Complete removal of pathogenic bacteria from drinking water using nano silver-coated cylindrical polypropylene filters

An attempt was made to investigate the removal of Escherichia coli bacteria from drinking water using nano silver-coated polypropylene water filter. For the production of nano silver filters, a modified Balzers 760 machine equipped with an electron beam gun was used. The nano-silver particles were made by electron beam bombardment of the silver metal, which were subsequently deposited on the polypropylene filters evenly. The thickness of the nano layer coated on the filters was 35.0 nm. The nano silver-coated filters were characterized using scanning electron microscopy, X-ray diffraction, transmission electron microscopy, and atomic force microscopy. The antibacterial efficiency of the filters was evaluated using the membrane filter method. At a flow rate of 3 l/h, the output count of E. coli was zero after 7 h filtration when the input water had a bacterial load of 10³ colony-forming units (cfu) per milliliter. The inductively coupled plasma/mass spectrometry (ICP/MS) results showed that the 35 nm layer of the silver nanoparticles were stable on the water filter and were not washed away by water flow even after 72 h.     

Fabrication of silver nanocomposite films impregnated with curcumin for superior antibacterial applications

Silver nanocomposite films are found to be very effective material for anti-bacterial application. In the present work, sodium carboxylmethyl cellulose silver nanocomposite films (SCMC SNCF) were tried for antibacterial applications. To enhance their applicability novel film-silver nanoparticle-curcumin composites have been developed. SCMC SNCF are developed from sodium carboxylmethyl cellulose (SCMC), N,N ¹ -methylenebisacrylamide (MBA) and silver nitrate solution. These films were characterized by FTIR, UV–visible, XRD, TGA, DSC and TEM techniques. The formed silver nanoparticles have an average particle size of ~15 nm as observed by transmission electron microscopy (TEM). Curcumin loading into SCMC SNCF is achieved by diffusion mechanism. The UV–Visible analysis indicated that higher encapsulation of curcumin in the films with higher SCMC content. Further, it was observed that the presence of silver nanoparticles in the films enhanced the encapsulation of curcumin indicating an interaction between them. Moreover, the antibacterial activity showed that the SCMC films generated with silver nanoparticles have a synergistic effect in the antimicrobial activity against Escherichia coli (E. coli). In order improve the healing efficacy as antibacterial agents, curcumin loaded with SCMC SNCFs were developed which showed significant inhibition of E. coli growth than the silver nanoparticles and curcumin alone film. Therefore, the present study clearly provides novel antimicrobial films which are potentially useful in preventing/treating infections.     

Studies on antimicrobial and wound healing applications of gauze coated with CHX–Ag hybrid NPs

In this study, chlorhexidine (CHX)–silver (Ag) hybrid nanoparticles (NPs) coated gauze was developed, and their bactericidal effect and in vivo wound healing capacities were tested. A new method was developed to synthesise the NPs, wherein Ag nitrate mixed with sodium (Na) metaphosphate and reduced using Na borohydride. Finally, CHX digluconate was added to form the hybrid NPs. To study the antibacterial efficacy of particles, the minimal inhibition concentration and biofilm degradation capacity against Gram‐positive and Gram‐negative bacteria was studied using Escherichia coli and Staphylococcus aureus. The results indicated that the NP inhibited biofilm formation and was bactericidal as well. The gauze was doped with NPs, and its wound healing property was evaluated using mice model. Results indicated that the wound healing process was fastened by using the NPs gauze doped with NPs without the administration of antibiotics.Inspec keywords: nanomedicine, nanoparticles, wounds, silver, cellular biophysics, biomedical materials, nanofabrication, microorganisms, antibacterial activityOther keywords: NPs gauze, antimicrobial wound healing applications, hybrid NPs, chlorhexidine–silver hybrid nanoparticles, CHX, coated gauze, bactericidal effect, minimal inhibition concentration, biofilm degradation capacity, Gram‐negative bacteria, wound healing property, wound healing process, in vivo wound healing capacities, Staphylococcus aureus, Escherichia coli, antibiotics administration, Na borohydride, Ag nitrate mixing, sodium metaphosphate, CHX digluconate, NP inhibited biofilm formation, Ag     

壳聚糖修饰银纳米颗粒的制备及抗菌性能研究

采用液相化学还原法,以壳聚糖为修饰剂,硼氢化钠为还原剂,制备了壳聚糖修饰银纳米颗粒(chitosan-Ag NPs)。通过X射线粉末衍射仪、透射电子显微镜、傅立叶变换红外光谱仪等对所制备样品的结构和形貌进行了表征。结果表明,所制备纳米颗粒具有面心立方Ag的晶型结构,壳聚糖通过氨基和羟基中的N、O原子与Ag+的化学键合作用修饰在纳米颗粒表面,起到了限制颗粒粒径长大和防止其团聚的作用。采用肉汤连续稀释法检测了样品对大肠杆菌和金黄色葡萄球菌的抑菌杀菌性能,结果表明chitosan-Ag NPs具有优异的抗菌性,抗菌性能受到粒径大小的影响。     

Synthesis of silver nanoparticles by chemical and biological methods and their antimicrobial properties

Biogenic synthesis of nanoparticles offers an attractive alternate to chemical synthesis methods. Various hazard free, eco-friendly methods of synthesis of silver nanoparticles are in operation. In chemical reduction methods, the reducing agent is a chemical solution, whereas in biological ones, the collection of enzymes, especially nitrate reductase, plays this role. The highest antibacterial activity of silver nanoparticles synthesised by chemical and biological methods was found in Staphylococcus aureus and Escherichia coli. The paper aims to discuss some fundamental issues about non-biological methods and benefits about biological methods for silver nanoparticles synthesis and their antibacterial studies.     

纳米银粒子在微乳液中的制备及其抗菌性能

在以二丁酸二异辛酯磺酸钠为表面活性剂、异辛烷为油相形成的W／O型微乳体系中,以AgNO3为银源、抗坏血酸为还原剂,讨论了AgNO3浓度、抗坏血酸浓度以及水核半径（W）对制备纳米银粒子的影响。利用紫外一可见光谱分析（UV-Vis）、透射电镜（TEM）和纳米粒度仪对制得的纳米银进行表征。结果表明,在AgNO3浓度为0．2mol／L,抗坏血酸浓度为0．2mol／L,W值为10的条件下,得到大小为10nm左右,单分散性好的均匀球状纳米银溶胶。抗菌性能测试表明,当纳米银粒子质量浓度为10μg／mL时,对大肠杆菌的杀菌率达98％以上。     

Ultrasonic Alloying of Preformed Gold and Silver Nanoparticles

Alloyed gold/silver nanoparticles with a core/shell structure are produced from preformed gold and silver nanoparticles during ultrasonic treatment at different intensities in water and in the presence of surface‐active species. Preformed gold nanoparticles with an average diameter of 15 ± 5 nm are prepared by the citrate reduction of chloroauric acid in water, and silver nanoparticles (38 ± 7 nm) are formed after reduction of silver nitrate by sodium borohydride. Bare binary gold/silver nanoparticles with a core/shell structure are formed in aqueous solution after 1 h of sonication at high ultrasonic intensity. Cationic‐surfactant‐coated preformed gold and silver nanoparticles become gold/silver‐alloy nanoparticles after 3 h of sonication in water at 55 W cm^?2, whereas only fusion of isolated gold and silver nanoparticles is observed after ultrasonic treatment in the presence of an anionic surfactant. As the X‐ray diffraction profile of alloyed gold/silver nanoparticles reveals split, shifted, and disappeared peaks, the face‐centered‐cubic crystalline structure of the binary nanoparticles is defect‐enriched by temperatures that can be as high as several thousand Kelvin inside the cavitation bubbles during ultrasonic treatment.     

Study on gelatin-silver nanoparticle composite towards the development of bio-based antimicrobial film

Nano-scale silver particle stabilized by gelatin protein was prepared through the reduction of aqueous silver nitrate solution by sodium borohydride. Gelatin concentration was varied against a fixed concentration of silver nitrate to optimize the gelatin to metal ratio. Gelatin-protected Ag-nanoparticle was characterized by UV-VIS spectroscopy and transmission electron microscopy (TEM). All the samples exhibited similar yellow color with a characteristic plasmonic band of silver nanoparticles at 412 nm. TEM micrographs also showed the presence of nanoscale silver particles of approximately 3.9 nm. Since silver has strong bactericidal properties and at the same time relatively less toxic to human cell, silver in various forms is ideally suited for a wide range of applications in consumer, industrial and medical products The antimicrobial properties of gelatin-silver nanocomposites were tested by 'cup-plate zone of inhibition' method. The nanocomposites exhibited significant antibacterial and antifungal activity.     

Synthesis of Starch-Stabilized Silver Nanoparticles and Their Antimicrobial Activity

In this study, silver nanoparticles were prepared using silver nitrate as the metal precursor, starch as protecting agent, and sodium borohydride (NaBH₄) as a reducing agent by the chemical reduction method. The formation of the silver nanoparticles was monitored using ultraviolet-visible absorption spectroscopy, cyclic voltammetry, and particle size analyzer and characterized by transmission electron microscopy (TEM) and x-ray diffraction (XRD). Synthesis of nanoparticles were carried out by varying different parameters, such as reaction temperature, concentration of reducing agent, concentration of silver ion in feed solution, type and concentration of the stabilizing agent, and stirrer speed expressed in terms of particle size and size distribution. Dispersion destabilization of colloidal nanoparticles was detected by Turbiscan. It was observed that size of the starch stabilized silver nanoparticles were lower than 10 nm. The microbial activity of synthesized silver nanoparticles was examined by modified Kirby-Bauer disk diffusion method. Silver nanoparticles were tested for their antibacterial activity against Gram negative bacteria such as Escherichia coli, Pseudomonas aeruginosa, and Gram positive bacteria such as Staphylococcus aureus and Staphylococcus epidermidis. High bacterial activity was observed at very low concentrations of silver (below 1.39 μg/ml). The antifungal activity of silver nanoparticles has been assayed against Candida albicans.     

Antibacterial coatings on haemodialysis catheters by photochemical deposition of silver nanoparticles

Antibacterial coatings on catheters for acute dialysis were obtained by an innovative and patented silver deposition technique based on the photo-reduction of the silver solution on the surface of catheter, with consequent formation of antibacterial silver nanoparticles. Aim of this work is the structural and morphological characterization of these medical devices in order to analyze the distribution and the size of clusters on the polymeric surface, and to verify the antibacterial capability of the devices treated by this technique against bacterial proliferation. The structure and morphology of the silver nanoparticles were investigated by using scanning and transmission electron microscopy. The antimicrobial capability of the catheters after silver deposition was confirmed by antibacterial tests with Escherichia coli. Both scanning electron microscopy analysis and antibacterial tests were performed also after washing catheters for 30 days in deionized water at 37°C, relating these data to thermogravimetric analysis and to energy dispersive spectroscopy, in order to check the resistance of coating and its antimicrobial capability after the maximum time of life of these devices.     

Controllable synthesis of fluorescent silver nanoparticles with different length oligonucleotides

Silver nanomaterials have become important research topics in recent years. As a new type of fluorescent material, silver nanomaterials have been applied to fluorescent sensors, bioimaging and materials targeting cancer cells. Here, an approach to the oligonucleotide‐templated controllable formation of fluorescent Ag nanomaterials is reported. In this experiment, silver nanoparticles (NPs) were synthesised from oligonucleotides chains, sodium borohydride (NaBH₄) and silver nitrate (AgNO₃) by changing the molar ratio of DNA to sodium borohydride (NaBH₄) and silver nitrate (AgNO₃). Fluorescent assay and transmission electron microscopy were used to characterise the silver NPs. The optimal selection of DNA chains with different lengths as templates for the synthesis of silver NPs was found. This work successfully develops the capping oligonucleotides scaffolds of silver nanoclusters.     

Synthesis of silver/silica nanocomposites anchored by polymer via in situ reduction

Silver/silica nanocomposites were synthesized by in situ reduction of silver salt and anchorage of the formed silver nanoparticles to silica nanospheres using a polymer anchor. Synthesis conditions including reductants, anchor polymers, and surfactants were determined. The successful formation of the nanocomposites was governed by the reduction of silver nitrate in citrate aqueous solution by sodium borohydride and adsorption onto polyvinylpyrrolidone coated silica nanospheres. The size and structure of the nanocomposites were observed by light scattering measurement and scanning electron microscopy, respectively. Optical properties of the nanocomposites were determined by UV-visible absorption spectra.     

Enhanced antibacterial effect of silver nanoparticles obtained by electrochemical synthesis in poly(amide-hydroxyurethane) media

In the present study, we report enhanced antimicrobial properties of 29 and 23 nm silver nanoparticles (Ag NPs) obtained by electrochemical synthesis in poly(amide-hydroxyurethane) media. Antibacterial activity assessed by disk diffusion method indicates that silver nanoparticles produced inhibition zones for both Escherichia coli and Staphylococcus aureus depending on silver concentration. The bacterial growth curve performed in the presence of silver nanoparticles showed a stronger antibacterial effect at lower concentrations than those described in the earlier reports. The effect was both dose and size dependent and was more pronounced against Gram negative bacteria than Gram positive one. The smallest Ag NPs used had a bactericidal effect resulting in killing E. coli cells. Scanning electron microscopy analysis indicated major damage and morphology changes of the silver nanoparticles treated bacterial cells. The major mechanism responsible for the antibacterial effect probably consists in clusters formation and nanoparticles anchorage to the bacterial cell surface.     

Antibacterial activity of silver-modified natural clinoptilolite

The aim of the present work was to estimate the bactericidal activity and efficacy of silver pre-treated clinoptilolite-rich tuff from Marsid (Romania) in solid media (agar plates) against Gram-negative Escherichia coli ATCC 25922 and Gram-positive Staphylococcus aureus ATCC 25923. Two samples of natural clinoptilolite-rich tuff was first pre-treated with oxalic acid and sodium hydroxide solutions, respectively. The sample treated with oxalic acid was then exchanged with sodium chloride solution to obtain sodium form. Finally, both samples were exchanged with silver nitrate solution at room temperature for 24 h to obtain silver forms (P1-Ag⁺ and P2-Ag⁺) of clinoptilolite. The structure, morphology, and elemental composition of the pre-treated clinoptilolite samples were characterized by XRD, infrared (ATR-IR), SEM, and EDX analysis. The antibacterial activity was investigated by exposing E. coli and S. aureus in nutritive agar to the silver-clinoptilolite samples. Microorganisms were completely inhibited at 2 mg Ag⁺-clinoptilolite/mL nutritiv medium after 24 h of incubation at 37 °C. The silver-clinoptilolite sample derived from natural clinoptilolite pre-treated with oxalic acid (P1-Ag⁺) exhibit a stronger antibacterial effect in the presence of E. coli and the sample derived from natural clinoptilolite pre-treated with sodium hydroxide (P2-Ag⁺) in the presence of S. aureus.     

Fabrication of antibacterial monodispersed Ag-SiO2 core-shell nanoparticles with high concentration

Monodispersed Ag-SiO₂ core-shell nanoparticles with a high concentration of 400 mg/L were successfully fabricated by using tetraethoxysilane as silica precursor and reducing silver nitrate with ascorbic acid in the presence of cetyltrimethylammonium bromide as stabilizing agent. The nanoparticles had a spherical silver core in a size range from 14-26 nm in diameter and an amorphous silica shell of 15-28 nm thickness, respectively. The antibacterial effects of Ag-SiO₂ core-shell particles against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were tested by the usual twofold serial dilution method for minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC). The results indicated that the core-shell nanoparticles owned excellent antibacterial effects.     

Study of Drug Release from Pellets Coated with Surelease Containing Hydroxypropylmethylcellulose

The release of metoclopramide hydrochloride (a very water soluble cationic drug) and diclofenac sodium (a sparingly soluble anionic drug) from pellets coated with Surelease containing hydroxypropylmethylcellulose (HPMC) at different coating loads was investigated. The release rates of either drug at each coating composition decreased as the coating load increased. Inclusion of HPMC E15 increased the release rates of both drugs compared to pellets coated only with Surelease. This was thought to be due to the leakage of the soluble part of the film (HPMC E15) during dissolution, which left pores for drug release. The Surelease:HPMC E15 ratio had a major role in the release rates of drugs. Addition of HPMC E15 into Surelease did not change the release mechanism for metoclopramide hydrochloride (the mean value of n ≈ 0.57) from that of Surelease alone, and diffusion remained the main mechanism controlling the release. However, the release exponent (≈1.28) increased for diclofenac sodium on addition of HPMC E15, indicating a dissolutioncontrolled mechanism. Despite its lower water solubility, diclofenac sodium was released slightly faster than metoclopramide hydrochloride from pellets coated with Surelease containing HPMC E15 at equivalent coating loads.     

One-step synthesis of reduced graphite oxide–silver nanocomposite

Here, a general approach for the preparation of reduced graphite oxide (rGO)–silver nanocomposite has been investigated. Graphite oxide (GO) sheets are used as the nanoscale substrates for the formation of rGO–silver composite. GO sheets and Ag ions can be reduced at the same time, under a mild condition using l-ascorbic acid (l-AA) as reducing agent. This simple approach should find practical applications in the production of rGO–silver nanocomposite. The SEM analysis indicates that the silver particles are dispersed on graphene sheets. Raman signals of rGO in the composite are increased by the attached silver nanoparticles, displaying surface-enhanced Raman scattering activity. The degree of enhancement can be adjusted by varying the quantity of silver nanoparticles in the composite. In addition, antibacterial activity of the composite against Escherichia coli was evaluated using zone of inhibition. Composites with Ag clearly showed antibacterial activity against E. coli. While GO alone has almost no effect against this bacteria.     

Extraction of chlorpyrifos and malathion from water by metal nanoparticles

The nanoparticles of gold and silver in solution state and supported over activated alumina are effective systems for the quantitative removal of chlorpyrifos and malathion, two common pesticides found in surface waters of developing nations, from water. In the solution phase, these pesticides adsorb onto the nanoparticles' surfaces and upon interaction for a long time, the nanoparticles with adsorbed pesticides precipitate. In contrast, complete removal of these pesticides occurs when contaminated water is passed over nanoparticles supported on alumina. A prototype of an on-line filter was made using a column of activated alumina powder loaded with silver nanoparticles and the device was used for pesticide removal for extended periods. We believe that the method has great technological potential in drinking water purification, especially using silver nanoparticles.     

Fabrication and in vitro evaluation of bidirectional release and stability studies of mucoadhesive donut-shaped captopril tablets

Objective: To obtain controlled release of captopril in the stomach, coated, mucoadhesive donut-shaped tablets were designed.

Materials and methods: Donut-shaped tablet were made of different ratios of diluents to polymer or combination of polymers by direct compression method. Top and bottom portions of the tablet were coated with water-insoluble polymer followed by mucoadhesive coating. Time of water penetration, measurement of tensile strength, mucoadhesion studies (static ex vivo and ex vivo wash-off) were taken into account for characterization of respective films. In vitro study has been performed at different dissolution mediums. Optimized batches were also prepared by wet granulation. Stability studies of optimized batches have been performed.

Results: The results of time of water penetration and tensile strength indicated positive response against water impermeation. Mucoadhesive studies showed that film thickness of 0.12?mm was good for retention of tablet at stomach. At pH 1.2, optimized batch of tablet made with hydroxypropyl methyl cellulose (HPMC) E15 as binder showed 80% w/w drug release within 4–5?h with maximum average release of 97.49% w/w. Similarly, maximum average releases of 96.36% w/w and 95.47% w/w were obtained with nearly same dissolution patterns using combination of HPMC E5 and HPMC E50 and sodium salt of carboxy methyl cellulose (NaCMC) 500–600 cPs instead of HPMC E15. The release profiles in the distilled water and pH 4.5 followed the above pattern except deviation at pH 6.8. Stability studies were not positive for all combinations.

Conclusion: Coated, mucoadhesive donut-shaped tablet is good for controlled release of drug in the stomach.     

Biological denitrification of drinking water in a slow sand filter

Biological removal of nitrate from drinking water was studied in a slow sand filter. Optimum carbon to nitrogen ratio (C/N) was found to be 1.8 when using acetic acid in batch tests. The filtration rates impact on NO(3)-N removal through the sand filter was assessed for 22.6 mgNO(3)-N/l concentrations while keeping C/N ratio as 1.8 for acetic acid. The filtration rates varied from 0.015, 0.02, 0.03, 0.04, 0.05, and 0.06 m/h, respectively, corresponding to an overall average NO(3)-N removal efficiency of 94%. Although increasing filtration rates decreased NO(3)-N removal, effluent NO(3)-N concentrations at the effluent port were lower than the limit value. The slow sand filter process was unable to provide NO(3)-N removal rate more than 27.1 gN/(m(2)day) (0.05 m/h flow rate). The NO(3)-N removal efficiency slightly dropped from 99% to 94% when the loading rate increased from 27.1 to 32.5 g/(m(2)day), but the effluent water contained higher concentration of NO(2)-N than the standard value.