Novel synthesis of poly(methyl methacrylate) brush encapsulated silica particles

Silica (SiO₂)‐crosslinked polystyrene (PS) particles possessing photofunctional N,N‐diethyldithiocarbamate (DC) groups on their surface were prepared by the free‐radical emulsion copolymerization of a mixture of SiO₂ (diameter = 20 nm), styrene, divinyl benzene, 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC), and 2‐hydroxyethyl methacrylate with a radical initiator under UV irradiation. In this copolymerization, the inimer VBDC had the formation of a hyperbranched structure by a living radical mechanism. The particle sizes of such core–shell structures [number‐average particle diameter (D_n) = 35–40 nm] were controlled by the variation of the feed amounts of the monomers and surfactant, or emulsion system. The size distributions were relatively narrow (weight‐average particle diameter/D_n ≈ 1.05). These particles had DC groups on their surface. Subsequently, poly(methyl methacrylate) brush encapsulated SiO₂ particles were synthesized by the grafting from a photoinduced atom transfer radical polymerization approach of methyl methacrylate initiated by SiO₂‐crosslinked PS particles as a macroinitiator. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of silica hybrid nanoparticles modified with photofunctional polymers and construction of colloidal crystals

Photofunctional polymer as silane coupling agent (PFD) was prepared by free radical copolymerization of 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC) and methyl methacrylate (MMA) in the presence of (3‐mercaptopropyl)trimethoxysilane (MPMS) as chain transfer agent. Next, silane (SiO₂; the average diameter D_n = 192 nm) nanoparticles was surface‐modified with PFD and 3‐(trimethoxysilyl)propyl methacrylate (γ‐MPS) by covalent bond formed between silanol groups and silane coupling agents. The PFD and γ‐MPS functionalizations changed the silica surface into hydrophobic nature and provided grafting initiation sites and methacrylate terminal groups respectively. We performed the construction of hybrid nanocomposites by using these modified SiO₂ nanoparticles. It was found from electron microscopy observations that SiO₂ particles were packed into repeating cubic arrangements in a poly(methyl methacrylate) (PMMA) matrix such as colloidal crystals. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Nano‐scaled ordering of hyperbranched and star‐hyperbranched polymers

Hyperbranched polystyrenes (HPS) were prepared by living radical polymerization of 4‐vinylbenzyl N,N‐diethyldithiocarbamate (VBDC) as an inimer under UV irradiation. These HPS exhibited large amounts of photofunctional diethyldithiocarbamate (DC) groups on their outside surfaces. We derived star‐HPS (SHPS) by grafting from such HPS macroinitiator with methyl methacrylate (MMA) or ethyl methacrylate (EMA). The ratios of radius of gyration to hydrodynamic radius R_g/R_h for HPS and SHPS in tetrahydrofuran (THF) were in the range of 0.74–0.90 and 1.05–1.12, respectively. HPS and SHPS behaved in a good solvent as hard and soft spheres, respectively. We demonstrated the structural ordering of both branched polymers in THF through small‐angle X‐ray scattering (SAXS), by varying the polymer concentration. As a result, HPS and SHPS formed face‐centered‐cubic (fcc) and body‐centered‐cubic (bcc) structures, respectively, near the overlap threshold (C*). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3340–3345, 2006     

Photografting of PVC containing N,N‐diethyldithiocarbamate groups with vinyl monomers

Poly(vinyl chloride) (PVC) with pendent N,N‐diethyldithiocarbamate groups (PVC–SR) was prepared through the reaction of PVC with sodium N,N‐diethyldithiocarbamate (NaSR) in butanone and used as a photoinitiator for the grafting polymerization of three vinyl monomers [styrene (St), methyl methacrylate (MMA), and acrylamide (Am)]. The effects of ultraviolet (UV) irradiation time, PVC–SR amount, and the monomer amount on grafting and grafting efficiency were investigated. The results showed that PVC–SR could initiate the polymerization of three vinyl monomers effectively and obtained crosslinked copolymers. The grafting and grafting efficiency of styrene and methyl methacrylate were higher than those of acrylamide. The polymerization activity of three monomers was acrylamide > methyl methacrylate > styrene. By analyzing the UV spectrum of PVC–SR with a different irradiation time, it was confirmed that PVC–SR was dissociated mainly into macromolecular the sulfur radical PVC–S · and the small molecular carbon radical · C(S)N(C₂H₅)₂; the grafting polymerization mechanism was discussed. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2569–2574, 2000     

Architecture of nanostructured polymers by segregated domain crosslinking of block‐graft copolymer micelles

Polystyrene‐block‐polyisoprene (PS‐block‐PI; high 3,4‐structure) diblock copolymer was prepared by living anionic polymerization. For transfer into a reactive intermediate, the hydroxylation of the double bonds of PI block was achieved by hydroboration, followed by oxidation. Esterification of the hydroxy‐derivative with stearoyl chloride or decanoyl chloride resulted in block‐graft copolymers composed of PS (flexible chain)‐grafted long alkane (stretched chains). After partial chloromethylation of PS block copolymer, photofunctional N,N‐diethyldithiocarbamate (DC) groups were introduced into such pendant sites by reaction with the corresponding sodium salt. We studied the self‐assemblies of photofunctional block‐graft copolymers in a selective solvent, such as heptane, and constructed nanostructured polymers by crosslinking PS cores under UV irradiation. © 2001 Society of Chemical Industry     

Solution properties of hyperbranched polymers and synthetic application for amphiphilic star‐hyperbranched copolymers by grafting from hyperbranched macroinitiator

Hyperbranched polystyrenes (PS) were prepared by living radical photopolymerization of N,N‐diethyldithiocarbamoylmethylstyrene (DTCS) as an inimer under UV irradiation. Branched PS with an average chain length between branching points of four styrene units was also prepared by living radical copolymerization of DTCS with styrene. The ratio of radius of gyration to hydrodynamic radius R_G/R_H for these hyperbranched polymers was in the range 0.82–0.89 in toluene. The translational diffusion coefficient D(C) showed a constant value in the range of 0–14 × 10^?3 g ml^?1 in toluene. It was found from these dilute solution properties that hyperbranched PSs formed a unimolecular structure even in a good solvent because of their compact nature. These hyperbranched PSs exhibited large amounts of photofunctional carbamate (DC) groups on their outside surfaces. Subsequently, we derived amphiphilic star‐hyperbranched copolymers by grafting from hyperbranched macroinitiator with 1‐vinyl‐2‐pyrrolidinone. These star‐hyperbranched copolymers were soluble in water and methanol. © 2001 Society of Chemical Industry     

Synthesis of poly(aryl ether sulfone)‐graft‐polystyrene and poly(aryl ether sulfone)‐graft‐[polystyrene‐block‐poly(methyl methacrylate)] through atom transfer radical polymerization

A new graft copolymers poly(aryl ether sulfone)‐graft‐polystyrene (PSF‐g‐PS) and poly(aryl ether sulfone)‐graft‐[polystyrene‐block‐poly(methyl methacrylate)] (PSF‐g‐(PS‐b‐PMMA)) were successfully prepared via atom transfer radical polymerisation (ATRP) catalyzed by FeCl₂/isophthalic acid in N,N‐dimethyl formamide. The products were characterized by GPC, DSC, IR, TGA and NMR. The characterization data indicated that the graft copolymerization was accomplished via conventional ATRP mechanism. The effect of chloride content of the macroinitiator on the graft copolymerization was investigated. Only one glass transition temperature (T_g) was detected by DSC for the graft copolymer PSF‐g‐PS and two glass transition temperatures were observed in the DSC curve of PSF‐g‐(PS‐b‐PMMA). The presence of PSF in PSF‐b‐PS or PSF‐g‐(PS‐b‐PMMA) was found to improve thermal stabilities. © 2002 Society of Chemical Industry     

Two‐dimensional regular nanopatterning on block copolymer substrate having lamellar morphology using star‐hyperbranched nanospheres by electrostatic interaction

Hyperbranched polystyrenes (PS) were prepared by living radical photopolymerization of 4‐vinylbenzyl N,N‐diethyldithiocarbamate as an inimer under UV irradiation. The star‐hyperbranched copolymers were derived by grafting from surface N,N‐diethyldithiocarbamate groups of hyperbranched macroinitiator with t‐butyl methacrylate in the presence of N,N‐tetraethylthiuram disulfide. We obtained poly(methacrylic acid) star‐hyperbranched PS nanospheres by hydrolysis of poly(t‐butyl methacrylate)‐grafted chains. We established two‐dimensional (2D) regular nanopatterning by aligning continuously such nanospheres on poly(2‐vinylpyridine) (P2VP) lamellar layers of PS‐block‐P2VP diblock copolymer film. Electrostatic interaction between nanosphere surface having negative charges (? COOCs) and P2VP lamellar layer acted effectively for the 2D nanopattern formation. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4206–4210, 2006     

Synthesis of polypropylene graft copolymers from a hydroxyl‐groups‐containing polypropylene precursor via atom‐transfer radical polymerization

Isotactic polypropylene graft copolymers, isotactic[polypropylene‐graft‐poly(methyl methacrylate)] (i‐PP‐g‐PMMA) and isotactic[polypropylene‐graft‐polystyrene] (i‐PP‐g‐PS), were prepared by atom‐transfer radical polymerization (ATRP) using a 2‐bromopropionic ester macro‐initiator from functional polypropylene‐containing hydroxyl groups. This kind of functionalized propylene can be obtained by copolymerization of propylene and borane monomer using isospecific MgCl₂‐supported TiCl₄ as catalyst. Both the graft density and the molecular weights of i‐PP‐based graft copolymers were controlled by changing the hydroxyl group contents of functionalized polypropylene and the amount of monomer used in the grafting reaction. The effect of i‐PP‐g‐PS graft copolymer on PP‐PS blends and that of i‐PP‐g‐PMMA graft copolymer on PP‐PMMA blends were studied by scanning electron microscopy. Copyright © 2006 Society of Chemical Industry     

Self‐complementary multiple hydrogen bonding interactions increase the glass transition temperatures to supramolecular poly(methyl methacrylate) copolymers

We have prepared a series of poly(methyl methacrylate) (PMMA)‐based copolymers through free radical copolymerization of methyl methacrylate in the presence of 2‐ureido‐4[1H]‐pyrimidinone methyl methacrylate (UPyMA). The glass transition temperature was increased with the increase of UPyMA contents in PMMA copolymers due to strong self‐complementary multiple hydrogen bonding interactions of UPy moiety. The Fourier transform infrared and solid‐state NMR spectroscopic analyses provided positive evidence for the presence of multiple hydrogen bonds interaction of UPy moiety. Furthermore, the proton spin‐lattice relaxation time in the rotating frame [T_1ρ(H)] for the PMMA copolymers had a single value that was less than pure PMMA, indicating the smaller domain sizes in PMMA copolymers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of methyl methacrylate/styrene hyperbranched copolymers via living radical mechanism

Free‐radical copolymerizations of N,N‐diethylaminodithiocarbamoylmethylstyrene (inimer: DTCS) with a methyl methacrylate (MMA)/zinc chloride (ZnCl₂) complex were carried out under UV light irradiation. DTCS monomers play an important role in this copolymerization system as an inimer that is capable of initiating living radical polymerization of the vinyl group. The reactivity ratios (r₁ = 0.56 and r₂ = 0.52: DTCS [M₁]; MMA [M₂]) obtained for this copolymerization system were different from a corresponding model system (alternating copolymer) of a styrene and MMA/ZnCl₂ complex (r₁ = 0.25 and r₂ = 0.056). It was found that the hyperbranched copolymers produced exhibited a random branching structure. It was found that the Lewis acid ZnCl₂ formed the complex not only with MMA but also with the carbamate group of inimer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2490–2495, 2003     

Toughening modification of PS with n‐BA/MMA/styrene core–shell structured copolymer from emulsifier‐free emulsion polymerization

Core–shell structured particles, which comprise the rubbery core and glassy layers, were prepared by emulsifier‐free emulsion polymerization of poly(n‐butyl acrylate/methyl methacrylate)/polystyrene [P(n‐BA/MMA)/PS]. The particle diameter was about 0.22 μm, and the rubbery core was uncrosslinked and lightly crosslinked, respectively. The smaller core–shell structured particle–toughened PS blends were investigated in detail. The dynamic mechanical behavior and observation by scanning electron microscopy of the modified blend system with core–shell structured particles indicated good compatibility between PS and the particles, which is the necessary qualification for an effective toughening modifier. Notched‐impact strength and related mechanical properties were measured for further evaluation of the toughening efficiency. The notched‐impact strength of the toughened PS blends with uncrosslinked particles reached almost sixfold higher than that of the untoughened PS when 15 phr of the core–shell structured particles was added. For the crosslinked particles the toughening effect for PS was not obvious. The toughening mechanism for these smaller particles also is discussed in this article. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1290–1297, 2003     

Synthesis of functional polyisobutene I. Copolymerization of isobutene with 4-vinylbenzyl N,N-diethyldithiocarbamate

Summary A special monomer 4-vinylbenzyl N,N-diethyldithiocarbamate (VBDC) was synthesized firstly, and then the cationic copolymerization of VBDC with isobutene was investigated. The results of ¹H-NMR, EA and GPC (with UV detector) indicated that VBDC could copolymerize with isobutene and form the copolymer, and the units of VBDC incorporated into copolymer chains increased with the increasing of the feed ratio of VBDC. However, there has apparent discrepancy between the VBDC in the monomer feed and the VBDC incorporated into the copolymer chain, which is probably due to the relatively lower reactivity of VBDC. In the presence of VBDC, the MWD is narrower than that of in absence of VBDC under the similar experimental conditions. For cumyl methyl ether/TiCl₄ initiating system, the M_w/M_n could be slightly narrowed from 1.55 (no VBDC) to 1.33 (with VBDC) in the mixed solvents of n-hexane and CH₃Cl (15/10,V/V), while cumyl chloride /TiCl₄ initiating system, the M_w/M_n is narrowed from about 5.0 (no VBDC) to about 1.5 (with VBDC) with n-hexane and CH₂Cl₂ (10/10,V/V) as the mixed solvents. When benzyl N, N-diethyldithiocarbamate (BDC) was used as the model compounds instead of the VBDC, the similar results of M_w/M_n were obtained. These results demonstrated that the VBDC functions as the monomer electron donor (ED) in this polymerization system. Received: 23 August 2001/Revised version: 29 October 2001/ Accepted: 2 November 2001     

Silica/polystyrene and silica/polystyrene‐b‐polymethacryloxypropyltrimethoxysilane hybrid nanoparticles via surface‐initiated ATRP and comparison of their wettabilities

Both silica/polystyrene (SiO₂/PS) and silica/polystyrene‐b‐polymethacryloxypropyltrimethoxysilane (SiO₂/PS‐b‐PMPTS) hybrid nanoparticles were synthesized via surface‐initiated atom transfer radical polymerization (SI‐ATRP) from SiO₂ nanoparticles. The growths of all polymers via ATRP from the SiO₂ surfaces were well controlled as demonstrated by the macromolecular characteristics of the grafted chains. Their wettabilities were measured and compared by water contact angle (WCA) and surface roughness. The results show that the nanoparticles possess hydrophobic surface properties. The static WCA of SiO₂/PS‐b‐PMPTS hybrid nanoparticles is smaller than that of SiO₂/PS hybrid nanoparticles, meanwhile, the surface roughness of SiO₂/PS‐b‐PMPTS hybrid nanoparticles is yet slightly rougher than that of SiO₂/PS hybrid nanoparticles, which shows that the combination and competition of surface chemistry and roughness of a solid material can finally determine its wettability. POLYM. ENG. SCI., 2011. © 2010 Society of Plastics Engineers     

Synthesis,characterization, and properties of polystyrene/SiO2 hybrid materials via sol–gel process

Isocyanate‐functionalized polystyrene (P(St‐co‐TMI)) was successfully synthesized by solution free radical polymerization, which was then used to react with (3‐aminopropyl) triethoxysilane (APTES) to prepare a precursor of polystyrene/inorganic composites (PS/SiO₂). To obtain PS/SiO₂ composites with chemical bond, the precursor was mixed with triethoxysilane (TEOS) under the sol–gel reaction condition. The chemical bond between the PS and SiO₂ particles made the crosslink network more stable and avoided aggregation compared with the physical connection and barely mechanical mixing. The Fourier transform infrared (FT‐IR) results indicate that the isocyanate group ( NCO) was completely reacted with APTES. The field‐emission scanning electron microscopy results show that the morphology of composites and the distribution of the particles, which exhibit good compatibility between organic and inorganic phases, and the inorganic particles show good spatial uniformity. The differential scanning calorimetry shows that the glass transition temperature (T_g) of the PS/SiO₂ composites was shifted to high temperature when the amount of APTES increased. The thermal degradation temperature of the PS/SiO₂ composites increases with the increasing of APTES content. Master curves at 200°C are constructed for the storage and loss modulus as well as complex viscosity. POLYM. COMPOS. 36:482–488, 2015. © 2014 Society of Plastics Engineers     

Nano‐SiO2/PMMA‐PU composite particles with core‐shell structure via emulsion polymerization and their application in epoxy resin

A novel method of nano‐SiO₂/poly(methyl methacrylate)(PMMA)‐polyurethane(PU) composite particles modifying epoxy resin is reported. The composite particles with the obvious core‐shell structure were prepared by emulsion polymerization of PMMA and PU prepolymer on the surface of nano‐SiO₂. The diameter of the composite particles was 50–100 nm with dark core SiO₂ (30–60 nm) and light shell polymer of PMMA and PU (20–30 nm); moreover, PU was well distributed in PMMA with about 10 nm diameter. After nano‐SiO₂ was encapsulated by PMMA and PU, the Si content on the surface decreased rapidly to 2.08% and the N content introduced by PU was about 1.27%. The ratio of polymer to original nano‐SiO₂ (f_p), the grafting ratio of polymer to original nano‐SiO₂ (f_r) and the efficiency grafting ratio of polymer (f_e) were, respectively, about 116.7%, 104.4%, and 89.5%. The as‐prepared composite particles were an effective toughness agent to modify epoxy resin, and the impact strength of the modified epoxy resin increased to 46.64 kJ m^?2 from 19.12 kJ m^?2 of the neat epoxy resin. This research may enrich the field of inorganic nanoparticles with important advances toward the modification for polymer composite materials. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41919.     

Synthesis of graft copolymers from a linear polyolefin through a combination of coordination polymerization and atom transfer radical polymerization

This article reports on a facile route for the preparation of methyl acrylate and methyl methacrylate graft copolymers via a combination of catalytic olefin copolymerization and atom transfer radical polymerization (ATRP). The chemistry first involved a transforming process from ethylene/allylbenzene copolymers to a polyolefin multifunctional macroinitiator with pendant sulfonyl chloride groups. The key to the success of the graft copolymerization was ascribed to a fast exchange rate between the dormant species and active radical species by optimization of the various experimental parameters. Polyolefin‐g‐poly(methyl methacrylate) and polyolefin‐g‐poly(methyl acrylate) graft copolymers with controlled architecture and various graft lengths were, thus, successfully prepared under dilute ATRP conditions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation,morphology, and mechanical properties of elastomers based on polydimethylsiloxane/ polystyrene blends

Polydimethylsiloxane/polystyrene (PDMS/PS) blends were prepared by radical copolymerization of styrene (St) and divinylbenzene (DVB) in the presence of α,ω‐dihydroxy‐polydimethylsiloxane (PDMS), using benzoyl peroxide as initiator. The PDMS/PS blends obtained by this method are a series of stable, white gums, when the feed ratio of PDMS to St is 60/40 and DVB to St is not more than 2.0 wt %. Elastomers based on PDMS/PS blends were formed by crosslinking PDMS with methyl‐triethoxysilicane (MTES). The MTES dosage was much larger than the amount necessary for end‐linking hydroxy‐terminated chains of PDMS, with the excess being hydrolyzed to crosslinked networks, which were similar to SiO₂ and acted as filler. Mechanical property measurements show that the elastomers thus formed exhibit superior mechanical properties with respect to pure PDMS elastomer and the elastomers based on PDMS/PS system we prepared before. Moreover, investigations were carried out on the elastomers by extraction measurement and scanning electron microscopy (SEM). The extraction data show that the sol‐fraction decreases with increasing the feed ratio of DVB to St. SEM observation demonstrates that the elastomer has a microphase‐separated structure consisting of dispersed PS domains within a continuous PDMS matrix, and the extracted material exhibits a porous structure. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Surface‐initiated atom transfer radical polymerization from Mg(OH)2 nanoparticles to prepare the well‐defined polymer‐Mg(OH)2 nanocomposites

Well‐defined polymer‐Mg(OH)₂ nanocomposites were prepared by atom transfer radical polymerization (ATRP). The ATRP initiators were covalently attached to the Mg(OH)₂ by esterification of 2‐chloropropionyl chloride with hydroxyl group. The amount of polymer grafted from Mg(OH)₂ can be controlled using a different catalyst system and adding a small amount of polar solvent. The well‐defined diblock copolymer, consisting of poly(styrene) (PS) and poly(methyl methacrylate) (PMMA) were synthesized. The products were characterized by nuclear magnetic resonance, Fourier transform infrared, differential scanning calorimetry, and thermal gravimetric analysis. The morphologies of PS/PMMA and PS/PMMA/Mg(OH)₂‐g‐PS‐b‐PMMA blends are compared by using a scanning electron microscope. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3680–3687, 2007     

Preparation and properties of core–shell nanosilica/poly(methyl methacrylate–butyl acrylate–2,2,2‐trifluoroethyl methacrylate) latex

A core–shell nanosilica (nano‐SiO₂)/fluorinated acrylic copolymer latex, where nano‐SiO₂ served as the core and a copolymer of butyl acrylate, methyl methacrylate, and 2,2,2‐trifluoroethyl methacrylate (TFEMA) served as the shell, was synthesized in this study by seed emulsion polymerization. The compatibility between the core and shell was enhanced by the introduction of vinyl trimethoxysilane on the surface of nano‐SiO₂. The morphology and particle size of the nano‐SiO₂/poly(methyl methacrylate–butyl acrylate–2,2,2‐trifluoroethyl methacrylate) [P(MMA–BA–TFEMA)] core–shell latex were characterized by transmission electron microscopy. The properties and surface energy of films formed by the nano‐SiO₂/P(MMA–BA–TFEMA) latex were analyzed by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, scanning electron microscopy/energy‐dispersive X‐ray spectroscopy, and static contact angle measurement. The analyzed results indicate that the nano‐SiO₂/P(MMA–BA–TFEMA) latex presented uniform spherical core–shell particles about 45 nm in diameter. Favorable characteristics in the latex film and the lowest surface energy were obtained with 30 wt % TFEMA; this was due to the optimal migration of fluorine to the surface during film formation. The mechanical properties of the films were significantly improved by 1.0–1.5 wt % modified nano‐SiO₂. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011