Distribution of calcium carbonate and silicone elastomer in a flame retardant system based on ethylene–acrylate copolymer,chalk and silicone elastomer and its effect on flame retardant properties

A combination of microscopy studies (SEM, ESEM/EDX, and TEM/EDX) is proven to be useful in locating chalk particles and silicone elastomer in a flame retardant system based on ethylene–acrylate copolymer, chalk, and silicone elastomer. The dispersion of the two additives was also obtained. The chalk particles were visually observed (at a certain degree of magnification), and the silicone elastomer was detected using characteristic X‐ray mapping and line scans. The analysis provided a good contrast between chalk particles and silicone elastomer in the surrounding polymer matrix. It is shown that dispersion of the additives depends on the mixing conditions, where tougher mixing conditions improve dispersion. A discussion is given on how dispersion correlates with the flame retardant properties of this system. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2085–2095, 2006     

Synergistic effect between silicone‐containing macromolecular charring agent and ammonium polyphosphate in flame retardant polypropylene

A novel silicone‐containing macromolecular charring agent (Si‐MCA) was synthesized via polycondensation, and it was combined with ammonium polyphosphate (APP) to flame retard polypropylene (PP). The results showed that Si‐MCA exhibited a good synergistic effect with APP in flame retardant PP. When the content of APP was 18.7 wt % and Si‐MCA was 6.3 wt %, the limiting oxygen index value of the PP/APP/Si‐MCA composite was 33.5%, and the vertical burning (UL 94) test classed a V‐0 rating. The peak heat release rate, total heat release, average mass loss rate, and total smoke production of the composite were also decreased significantly. Moreover, the PP/APP/Si‐MCA composite showed an outstanding water resistance. After soaking in 70°C water for 168 h, the PP/APP/Si‐MCA composite could still reach a UL 94 V‐0 rating at 20.0 wt % IFR loading, whereas the PP/APP/PER composite failed to pass the UL 94 test even at 25.0 wt % IFR loading. Thermogravimetric analysis, thermogravimetry‐Fourier transform infrared spectrometry, and scanning electron microscopy‐energy dispersive X‐ray spectrometry results revealed that a compact and thermostable intumescent char was formed by APP/Si‐MCA during burning, thus effectively improved the flame retardancy of PP. The possible synergistic mechanism between APP and Si‐MCA was also discussed. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41580.     

Reactive,intumescent, halogen‐free flame retardant for polypropylene

A reactive, intumescent, halogen‐free flame retardant, 2‐({9‐[(4,6‐diamino‐1,3,5‐triazin‐2‐yl)amino]‐3,9‐dioxido‐2,4,8,10‐tetraoxa‐3,9‐diphosphaspiro[5.5]undecan‐3‐yl}oxy)ethyl methacrylate (EADP), was synthesized through a simple three‐step reaction from phosphorus oxychloride, pentaerythritol, hydroxyethyl methacrylate, and melamine. EADP exhibited excellent thermal stability and char‐forming ability, as revealed by thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The TGA results show that the temperature at 5% weight loss was 297.8°C and the char yield at 700°C was 51.75%. SEM observation revealed that the char showed a continuous and compact surface and a cellular inner structure with different sizes. Composite of polypropylene (PP) with a 25 wt % addition of EADP (PP/EADP25) passed the UL‐94 V‐0 rating and showed a limiting oxygen index value of 31.5. Compared with those of neat PP, the flexural strength and modulus values of PP/EADP25 were somewhat improved, the tensile strength was basically unchanged, and the notched Izod impact strength was slightly decreased. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40054.     

Synergistic flame retardant effect of piperazine salt and ammonium polyphosphate as intumescent flame retardant system for polypropylene

Amino trimethylene phosphonic acid piperazine (ATPIP) salt, as a novel charring agent, is prepared via a simple ionic reaction in distilled water using amino trimethylene phosphate (ATMP) and piperazine as raw materials. The synergistic flame retardant effect of ATPIP and ammonium polyphosphate (APP) as an intumescent flame retardant (IFR) is investigated by various characterization and testing methods. The results show that the polypropylene (PP)/modified APP with piperazine (MAPP)/ATPIP ternary blend passes UL-94 V-0 rating and achieve a limiting oxygen index (LOI) of 30% at a loading level of 25 wt% IFR (MAPP:ATPIP = 3:1). Meanwhile, the total smoke production (TSP) value of IFR-PP samples is 3.3 m², which decreases by 93.2% compared with that of pure PP, exhibiting excellent smoke suppression performance. Besides, the analysis of gaseous pyrolysis products and char residue indicates that the IFR-PP samples show a synergistic flame-retardant mechanism including the gas phase and the condensed phase.     

Thermal degradation and combustion behavior of intumescent flame‐retardant polypropylene with novel phosphorus‐based flame retardants

The objective of this study was to develop an environmentally friendly fire‐retardant polypropylene (PP) with significantly improved fire‐retardancy performance with a novel flame‐retardant (FR) system. The system was composed of ammonium polyphosphate (APP), melamine (MEL), and novel phosphorus‐based FRs. Because of the synergistic FR effects among the three FRs, the FR PP composites achieved a V‐0 classification, and the limiting oxygen index reached as high as 36.5%. In the cone calorimeter test, both the peak heat‐release rate (pHRR) and total heat release (THR) of the FR PP composites were remarkably reduced by the incorporation of the novel FR system. The FR mechanism of the MEL–APP–FR–PP composites was investigated through thermogravimetric analysis and char residue characterization, and the results reveal that the addition of MEL–APP–FRs promoted the formation of stable intumescent char layers. This led to the reduction of pHRR and THR and resulted in the improvement of the fire retardancy. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45962.     

Component ratio effects of hyperbranched triazine compound and ammonium polyphosphate in flame‐retardant polypropylene composites

A hyperbranched derivative of triazine group (EA) was synthesized by elimination reaction between ethylenediamine and cyanuric chloride. The different‐mass‐ratio EA and ammonium polyphosphate (APP) were mixed and blended with polypropylene (PP) in a constant amount (25%) to prepare a series of EA/APP/PP composites. The component ratio effect of EA/APP on the flame‐retardant property of the EA/APP/PP composites was investigated using the limiting oxygen index (LOI), vertical burning (UL‐94), and cone calorimetry tests. Results indicated that the EA/APP/PP (7.50/17.50/75.00) composite with the appropriate EA/APP mass ratio had the highest LOI, UL94 V‐0 rating, lowest heat release rate, and highest residue yield. These results implied that the appropriate EA/APP mass ratio formed a better intumescent flame‐retardant system and adequately exerted their synergistic effects. Furthermore, average effective combustion heat values revealed that EA/APP flame retardant possessed the gaseous‐phase flame‐retardant effect on PP. Residues of the EA/APP/PP composites were also investigated by scanning electron microscopy, Fourier‐transform infrared, and X‐ray photoelectron spectroscopy. Results demonstrated that the appropriate EA/APP mass ratio can fully interact and lock more chemical constituents containing carbon and nitrogen in the residue, thereby resulting in the formation of a dense, compact, and intumescent char layer. This char layer exerted a condensed‐phase flame‐retardant effect on EA/APP/PP composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41006.     

Preparation of a chitosan‐based flame‐retardant synergist and its application in flame‐retardant polypropylene

A novel flame‐retardant synergist, chitosan/urea compound based phosphonic acid melamine salt (HUMCS), was synthesized and characterized by Fourier transform infrared spectroscopy and ³¹P‐NMR. Subsequently, HUMCS was added to a fire‐retardant polypropylene (PP) compound containing an intumescent flame‐retardant (IFR) system to improve its flame‐retardant properties. The PP/IFR/HUMCS composites were characterized by limiting oxygen index (LOI) tests, vertical burning tests (UL‐94 tests), microscale combustion calorimetry tests, and thermogravimetric analysis to study the combustion behavior and thermal stability. The addition of 3 wt % HUMCS increased the LOI from 31.4 to 33.0. The addition of HUMCS at a low additive amount reduced the peak heat‐release rate, total heat release, and heat‐release capacity obviously. Furthermore, scanning electron micrographs of char residues revealed that HUMCS could prevent the IFR–PP composites from forming a dense and compact multicell char, which could effectively protect the substrate material from combusting. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40845.     

PP成炭阻燃研究进展

从聚合物成炭、含硅化合物协效成炭、金属及其化合物催化成炭和无机纳米材料协效成炭等方面,综述了聚丙烯(PP)在成炭阻燃领域的研究进展。通过添加不同的协效成炭剂可以提高PP燃烧时的成炭量和成炭效率。运用多种方法协同作用正成为PP阻燃的研究方向。     

Effect of chicken‐feather protein‐based flame retardant on flame retarding performance of cotton fabric

A new kind of eco‐friendly chicken‐feather protein‐based phosphorus–nitrogen‐containing flame retardant was synthesized successfully with chicken‐feather protein, melamine, sodium pyrophosphate, and glyoxal. And its structure was characterized by Fourier transform infrared spectroscopy, and the thermogravimetry of the agent was analyzed. Then the flame retarding performances of the chicken‐feather protein‐based flame retardant and in combination with the borax and boric acid in application to a woven cotton fabric were investigated by the vertical flammability test and limited oxygen index test. In addition, the surface morphologies of the treated and untreated fabrics were conducted by the scanning electron micrographs (SEM), and the thermogravimetric analyses of the treated and untreated cotton were explored, and the surface morphologies of char areas of the treated and untreated fabrics after burnt were tested by the SEM. The results showed that the flame retardancy of the cotton fabric treated by the chicken‐feather protein‐based flame retardant in combination with borax and boric acid was improved further, and the combination of the chicken‐feather protein‐based flame retardant and borax and boric acid could facilitate to form a homogenous and compact intumescing char layer, and the combination of them plays a good synergistic effect in the improvement of the flame retardancy of the treated cotton fabric. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40584.     

Synergistic effects of dual imidazolium polyoxometalates on intumescent flame retardant polypropylene

The role of dual imidazolium polyoxometalates (POMs) in the flame retardancy of polypropylene/intumescent flame retardant (PP/IFR) composites was studied. The results showed that the structures of dual imidazolium POMs have a great effect on the flame retardancy of PP composites. The dual imidazolium POMs based on an ethyl group (EMIPMA) obtain the best flame retardant efficiency. With 15.5 wt % IFR and 0.5 wt % EMIPMA, the PP composites reach a limiting oxygen index of 25.7 and the UL‐94 V‐0 standard. However, the dual imidazolium POMs containing a butyl (BMIPMA) or hexyl (HMIPMA) group cannot achieve the UL‐94 V‐0 standard at the same formulation. Dual imidazolium POMs not only promote the formation of good char, but also induce the formation of intumescent char with a hierarchical and microporous structure that helps to prevent gas and heat from transferring from the flame to the resin. Therefore, the flame retardancy of PP/IFR composites is improved. However, excessive combustible components produced by BMIPMA or HMIPMA deteriorate the flame retardancy of PP/IFR composites. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45491.     

Synthesis,thermal degradation,and flame retardance of novel triazine ring‐containing macromolecules for intumescent flame retardant polypropylene

Two novel triazine ring‐containing macromolecules, designated as charring‐foaming agent 1 (CFA1) and charring‐foaming agent 2 (CFA2), were synthesized by a series of polycondensation reactions. Their chemical structures were analyzed by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy (¹³C solid‐state NMR), and elemental analysis, and their thermal degradation properties were assessed by thermogravimetric analysis (TGA). TGA data revealed that CFA1 and CFA2 show high thermal stability and have a high propensity for char formation, their initial decomposition temperatures being 300.2°C and 287.1°C, and their char residues at 800°C amounting to 32.2 wt % and 21.1 wt %, respectively. CFA1 presents higher thermal stability and more char residue than CFA2. Based on experimental results of the flame retardancy (limiting oxygen indices values and UL‐94 V‐0 rating) and the TG data of new intumescent flame retardant polypropylene (IFR‐PP) containing CFA1 and CFA2, CFA1 exhibits more outstanding intumescent flame retardance than CFA2. IFRs containing CFA1 and CFA2 enhanced Notched Izod Impact strength of IFR‐PP, and slightly lower tensile strength of IFR‐PP. IFR2 shows more advantageous effect on mechanical properties of IFR‐PP than IFR1. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of triphenyl phosphate flame retardant on properties of arylamine‐based polybenzoxazines

Three types of arylamine‐based benzoxazine resins modified with both condensed‐phase and gas‐phase action flame retardant, i.e. triphenyl phosphate (TPP) at various weight ratios were investigated. From rheological study, it was found that the viscosity of benzoxazines/TPP mixtures were significantly lower than that of the neat benzoxazine monomers suggesting flow property enhancement. Furthermore, differential scanning calorimetry results revealed that the onset and the maximum temperatures of the exothermic peak, due to the ring opening polymerization of benzoxazine resins, shifted to lower temperatures with increasing TPP. In addition, all polybenzoxazines possessed relatively high char yield, which increased as the TPP content increased thus enhancing their flame retardancy. The limiting oxygen index values of the flame retarded polybenzoxazines also increased with TPP addition. The maximum flame retardancy of UL94 V‐0 class was obtained with an addition of only few percents of TPP in the polybenzoxazines. Flexural strength, flexural modulus, and glass transition temperature of those polybenzoxazines tended to decrease with an addition of TPP mainly due to its plasticizing effect. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1074‐1083, 2013     

Synthesis of phosphorus‐containing flame‐retardant antistatic copolymers and their applications in polypropylene

By adjusting the molar ratios of antistatic monomer of octyl phenol ethylene oxide acrylate (denoted as AS), rigid monomer of methyl methacrylate (denoted as MMA), and flame‐retardant monomer of 2‐(phosphoryloxymethyl oxyethylene) acrylate (denoted as FR), a series of flame‐retardant antistatic copolymers poly (octyl phenol ethylene oxide acrylate‐co‐methyl methacrylate‐co‐phosphoryloxymethyl oxyethylene acrylate) (donated as AMF) were synthesized through radical polymerization. Among the obtained copolymers, two copolymers, AMF162 (the feed molar ratio of AS, MMA, and FR as 1 : 6 : 2) and AMF1104 (the feed molar ratio of AS, MMA, and FR as 1 : 10 : 4) with different concentrations were added into polypropylene (PP) to prepare PP‐AMF162 and PP‐AMF1104 series of composites. The thermal stability, limiting oxygen index, the antistatic property, and mechanical properties of PP composites were tested and analyzed. PP‐AMF162 series composites have excellent antistatic effect. When the AMF162 content was equal to or <15 wt %, the impact strength of PP‐AMF162 composites was higher than that of pure PP. The results indicated that copolymer AMF162 was a suitable flame‐retardant and antistatic additive for PP. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41677.     

Flame‐retardant mechanism of expandable polystyrene foam with a macromolecular nitrogen–phosphorus intumescent flame retardant

Expandable polystyrene (EPS) foam is largely used as the thermally insulating external wall in buildings and constructions, but it is extremely flammable because of the presence of almost 98% air into its porous structure, its high surface‐area‐to‐mass ratio, and its elemental composition. Lots of serious fire disasters caused by EPS foam have posed great threats to people's properties and lives in recent years. Thus, a halogen‐free, flame‐retardant EPS is urgently needed, and its preparation is still a global challenge. To solve the problem that it is easy for EPS foam to form melt dripping and difficult for it to generate a char layer during the combustion process, a macromolecular nitrogen–phosphorus intumescent flame retardant (MNP) was selected to prepare flame‐retardant EPS foam and good mechanical and flame‐retardant properties were obtained. The scanning electron microscopy characterization revealed that MNP could penetrate into the gap between the beads, and a thin physical coating layer formed on the surface of the bead. The data from the thermogravimetry–Fourier transform infrared test indicated that a nitrogenous noncombustible gas was generated by the pyrolysis of MNP. When the MNP content increased to 30%, the limiting oxygen index and the smoking density rate of the EPS–MNP foam were 28.8 and 23.6, respectively, and a UL94 V‐0 classification was achieved. In addition, the heat‐release rate, total heat‐release, smoke produce rate, and carbon dioxide production of the EPS–MNP foams all decreased obviously; this was attributed to the flame‐retardant effects of MNP in both the condensed and gas phases. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44356.     

A phosphorus‐containing inorganic compound as an effective flame retardant for glass‐fiber‐reinforced polyamide 6

A novel inorganic compound, aluminum hypophosphite (AP), was synthesized successfully and applied as a flame retardant to glass‐fiber‐reinforced polyamide 6 (GF–PA6). The thermal stability and burning behaviors of the GF–PA6 samples containing AP (flame‐retardant GF–PA6) were investigated by thermogravimetric analysis, vertical burning testing (with a UL‐94 instrument), limiting oxygen index (LOI) testing, and cone calorimeter testing (CCT). The thermogravimetric data indicated that the addition of AP decreased the onset decomposition temperatures, the maximum mass loss rate (MLR), and the maximum‐rate decomposition temperature of GF–PA6 and increased the residue chars of the samples. Compared with the neat GF–PA6, the AP‐containing GF–PA6 samples had obviously improved flame retardancy: the LOI value increased from 22.5 to 30.1, and the UL‐94 rating went from no rating to V‐0 (1.6 mm) when the AP content increased from 0 to 25 wt % in GF–PA6. The results of CCT reveal that the heat release rate, total heat release, and MLR of the AP‐containing GF–PA6 samples were lower than those of GF–PA6. Furthermore, the higher additive amount of AP affected the mechanical properties of GF–PA6, but they remained acceptable. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

High-efficiency ammonium polyphosphate intumescent encapsulated polypropylene flame retardant

The flame retardant polypropylene containing the micro-envelope core-shell structure flame retardant, which encapsulated ammonium polyphosphate into melamine-formaldehyde resin and sodium silicate through in situ polymerization was prepared with polyamide 6, added as a carbon-forming agent. The composition of ammonium polyphosphate, encapsulated ammonium polyphosphate with melamine-formaldehyde resin and the micro-envelope core-shell structure flame retardant were characterized. The fire safety and thermal stability were investigated and showed an improvement including limiting oxygen index, thermogravimetric analysis, vertical burning tests, and microscale combustion calorimeter. The burned compounds were also studied to confirm the burning mechanism. The results showed the flame retardant performance had been greatly improved, while polyamide 6 had better char-forming effect. Besides, the water solubility of flame retardants and their influence on the mechanical properties of polypropylene were also investigated. The results on the effects of additives demonstrated a high efficiency flame retardant to polypropylene. A core-shell flame retardant that sodium silicate and melamine-formaldehyde resin-coated ammonium polyphosphate had been constructed. The effect of the built flame retardant system on the combustion performance of polypropylene was studied from the mechanism and performance. The LOI of the most flame retardant polypropylene reached 28.6%, and UL-94 reached the V-0 level.     

The preparation of fully bio‐based flame retardant poly(lactic acid) composites containing casein

In this work, a bio‐based flame retardant, casein, was incorporated into poly(lactic acid) (PLA) matrix by melt compounding in order to improve the fire resistance and sustain the biodegradable character of PLA simultaneously. The fire performance of PLA composites was evaluated by limiting oxygen index, UL‐94 vertical burning, and cone calorimeter tests, respectively. The results indicated that the introduction of 20% casein increased the limiting oxygen index value of PLA composites from 20.0% to 32.2%, upgraded the UL‐94 rating from no rating to V‐0, and decreased the peak heat release rate from 779 to 639 kW/m². The decomposition products of PLA composites were analyzed by Fourier transform infrared, and the morphology of the char after combustion was observed by scanning electron microscopy. It was suggested that casein took effects in both gas phase by releasing non‐flammable gases (such as NH₃ and H₂O) and condensed phase by the formation of protective char layers. However, the presence of casein in PLA induced an unavoidable deterioration in the mechanical performance. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46599.     

Melamine polyphosphate/silicon‐modified phenolic resin flame retardant glass fiber reinforced polyamide‐6

The halogen‐free flame retardance of glass fiber reinforced polyamide‐6 (PA6) is an everlastingly challenge due to well‐known wick effect. In this research, a novel system composed of a nitrogen–phosphorous flame retardant, melamine polyphosphate combined with a macromolecular charring agent, silicon‐modified phenolic resin (SPR), was employed to flame‐retard glass fiber reinforced PA6. It exhibited obvious synergistic effect between the two components at a proper ratio range. The flame retardance of the composites can be remarkably improved due to the increased amount and improved thermal stability of the produced char. The flame resistance tests indicated that the synergism system with an optimized ratio achieved V0 (1.6 mm) rating of UL94, 25.2% of Limited Oxygen Index, and only 338.2 W/g of the heat release peak rate. The corresponding synergistic mechanisms were investigated by the characterizations including the thermal gravimetric analysis, carbonation test, and the char morphology observation. It confirmed that the introduced SPR could accelerate the carbonation of PA6 resin, which was in favor of the construction of denser and more continuous charring structure. In addition, the flame retardant materials also indicated the acceptable mechanical properties, showing the advantages in the overall performance. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

A formaldehyde‐free flame retardant wood particleboard system based on two‐component polyurethane adhesive

To address the problem of formaldehyde‐free flame retardation of wood particleboard, a novel phosphorus‐containing compound, di(2,2‐dimethyl‐1,3‐propanediol phosphate) urea (DDPPU) was synthesized. DDPPU was used as flame retardant for wood particleboard. The flammability of treated wood particleboard systems consisted of wood particles, polyurethane (PU) adhesive, and different flame retardant formulations were investigated by limiting oxygen index (LOI). The results of LOI indicate that DDPPU could improve the flame retardancy of wood particleboard. However, when H₃BO₃ was used as the second flame retardant component and combined with DDPPU, the flame retardant wood particleboard could obtain the highest LOI value (46.0) in these experiments. Thermogravimetric analysis shows that treated wood particleboard can decrease the initial decomposition temperature, and that at higher temperatures the degradation rate are lower than the untreated wood particleboard. Furthermore, wood particleboard treated with DDPPU/H₃BO₃ has a higher yield of residue char at 600°C than that treated with other flame retardant systems. The ability of char formation of these samples agrees with the order of LOI values. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

The flame retardant group‐synergistic‐effect of a phosphaphenanthrene and triazine double‐group compound in epoxy resin

A flame retardant tri‐(phosphaphenanthrene‐(hydroxyl‐methylene)‐phenoxyl)‐1, 3, 5‐triazine (Trif‐DOPO) and its control samples are incorporated into diglycidyl ether of bisphenol‐A (DGEBA) and 4, 4′‐diamino‐diphenyl sulfone (DDS) to prepare flame retardant thermosets, respectively. According to the results of limited oxygen index (LOI), UL94 vertical burning test and cone calorimeter test, the Trif‐DOPO/DGEBA/DDS thermoset with 1.2 wt % phosphorus possesses the LOI value of 36% and UL94 V‐0 flammability rating, and Trif‐DOPO can decrease the peak of heat release rate (pk‐HRR) and reduce the total heat release (THR) of thermosets. All these prove better flame retardant performance of Trif‐DOPO than that of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide(DOPO). The residue photos of thermosets after cone calorimetry test disclose that Trif‐DOPO can promote the formation of thick and tough melting char layer for combined action of the flame retardant groups of Trif‐DOPO. The results from thermo gravimetric analysis (TGA) and pyrolysis‐gas chromatography‐mass spectrometry(Py‐GC/MS) show that the groups in Trif‐DOPO can be decomposed and produce PO₂ fragments, phosphaphenanthrene and phenoxy fragments, which can jointly quench the free radical chain reaction during combustion. Therefore, the excellent flame retardancy of Trif‐DOPO is attributed to its flame retardant group‐synergic‐effect. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39709.