Materials and Structures for Stretchable Energy Storage and Conversion Devices

Stretchable energy storage and conversion devices (ESCDs) are attracting intensive attention due to their promising and potential applications in realistic consumer products, ranging from portable electronics, bio‐integrated devices, space satellites, and electric vehicles to buildings with arbitrarily shaped surfaces. Material synthesis and structural design are core in the development of highly stretchable supercapacitors, batteries, and solar cells for practical applications. This review provides a brief summary of research development on the stretchable ESCDs in the past decade, from structural design strategies to novel materials synthesis. The focuses are on the fundamental insights of mechanical characteristics of materials and structures on the performance of the stretchable ESCDs, as well as challenges for their practical applications. Finally, some of the important directions in the areas of material synthesis and structural design facing the stretchable ESCDs are discussed.     

Stretchable semiconductor technologies with high areal coverages and strain-limiting behavior: demonstration in high-efficiency dual-junction GaInP/GaAs photovoltaics

Notched islands on a thin elastomeric substrate serve as a platform for dual-junction GaInP/GaAs solar cells with microscale dimensions and ultrathin forms for stretchable photovoltaic modules. These designs allow for a high degree of stretchability and areal coverage, and they provide a natural form of strain-limiting behavior, helping to avoid destructive effects of extreme deformations.     

Ultraflexible and Lightweight Bamboo‐Derived Transparent Electrodes for Perovskite Solar Cells

Wearable devices are mainly based on plastic substrates, such as polyethylene terephthalate and polyethylene naphthalate, which causes environmental pollution after use due to the long decomposition periods. This work reports on the fabrication of a biodegradable and biocompatible transparent conductive electrode derived from bamboo for flexible perovskite solar cells. The conductive bioelectrode exhibits extremely flexible and light‐weight properties. After bending 3000 times at a 4 mm curvature radius or even undergoing a crumpling test, it still shows excellent electrical performance and negligible decay. The performance of the bamboo‐based bioelectrode perovskite solar cell exhibits a record power conversion efficiency (PCE) of 11.68%, showing the highest efficiency among all reported biomass‐based perovskite solar cells. It is remarkable that this flexible device has a highly bendable mechanical stability, maintaining over 70% of its original PCE during 1000 bending cycles at a 4 mm curvature radius. This work paves the way for perovskite solar cells toward comfortable and environmentally friendly wearable devices.     

Integrated Perovskite/Bulk-Heterojunction Organic Solar Cells

The recently emerged integrated perovskite/bulk-heterojunction (BHJ) organic solar cells (IPOSCs) without any recombination layers have generated wide attention. This type of device structure can take the advantages of tandem cells using both perovskite solar and near-infrared (NIR) BHJ organic solar materials for wide-range sunlight absorption and the simple fabrication of single junction cells, as the low bandgap BHJ layer can provide additional light harvesting in the NIR region and the high open-circuit voltage can be maintained at the same time. This progress report highlights the recent developments in such IPOSCs and the possible challenges ahead. In addition, the recent development of perovskite solar cells and NIR organic solar cells is also covered to fully underline the importance and potential of IPOSCs.     

Recent Progress on Stretchable Electronic Devices with Intrinsically Stretchable Components

Stretchable electronic devices with intrinsically stretchable components have significant inherent advantages, including simple fabrication processes, a high integrity of the stacked layers, and low cost in comparison with stretchable electronic devices based on non‐stretchable components. The research in this field has focused on developing new intrinsically stretchable components for conductors, semiconductors, and insulators. New methodologies and fabrication processes have been developed to fabricate stretchable devices with intrinsically stretchable components. The latest successful examples of stretchable conductors for applications in interconnections, electrodes, and piezoresistive devices are reviewed here. Stretchable conductors can be used for electrode or sensor applications depending on the electrical properties of the stretchable conductors under mechanical strain. A detailed overview of the recent progress in stretchable semiconductors, stretchable insulators, and other novel stretchable materials is also given, along with a discussion of the associated technological innovations and challenges. Stretchable electronic devices with intrinsically stretchable components such as field‐effect transistors (FETs), photodetectors, light‐emitting diodes (LEDs), electronic skins, and energy harvesters are also described and a new strategy for development of stretchable electronic devices is discussed. Conclusions and future prospects for the development of stretchable electronic devices with intrinsically stretchable components are discussed.     

Stretchable Organic Semiconductor Devices

Stretchable electronics are essential for the development of intensely packed collapsible and portable electronics, wearable electronics, epidermal and bioimplanted electronics, 3D surface compliable devices, bionics, prosthesis, and robotics. However, most stretchable devices are currently based on inorganic electronics, whose high cost of fabrication and limited processing area make it difficult to produce inexpensive, large‐area devices. Therefore, organic stretchable electronics are highly attractive due to many advantages over their inorganic counterparts, such as their light weight, flexibility, low cost and large‐area solution‐processing, the reproducible semiconductor resources, and the easy tuning of their properties via molecular tailoring. Among them, stretchable organic semiconductor devices have become a hot and fast‐growing research field, in which great advances have been made in recent years. These fantastic advances are summarized here, focusing on stretchable organic field‐effect transistors, light‐emitting devices, solar cells, and memory devices.     

Historical Analysis of High-Efficiency,Large-Area Solar Cells: Toward Upscaling of Perovskite Solar Cells

The status and problems of upscaling research on perovskite solar cells, which must be addressed for commercialization efforts to be successful, are investigated. An 804 cm² perovskite solar module has been reported with 17.9% efficiency, which is significantly lower than the champion perovskite solar cell efficiency of 25.2% reported for a 0.09 cm² aperture area. For the realization of upscaling high-quality perovskite solar cells, the upscaling and development history of conventional silicon, copper indium gallium sulfur/selenide and CdTe solar cells, which are already commercialized with modules of sizes up to ≈25 000 cm², are reviewed. GaAs, organic, dye-sensitized solar cells and perovskite/silicon tandem solar cells are also reviewed. The similarities of the operating mechanisms between the various solar cells and the origin of different development pathway are investigated, and the ideal upscaling direction of perovskite solar cells is subsequently proposed. It is believed that lessons learned from the historical analysis of various solar cells provide a fundamental diagnosis of relative and absolute development status of perovskite solar cells. The unique perspective proposed here can pave the way toward the upscaling of perovskite solar cells.     

Advances in Solution‐Processed Multijunction Organic Solar Cells

The efficiency of organic solar cells can benefit from multijunction device architectures, in which energy losses are substantially reduced. Herein, recent developments in the field of solution‐processed multijunction organic solar cells are described. Recently, various strategies have been investigated and implemented to improve the performance of these devices. Next to developing new materials and processing methods for the photoactive and interconnecting layers, specific layers or stacks are designed to increase light absorption and improve the photocurrent by utilizing optical interference effects. These activities have resulted in power conversion efficiencies that approach those of modern thin film photovoltaic technologies. Multijunction cells require more elaborate and intricate characterization procedures to establish their efficiency correctly and a critical view on the results and new insights in this matter are discussed. Application of multijunction cells in photoelectrochemical water splitting and upscaling toward a commercial technology is briefly addressed.