Advanced Asymmetric Supercapacitors Based on Ni(OH)2/Graphene and Porous Graphene Electrodes with High Energy Density

Hierarchical flowerlike nickel hydroxide decorated on graphene sheets has been prepared by a facile and cost‐effective microwave‐assisted method. In order to achieve high energy and power densities, a high‐voltage asymmetric supercapacitor is successfully fabricated using Ni(OH)₂/graphene and porous graphene as the positive and negative electrodes, respectively. Because of their unique structure, both of these materials exhibit excellent electrochemical performances. The optimized asymmetric supercapacitor could be cycled reversibly in the high‐voltage region of 0–1.6 V and displays intriguing performances with a maximum specific capacitance of 218.4 F g^?1 and high energy density of 77.8 Wh kg^?1. Furthermore, the Ni(OH)₂/graphene//porous graphene supercapacitor device exhibits an excellent long cycle life along with 94.3% specific capacitance retained after 3000 cycles. These fascinating performances can be attributed to the high capacitance and the positive synergistic effects of the two electrodes. The impressive results presented here may pave the way for promising applications in high energy density storage systems.     

Nitrogen‐Doped Carbon Networks for High Energy Density Supercapacitors Derived from Polyaniline Coated Bacterial Cellulose

Bacterial cellulose (BC) is used as both template and precursor for the synthesis of nitrogen‐doped carbon networks through the carbonization of polyaniline (PANI) coated BC. The as‐obtained carbon networks can act not only as support for obtaining high capacitance electrode materials such as activated carbon (AC) and carbon/MnO₂ hybrid material, but also as conductive networks to integrate active electrode materials. As a result, the as‐assembled AC//carbon‐MnO₂ asymmetric supercapacitor exhibits a considerably high energy density of 63 Wh kg^?1 in 1.0 m Na₂SO₄ aqueous solution, higher than most reported AC//MnO₂ asymmetric supercapacitors. More importantly, this asymmetric supercapacitor also exhibits an excellent cycling performance with 92% specific capacitance retention after 5000 cycles. Those results offer a low‐cost, eco‐friendly design of electrode materials for high‐performance supercapacitors.     

Dual Support System Ensuring Porous Co–Al Hydroxide Nanosheets with Ultrahigh Rate Performance and High Energy Density for Supercapacitors

Layered double hydroxides (LDHs) are promising supercapacitor electrode materials due to their high specific capacitances. However, their electrochemical performances such as rate performance and energy density at a high current density, are rather poor. Accordingly, a facile strategy is demonstrated for the synthesis of the integrated porous Co–Al hydroxide nanosheets (named as GSP‐LDH) with dual support system using dodecyl sulfate anions and graphene sheets as structural and conductive supports, respectively. Owing to fast ion/electron transport, porous and integrated structure, the GSP‐LDH electrode exhibits remarkably improved electrochemical characteristics such as high specific capacitance (1043 F g^?1 at 1 A g^?1) and ultra‐high rate performance capability (912 F g^?1 at 20 A g^?1). Moreover, the assembled sandwiched graphene/porous carbon (SGC)//GSP‐LDH asymmetric supercapacitor delivers a high energy density up to 20.4 Wh kg^?1 at a very high power density of 9.3 kW kg^?1, higher than those of previously reported asymmetric supercapacitors. The strategy provides a facile and effective method to achieve high rate performance LDH based electrode materials for supercapacitors.     

Asymmetric Supercapacitors Based on Graphene/MnO2 Nanospheres and Graphene/MoO3 Nanosheets with High Energy Density

Asymmetric supercapacitors with high energy density are fabricated using a self‐assembled reduced graphene oxide (RGO)/MnO₂ (GrMnO₂) composite as a positive electrode and a RGO/MoO₃ (GrMoO₃) composite as a negative electrode in safe aqueous Na₂SO₄ electrolyte. The operation voltage is maximized by choosing two metal oxides with the largest work function difference. Because of the synergistic effects of highly conductive graphene and highly pseudocapacitive metal oxides, the hybrid nanostructure electrodes exhibit better charge transport and cycling stability. The operation voltage is expanded to 2.0 V in spite of the use of aqueous electrolyte, revealing a high energy density of 42.6 Wh kg^?1 at a power density of 276 W kg^?1 and a maximum specific capacitance of 307 F g^?1, consequently giving rise to an excellent Ragone plot. In addition, the GrMnO₂//GrMoO₃ supercapacitor exhibits improved capacitance with cycling up to 1000 cycles, which is explained by the development of micropore structures during the repetition of ion transfer. This strategy for the choice of metal oxides provides a promising route for next‐generation supercapacitors with high energy and high power densities.     

Molecular Design of Mesoporous NiCo2O4 and NiCo2S4 with Sub‐Micrometer‐Polyhedron Architectures for Efficient Pseudocapacitive Energy Storage

Spinel‐type NiCo₂O₄ (NCO) and NiCo₂S₄ (NCS) polyhedron architectures with sizes of 500–600 nm and rich mesopores with diameters of 1–2 nm are prepared facilely by the molecular design of Ni and Co into polyhedron‐shaped zeolitic imidazolate frameworks as solid precursors. Both as‐prepared NCO and NCS nanostructures exhibit excellent pseudocapacitance and stability as electrodes in supercapacitors. In particular, the exchange of O^2? in the lattice of NCO with S^2? obviously improves the electrochemical performance. NCS shows a highly attractive capacitance of 1296 F g^?1 at a current density of 1 A g^?1, ultrahigh rate capability with 93.2% capacitance retention at 10 A g^?1, and excellent cycling stability with a capacitance retention of 94.5% after cycling at 1 A g^?1 for 6000 times. The asymmetric supercapacitor with an NCS negative electrode and an active carbon positive electrode delivers a very attractive energy density of 44.8 Wh kg^?1 at power density 794.5 W kg^?1, and a favorable energy density of 37.7 Wh kg^?1 is still achieved at a high power density of 7981.1 W kg^?1. The specific mesoporous polyhedron architecture contributes significantly to the outstanding electrochemical performances of both NCO and NCS for capacitive energy storage.     

Nickel–Cobalt Layered Double Hydroxide Nanosheets for High‐performance Supercapacitor Electrode Materials

A facile and novel one‐step method of growing nickel‐cobalt layered double hydroxide (Ni‐Co LDH) hybrid films with ultrathin nanosheets and porous nanostructures on nickel foam is presented using cetyltrimethylammonium bromide as nanostructure growth assisting agent but without any adscititious alkali sources and oxidants. As pseudocapacitors, the as‐obtained Ni‐Co LDH hybrid film‐based electrodes display a significantly enhanced specific capacitance (2682 F g^?1 at 3 A g^?1, based on active materials) and energy density (77.3 Wh kg^?1 at 623 W kg^?1), compared to most previously reported electrodes based on nickel‐cobalt oxides/hydroxides. Moreover, the asymmetric supercapacitor, with the Ni‐Co LDH hybrid film as the positive electrode material and porous freeze‐dried reduced graphene oxide (RGO) as the negative electrode material, exhibits an ultrahigh energy density (188 Wh kg^?1) at an average power density of 1499 W kg^?1 based on the mass of active material, which greatly exceeds the energy densities of most previously reported nickel or cobalt oxide/hydroxide‐based asymmetric supercapacitors.     

All‐Solid‐State Asymmetric Supercapacitors with Metal Selenides Electrodes and Ionic Conductive Composites Electrolytes

All‐solid‐state flexible asymmetric supercapacitors (ASCs) are developed by utilization of graphene nanoribbon (GNR)/Co_0.85Se composites as the positive electrode, GNR/Bi₂Se₃ composites as the negative electrode, and polymer‐grafted‐graphene oxide membranes as solid‐state electrolytes. Both GNR/Co_0.85Se and GNR/Bi₂Se₃ composite electrodes are developed by a facile one‐step hydrothermal growth method from graphene oxide nanoribbons as the nucleation framework. The GNR/Co_0.85Se composite electrode exhibits a specific capacity of 76.4 mAh g^?1 at a current density of 1 A g^?1 and the GNR/Bi₂Se₃ composite electrode exhibits a specific capacity of 100.2 mAh g^?1 at a current density of 0.5 A g^?1. Moreover, the stretchable membrane solid‐state electrolytes exhibit superior ionic conductivity of 108.7 mS cm^?1. As a result, the flexible ASCs demonstrate an operating voltage of 1.6 V, an energy density of 30.9 Wh kg^?1 at the power density of 559 W kg^?1, and excellent cycling stability with 89% capacitance retention after 5000 cycles. All these results demonstrate that this study provides a simple, scalable, and efficient approach to fabricate high performance flexible all‐solid‐state ASCs for energy storage.     

Facile Synthesis of Hematite Quantum‐Dot/Functionalized Graphene‐Sheet Composites as Advanced Anode Materials for Asymmetric Supercapacitors

For building high‐energy density asymmetric supercapacitors, developing anode materials with large specific capacitance remains a great challenge. Although Fe₂O₃ has been considered as a promising anode material for asymmetric supercapacitors, the specific capacitance of the Fe₂O₃‐based anodes is still low and cannot match that of cathodes in the full cells. In this work, a composite material with well dispersed Fe₂O₃ quantum dots (QDs, ≈2 nm) decorated on functionalized graphene‐sheets (FGS) is prepared by a facile and scalable method. The Fe₂O₃ QDs/FGS composites exhibit a large specific capacitance up to 347 F g^?1 in 1 m Na₂SO₄ between –1 and 0 V versus Ag/AgCl. An asymmetric supercapacitor operating at 2 V is fabricated using Fe₂O₃/FGS as anode and MnO₂/FGS as cathode in 1 m Na₂SO₄ aqueous electrolyte. The Fe₂O₃/FGS//MnO₂/FGS asymmetric supercapacitor shows a high energy density of 50.7 Wh kg^?1 at a power density of 100 W kg^?1 as well as excellent cycling stability and power capability. The facile synthesis method and superior supercapacitive performance of the Fe₂O₃ QDs/FGS composites make them promising as anode materials for high‐performance asymmetric supercapacitors.     

Layered H2Ti6O13‐Nanowires: A New Promising Pseudocapacitive Material in Non‐Aqueous Electrolyte

Layered H₂Ti₆O₁₃‐nanowires are prepared using a facile hydrothermal method and their Li‐storage behavior is investigated in non‐aqueous electrolyte. The achieved results demonstrate the pseudocapacitive characteristic of Li‐storage in the layered H₂Ti₆O₁₃‐nanowires, which is because of the typical nanosize and expanded interlayer space. The as‐prepared H₂Ti₆O₁₃‐nanowires have a high capacitance of 828 F g^?1 within the potential window from 2.0 to 1.0 V (vs. Li/Li⁺). An asymmetric supercapacitor with high energy density is developed successfully using H₂Ti₆O₁₃‐nanowires as a negative electrode and ordered mesoporous carbon (CMK‐3) as a positive electrode in organic electrolyte. The asymmetric supercapacitor can be cycled reversibly in the voltage range of 1 to 3.5 V and exhibits maximum energy density of 90 Wh kg^?1, which is calculated based on the mass of electrode active materials. This achieved energy density is much higher than previous reports. Additionally, H₂Ti₆O₁₃//CMK‐3 asymmetric supercapacitor displays the highest average power density of 11 000 W kg^?1. These results indicate that the H₂Ti₆O₁₃//CMK‐3 asymmetric supercapacitor should be a promising device for fast energy storage.     

High‐Performance Supercapacitor Applications of NiO‐Nanoparticle‐Decorated Millimeter‐Long Vertically Aligned Carbon Nanotube Arrays via an Effective Supercritical CO2‐Assisted Method

Nickel oxide (NiO) nanoparticles are distributed uniformly in the vertically aligned carbon nanotube arrays (VACNTs) with millimeter thickness by an effective supercritical carbon dioxide‐assisted method. The as‐prepared VACNT/NiO hybrid structures are used as electrodes without binders and conducting additives for supercapacitor applications. Due to the synergetic effects of NiO and VACNTs with nanoporous structures and parallel 1D conductive paths for electrons, the supercapacitors exhibit a high capacitance of 1088.44 F g^?1. Furthermore, an asymmetric supercapacitor is assembled using the as‐synthesized VACNTs/NiO hybrids as the positive electrode and the VACNTs as the negative electrode. Remarkably, the energy density of the asymmetric supercapacitor is as high as 90.9 Wh kg^?1 at 3.2 kW kg^?1 and the maximum power density reaches 25.6 kW kg^?1 at 24.9 Wh kg^?1, which are superior to those of the NiO or VACNTs‐based asymmetric supercapacitors. More importantly, the asymmetric supercapacitors exhibit capacitance retention of 87.1% after 2000 cycles at 5 A g^?1. The work provides a novel approach in decorating highly dense and long VACNTs with active materials, which are promising electrodes for supercapacitors with ultrahigh power density and energy density.     

Hierarchical Composite Electrodes of Nickel Oxide Nanoflake 3D Graphene for High‐Performance Pseudocapacitors

NiO nanoflakes are created with a simple hydrothermal method on 3D (three‐dimensional) graphene scaffolds grown on Ni foams by microwave plasma enhanced chemical vapor deposition (MPCVD). Such as‐grown NiO‐3D graphene hierarchical composites are then applied as monolithic electrodes for a pseudo‐supercapacitor application without needing binders or metal‐based current collectors. Electrochemical measurements impart that the hierarchical NiO‐3D graphene composite delivers a high specific capacitance of ≈1829 F g^?1 at a current density of 3 A g^?1 (the theoretical capacitance of NiO is 2584 F g^?1). Furthermore, a full‐cell is realized with an energy density of 138 Wh kg^?1 at a power density of 5.25 kW kg^?1, which is much superior to commercial ones as well as reported devices in asymmetric capacitors of NiO. More attractively, this asymmetric supercapacitor exhibits capacitance retention of 85% after 5000 cycles relative to the initial value of the 1^st cycle.     

Direct Ink Writing of Adjustable Electrochemical Energy Storage Device with High Gravimetric Energy Densities

3D printing graphene aerogel with periodic microlattices has great prospects for various practical applications due to their low density, large surface area, high porosity, excellent electrical conductivity, good elasticity, and designed lattice structures. However, the low specific capacitance limits their development in energy storage fields due to the stacking of graphene. Therefore, constructing a graphene‐based 2D materials hybridization aerogel that consists of the pseduocapacitive substance and graphene material is necessary for enhancing electrochemical performance. Herein, 3D printing periodic graphene‐based composite hybrid aerogel microlattices (HAMs) are reported via 3D printing direct ink writing technology. The rich porous structure, high electrical conductivity, and highly interconnected networks of the HAMs aid electron and ion transport, further enabling excellent capacitive performance for supercapacitors. An asymmetric supercapacitor device is assembled by two different 4‐mm‐thick electrodes, which can yield high gravimetric specific capacitance (C_g) of 149.71 F g^?1 at a current density of 0.5 A g^?1 and gravimetric energy density (E_g) of 52.64 Wh kg^?1, and retains a capacitance retention of 95.5% after 10 000 cycles. This work provides a general strategy for designing the graphene‐based mixed‐dimensional hybrid architectures, which can be utilized in energy storage fields.     

Metal–Organic Framework (MOF) Derived Electrodes with Robust and Fast Lithium Storage for Li‐Ion Hybrid Capacitors

Hybrid metal–organic frameworks (MOFs) demonstrate great promise as ideal electrode materials for energy‐related applications. Herein, a well‐organized interleaved composite of graphene‐like nanosheets embedded with MnO₂ nanoparticles (MnO₂@C‐NS) using a manganese‐based MOF and employed as a promising anode material for Li‐ion hybrid capacitor (LIHC) is engineered. This unique hybrid architecture shows intriguing electrochemical properties including high reversible specific capacity 1054 mAh g^?1 (close to the theoretical capacity of MnO₂, 1232 mAh g^?1) at 0.1 A g^?1 with remarkable rate capability and cyclic stability (90% over 1000 cycles). Such a remarkable performance may be assigned to the hierarchical porous ultrathin carbon nanosheets and tightly attached MnO₂ nanoparticles, which provide structural stability and low contact resistance during repetitive lithiation/delithiation processes. Moreover, a novel LIHC is assembled using a MnO₂@C‐NS anode and MOF derived ultrathin nanoporous carbon nanosheets (derived from other potassium‐based MOFs) cathode materials. The LIHC full‐cell delivers an ultrahigh specific energy of 166 Wh kg^?1 at 550 W kg^?1 and maintained to 49.2 Wh kg^?1 even at high specific power of 3.5 kW kg^?1 as well as long cycling stability (91% over 5000 cycles). This work opens new opportunities for designing advanced MOF derived electrodes for next‐generation energy storage devices.     

In Situ Preparation of Sandwich MoO3/C Hybrid Nanostructures for High‐Rate and Ultralong‐Life Supercapacitors

This work presents a design of sandwich MoO₃/C hybrid nanostructure via calcination of the dodecylamine‐intercalated layered α‐MoO₃, leading to the in situ production of the interlayered graphene layer. The sample with a high degree of graphitization of graphene layer and more interlayered void region exhibits the most outstanding energy storage performance. The obtained material is capable of delivering a high specific capacitance of 331 F g^?1 at a current density of 1 A g^?1 and retained 71% capacitance at 10 A g^?1. In addition, nearly no discharge capacity decay between 1000 and 10 000 continuous charge–discharge cycles is observed at a high current density of 10 A g^?1, indicating an excellent specific capacitance retention ability. The exceptional rate capability endows the electrode with a high energy density of 41.2 W h kg^?1 and a high power density of 12.0 kW kg^?1 simultaneously. The excellent performance is attributed to the sandwich hybrid nanostructure of MoO₃/C with broad ion diffusion pathway, low charge‐transfer resistance, and robust structure at high current density for long‐time cycling. The present work provides an insight into the fabrication of novel electrode materials with both enhanced rate capability and cyclability for potential use in supercapacitor and other energy storage devices.     

High‐Performance Supercapacitors Based on a Zwitterionic Network of Covalently Functionalized Graphene with Iron Tetraaminophthalocyanine

Graphene derivatives are promising candidates as electrode materials in supercapacitor cells, therefore, functionalization strategies are pursued to improve their performance. A scalable approach is reported for preparing a covalently and homogenously functionalized graphene with iron tetraaminophthalocyanine (FePc‐NH₂) with a high degree of functionalization. This is achieved by exploiting fluorographene's reactivity with the diethyl bromomalonate, producing graphene‐dicarboxylic acid after hydrolysis, which is conjugated with FePc‐NH₂. The material exhibits an ultrahigh gravimetric specific capacitance of 960 F g^?1 at 1 A g^?1 and zero losses upon charging–discharging cycling. The energy density of 59 Wh kg^?1 is eminent among supercapacitors operating in aqueous electrolytes with graphene‐based electrode materials. This is attributed to the structural and functional synergy of the covalently bound components, giving rise to a zwitterionic surface with extensive π–π stacking, but not graphene restacking, all being very beneficial for charge and ionic transport. The safety of the proposed system, owing to the benign Na₂SO₄ aqueous electrolyte, the high capacitance, energy density, and potential of preparing the electrode material on a large‐scale and at low cost make the reported strategy very attractive for development of supercapacitors based on the covalent attachment of suitable molecules onto graphene toward high‐synergy hybrids.     

2D Thin Nanoflakes Assembled on Mesoporous Carbon Nanorods for Enhancing Electrocatalysis and for Improving Asymmetric Supercapacitors

Carbon nanomaterials are of great interest as the advanced supports of electrochemical active materials to enhance their performances, however, little knowledge has been put into understanding whether the pores of carbon nanomaterials as supports can tune the performance of energy storage and conversion devices due to the lack of methods for making porous carbon nanomaterials. Herein, this study demonstrates the use of 1D ordered mesoporous carbon nanorods (OMCRs) with high surface area as a new class of supports for 2D ultrathin MoS₂ and MnO₂ nanoplates to create the interesting hierarchical nanohybrids (MoS₂@OMCRs and MnO₂@OMCRs), respectively. With the significant role of OMCRs in optimizing the electron and charge transportation, MoS₂@OMCRs exhibits remarkable activity for catalyzing hydrogen evolution reaction with a low onset overpotential of 105 mV and low Tafel slope of 40 mV dec^?1, much better than those of MoS₂@ carbon nanofibers. Significantly, the asymmetric supercapacitor based on MnO₂@OMCRs as anode and OMCRS as cathode displays a maximum specific capacitance up to 100 F g^?1 at 0.2 A g^?1 and a high energy density of 55.2 W h kg^?1 at the power density of 200 W kg^?1 within a wide operating voltage of 2.0 V. The present work highlights the important role of the mesoporous carbon support in achieving the advanced energy storage and conversion.     

A Continuous Carbon Nitride Polyhedron Assembly for High‐Performance Flexible Supercapacitors

Flexible supercapacitors with high power density, flexibility, and durability have shown enormous potential for smart electronics. Here, a continuous graphitic carbon nitride polyhedron assembly for flexible supercapacitor that is prepared by pyrolysis of carbon nanotubes wired zeolitic imidazolate framework‐8 (ZIF‐8) composites under nitrogen is reported. It exhibits a high specific capacitance of 426 F g^?1 at current density of 1 A g^?1 in 1 m H₂SO₄ and excellent stability over 10 000 cycles. The remarkable performance results from the continuous hierarchical structure with average pore size of 2.5 nm, high nitrogen‐doping level (17.82%), and large specific surface area (920 m² g^?1). Furthermore, a flexible supercapacitor is developed by constructing the assembly with interpenetrating polymer network electrolyte. Stemming from the synergistic effect of high‐performance electrode and highly ion‐conductive electrolyte, superior energy density of 59.40 Wh kg^?1 at 1 A g^?1 is achieved. The device maintains a stable energy supply under cyclic deformations, showing wide application in flexible and even wearable conditions. The work paves a new way for designing pliable electrode with excellent electronic and mechanic property for long‐lived flexible energy storage devices.     

Superior Micro‐Supercapacitors Based on Graphene Quantum Dots

Graphene quantum dots (GQDs) have attracted tremendous research interest due to the unique properties associated with both graphene and quantum dots. Here, a new application of GQDs as ideal electrode materials for supercapacitors is reported. To this end, a GQDs//GQDs symmetric micro‐supercapacitor is prepared using a simple electro‐deposition approach, and its electrochemical properties in aqueous electrolyte and ionic liquid electrolyte are systematically investigated. The results show that the as‐made GQDs micro‐supercapacitor has superior rate capability up to 1000 V s^?1, excellent power response with very short relaxation time constant (τ₀ = 103.6 μs in aqueous electrolyte and τ₀ = 53.8 μs in ionic liquid electrolyte), and excellent cycle stability. Additionally, another GQDs//MnO₂ asymmetric supercapacitor is also built using MnO₂ nanoneedles as the positive electrode and GQDs as the negative electrode in aqueous electrolyte. Its specific capacitance and energy density are both two times higher than those of GQDs//GQDs symmetric micro‐supercapacitor in the same electrolyte. The results presented here may pave the way for a new promising application of GQDs in micropower suppliers and microenergy storage devices.     

Flexible Solid‐State Supercapacitors with Enhanced Performance from Hierarchically Graphene Nanocomposite Electrodes and Ionic Liquid Incorporated Gel Polymer Electrolyte

High energy density, durability, and flexibility of supercapacitors are required urgently for the next generation of wearable and portable electronic devices. Herein, a novel strategy is introduced to boost the energy density of flexible soild‐state supercapacitors via rational design of hierarchically graphene nanocomposite (GNC) electrode material and employing an ionic liquid gel polymer electrolyte. The hierarchical graphene nanocomposite consisting of graphene and polyaniline‐derived carbon is synthesized as an electrode material via a scalable process. The meso/microporous graphene nanocomposites exhibit a high specific capacitance of 176 F g^?1 at 0.5 A g^?1 in the ionic liquid 1‐ethyl‐3‐methylimidazolium tetrafluoroborate (EMIBF₄) with a wide voltage window of 3.5 V, good rate capability of 80.7% in the range of 0.5–10 A g^?1 and excellent stability over 10 000 cycles, which is attributed to the superior conductivity (7246 S m^?1), and quite large specific surface area (2416 m² g^?1) as well as hierarchical meso/micropores distribution of the electrode materials. Furthermore, flexible solid‐state supercapacitor devices based on the GNC electrodes and gel polymer electrolyte film are assembled, which offer high specific capacitance of 180 F g^?1 at 1 A g^?1, large energy density of 75 Wh Kg^?1, and remarkable flexible performance under consecutive bending conditions.     

Electrochemically Derived Graphene‐Like Carbon Film as a Superb Substrate for High‐Performance Aqueous Zn‐Ion Batteries

3D graphene, as a light substrate for active loadings, is essential to achieve high energy density for aqueous Zn‐ion batteries, yet traditional synthesis routes are inefficient with high energy consumption. Reported here is a simplified procedure to transform the raw graphite paper directly into the graphene‐like carbon film (GCF). The electrochemically derived GCF contains a 2D–3D hybrid network with interconnected graphene sheets, and offers a highly porous structure. To realize high energy density, the Na:MnO₂/GCF cathode and Zn/GCF anode are fabricated by electrochemical deposition. The GCF‐based Zn‐ion batteries deliver a high initial discharge capacity of 381.8 mA h g^?1 at 100 mA g^?1 and a reversible capacity of 188.0 mA h g^?1 after 1000 cycles at 1000 mA g^?1. Moreover, a recorded energy density of 511.9 Wh kg^?1 is obtained at a power density of 137 W kg^?1. The electrochemical kinetics measurement reveals the high capacitive contribution of the GCF and a co‐insertion/desertion mechanism of H⁺ and Zn²⁺ ions. First‐principles calculations are also carried out to investigate the effect of Na⁺ doping on the electrochemical performance of layered δ‐MnO₂ cathodes. The results demonstrate the attractive potential of the GCF substrate in the application of the rechargeable batteries.