Checking contact angles of radial-thrust bearings

Summary On the basis of the above method of measurement, using expression (4), highly productive semiautomatic devices were made for sorting out bearings by their contact angles into three groups: small, good and large.The adoption by our industry of these measuring devices for checking the contact angles will raise considerably the quality and life of radial-thrust bearings.     

Ultrasonic study of the temperature and pressure dependences of the elastic properties of a single-crystal Heusler structure Cu41Mn20Al39 alloy

Pulse-echo-overlap measurements of ultrasonic wave velocity have been used to determine the elastic-stiffness tensor components Cu and the adiabatic bulk modulus, BS, of a ferromagnetic Heusler structure Cu41Mn20Al39 at % alloy single crystal as functions of temperature in the range 14–300 K and hydrostatic pressure up to 0.2 GPa at room temperature. At 295 K the elastic stiffnesses are: C11=133 GPa, C44=92 GPa, C (=(C11–C12)/2)=17 GPa, C12=99 GPa, CL(=C11+C44–C)=205 GPa, and BS (=C11–4C/3)=106 GPa. Cu41Mn20Al39 is a comparatively soft material elastically because its elastic properties are influenced strongly by magnetoelastic effects. The results of measurements of the effects of hydrostatic pressure on the ultrasonic wave velocity have been used to obtain the hydrostatic-pressure derivatives of the elastic – stiffness tensor components. At 295 K (C11/P)P=0, (C44/P)P=0, (C/P)P=0, (C12/P)P=0, (CL/P)P=0, and (BS/P)P=0 are 5.0±0.1, 3.0±0.1, 1.0±0.2, 3.0±0.3, 7.7±0.4 and 3.7±0.4, respectively. Application of hydrostatic pressure does not induce acoustic-mode softening: the pressure derivatives (CIJ/P)P=0 and (BS/P)P=0 and the acoustic-mode Grüneisen parameters are positive. An interesting feature of the non-linear acoustic behaviour of this alloy is that the value obtained for (C/P)P=0, associated with the softer shear mode propagated along the [1 1 0] direction and polarized along the [1 1 0] direction, is small in comparison with those of the other shear and longitudinal modes. The Grüneisen parameter of this mode, and hence its vibrational anharmonicity, is much larger than those of the other long-wavelength acoustic phonon modes. © 1998 Kluwer Academic Publishers     

Spin hydrodynamic equations with external disturbances and suitable Green's functions for superfluid3He-B. New onsager relations

The spin hydrodynamic equations for superfluid³He-B have been obtained for the case of external, time-dependent fields. On the basis of a microscopic approach, expressions are found for additional terms in equations containing these fields. Considering the linear response of the system to the switching on of external fields, formulas are found for suitable Green's functions (magnetization-magnetization, rotation-rotation, magnetization-rotation, rotation-magnetization). The rotation-rotation Green's function has the 1/q ² singularity characteristic of superfluid systems. Connections between Green's functions lead to relations among kinetic coefficients v, ₁, and ₂. It is also shown that there is a conserved quantityQ ^(B) = div v _s ^(B) that describes sources or magnetic type charges (monopoles) of the superfluid velocity v _s ^(B) . Comparison with the phenomenological approach suggests thatQ ^(B) is proportional to a pseudoscalar giving the projection of the spin density onto the vector describing the axis of rotation.     

Some simple flows of a Johnson-Segalman fluid

Summary Unlike most other fluid models, the Johnson-Segalman fluid allows for a non-monotonic relationship between the shear stress and rate of shear in a simple shear flow for certain values of the material parameter. This has been used for explaining a phenomenon such as spurt. Here, we study three simple flows of a Johnson-Segalman fluid with a view towards understanding its response characteristics. We find that boundary conditions can have a very interesting effect on the regularity of the solution; changing them continuously leads to solutions that change their regularity. First, we consider the flow through a circular pipe and find solutions that have discontinuous velocity profiles which have been used to explain the phenomenon of spurt (cf. [10], [11]). Second, we consider the flow past an infinite porous plate and show that it will not admit solutions which have discontinuous velocity gradients, the solutions being necessarity smooth. Lastly, we study Poiseuille flow in a concentric annulus with porous boundaries. While spurt could be explained alternatively by allowing for stick-slip at the wall, the Johnson-Segalman model seems particularly suited in describing the appearance of shear-layers (cf. [13]).     

The stacked lamellar texture on the fracture surfaces of fibre composites

A fracture surface texture, which has been variously termed as lacerations, hackles or serrations, is often observed on the matrix surface of fibre composites, most often in resin-rich regions. This texture, referred to here as a stacked lamellar texture to emphasize its plate-like nature, was studied in an E-glass/epoxy composite. Scanning electron fractographs of these materials suggest that the stacked lamellar texture arises from crack fingers due to a meniscus instability mechanism interacting with a reorienting stress field.     

Corrosion of Aircraft Structures Made of Aluminum Alloys

We analyze corrosion damages of the airframe load-bearing unit, made of aluminum alloys, of Antonov airplanes for 20–40 year of operation. We describe some examples of corrosion manifestations, its kinds, and ways of removal. The applicability of a series of aluminum alloys in Antonov airplanes is considered with regard for the influence of corrosion factor.     

The effect of Si,Zr, Al and Mo on the structure and strength of Ti martensite

The structure and strength of martensite in near titanium alloys have been studied in the composition range (wt %) up to 10% Zr, 6%, Al, 1/2% Mo, 2.4% Si. [0001], 1/3 11¯20 dislocations, 1/3 10¯10 stacking faults and approximately {10¯11} twin related martensite plates are found to be common features of the martensite. Martensite midribs consist either of finely transformed material between martensite plates, or regions of low dislocation density within martensite plates.The martensite morphology is related to the alloy composition, changing from massive to plate-like with increasing solute content. The strength of the martensite is controlled largely by solid solution strengthening.     

Evidence for collective excitations in superconducting tin whiskers

Based on the assumption that a phase-slip center in a clean quasi-one-dimensional superconductor excites a collective oscillation, the time-averaged value of the electrochemical potential of quasiparticles is calculated. At larger distances from the phase-slip center, swings below (or above) the electrochemical potential _p of the Cooper pairs. This makes it possible to understand the unexpected results of previous measurements.     

Phase decomposition of liquid-quenched β-type Ti-Cr alloys

Phase decomposition behaviour of liquid-quenched (bcc) type Ti-Cr alloys was investigated by means of transmission electron microscopy and hardness measurements. It was found that decomposition of to ₁ (Ti-rich, bcc) + ₂ (Ti-lean, bcc) takes place in the intermediate composition range of the Ti-Cr system. This experimental result proves the theoretical prediction made by Menon and Aaronson, but the observed ₁ + ₂ two-phase field expands towards higher temperatures than the predicted binodal line. The coherent ₁ + ₂ two-phase state exhibits the so-called 100 modulated structure and it was concluded that the formation of such a structure is a result of spinodal decomposition of the -phase. We obtained time-temperature-transformation (TTT) diagrams of -type Ti-30, 40 and 50 at % Cr alloys. A typical sequence of structural change is coherent ₁ + ₂ incoherent ₁ + ₂ incoherent ₁ + ₂ + grain boundary precipitates stable state of + TiCr₂ or + TiCr₂. Not all the states in the above sequence appear, depending on alloy composition, liquid-quenching rate and ageing temperature.     

Theoretical estimation of the effect of interfacial energy on the mechanical strength of spinodally decomposed alloys

New interfaces are produced on the slip plane when a crystal with continuous composition fluctuation arising from spinodal decomposition is deformed by slip. In this work, the energy of such interfaces is evaluated for both modulated and mottled structures, and their effects on slip behaviour are discussed. It is concluded that the contribution of this interfacial energy is large enough to account for the age-hardening concomitant with spinodal decomposition.     

The size of “secondary” droplets when a liquid is atomized by a rotating disc

We investigate the second regime of liquid atomization by means of a rotating disc, with this regime characterized by the formation of droplets of uniform size. It is this phenomenon that is of interest for engineering processes. Formulas suitable for practical calculations are proposed.Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 17, No. 1, pp. 13–18, July, 1969.     

Novel poly(etheraroyl-co-terephthal) hydrazides with liquid crystalline behaviour

Novel poly(etheraroyl-co-terephthal)hydrazides with liquid crystalline (LC) behaviour, synthesized by solution polycondensation followed by non-solvent coagulation in water, have been characterized by means of Fourier Transform infrared (FT-i.r.), differential scanning calorimetry (DSC) and wide angle X-ray scattering (WAXS) techniques. DSC thermograms and WAXS intensity profiles of as polymerized and coagulated homo- and copolymers are strongly dependent upon the molecular structure and constitution of the polymers: the poly(etheraroyl-hydrazide) homopolymer shows an LC behaviour and such a characteristic is maintained in copolymers with low content of terephthaloyldichloride comonomer, while a further increase in comonomer content attenuates this LC attitude. Annealing treatments on as polymerized and coagulated copolymers are able to transform the LC phase metastable at room temperature into crystalline and/or amorphous phases.     

Angular variation of coercivity of interacting fine acicular skeleton particles

For fine, acicular skeleton particles of -Fe prepared from -FeOOH, the effect of interparticle interaction on the angular variation ofH _c was numerically investigated using a direct expansion scheme of the chain-of-spheres fanning model to an interacting chain system forming an orthorhombic type of regular space lattice. The model theory reveals that only magnetostatic lateral interchain interaction can affect the angular variation ofH _c. The results have been used to explain the experimentally observed effects of particle morphology and packing fraction on the angular variation ofH _c in systems made from fine acicular particles prepared for audio/video magnetic recording media. It is suggested that a local aggregate of the so-called multiple type, is unavoidably generated in the system.     

On the “scientometric decline” of British science. One additional graph in reply to Ben Martin

With respect to the issue of whether the scientometric measurement of the decline of British science is an artifact of the specific database and underlying assumptions in methods, I argue that there are fewer analytical objections against measurement by usingSciSearch Online than against other methods (based on the fixed journal set and fractional counting). The measurement of international co-authorship, i.e. a network indicator, should not be confounded with measurement of performance of a single nation. The time series for the different subsets of UK-publications, which have been proposed, are given. None of the indicators can be shown to exhibit a trend (in contrast to a drift). The hypothesis of a decline has therefore to be rejected.     

Modern Problems of Intensification of Heat Exchange in Channels

The current achievements in the field of intensification of heat exchange in tube heatexchange apparatus are considered. Requirements for highefficiency heattransfer surfaces have been formulated. Problems of intensification of heat exchange in bundles of finned tubes and in heatexchange apparatus under conditions of condensation and boiling of heattransfer agents and under scaling conditions have been investigated. Highefficiency designs of heatexchange apparatus are presented.     

Two shift theorems leading to lower bounds to eigenvalues

Summary Two theorems are proved by which the other bound can be obtained from the Rayleigh quotient, i.e., the bound which cannot be obtained by the Rayleigh-Ritz method.The method presented here utilizes a shift operation which is the redistribution of weight functions in the Rayleigh quotient.     

The role of starting powder size on the compressive response of stand-alone plasma-sprayed alumina coatings

Cylindrical stand-alone tubes of plasma-sprayed alumina were tested in uniaxial compression at room temperature, using strain gages to monitor axial strains. The effect of lamella size on the mechanical response was investigated by employing different starting powders to fabricate samples. The average powder sizes investigated included 9 m, 19 m and 32 m alumina; the resulting effective lamella diameters were 10 m, 28 m, and 55 m, respectively. Similar stress-strain hysteresis was observed on unloading in all tubes, independent of lamella size. A strong correlation between the failure stress and the cumulative strain at failure was also observed for tubes fabricated from the three powders. For samples with approximately constant densities, tubes plasma sprayed with the 9 m powder exhibited greater moduli than tubes sprayed from either 19 or 32 m powders. This difference was attributed to the greater percentage of unmelted -Al₂O₃ in the coating.     

Interfacial and mechanical properties of environment-friendly “green” composites made from pineapple fibers and poly(hydroxybutyrate-co-valerate) resin

Physical and tensile properties of pineapple fibers were characterized. Tensile properties of pineapple fibers, like most natural fibers, showed a large variation. The average interfacial shear strength between the pineapple fiber and poly(hydroxybutyrate-co-valerate) (PHBV) was 8.23 MPa as measured by the microbond technique. Scanning electron microscopy (SEM) photomicrographs of the microbond specimens revealed an adhesive failure of the interface. Fully degradable and environment-friendly green composites were prepared by combining pineapple fibers and PHBV with 20 and 30% weight content of fibers placed in a 0°/90°/0° fiber arrangement. Tensile and flexural properties of these green composites were compared with different types of wood specimens. Even though tensile and flexural strength and moduli of these green composites were lower than those of some wood specimens tested in grain direction, they were significantly higher than those of wood specimens tested in perpendicular to grain direction. Compared to PHBV virgin resin, both tensile and flexural strength and moduli of these green composites were significantly higher. SEM photomicrographs of the fracture surface of the green composites, in tensile mode, showed partial fiber pull-out indicating weak bonding between the fiber and the matrix.     

Where Are We in HTCS?

Address given at the closing of the conference on Major Trends in Superconductivity in the New Millennium, MTSC 2000 and the opening of the Symposium on Itinerant and Localized States in HTCS SILS in HTCS.     

Fatigue crack growth behaviour of tungsten carbide-cobalt hardmetals

Fatigue crack propagation studies have been carried out on a range of WC-Co hardmetals of varying cobalt content and grain size using a constant-stress intensity factor double torsion test specimen geometry. Results have confirmed the marked influence of mean stress (throughK _max), which is interpreted in terms of static modes of fracture occurring in conjunction with a true fatigue process, the existence of which can be rationalized through the absence of any frequency effect. Dramatic increases in fatigue crack growth rate are found asK _max approaches that value of stress intensity factor ( 0.9K_IC) for which static crack growth under monotonic load (or static fatigue) occurs in these materials. Lower crack growth rates, however, produce fractographic features indistinguishable from those resulting from fast fracture. These observations, and the important effect of increasing mean free path of the cobalt binder in reducing fatigue crack growth rate, can reasonably be explained through a consideration of the mechanism of fatigue crack advance through ligament rupture of the cobalt binder at the tip of a propagating crack.