Single-mode distributed feedback and microlasers based on quantum-dot gain material

Quantum-dot gain material fabricated by self-organized epitaxial growth on GaAs substrates is used for the realization of 980-nm and 1.3-/spl mu/m single-mode distributed feedback (DFB) lasers and edge-emitting microlasers. Quantum-dot specific properties such as low-threshold current, broad gain spectrum, and low-temperature sensitivity could be demonstrated on ridge waveguide and DFB lasers in comparison to quantum-well-based devices. 980-nm DFB lasers exhibit stable single-mode behavior from 20/spl deg/C up to 214/spl deg/C with threshold currents < 15 mA (1-mm cavity length). Utilizing the low-bandgap absorption of quantum-dot material miniaturized monolithically integrable edge-emitting lasers could be realized by deeply etched Bragg mirrors with cavity lengths down to 12 /spl mu/m. A minimum threshold current of 1.2 mA and a continuous-wave (CW) output power of >1 mW was obtained for 30-/spl mu/m cavity length. Low-threshold currents of 4.4 mA could be obtained for 1.3-/spl mu/m emitting 400-/spl mu/m-long high-reflection coated ridge waveguide lasers. DFB lasers made from this material by laterally complex coupled feedback gratings show stable CW single-mode emission up to 80/spl deg/C with sidemode suppression ratios exceeding 40 dB.     

Design consideration and performance of high-power and high-brightness InGaAs-InGaAsP-AlGaAs quantum-well diode lasers (/spl lambda/=0.98 /spl mu/m)

We conduct a theoretical analysis of the design, fabrication, and performance measurement of high-power and high-brightness strained quantum-well lasers emitting at 0.98 /spl mu/m. The material system of interest consists of an Al-free InGaAs-InGaAsP active region and AlGaAs cladding layers. Some key parameters of the laser structure are theoretically analyzed, and their effects on the laser performance are discussed. The laser material is grown by metal-organic chemical vapor deposition and demonstrates high quality with low-threshold current density, high internal quantum efficiency, and extremely low internal loss. High-performance broad-area multimode and ridge-waveguide single-mode laser devices are fabricated. For 100-/spl mu/m-wide stripe lasers having a cavity length of 800 /spl mu/m, a high slope efficiency of 1.08 W-A, a low vertical beam divergence of 34/spl deg/, a high output power of over 4.45 W, and a very high characteristic temperature coefficient of 250 K were achieved. Lifetime tests performed at 1.2-1.3 W (12-13 mW//spl mu/m) demonstrates reliable performance. For 4-/spl mu/m-wide ridge waveguide single-mode laser devices, a maximum output power of 394 mW and fundamental mode power up to 200 mW with slope efficiency of 0.91 mW//spl mu/m are obtained.     

Long-wavelength quantum-dot lasers on GaAs substrates: from media to device concepts

Recent progress in semiconductor quantum-dot (QD) lasers approaches qualitatively new levels, when dramatic progress in the development of the active medium already motivates search for new concepts in device and system designs. QDs, which represent coherent inclusions of narrower bandgap semiconductor in a wider gap semiconductor matrix, offer a possibility to extend the wavelength range of heterostructure lasers on GaAs substrates to 1.3 /spl mu/m and beyond and create devices with dramatically improved performance, as compared to commercial lasers on InP substrates. Low-threshold current density (100 A/cm/sup 2/), very high characteristic temperature (170 K up to 65/spl deg/C), and high differential efficiency (85%) are realized in the same device. The possibility to stack QDs (e.g., tenfold) without an increase in the threshold current density and any degradation of the other device parameters allow realization of high modal gain devices suitable for applications in 1.3-/spl mu/m short-cavity transmitters and vertical-cavity surface-emitting lasers (VCSELs). The 1.3-/spl mu/m QD GaAs VCSELs operating at 1.2-mW continuous-wave output power at 25/spl deg/C are realized, and long operation lifetime is manifested. Evolution of GaAs-based 1.3-/spl mu/m lasers offers a unique opportunity for telecom devices and systems. Single-epitaxy VCSEL vertical integration with intracavity electrooptic modulators for lasing wavelength adjustment and/or ultrahigh-frequency wavelength modulation is possible. Arrays of wavelength-tunable VCSELs and wavelength-tunable resonant-cavity photodetectors may result in a new generation of "intelligent" cost-efficient systems for ultrafast data links in telecom.     

A quantitative study of radiative, Auger, and defect related recombination processes in 1.3-/spl mu/m GaInNAs-based quantum-well lasers

By measuring the spontaneous emission (SE) from normally operating /spl sim/1.3-/spl mu/m GaInNAs-GaAs-based lasers we have quantitatively determined the variation of each of the current paths present in the devices as a function of temperature from 130 K to 370 K. From the SE measurements we determine how the current I close to threshold, varies as a function of carrier density n, which enables us to separate out the main current paths corresponding to monomolecular (defect-related), radiative or Auger recombination. We find that defect-related recombination forms /spl sim/55% of the threshold current at room temperature (RT). At RT, radiative recombination accounts for /spl sim/20% of I/sub th/ with the remaining /spl sim/25% being due to nonradiative Auger recombination. Theoretical calculations of the threshold carrier, density as a function of temperature were also performed, using a ten-band k /spl middot/ p Hamiltonian. Together with the experimentally determined defect-related, radiative, and Auger currents we deduce the temperature variation of the respective recombination coefficients (A, B, and C). These are compared with theoretical calculations of the coefficients and good agreement is obtained. Our results suggest that by eliminating the dominant defect-related current path, the threshold current density of these GaInNAs-GaAs-based devices would be approximately halved at RT. Such devices could then have threshold current densities comparable with the best InGaAsP/InP-based lasers with the added advantages provided by the GaAs system that are important for vertical integration.     

1.3-/spl mu/m-range GaInNAsSb-GaAs VCSELs

1.3-/spl mu/m-range GaInNAsSb vertical-cavity surface-emitting lasers (VCSELs) with the doped mirror were investigated. GaInNASb active layers that include a small amount of Sb can be easily grown in a two-dimensional manner as compared with GaInNAs due to the suppression of the formation of three-dimensional growth in MBE growth. The authors obtained the lowest J/sub th/ per well (150 A/cm/sup 2//well) for the edge-emission type lasers due to the high quality of GaInNAsSb quantum wells. Using this material for the active media, the authors accomplished the first continuous wave operation of 1.3-/spl mu/m-range GaInNAsSb VCSELs. For the reduction of the threshold voltage and the differential resistance, they used the doped mirror grown by metal-organic chemical vapor deposition (MOCVD). By three-step growth, they obtained 1.3-/spl mu/m GaInNAs-based VCSELs with the low threshold current density (3.6 kA/cm/sup 2/), the low threshold voltage (1.2 V), and the low differential resistance (60 /spl Omega/) simultaneously for the first time. The back-to-back transmission was carried out up to 5 Gb/s. Further, the uniform operation of 10-ch VCSEL array was demonstrated. The maximum output power of 1 mW was obtained at 20/spl deg/C by changing the reflectivity of the front distributed Bragg reflector mirror. GaInNAsSb VCSELs were demonstrated to be very promising material for realizing the 1.3-/spl mu/m signal light sources, and the usage of the doped mirror grown by MOCVD is the best way for 1.3-/spl mu/m VCSELs.     

Long-wavelength vertical-cavity surface-emitting lasers on InP with lattice matched AlGaInAs-InP DBR grown by MOCVD

1.3- and 1.55-/spl mu/m vertical-cavity surface-emitting lasers (VCSELs) on InP have been realized. High-reflectivity AlGaInAs-InP lattice matched distributed Bragg reflectors (DBRs) were grown on InP substrates. 1.7 (for 1.3 /spl mu/m) and 2.0 (for 1.55 /spl mu/m) mW single mode power at 25/spl deg/C, 0.6 mW single mode power at 85/spl deg/C and lasing operation at >100/spl deg/C have been achieved. 10 Gbit/s error free transmissions through 10 km standard single mode fiber for 1.3-/spl mu/m VCSELs, and through 15 km nonzero dispersion shift fiber for 1.55-/spl mu/m VCSELs, have been demonstrated. With the addition of an SOA, 100 km error free transmission at 10 Gbit/s also has been demonstrated through a negative dispersion fiber. No degradation has been observed after over 2500-h aging test.     

Surface-plasmon quantum cascade microlasers with highly deformed resonators

We report the demonstration of surface-plasmon microcylinder quantum cascade lasers with circular and deformed resonators. An improved self-alignment fabrication technique was developed that allows the use of wet etching, necessary to achieve smooth and clean surfaces, in combination with the deposition of the surface-plasmon-carrying metal layer up to the very edge of the resonator, where the optical mode is mostly located. The diameter of the microcylinders ranges from 75 to 180 /spl mu/m while their deformation coefficient /spl epsiv/ ranges from /spl epsiv/=0 to /spl epsiv/=0.32. Circular microcylinder lasers show a reduction of /spl sim/50% of the threshold current density with respect to devices with standard ridge-waveguide resonators. On the other hand, highly deformed microcylinder lasers exhibit a complex mode structure, suggesting the onset of chaotic behavior.     

InP-GaInP quantum-dot lasers emitting between 690-750 nm

We describe the growth, material characterization, and device characterization of InP-GaInP quantum-dot lasers for operation in the wavelength range 690-750 nm. We show that the growth conditions have a major influence on the form of the gain spectrum. Relatively flat gain can be achieved over a spectral width of 90 nm at 300 K using samples containing a bimodal distribution of dot sizes, or narrower gain spectra at shorter wavelength can be achieved by suppressing the bimodal distribution by using (211)B substrates. Optimization of samples grown on substrates with the growth surface of (100) misorientated by 10/spl deg/ toward [111] results in laser operation between 729 and 741 nm and with a room temperature threshold current density as low as 190 A/spl middot/cm/sup -2/ for a 2000-/spl mu/m-long device with uncoated facets.     

1.5-/spl mu/m wavelength narrow stripe distributed reflector lasers for high-performance operation

1.5 /spl mu/m-wavelength narrow stripe distributed reflector (DR) lasers consisting of first-order vertical grating (VG) and distributed Bragg reflector (DBR) mirrors were realized by deeply etching the as-grown wafer and passivating the etched surface by SiO/sub 2/. Design consideration, fabrication, and lasing performances were studied. A low threshold current of 2.8 mA and a differential quantum efficiency of 28% from the front facet were achieved for a 1.3 /spl mu/m stripe width and a 150 /spl mu/m cavity length under room temperature (RT) continuous wave (CW) operation. Details of threshold behavior of these lasers are presented. Lasing performances of FP and DBR lasers are also described for comparison.     

Theoretical and experimental analysis of 1.3-/spl mu/m InGaAsN/GaAs lasers

We present a comprehensive theoretical and experimental analysis of 1.3-/spl mu/m InGaAsN/GaAs lasers. After introducing the 10-band k /spl middot/ p Hamiltonian which predicts transition energies observed experimentally, we employ it to investigate laser properties of ideal and real InGaAsN/GaAs laser devices. Our calculations show that the addition of N reduces the peak gain and differential gain at fixed carrier density, although the gain saturation value and the peak gain as a function of radiative current density are largely unchanged due to the incorporation of N. The gain characteristics are optimized by including the minimum amount of nitrogen necessary to prevent strain relaxation at the given well thickness. The measured spontaneous emission and gain characteristics of real devices are well described by the theoretical model. Our analysis shows that the threshold current is dominated by nonradiative, defect-related recombination. Elimination of these losses would enable laser characteristics comparable with the best InGaAsP/InP-based lasers with the added advantages provided by the GaAs system that are important for vertical integration.     

Very low threshold current density of 1.3-/spl mu/m-range GaInNAsSb-GaNAs3 and 5 QWs lasers

The dependence of the threshold current density on the number of wells for 1.3-/spl mu/m-range edge emitting lasers using GaInNAsSb novel material, at which the incorporation of the small amount of Sb make the two-dimensional growth condition wide, is studied. The lowest record ever reported for the threshold current density per well (Jth A/cm/sup 2//well@L=900 /spl mu/m) for 3 QWs lasers was achieved. GaInNAs-based 5 QWs lasers with the very low threshold current density per well of 160 A/cm/sup 2/ were successfully grown for the first time. Therefore, no significant deterioration of Jth is observed even though the number of wells increased up to 5. Since Jth of 5 QWs doesn't increased rapidly compared to SQW and 3 QWs as decreasing the cavity length, it is considered that lower Jth can be obtained by utilizing 5 QWs in devices such VCSELs which use short cavity length.     

Resonantly pumped eyesafe erbium lasers

The viability of high-power and high-energy, direct eyesafe emission from bulk erbium lasers has recently been demonstrated. In this paper, we present a review of eyesafe erbium lasers that are resonantly pumped by both fiber and diode lasers. High brightness pumping with a 1.53-/spl mu/m erbium fiber laser has yielded 60 W of continuous wave (CW) output, 10 W of repetitively Q-switched output, and as much as 16 mJ of pulse energy. Diode laser pumping has yielded 38 W of quasi-CW output and >40 mJ of Q-switched output.     

Differential gain and linewidth-enhancement factor in dilute-nitride GaAs-based 1.3-/spl mu/m diode lasers

The effect of the quantum-well nitride content on the differential gain and linewidth enhancement factor of dilute-nitride GaAs-based near 1.3-/spl mu/m lasers was studied. Gain-guided and ridge waveguide lasers with 0%, 0.5%, and 0.8% nitrogen content InGaAsN quantum wells were characterized. Experiment shows that the linewidth enhancement factor is independent on the nitride content, and is in the range 1.7-2.5 for /spl lambda/=1.22--1.34 /spl mu/m dilute-nitride GaAs-based lasers. Differential gain and index with respect to either current or carrier concentration are reduced in dilute-nitride devices.     

Single-mode 1.27-/spl mu/m InGaAs:Sb-GaAs-GaAsP quantum well vertical cavity surface emitting lasers

The 1.27-/spl mu/m InGaAs:Sb-GaAs-GaAsP vertical cavity surface emitting lasers (VCSELs) were grown by metalorganic chemical vapor deposition and exhibited excellent performance and temperature stability. The threshold current varies from 1.8 to 1.1 mA and the slope efficiency falls less than /spl sim/35% from 0.17 to 0.11 mW/mA as the temperature is raised from room temperature to 75/spl deg/C. The VCSELs continuously operate up to 105/spl deg/C with a slope efficiency of 0.023 mW/mA. With a bias current of only 5 mA, the 3-dB modulation frequency response was measured to be 8.36 GHz, which is appropriate for 10-Gb/s operation. The maximal bandwidth is estimated to be 10.7 GHz with modulation current efficiency factor of /spl sim/5.25GHz/(mA)/sup 1/2/. These VCSELs also demonstrate high-speed modulation up to 10 Gb/s from 25/spl deg/C to 70/spl deg/C. We also accumulated life test data up to 1000 h at 70/spl deg/C/10 mA.     

GaInNAsSb for 1.3-1.6-/spl mu/m-long wavelength lasers grown by molecular beam epitaxy

High-efficiency optical emission past 1.3 /spl mu/m of GaInNAs on GaAs, with an ultimate goal of a high-power 1.55-/spl mu/m vertical-cavity surface-emitting laser (VCSEL), has proven to be elusive. While GaInNAs could theoretically be grown lattice-matched to GaAs with a very small bandgap, wavelengths are actually limited by the N solubility limit and the high In strain limit. By adding Sb to the GaInNAs quaternary, we have observed a remarkable shift toward longer luminescent wavelengths while maintaining high intensity. The increase in strain of these new alloys necessitates the use of tensile strain compensating GaNAs barriers around quantum-well (QW) structures. With the incorporation of Sb and using In concentrations as high as 40%, high-intensity photoluminescence (PL) was observed as long as 1.6 /spl mu/m. PL at 1.5 /spl mu/m was measured with peak intensity over 50% of the best 1.3 /spl mu/m GaInNAs samples grown. Three QW GaIn-NAsSb in-plane lasers were fabricated with room-temperature pulsed operation out to 1.49 /spl mu/m.     

Investigation of 1.3-/spl mu/m GaInNAs vertical-cavity surface-emitting lasers (VCSELs) using temperature, high-pressure, and modeling techniques

We have investigated the temperature and pressure dependence of the threshold current (I/sub th/) of 1.3 /spl mu/m emitting GaInNAs vertical-cavity surface-emitting lasers (VCSELs) and the equivalent edge-emitting laser (EEL) devices employing the same active region. Our measurements show that the VCSEL devices have the peak of the gain spectrum on the high-energy side of the cavity mode energy and hence operate over a wide temperature range. They show particularly promising I/sub th/ temperature insensitivity in the 250-350 K range. We have then used a theoretical model based on a 10-band k.P Hamiltonian and experimentally determined recombination coefficients from EELs to calculate the pressure and temperature dependency of I/sub th/. The results show good agreement between the model and the experimental data, supporting both the validity of the model and the recombination rate parameters. We also show that for both device types, the super-exponential temperature dependency of I/sub th/ at 350 K and above is due largely to Auger recombination.     

The impact of LOC structures on 670-nm (Al)GaInP high-power lasers

We investigate the potential of large optical cavity (LOC)-laser structures for AlGaInP high-power lasers. For that we study large series of broad area lasers with varying waveguide widths to obtain statistically relevant data. We study in detail I/sub th/, /spl alpha//sub i/, /spl eta//sub i/, and P/sub max/, and analyze above-threshold behavior including temperature stability and leakage current. We got as expected for LOC structures minimal /spl alpha//sub i//spl les/1 cm/sup -1/ resulting in /spl eta//sup d/=1.1 W/A for 64/spl times/2000 /spl mu/m/sup 2/ uncoated devices. We obtain total output powers /spl ges/3.2 W (qCW) and /spl ges/1.5 W (CW) at 20/spl deg/C.     

Lasing at 1.28 /spl mu/m of InAs-GaAs quantum dots with AlGaAs cladding layer grown by metal-organic chemical vapor deposition

We report the device characteristics of stacked InAs-GaAs quantum dot (QD) lasers cladded by an Al/sub 0.4/Ga/sub 0.6/As layer grown at low temperature by metal-organic chemical vapor deposition. In the growth of quantum dot lasers, an emission wavelength shifts toward a shorter value due to the effect of postgrowth annealing on quantum dots. This blueshift can be suppressed when the annealing temperature is below 570/spl deg/C. We achieved 1.28-/spl mu/m continuous-wave lasing at room temperature of five layers stacked InAs-GaAs quantum dots embedded in an In/sub 0.13/Ga/sub 0.87/As strain-reducing layer whose p-cladding layer was grown at 560/spl deg/C. From the experiments and calculations of the gain spectra of fabricated quantum dot lasers, the observed lasing originates from the first excited state of stacked InAs quantum dots. We also discuss the device characteristics of fabricated quantum dot lasers at various growth temperatures of the p-cladding layer.     

High-power CW deep-UV coherent light sources around 200 nm based on external resonant sum-frequency mixing

We report pure continuous-wave (CW) high-power (>100 mW) deep-ultraviolet (DUV) light sources emitting around 200-nm spectral region based on singly resonant sum-frequency mixing (SRSFM). Efficient DUV generation is made possible by use of a Brewster-cut CsLiB/sub 6/O/sub 10/ (CLBO) crystal near noncritically phase-matched (NCPM) condition for the SFM of 1-/spl mu/m output of neodymium lasers. The CW radiation of fifth-harmonic wavelength of a neodymium laser at 213 nm was generated by the SFM of enhanced 1064-nm radiation with single-passing 266-nm radiation produced by external-resonant frequency doubling of a 532-nm green laser. With 1.8 W of 266-nm radiation incident upon a CLBO crystal, as much as 180 mW of CW 213-nm power has been produced. The sub-200-nm CW radiation with 140-mW power has also been achieved by SFM of 1064 nm with 244-nm radiation from a frequency-doubled Argon-ion laser in the CLBO crystal operated near the NCPM condition.     

Strain-compensated GaInNAs structures for 1.3-/spl mu/m lasers

GaAs-based dilute nitride lasers are potential light sources for future optical fiber communication systems at the wavelength of 1.3 /spl mu/m. In this paper we discuss the results of studies of optimization of the growth conditions and active regions of the GaAs-based lasers. To this end, a series of samples were grown using the molecular beam epitaxy technique. The active regions consisted of quantum wells, strain-compensating layers, and strain-mediating layers. They were characterized by photoluminescence and double crystal X-ray diffraction methods. The optical properties were very much affected by a choice of growth conditions, details of the quantum wells, and postgrowth thermal treatment. Preliminary results on diode-pumped vertical-cavity surface emitting lasers, which launch light power of 3.5 mW coupled into a single-mode fiber, are also presented.