Unperturbed dimensions of poly(phenyl acrylate)

Thirteen fractions of poly(phenyl acrylate) have been prepared with weight-average molecular weight ranging from 0.158 × 10⁶ to 2.57 × 10⁶ g mol^?1. The temperature coefficient of the unperturbed dimensions and the glass transition temperature were found to be ?1.8 × 10^?3 deg^?1 and 55.6°C respectively. Good accord was obtained among different methods for establishing θ-conditions of 11.5°C in ethyl lactate. From viscometry, osmometry and light scattering under θ-conditions, as well as in a good solvent, the unperturbed dimensions were determined via several procedures yielding a value of $\text{[〈r}{}^2\text{〉}{}_{\mathrm{0w}}\text{M}\text{?}{}_{\mathrm{w}}\text{]}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{= 6.0 (±0.2) × 10}{}^{\mathrm{?9}}\text{cm g}{}^{\mathrm{<mtext>?1</mtext><mtext>2</mtext>}}\text{mol}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$. This corresponds to a steric factor υ = 2.37 (±0.08) and a characteristic ratio C_∞ = 11.3 (±0.8). The polymer chain is thus more rigid than poly(methyl acrylate), but less rigid than poly(phenyl methacrylate). With respect to its T_g and flexibility, poly(phenyl acrylate) bears a strong similarity to poly(benzyl methacrylate).     

Thermomechanical heat of deformation studies on cis-polybutadiene

Thermomechanical heat of torsional deformation measurements have been made on crosslinked cis-polybutadiene by means of a Calvet microcalorimeter operated at 30°C. When corrected for volume changes utilizing the Gaussian statistical theory of elasticity, the data gave a value for the relative energy contribution to the torsional couple, $\text{M}{}_{\mathrm{e}}\text{M}$, of 0.14 ± 0.02. Measurements were also made on a sample subjected to simple tensile deformations. The relative energy contribution to the tensile force ($\text{f}{}_{\mathrm{e}}\text{f}$) was found to agree within experimental error with the value obtained for $\text{M}{}_{\mathrm{e}}\text{M}$, and the two results gave an average value for din $\text{〈r}{}^2{}_0\text{〉}\text{d}\text{T}$ of 4.1 × 10^?4 K^?1.     

The unperturbed molecular dimensions of poly(ethylene oxide) in aqueous solutions from intrinsic viscosity measurements and the evaluation of the theta temperature

Intrinsic viscosity measurements were carried out on five well characterized fractions of poly(ethylene oxide) in aqueous solutions at 24.9°, 34.9°, and 45.5°C. The Stockmayer-Fixman extrapolation was applied to the data: it yields the unperturbed dimensions K₀ of the chain. The unperturbed root-mean-square end-to-end distance $\text{〈}\text{R}\text{?}{}^2\text{〉}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}{}_0$ calculated for the polymer fractions in water indicate that the polymer molecules are expanded in this solvent as the temperature is raised. The temperature coefficient of unperturbed dimension, $\text{d In}\text{〈}\text{R}\text{?}{}^2\text{〉}{}_0\text{d}\text{t}\text{= 0.024}\text{K}{}^{\mathrm{?1}}$, calculated for poly(ethylene oxide) in water using the present data is about 100 times higher than the literature values of 0.23 (±0.02) × 10^?3 K^?1 and 0.2 (±0.2) × 10^?3 K^?1, respectively, obtained from force-temperature (‘thermoelastic’) measurements on elongated networks of the polymer in the amorphouse state and form viscosity measurements on this polymer in benzene. A value of θ=108.3°C was obtained from the temperature dependence of the interaction parameter B in the Stockmayer-Fixman equation.     

Properties of extremely high molecular weight polystyrene in solution

Extremely high molecular weight polystyrenes with a $\text{M}\text{?}{}_{\mathrm{w}}$ in the range 10.8 × 10⁶ to 2.2 × 10⁷ were prepared by emulsion polymerization initiated with a heterogeneous initiator at 30°C, which has a ‘living character’. Samples of polystyrene were characterized by light scattering and viscometry in toluene and benzene at 25°C, and in θ-solvent cyclohexane at 34.8°C. Also determined were the relationships of mean-square radius of gyration 〈s²〉 (m²) and the second virial coefficient A₂ (m³ mol kg^?2) on the molecular weight, which for toluene and benzene are described in equations: Toluene (25°C) $\text{〈s}{}^2\text{〉=1.59 × 10}{}^{\mathrm{?23}}\text{M}\text{?}{}_{\mathrm{w}}{}^{1.23}$; $\text{A}{}_2\text{=4.79 × 10}{}^{\mathrm{?3}}\text{M}\text{?}{}_{\mathrm{w}}{}^{\mathrm{?0.63}}$; Benzene (25°C) $\text{〈s}{}^2\text{〉=1.23 × 10}{}^{\mathrm{?22}}\text{M}\text{?}{}_{\mathrm{w}}{}^{1.20}$; $\text{A}{}_2\text{=2.59 × 10}{}^{\mathrm{?3}}\text{M}\text{?}{}_{\mathrm{w}}{}^{\mathrm{?0.59}}$. The parameters in the Mark-Houwink-Sakurada equation were established, for extremely high molecular weight polystyrene in toluene and in benzene, at 25°C into the form giving for $\text{[η] (}\text{m}{}^3\text{kg}{}^{\mathrm{?1}}\text{): [η] = 8.52 × 10}{}^{\mathrm{?5}}\text{M}\text{?}{}_{\mathrm{w}}{}^{0.61}$; $\text{[η] = 1.47 × 10}{}^{\mathrm{?4}}\text{M}\text{?}{}_{\mathrm{w}}{}^{0.56}$. The mentioned relations, as well as the obtained values of Flory parameter ?₀ and of ratio $\text{[η]}\text{M}\text{?}{}_{\mathrm{w}}{}^{0.5}$ were compared with solution properties of high molecular weight polystyrene with narrow molecular weight distribution prepared by anionic polymerization by Fukuda et al.     

Polymer translational diffusion: 2. Non-theta solutions,polystyrene in butan-2-one

The diffusion of linear polystyrene under non-theta conditions in butan-2-one has been studied by Rayleigh light scattered linewidth measurements for the molecular weight range of 2.08 × 10⁶ to 8.7 × 10⁶ and as a function of concentration. By extrapolation of diffusion coefficient values to zero concentration we find that $\text{D}{}_0\text{= 5.5 × 10}{}^{\mathrm{?4}}\text{M}\text{?}{}^{\mathrm{?0.561}}{}_{\mathrm{w}}\text{cm}{}^2\text{s}{}^{\mathrm{?1}}$. The first order concentration dependence $\text{k}{}_{\mathrm{<mtext>d</mtext>}}\text{c}$ changes sign as the molecular weight increases, $\text{k}{}_{\mathrm{<mtext>d</mtext>}}$ being fairly small and negative at low molecular weights and increasingly positive above $\text{M}\text{?}{}_{\mathrm{w}}\text{?230 000}$.     

Viscometric behaviour of polystyrene in tetralin/cyclohexane mixtures

For solutions of polystyrene (M=10⁵–10⁶ g mol^?1), intrinsic viscosities [η] have been measured at 34.5°C, which is the θ temperature for the polymer in cyclohexane. The solvents comprised cyclohexane in admixture with a thermodynamically good solvent, 1,2,3,4-tetrahydronaphthalene (tetralin, TET) over the whole range of solvent composition. From an assessment of several extrapolation procedures, a value of 85 × 10^?3$\text{(±1 × 10}{}^{\mathrm{?3}}\text{)}\text{cm}{}^3\text{g}{}^{\mathrm{<mtext>?3</mtext><mtext>2</mtext>}}\text{mol}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ was obtained for K_θ (in the relationship $\text{[η] = K}{}_{\mathrm{\theta }}\text{M}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{α}{}^3$, where α is the expansion factor), thus yielding $\text{0.681}\text{A}\text{?}\text{g}{}^{\mathrm{<mtext>?1</mtext><mtext>2</mtext>}}\text{mol}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$, 2.25 and 10.2 for the unperturbed dimensions, steric factor σ and characteristic ratio C_∞ respectively. The value of K_θ was independent of solvent composition despite the finite excess free energy of mixing for the solvent components alone, which has been asserted elsewhere to affect K_θ. The present results, in conjunction with previous ones relating to 98.4°C, indicate a value of ?0.89 × 10^?3 deg^?1 for the temperature coefficient of the unperturbed dimensions.     

A calculation of the elastic constant c33 of a graphite crystal as a function of temperature

A calculation is presented of the elastic constant C₃₃ of a graphite crystal as a function of temperature up to 2500 K, taking into account the anharmonic contribution and the changes in interlayer interactions due to the large lattice thermal expansion. Parametric variations in the theory show that the anharmonic contribution to C₃₃ depends principally on the parameter ($\text{?}{}^2\text{C}{}_{33}\text{?e}{}^2{}_{\mathrm{zz}}$) Comparison of theoretical results with the experimental data, which is mainly from neutron scattering experiments, shows that the data can be accounted for if ($\text{?}{}^2\text{C}{}_{33}\text{?e}{}^2{}_{\mathrm{zz}}$) lies in the range 7–10 × 10¹³ dynes/cm². A theoretical estimate of ($\text{?}{}^2\text{C}{}_{33}\text{?e}{}^2{}_{\mathrm{zz}}$) based on Lennard-Jones potentials between atoms in adjacent basal planes gives a value of 9·07 × 10¹³ dynes/cm².     

Poly(ortho-vinylbenzophenone)

This article reports the synthesis and free radical polymerization of ortho-vinylbenzophenone. The glass transition temperature T_g of the homopolymer is 136°C. The products synthesized appeared to be atactic and amorphous. The Mark-Houwink constants for poly (o-vinylbenzophenone) in tetrahydrofuran are K = 4.2 × 10^?2 cm³ g^?1 and a = 0.765. The pre-exponential constant under theta conditions, K_θ, is estimated to be 5.93 × 10^?2 cm³ g^?1. The ratio of unperturbed dimensions of the actual polymer and free rotating analogue chain is 3.93, which is almost double that of polystyrene. The Flory-Huggins interaction parameter for poly $\text{(o-}\text{vinylbenzophenone}\text{)}\text{tetrahydrofuran}$ is 0.48 at room temperature. The $\text{k}{}_{\mathrm{<mtext>p</mtext>}}\text{k}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}{}_{\mathrm{<mtext>t</mtext>}}$ ratio at 60°C is $\text{1.1 × 10}{}^{\mathrm{?2}}\text{l}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}\text{mol}{}^{\mathrm{<mtext>?1</mtext><mtext>2</mtext>}}\text{s}{}^{\mathrm{<mtext>?1</mtext><mtext>2</mtext>}}$. In free radical copolymerizations with styrene at 70°C, r₁ (o-vinylbenzophenone) = 1.216, r₂ = 0.751. This copolymerizations is virtually random.     

Small-angle neutron scattering studies of molten and crystalline polyethylene

Small-angle neutron scattering studies have been made of molten and crystalline polyethylene using samples containing small amounts of deuterated polyethylene (PED) in a protonated polyethylene (PEH) matrix. Careful studies were made of PED aggregation effects, and by a combination of solution blending techniques and rapid quenching from the melt, it was possible to prepare samples with a statistical distribution of PED molecules in the PEH matrix. Measurements of radius of gyration $\text{(S}{}^2\text{)}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}{}_{\mathrm{w}}$ at low κ [$\text{κ = (}\text{4π}\text{λ}$) sin $\text{? ≤ 2 × 10}{}^{\mathrm{?2}}\text{A}\text{?}{}^{\mathrm{?1}}$] in the melt and in the solid state gave very similar values which may be summarized as $\text{〈S}{}^2\text{〉}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}{}_{\mathrm{w}}\text{= (0.46 ± 0.05)M}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}{}_{\mathrm{w}}$ for both phases. This correspondence of values indicates that on a rapid quench, diffusion is sufficiently slow that the molecule crystallizes with a similar spatial distribution of mass elements to that possessed in the melt. Measurements of scattering data over a wide κ range ($\text{6 × 10}{}^{\mathrm{?3}}\text{≤ κ ≤ 0.12}\text{A}\text{?}{}^{\mathrm{?1}}$) have also been made from samples showing no aggregation effects. Calculations indicate that it is difficult to fit this data in terms of models which postulate adjacent chain re-entry in one crystallographic plane for this type of sample.     

Determination of type and width of a size distribution from the z-averages of the radii moments rnz

Relationships are given between the z-average radii moments $\text{r}\text{?}{}^{\mathrm{n}}{}_{\mathrm{z}}$ and the common moments $\text{r}\text{?}{}^{\mathrm{n}}$ of a size distribution. Instructions are given for finding the type and width of a size distribution from measurements of the $\text{r}\text{?}{}^{\mathrm{n}}{}_{\mathrm{z}}$ moments.     

Characterization of poly(1,4-phenyleneterephthalamide) in concentrated sulphuric acid: 1. Static and dynamic properties

Laser light scattering including angular dependence of total integrated scattered intensity and of the spectral distribution has been used to characterize five samples of poly(1,4-phenylene terephthalamide), PPTA (commercially known as Kevlar), of different molecular weights in 96% sulphuric acid and 0.1 NK₂SO₄. The data are supplemented by intrinsic viscosity measurements used to detect the possible effects of association, by differential refractometry providing a measure of the refractive index increments in mixed solvents (H₂O, H₂SO₄ and K₂SO₄) and by spectrophotometry for the extinction coefficient needed in the correction of attenuation in light scattering studies. The results show 〈D〉Z = 2.11 × 10^?5$\text{M}\text{?}{}_{\mathrm{<mtext>W</mtext>}}{}^{\mathrm{?0.75}}\text{cm}{}^{\mathrm{?2}}\text{s}{}^{\mathrm{?1}}$ in reasonable agreement with an average of many of the published intrinsic viscosity data obeying [η] = 1.09 × 10?3 M_w^1.25 ml g^?1 and _w expressed in g mol^?1.     

Poly(ethyl acrylate) in dilute solution

Poly(ethyl acrylate) (PEA), solution polymerized in methyl ethyl ketone by free radical initiation, was fractionated and the fractions were characterized by light scattering, viscometry and osmometry. Fractions obtained were in the molecular weight range of 0·3 × 10⁶ to 1·6 × 10⁶ with a polydispersity of 1.40. The following Mark-Houwink relations were established:

$\text{[η]}{}^{\mathrm{<mtext>35°</mtext><mtext>C</mtext>}}{}_{\mathrm{<mtext>acetone</mtext>}}\text{=4·15×10}{}^{\mathrm{?2}}\text{M}{}^{\mathrm{0?61}}{}_{\mathrm{W}}$

$\text{[η]}{}^{\mathrm{<mtext>35°</mtext><mtext>C</mtext>}}{}_{\mathrm{<mtext>MEK</mtext>}}\text{=2·03×10}{}^{\mathrm{?2}}\text{M}{}^{\mathrm{0?66}}{}_{\mathrm{W}}$

$\text{[η]}{}^{\mathrm{<mtext>39.5°</mtext><mtext>C</mtext>}}{}_{\mathrm{<mtext>n-propanal</mtext>}}\text{=7·89×10}{}^{\mathrm{?2}}\text{M}{}^{\mathrm{0?50}}{}_{\mathrm{W}}$

It was found that n-propanol at 39.5°C was a theta solvent for poly(ethyl acrylate) and that acetone was a poor solvent compared to methyl ethyl ketone. A relation between the molecular dimension and the molecular weight was established. It was observed that the chain dimensions of poly(ethyl acrylate) and poly(butyl acrylate) were considerably larger than poly(ethyl methacrylate) and poly(butyl methacrylate) respectively. The validity of various extrapolation procedures that have been proposed for calculating the unperturbed dimensions have been examined. The steric factor for PEA was 2·16 compared to 2·10 for poly(ethyl methacrylate). Root mean square end-to-end distances were calculated from the Debye-Bueche and Kirkwood-Riseman methods and compared with the experimental values.     

Comparison of the unperturbed dimension of polystyrene for endothermal and exothermal heats of dilution within the same system

Light scattering measurements for two samples of polystyrene (I, M_w = 2.15 × 10⁵; II, M_w = 2.5 × 10⁶) were performed in the iso-refractive mixed solvent dimethoxymethane-diethyl ether. For sample I the temperature dependence of the second osmotic virial coefficient A₂ was determined for three constant compositions of the mixed solvent. In the range ?30° to +25°C the three curves run practically parallel and exhibit a maximum at approximately ?10°C. For the volume fraction of 0.7 diethyl ether in the mixed solvent, an endothermal theta-temperature θ₊ was found at ?27.0° ± 1.5°C and θ_?, the exothermal theta-temperature, at ?5.0 ± 1°C. The investigation of sample II in the abovementioned solvent confirmed the observed θ_?-temperature and displayed a higher exothermicity compared with I. Similarly to the temperature variation of A₂, the chain dimensions of II, determined from the angular dependence of the scattered light, run through a maximum. The unperturbed dimensions in the mixed solvent are found to be: $\text{r}{}_{\mathrm{w}}\text{= 448 ± 5}\text{A}\text{?}$ at θ₊ = ?27°C and $\text{r}{}_{\mathrm{w}}\text{= 443 ± 5}\text{A}\text{?}$ at θ_? = ?5°C, as compared with $\text{r}{}_{\mathrm{w}}\text{= 420 ± 10}\text{A}\text{?}$ at θ₊ = +33°C in cyclohexene. The inter-relation of the chain expansion coefficient and A₂ is quantitatively described by the Zimm-Stockmayer-Fixman equation over the entire range of heats of dilution.     

Hydrogen mass transfer in liquid hydrocarbons at elevated temperatures and pressures

The mass transfer rate of hydrogen in tetralin and hydrogenated SRC II liquid was studied in a stirred vessel at 606–684 K and 7.0–13.5 MPa. Experiments were carried out using a newly developed in-situ hydrogen probe made of semi-permeable nickel membrane. The effects of stirrer speed, liquid height to vessel diameter ratio, temperature and pressure on mass transfer rate coefficients were investigated. The experimentally determined $\text{K}{}_{\mathrm{<mtext>l</mtext>}}\text{a}$ values were correlated in terms of power input per unit volume of liquid and liquid height to vessel diameter ratio as follows: $\text{k}{}_{\mathrm{<mtext>L</mtext>}}\text{a = 3.43 × 10}{}^{\mathrm{?4}}\text{(}\text{P}\text{V}\text{)}{}^{0.8}\text{(}\text{H}\text{D}{}_{\mathrm{<mtext>T</mtext>}}\text{)}{}^{\mathrm{?1.9}}$ Furthermore, the liquid-phase mass transfer coefficient, $\text{k}{}_{\mathrm{<mtext>l</mtext>}}$, was found to be of the order of 10^?5 m s^?1 for low agitator speeds.     

Self-diffusion of poly(ethylene oxide) in aqueous dextran solutions measured using FT-pulsed field gradient n.m.r.

Transport in ternary polymer₁, polymer₂, solvent systems has been investigated using an n.m.r. spin-echo technique. The dependence of the self-diffusion coefficient of poly(ethylene oxide) polymers on the concentration and molecular size of dextran in aqueous solution has been measured. Monodisperse poly(ethylene oxide) fractions ($\text{M}\text{?}{}_{\mathrm{w}}\text{=7.3×10}{}^4$, 2.8·10⁵ and 1.2·10⁶) and dextrans ($\text{M}\text{?}{}_{\mathrm{w}}\text{=2·10}{}^4$, 1·10⁵ and 5·10⁵) have been employed over a range of concentration up to the miscibility limit in each system. It is found that when the molecular size of the diffusant is commensurate with or exceeds that of the matrix polymer, a relationship of the form: $\text{(}\text{D}\text{D}{}_0\text{)}{}_{\mathrm{<mtext>PEO</mtext>}}\text{=}\text{exp}\text{?k(C[η])}$ is applicable, where C[η] refers to the dextran component and is considered to describe the extent of coil overlap in concentrated solution. ($\text{D}\text{D}{}_0$) is independent of the molecular size of the poly(ethylene oxide), at least in the range studied (M_w<300 000).     

Characterization of styrene-ethylene oxide and methyl methacrylate-styrene block copolymers by light scattering

Several polystyrene-poly(ethylene oxide)-polystyrene (PS-PEO-PS) and poly(methyl methacrylate)-polystyrene-poly(methyl methacrylate) (PMMA-PS-PMMA) block copolymers, synthesized by free-radical polymerization, were studied in various solvents by using a light-scattering technique. The copolymers, which have different lengths of central blocks, had molecular weights within the range 3.0 × 10⁴ to 1.6 × 10⁶. It was found that almost all of them were confirmed as block copolymers from the variation of the product $\text{M}{}_{\mathrm{<mtext>app</mtext>}}\text{〈S}{}^2{}_{\mathrm{<mtext>app</mtext>}}\text{〉}{}^{\mathrm{<mtext>1</mtext><mtext>2</mtext>}}$ with $\text{W}{}_{\mathrm{<mtext>A</mtext><mtext>v</mtext><mtext>A</mtext>}}\text{v}$, although they were rather heterogeneous. The copolymer compositions determined either from the additivity of the refractive index increments of its constituent parts and the copolymer or from ultra-violet analysis were in excellent agreement with each other.     

Poly(sulphopropylbetaines): 2. Dilute solution properties

Solution properties of a series of aromatic ($\text{5 × 10}{}^3\text{<}\text{M}\text{?}{}_{\mathrm{w}}\text{< 2.5 × 10}{}^5$) and aliphatic ($\text{10}{}^6\text{<}\text{M}\text{?}{}_{\mathrm{w}}\text{< 1.2 × 10}{}^7$) poly(sulphopropylbetaines) have been investigated by examining three complementary phenomena: (a) solubility in organic protic solvents; (b) water solubility promoted by various (cloud point titrations), with special emphasis on the influence of the anion polarizability and a comparison between Na⁺ and Ca⁺⁺; (c) hydrodynamic and morphological properties in aqueous NaCl solutions at 25°C, as derived from the Mark-Houwink-Sakurada relations. Chain expansion is a slightly increasing function of the NaCl concentration (≤1 M) but it remains, however, relatively low, even for high molecular weights (α_η < 1.15). With respect to the polymeric amino precursors, the zwitterionic group

enhances chain rigidity (steric factor σ), as a result of its steric hindrance and specific dipolar interactions between neighbouring units.     

Carbon formation from methane in combustion products

The rates of deposition of carbon on alumina surfaces and on soot particles, have been measured in a pilot scale tubular reactor in which cold methane was mixed with combustion products at 1920°K. A hard grey metallic film of carbon, quite free of soot, was deposited on alumina surfaces for initial methane concentrations between 12 and 24 per cent. An induction period of slow growth rate, before a film covered the surface completely, was followed by a constant growth rate. Measured growth rates were from 0·06 × 10^?6 to 1·43 × 10^?6 g/cm² sec of carbon on alumina at 1270°K to 1450°K, and from 0·1 × 10^?4 to 1·14 × 10^?4 g/cm² sec on soot particles at 1370°K to 1700°K. Methane decomposition rates were much higher than predicted by the unimolecular mechanism indicating a predominance of radical reactions. Carbon deposition rates were related to the mole fraction, χ, of hydrocarbons in the gas which bear more than three carbon atoms per molecule, by, $\text{m}\text{?}{}_{\mathrm{f}}\text{= 1·0 × 10}{}^2\text{n.χ}$. exp (?42,300/RT_f), g/cm²sec for carbon film, $\text{m}\text{?}{}_{\mathrm{s}}\text{= 4·6 × 10}{}^3\text{nχ}$ exp (? 46,100/RT_g), g/cm² sec for soot. A precoat of soot increased the growth rate of film carbon by 1·8 to 7·8 times yielding a hard adherent dull brown film     

Poly(sulphopropylbetaines): 1. Synthesis and characterization

The synthesis of aromatic and aliphatic poly(sulphopropylbetaines) is described within the series of vinylpyridines and tertiary amino-methacrylates. Two complementary strategies were used: (a) preparation and free radical polymerization in aqueous solution (60°C, 4,4'-azobiscyanovaleric acid) of the monomers; (b) heterogeneous quaternization of preformed poly(vinylpyridines) and poly(tertiary amino-methacrylates) by 1,3-propanesultone in propylene carbonate or tetramethylene sulphone solution (120°C). The high molecular weight poly (zwitterions) ($\text{10}{}^5\text{<}\text{M}\text{?}{}_{\mathrm{W}}\text{< 5 × 10}{}^6$) were characterized by ultra-violet and ¹H nuclear magnetic resonance spectroscopy, and their water affinity at 20°C was estimated by water vapour absorption measurements.