共查询到20条相似文献,搜索用时 62 毫秒
1.
针对车载移动式大型制氮设备空间布置紧凑、检查和维护设备不便的问题,采用集中控制的方式。开发了在线监测与控制系统。该系统操作方便、运行稳定、性能可靠,已在生产中发挥了重要作用,其监控功能为设备的维护、检修、零部件更换提供了技术依据,提高了生产效率,发挥了设备应有的能力。 相似文献
2.
吴华伦 《世界制造技术与装备市场》2002,(1):18-19
目前,在各个机械加工领域,数控机床的应用已极为广泛。在复杂形面加工、提高加工精度和提高生产效率方面,发挥了重要作用。然而,人们在选用数控加工设备时,有时会由于缺乏某些专业知识或缺少经验,出现了选用不当或者购买的数控机床没有发挥应有作用的现象。为尽量避免这种情况的发生,少走弯路,现仅就数控铣镗加工设备的选用事宜谈几点意见,供大家参考。 相似文献
3.
随着我国科技的不断发展,工程建设不断增多,机械化设备的应用也越来越广泛,机械化设备的应用大大加快了工程建设速度,同时建筑的质量也有较大提高。虽然机械化的生产优点较多,但是在实际的建设过程中也受到不少的因素的影响,对于机械设备的性能发挥有阻碍的作用,降低了机械化作业速度,因此建筑单位要想充分的发挥出机械的优越性,需要做好工程机械设备的管理和维护工作,只有搞好了机械设备的管理和维护才能使得这些设备发挥出应有的作用。要想解决这个问题,需要充分的考虑在进行管理中的各个环节的联系。努力做好工程机械设备的管理和保养工作对于企业的发展、增强企业的市场竞争力都有着十分重要的作用。 相似文献
4.
变频器,节能的重要设备,越来越得到广泛的应用,普传科技,一家专业设计生产变频器的供应商,在能源紧张的今天,在节能方面发挥着企业应有的作用,为此,本刊记者采访了大连普传科技股份有限公司及深圳市普传科技有限公司总经理张海杰先生。 相似文献
5.
6.
针对CA6140普通车床电气控制系统进行数控化改造,使其在实践教学中发挥重要作用,能作为普通车床教学使用,又可当数控车床教学使用,还能作为专业课程实习、实训配套设备,提高了设备利用率,优化了实践教学内容,为培养高素质人才提供了创新平台. 相似文献
7.
机电类实训教学中,通常利用模拟教学实训设备开展教学,而设备上的电机通常在空载、轻载状态运行,导致教学实训装置无法真实再现生产现场电动机的运行工况。本装置与现有自动生产线教学实训装置相结合,将生产现场采集的电动机工况,通过磁滞制动器将载荷加载在电动机轴上,使学生能快速掌握现场生产工艺,并按照工艺要求,正确设置现有实训装置无法模拟的控制参数,提高机电类高技能人才的培养水平,对提高教学质量具有重要意义。 相似文献
8.
9.
10.
设备管理是机械工业企业的重要组成部分。在大力发展生产力的今天,作为企业物资技术基础的设备,它对企业的生存和发展起着举足轻重的作用,要想使技术先进的装备发挥应有的功能,必须首先管好、用好、修好设备。产品的技术进步与装备的技术进步是相辅相承的,随着设备向机电一体化方向发展,对企业生产经营活动的影响越来越大,设备管理工作就要适应形势的需要,逐步加强。 相似文献
11.
12.
F. Pettinari A. Couret D. Caillard G. Molénat N. Clément & A. Coujou 《Journal of microscopy》2001,203(1):47-56
Several examples of recent studies by in situ straining experiments in a transmission electron microscope performed in the Toulouse group (France) are presented. In particular, quantitative measurements of the features of the dislocation motion are described. These examples deal with individual or collective propagation of dislocations, which are submitted to various types of obstacle. Different metallic materials are investigated: magnesium, intermetallics, aluminium alloys and γ phase of a superalloy. 相似文献
13.
赵霞 《机械工业标准化与质量》2010,(8):19-20
<正>"中国制造"成为了眼下一大热门话题。近期相关媒体采访了几位我国著名的品牌问题研究专家,聆听专家们对我国目前品牌产品发展现状和未来发展的看法与建议。本刊将专家的观点经整理提供给大家,希望能对企业有所帮助。 相似文献
14.
《Journal of Mechanical Working Technology》1977,1(1):3-34
The technology of the rolling of sections has made great progress in Japan in the last 7 decades, and in the 15-year period since the introduction of universal mills development of the technology has been quite striking. Starting with the changes in mill layout, this progress is briefly discussed, and the technology that has brought about the development is described at length. Reference is made to the extension of universal rolling to the rolling of general sections, to the realization of computer control of the rolling of wide-flange beams and of full continuous rolling, to the automation of finishing operations, and, further, to energy-saving measures, which are the subject of major current interest.Lastly, the outlook for section rolling in the years ahead is considered on the basis of manufacturing facilities, manufacturing processes and demand trends, thus clearly indicating the direction in which the technology of section rolling is likely to proceed. 相似文献
15.
Akira Azushima 《Tribology International》1987,20(6):316-321
Research into, and the state of technology for, lubrication in steel strip rolling in Japan are reviewed. Both cold and hot strip rolling are discussed. Subjects covered include coefficient of friction and oil film thickness, friction pick-up, and roll wear. 相似文献
16.
17.
《橡塑机械时代》2009,21(5):9-9
On February 17-19, Qingdao Soft-control took part in the 34th international rubber tire machinery exhibition and the international awards of the new technologies of tire in Humbury, Germany. This is the largest rubber tire machinery exhibition, which held once every year by the international rubber tire technology magazine organization with high authority. 相似文献
18.
The micro in the word of microtribology is defined as science and engineering supported by modern physics and chemistry. In the engineering area, the ultimate goal of microtribology is to create practical zero-wear devices. The importance of microtribology was recognized by Japanese scientists and engineers in the latter half of the 1980s, and much progress has been made in microtribological studies of mechanisms of friction, lubrication with very thin liquid films, and microwear processes. 相似文献
19.
20.
尚项绳 《机械工业标准化与质量》2009,(7):11-13,17
我国的拖拉机生产从20世纪50年代后期引进国外样机开始。经历了前期仿制、自行研制、技术引进和自主开发几个阶段。拖拉机标准也随之蓬勃发展。经过50多年的发展,我国拖拉机行业已形成以全国拖拉机标准化技术委员会为基本活动单元的行业标准化工作体系。目前我国有关拖拉机的各类标准总计210项。其中国家标准114项,机械行业标准93项。其他行业标准三项。在与拖拉机有关的88项国际标准中。修改或等同采用国际标准及国外先进标准58项。国际标准的转化率达65.9%。本期,我们特邀全国拖拉机标准化技术委员会秘书长尚项绳、中国农业机械学会拖拉机学会陈英超、江苏常发集团农业装备公司品质部长廖汉平、常州东风农机集团有限公司质量总师苏东林对拖拉机行业及标准发展.以及企业自身建设做详细介绍。 相似文献