Recent Developments in Top‐Emitting Organic Light‐Emitting Diodes

Organic light‐emitting diodes (OLEDs) have rapidly progressed in recent years due to their unique characteristics and potential applications in flat panel displays. Significant advancements in top‐emitting OLEDs have driven the development of large‐size screens and microdisplays with high resolution and large aperture ratio. After a brief introduction to the architecture and types of top‐emitting OLEDs, the microcavity theory typically used in top‐emitting OLEDs is described in detail here. Then, methods for producing and understanding monochromatic (red, green, and blue) and white top‐emitting OLEDs are summarized and discussed. Finally, the status of display development based on top‐emitting OLEDs is briefly addressed.     

Semiconductor‐Nanocrystals‐Based White Light‐Emitting Diodes

In response to the demands for energy and the concerns of global warming and climate change, energy efficient and environmentally friendly solid‐state lighting, such as white light‐emitting diodes (WLEDs), is considered to be the most promising and suitable light source. Because of their small size, high efficiency, and long lifetime, WLEDs based on colloidal semiconductor nanocrystals (or quantum dots) are emerging as a completely new technology platform for the development of flat‐panel displays and solid‐state lighting, exhibiting the potential to replace the conventionally used incandescent and fluorescent lamps. This replacement can cut the ever‐increasing level of energy consumption, solve the problem of rapidly depleting fossil fuel reserves, and improve the quality of the global environment. In this review, the recent progress in semiconductor‐nanocrystals‐based WLEDs is highlighted, the different approaches for generating white light are compared, and the benefits and challenges of the solid‐state lighting technology are discussed.     

Electron Holographic Study of Semiconductor Light‐Emitting Diodes

Semiconductor light‐emitting diodes (LEDs), especially GaN‐based heterostructures, are widely used in light illumination. The lack of inversion symmetry of wurtzite crystal structures and the lattice mismatch at heterointerfaces cause large polarization fields with contributions from both spontaneous polarization and piezoelectric polarization, which in turn results in obvious quantum confined stark effect. It is possible to alleviate this effect if the local electrostatic fields and band alignment induced charge redistribution can be quantitatively determined across the heterostructures. In this Concept, the applications of electron holography to investigate semiconductor LEDs are summarized. Following the off‐axis electron holography scheme, the GaN‐based LED heterostructures including InGaN/GaN‐based quantum wells, other GaN‐based quantum wells, and other forms of GaN‐based LED materials are discussed, focusing on the local potential drops, polarization fields, and charge distributions. Moreover, GaAs‐based LED heterostructures are briefly discussed. The in‐line electron holography scheme emphasizes the capability of large area strain mapping across LED heterostructures with high spatial resolution and accuracy, which is combined with quantitative electrostatic measurements and other advanced transmission electron microscopy characterizations to provide an overall nanometer scale perspective of LED devices for further improvement in their electric and optical properties.     

Exploiting Singlet Fission in Organic Light‐Emitting Diodes

Harvesting of both triplets and singlets yields electroluminescence quantum efficiencies of nearly 100% in organic light‐emitting diodes (OLEDs), but the production efficiency of excitons that can undergo radiative decay is theoretically limited to 100% of the electron–hole pairs. Here, breaking of this limit by exploiting singlet fission in an OLED is reported. Based on the dependence of electroluminescence intensity on an applied magnetic field, it is confirmed that triplets produced by singlet fission in a rubrene host matrix are emitted as near‐infrared (NIR) electroluminescence by erbium(III) tris(8‐hydroxyquinoline) (ErQ₃) after excitonic energy transfer from the “dark” triplet state of rubrene to an “emissive” state of ErQ₃, leading to NIR electroluminescence with an overall exciton production efficiency of 100.8%. This demonstration clearly indicates that the harvesting of triplets produced by singlet fission as electroluminescence is possible even under electrical excitation, leading to an enhancement of the quantum efficiency of the OLEDs. Electroluminescence employing singlet fission provides a route toward developing high‐intensity NIR light sources, which are of particular interest for sensing, optical communications, and medical applications.     

Recent Progress in GaN‐Based Light‐Emitting Diodes

In the last few years the GaN‐based white light‐emitting diode (LED) has been remarkable as a commercially available solid‐state light source. To increase the luminescence power, we studied GaN LED epitaxial materials. First, a special maskless V‐grooved c‐plane sapphire was fabricated, a GaN lateral epitaxial overgrowth method on this substrate was developed, and consequently GaN films are obtained with low dislocation densities and an increased light‐emitting efficiency (because of the enhanced reflection from the V‐grooved plane). Furthermore, anomalous tunneling‐assisted carrier transfer in an asymmetrically coupled InGaN/GaN quantum well structure was studied. A new quantum well structure using this effect is designed to enhance the luminescent efficiency of the LED to ～72%. Finally, a single‐chip phosphor‐free white LED is fabricated, a stable white light is emitted for currents from 20 to 60 mA, which makes the LED chip suitable for lighting applications.