical studies using UV–vis and fluorescence spectroscopic measurements, photoluminescence quantum yield, and fluorescence decay time measurements indicate that TFB does not affect the optical properties of the aryl‐F8, which is the emitting material in these devices. Luminance efficiency of up to ≈11 cd A^?1 and EQE values of 5.7% are achieved in these structures with the aid of improved out‐coupling using index‐matched hemispheres.     

Efficient Blue Phosphorescent OLEDs with Improved Stability and Color Purity through Judicious Triplet Exciton Management

Highly efficient and stable blue phosphorescent organic light‐emitting diodes are achieved by employing a step‐wise graded doping of platinum(II) 9‐(pyridin‐2‐yl)‐2‐(9‐(pyridin‐2‐yl)‐9H‐carbazol‐2‐yloxy)‐9H‐carbazole (PtNON) in a device setting. A device employing PtNON demonstrates a high peak external quantum efficiency (EQE) of 17.4% with an estimated LT₇₀ lifetime of over 1330 h at a brightness of 1000 cd m^?2. PtNON is then investigated as a “triplet sensitizer” in an alternating donor–acceptor doped emissive layer to further improve the device emission color purity by carefully managing an efficient Förster resonant energy transfer from PtNON to 2,5,8,11‐tetra‐tert‐butylperylene as a selected acceptor material. Thus, such OLED devices demonstrate an EQE of 16.9% with color coordinates of (0.16, 0.25) and an estimated luminance (LT₇₀) lifetime of 628 h at a high brightness of 1000 cd m^?2.     

Naphthothiadiazole‐Based Near‐Infrared Emitter with a Photoluminescence Quantum Yield of 60% in Neat Film and External Quantum Efficiencies of up to 3.9% in Nondoped OLEDs

Fluorescent emitters have regained intensive attention in organic light emitting diode (OLED) community owing to the breakthrough of the device efficiency and/or new emitting mechanism. This provides a good chance to develop new near‐infrared (NIR) fluorescent emitter and high‐efficiency device. In this work, a D‐π‐A‐π‐D type compound with naphthothiadiazole as acceptor, namely, 4,4′‐(naphtho[2,3‐c][1,2,5]thiadiazole‐4,9‐diyl)bis(N,N ‐diphenylaniline) (NZ2TPA), is designed and synthesized. The photophysical study and density functional theory analysis reveal that the emission of the compound has obvious hybridized local and charge‐transfer (HLCT) state feature. In addition, the compound shows aggregation‐induced emission (AIE) characteristic. Attributed to its HLCT mechanism and AIE characteristic, NZ2TPA acquires an unprecedentedly high photoluminescent quantum yield of 60% in the neat film, which is the highest among the reported organic small‐molecule NIR emitters and even exceeds most phosphorescent NIR materials. The nondoped devices based on NZ2TPA exhibit excellent performance, achieving a maximum external quantum efficiency (EQE) of 3.9% with the emission peak at 696 nm and a high luminance of 6330 cd m^?2, which are among the highest in the reported nondoped NIR fluorescent OLEDs. Moreover, the device remains a high EQE of 2.8% at high brightness of 1000 cd m^?2, with very low efficiency roll‐off.