Quasi‐Heteroface Perovskite Solar Cells

Perovskite solar cells (PSCs) have attracted unprecedented attention due to their rapidly rising photoelectric conversion efficiency (PCE). In order to further improve the PCE of PSCs, new possible optimization path needs to be found. Here, quasi‐heteroface PSCs (QHF‐PSCs) is designed by a double‐layer perovskite film. Such brand new PSCs have good carrier separation capabilities, effectively suppress the nonradiative recombination of the PSCs, and thus greatly improve the open‐circuit voltage and PCE. The root cause of the performance improvement is the benefit from the additional built‐in electric field, which is confirmed by measuring the external quantum efficiency under applied electric field and Kelvin probe force microscope. Meanwhile, an intermediate band gap perovskite layer can be obtained simply by combining a wide band gap perovskite layer with a narrow band gap perovskite layer. Tunability of the band gap is obtained by varying the film thicknesses of the narrow and wide band gap layers. This phenomenon is quite different from traditional inorganic solar cells, whose band gap is determined only by the narrowest band gap layer. It is believed that these QHF‐PSCs will be an effective strategy to further enhance PCE in PSCs and provide basis to further understand and develop the perovskite materials platform.     

Polymer‐Fullerene Bulk‐Heterojunction Solar Cells

Solution‐processed bulk‐heterojunction solar cells have gained serious attention during the last few years and are becoming established as one of the future photovoltaic technologies for low‐cost power production. This article reviews the highlights of the last few years, and summarizes today's state‐of‐the‐art performance. An outlook is given on relevant future materials and technologies that have the potential to guide this young photovoltaic technology towards the magic 10% regime. A cost model supplements the technical discussions, with practical aspects any photovoltaic technology needs to fulfil, and answers to the question as to whether low module costs can compensate lower lifetimes and performances.     

Polymer–Fullerene Bulk‐Heterojunction Solar Cells

Solution‐processed bulk heterojunction organic photovoltaic (OPV) devices have gained serious attention during the last few years and are established as one of the leading next generation photovoltaic technologies for low cost power production. This article reviews the OPV development highlights of the last two decades, and summarizes the key milestones that have brought the technology to today’s efficiency performance of over 7%. An outlook is presented on what will be required to drive this young photovoltaic technology towards the next major milestone, a 10% power conversion efficiency, considered by many to represent the efficiency at which OPV can be adopted in wide‐spread applications. With first products already entering the market, sufficient lifetime for the intended application becomes more and more critical, and the status of OPV stability as well as the current understanding of degradation mechanisms will be reviewed in the second part of this article.     

Carbon Nanotubes for Dye‐Sensitized Solar Cells

As one type of emerging photovoltaic cell, dye‐sensitized solar cells (DSSCs) are an attractive potential source of renewable energy due to their eco–friendliness, ease of fabrication, and cost effectiveness. However, in DSSCs, the rarity and high cost of some electrode materials (transparent conducting oxide and platinum) and the inefficient performance caused by slow electron transport, poor light‐harvesting efficiency, and significant charge recombination are critical issues. Recent research has shown that carbon nanotubes (CNTs) are promising candidates to overcome these issues due to their unique electrical, optical, chemical, physical, as well as catalytic properties. This article provides a comprehensive review of the research that has focused on the application of CNTs and their hybrids in transparent conducting electrodes (TCEs), in semiconducting layers, and in counter electrodes of DSSCs. At the end of this review, some important research directions for the future use of CNTs in DSSCs are also provided.     

ZnO Nanostructures for Dye‐Sensitized Solar Cells

This Review focuses on recent developments in the use of ZnO nanostructures for dye‐sensitized solar cell (DSC) applications. It is shown that carefully designed and fabricated nanostructured ZnO films are advantageous for use as a DSC photoelectrode as they offer larger surface areas than bulk film material, direct electron pathways, or effective light‐scattering centers, and, when combined with TiO₂, produce a core–shell structure that reduces the combination rate. The limitations of ZnO‐based DSCs are also discussed and several possible methods are proposed so as to expand the knowledge of ZnO to TiO₂, motivating further improvement in the power‐conversion efficiency of DSCs.