Quadruple Junction Polymer Solar Cells with Four Complementary Absorber Layers

A monolithic two‐terminal solution‐processed quadruple junction polymer solar cell in an n–i–p (inverted) configuration with four complementary polymer:fullerene active bulk‐heterojunction layers is presented. The subcells possess different optical bandgaps ranging from 1.90 to 1.13 eV. Optical modeling using the transfer matrix formalism enables prediction of the fraction of absorbed photons from sunlight in each subcell and determine the optimal combination of layer thicknesses. The quadruple junction cell features an open‐circuit voltage of 2.45 V and has a power conversion efficiency of 7.6%, only slightly less than the modeled value of 8.2%. The external quantum efficiency spectrum, determined with appropriate light and voltage bias conditions, exhibits in general an excellent agreement with modeled spectrum. The device performance is presently limited by bimolecular recombination, which prevents using thick photoactive layers that could absorb light more efficiently.     

Ternary Polymer Solar Cells Facilitating Improved Efficiency and Stability

The use of a ternary active layer offers a promising approach to enhance the power conversion efficiency (PCE) of polymer solar cells (PSCs) via simply incorporating a third component. Here, a ternary PSC with improved efficiency and stability facilitated by a new small molecule IBC‐F is demonstrated. Even though the PBDB‐T:IBC‐F‐based device gives an extremely low PCE of only 0.21%, a remarkable PCE of 15.06% can be realized in the ternary device based on PBDB‐T:IE4F‐S:IBC‐F with 20% IBC‐F, which is ≈10% greater than that (PCE = 13.70%) of the control binary device based on PBDB‐T:IE4F‐S. The improvement in the device performance of the ternary PSC is mainly attributed to the enhancement of fill factor, which is due to the improved charge dissociation and extraction, suppressed bimolecular and trap‐assisted recombination, longer charge‐carrier lifetime, and enhanced intermolecular interactions for preferential face‐on orientation. Additionally, the ternary device with 20% IBC‐F shows better thermal and photoinduced stability over the control binary device. This work provides a new angle to develop the third components for building ternary PSCs with enhanced photovoltaic performance and stability for practical applications.     

Over 14% Efficiency in Polymer Solar Cells Enabled by a Chlorinated Polymer Donor

Fluorine‐contained polymers, which have been widely used in highly efficient polymer solar cells (PSCs), are rather costly due to their complicated synthesis and low yields in the preparation of components. Here, the feasibility of replacing the critical fluorine substituents in high‐performance photovoltaic polymer donors with chlorine is demonstrated, and two polymeric donors, PBDB‐T‐2F and PBDB‐T‐2Cl, are synthesized and compared in parallel. The synthesis of PBDB‐T‐2Cl is much simpler than that of PBDB‐T‐2F. The two polymers have very similar optoelectronic and morphological properties, except the chlorinated polymer possess lower molecular energy levels than the fluorinated one. As a result, the PBDB‐T‐2Cl‐based PSCs exhibit higher open circuit voltage (V_oc) than the PBDB‐T‐2F‐based devices, leading to an outstanding power conversion efficiency of over 14%. This work establishes a more economical design paradigm of replacing fluorine with chlorine for preparing highly efficient polymer donors.     

Directly Cross-Linked Conjugated Polymer Donor Enables Efficient Polymer Solar Cells with Extraordinary Mechanical Robustness

A cross-linking strategy can result in a three-dimensional network of interconnected chains for the copolymers, thereby improving their mechanical performance. In this work, a series of cross-linked conjugated copolymers, named PC2, PC5, and PC8, constructed with different ratios of monomers are designed and synthesized. For comparison, a random linear copolymer, PR2 is also synthesized based on the similar monomers. When blended with Y6 acceptor, the cross-linked polymers PC2, PC5, and PC8-based polymer solar cells (PSCs) achieve superior power conversion efficiencies (PCEs) of 17.58%, 17.02%, and 16.12%, respectively, which are higher than that (15.84%) of the random copolymer PR2-based devices. Moreover, the PCE of PC2:Y6-based flexible PSC retains ≈88% of the initial efficiency value after 2000 bending cycles, overwhelming the PR2:Y6-based device with the remaining 12.8% of the initial PCE. These results demonstrate that the cross-linking strategy is a feasible and facile approach to developing high-performance polymer donors for the fabrication of flexible PSCs.