Interaction of crosslinked ethylene–propylene–diene terpolymer blends with chlorinated organic penetrants

The sorption and diffusion of halogenated hydrocarbon penetrants through different ethylene–propylene–diene terpolymer (EPDM) blends, such as EPDM/natural rubber, EPDM/bromobutyl rubber, and EPDM/styrene butadiene rubber (50/50 w/w), were studied. The diffusion coefficient of halogenated penetrants fell in the range 1.5–14.52 × 10^?7 cm²/s in the temperature range of 25–60°C. Transport data were affected by the nature of the interacting solvent molecule rather than its size and also by the structural variations of the EPDM blends. 1,2‐Dichloroethane showed a lower mass uptake compared to other penetrants. The temperature dependence of the transport coefficient was used to estimate the activation parameters, such as the activation energy of diffusion (E_D) and the activation energy of permeation (E_p) from Arrhenius plots. The activation parameters for E_D of aliphatic chlorinated organic penetrants was in the range 7.27–15.58 kJ/mol. These values fell in the expected range for rubbery polymers, well above their glass‐transition temperature. Also, the thermodynamic parameters, such as enthalpy and entropy, were calculated and fell in the range 2–15 kJ/mol and 3–54 J/mol/K, respectively. Both first‐ and second‐order transport kinetics models were used to investigate the transport kinetics, and first‐order kinetics were followed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1366–1375, 2003     

Preparation and characterization of acrylonitrile–styrene–methylmethacrylate terpolymer as a compatibilizer for rubber blends

Acrylonitrile‐co‐styrene‐co‐methylmethacrylate (AN‐S‐MMA) terpolymer was prepared by bulk and emulsifier‐free emulsion polymerization techniques. The bulk and emulsion terpolymers were characterized by means of Fourierr transform infrared spectroscopy, ¹³C nuclear magnetic resonance (NMR) spectroscopy, gel permeation chromatography, thermal gravimetric analysis, and elemental analysis. The kinetics of the terpolymerization were studied. The terpolymers were then incorporated into butadiene—acrylonitrile rubber (NBR)/ethylene propylene diene monomer rubber (EPDM) blends and into chloroprene rubber (CR)/EPDM blend. The terpolymers were then tested for potential as compatibilizers by using scanning electron microscopy and differential scanning calorimetry. The terpolymers improved the compatibility of CR/EPDM and NBR/EPDM blends. The physicomechanical properties of CR/EPDM and NBR/EPDM blend vulcanizates revealed that the incorporation of terpolymers was advantageous, since they resulted in blend vulcanizates with higher 100% moduli and with more thermally stable mechanical properties than the individual rubbers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3143–3153, 2003     

Ionic conductivity,dielectric behavior,and HATR–FTIR analysis onto poly(methyl methacrylate)–poly(vinyl chloride) binary solid polymer blend electrolytes

Solid polymer electrolytes comprising blends of poly(vinyl chloride) (PVC) and poly(methyl methacrylate) (PMMA) as host polymers and lithium bis(trifluoromethanesulfonyl) imide (LiTFSI) as dopant salt were prepared by solution‐casting technique. The ionic conductivity and dielectric behavior were investigated by using AC‐impedance spectroscopy in the temperature range of 298–353 K. The highest ionic conductivity of (1.11 ± 0.09)×10^?6 S cm^?1 is obtained at room temperature. The temperature dependence of ionic conductivity plots showed that these polymer blend electrolytes obey Arrhenius behavior. Conductivity–frequency dependence, dielectric relaxation, and dielectric moduli formalism were also further discussed. Apart from that, the structural characteristic of the polymer blend electrolytes was characterized by means of horizontal attenuated total reflectance–Fourier transform infrared (HATR–FTIR) spectroscopy. HATR–FTIR spectra divulged the interaction between PMMA, PVC, and LiTFSI. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Oil absorbents based on styrene–butadiene rubber

Four oil absorbents based on styrene–butadiene (SBR)—pure SBR (PS), 4‐tert‐butylstyrene–SBR (PBS), EPDM–SBR network (PES), and 4‐tert‐butylstyrene‐EPDM‐SBR (PBES)—were produced from crosslinking polymerization of uncured styrene–butadiene rubber (SBR), 4‐tert‐butylstyrene (tBS), and ethylene–propylene–diene terpolymer (EPDM). The reaction took place in toluene using benzoyl peroxide (BPO) as an initiator. Uncured SBR was used as both a prepolymer and a crosslink agent in this work, and the crosslinked polymer was identified by IR spectroscopy. The oil absorbency of the crosslinked polymer was evaluated with ASTM method F726‐81. The order of maximum oil absorbency was PBES > PBS > PES > PS. The maximum values of oil absorbency of PBES and PBS were 74.0 and 69.5 g/g, respectively. Gel fractions and swelling kinetic constants, however, had opposite sequences. The swelling kinetic constant of PS evaluated by an experimental equation was 49.97 × 10^?2 h^?1. The gel strength parameter, S, the relaxation exponent, n, and the fractal dimension, d_f, of the crosslinked polymer at the pseudo‐critical gel state were determined from oscillatory shear measurements by a dynamic rheometer. The morphologies and light resistance properties of the crosslinked polymers were observed, respectively, with a scanning electron microscope (SEM) and a color difference meter.     

Properties of copolymer-type polyacetal/ethylene–propylene–diene terpolymer blends

Two kinds of polymer blends, polyacetals (POMs) and ethylene–propylene–diene terpolymer (EPDM), have been prepared by mechanical blending. The rubbery EPDM was added to the rigid POM matrix to increase toughness. The mechanical, physical, thermal, dynamic mechanical, and morphological properties of these samples have been measured. The notched Izod impact strength and the elongation of the blends reaches a maximum at 7.5 wt % EPDM content. Scanning electron micrographs (SEM) showed that the domain sizes of EPDM vary from 0.25 to 1.0 μm and were independent of the composition. The POM/EPDM blends were determined to be immiscible by SEM, but showed single T_g behavior as determined by differential scanning calorimetry (DSC) and dynamic mechanical analyses up to 7.5 wt % EPDM. Because of that, the T_g's of POM and EPDM were very similar in value. © 1993 John Wiley & Sons, Inc.     

Conducting properties of iodine‐doped low‐density polyethylene–poly(4‐vinylpyridine) blends

The conductivities of blends of low‐density polyethylene and poly(4‐vinyl pyridine) (P4VP) were studied. The blends were synthesized by in situ sorption and thermal polymerization of 4‐vinylpyridine in low‐density polyethylene. They showed, after iodine doping, conductivities of 1.7 to 5.0 × 10^?7 S cm^?1 at 298 K, depending on the P4VP mass increment into the matrix. Their conductivities were one order of magnitude higher for measurements at 338 K. The optimum ratio of iodine to pyridine (n) which gave the highest conductivity was 0.21. The thermal stability of doped blends was acceptable for their uses as electrochemical devices. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 939–944, 2003     

New soluble π-conjugated polymers containing 2-diisopropylamino-1,3,5-triazine unit: synthesis,characterization and optical properties

A new type of π-conjugated polymers containing 2-diisopropylamino-1,3,5-triazine were prepared via Sonogashira or Suzuki coupling reaction. The structures of the polymers were performed by FT-IR, ¹H-NMR, UV–vis spectroscopy, photoluminescence spectroscopy, gel permeation chromatography, thermal analysis and X-ray diffraction analysis. These derived polymers were soluble in common organic solvents such as tetrahydrofuran, chloroform, toluene, and showed good thermal stability. Polymers containing 1,4-diethynyl-2,5-bis(dialkoxy)benzene unit in polymer main chain emitted blue-green light in solution phase under UV light irradiation except with polymer containing 9,9-dioctylfluorene(blue light). Acidochromic behaviors of polymers were studied in CHCl₃-CF₃COOH mixtures. 9,9-Dioctylfluorene-containing polymer displayed better acidochromic property and linear relationship between absorbance and concentration with the concentration of CF₃COOH from 5.384?×?10^?4 to 26.92?×?10^?4 mol/L. Electrochemical behaviors of polymers depicted p-doping and some hole-transporting properties. XRD results showed that polymers exhibited certain crystallinity.     

Chemical preparation of conducting polyfuran/poly(2‐chloroaniline) composites and their properties: A comparison of their components,polyfuran and poly(2‐chloroaniline)

Conductive homopolymers and composites of poly(2‐chloroaniline) (P2ClAn) and polyfuran (PFu) were synthesized chemically in hydrous and anhydrous media, and their properties were investigated. The polymers and composites were characterized by Fourier infrared spectroscopy, ultraviolet‐visible absorption spectroscopy, thermogravimetric analysis, differential scanning calorimetry, scanning electron microscopy, magnetic susceptibility, and conductivity measurements. It was found that the PFu/P2ClAn composite is thermally more stable than both the P2ClAn/PFu composite and the homopolymers. It was determined from Gouy scale measurements that conducting mechanisms of homopolymers and composites are polaron and bipolaron in nature. It was observed that the conductivity and magnetic susceptibility values changed with a changing amount of the guest polymer in the prepared composites. The conductivity (3.21 × 10^?2 S/cm) of the P2ClAn/PFu (55.8% m/m) composite was found to be higher than the conductivities of both homopolymers (σ_PFu = 1.44 × 10^?5 S/cm; σ_P2ClAn = 1.32 × 10^?3 S/cm). It was determined that the composites synthesized had different conductivities and morphological and thermal properties from changing synthesis order. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2924–2931, 2003     

Compatibilizing effect of ethylene–propylene–diene grafted maleic anhydride terpolymer on the blend of polyamide 66 and thermal liquid crystalline polymer

Polyamide 66–thermal liquid crystalline polymer (PA66/TLCP) composites containing 10 wt% TLCP was compatibilized by ethylene–propylene–diene‐grafted maleic anhydride terpolymer (MAH‐g‐EPDM). The blending was performed on a twin‐screw extrusion, followed by an injection molding. The rheological, dynamic mechanical analysis (DMA), thermal, mechanical properties, as well as the morphology and FTIR spectra, of the blends were investigated and discussed. Rheological, DMA, and FTIR spectra results showed that MAH‐g‐EPDM is an effective compatibilizer for PA66/TLCP blends. The mechanical test indicated that the tensile strength, tensile elongation, and the bending strength of the blends were improved with the increase of the content of MAH‐g‐EPDM, which implied that the blends probably have a great frictional shear force, resulting from strong adhesion at the interface between the matrix and the dispersion phase; while the bending modulus was weakened with the increase of MAH‐g‐EPDM content, which is attributed to the development of the crystalline phase of PA66 hampered by adding MAH‐g‐EPDM. POLYM. COMPOS., 27:608–613, 2006. © 2006 Society of Plastics Engineers     

Electroactive mixtures of polyaniline and EPDM rubber: Chemical,thermal, and morphological characterization

A new route for blending polyaniline (PAni) and EPDM rubber was devised with maleic anhydride as a compatibilizer precursor. Rubber matrices containing ammonium peroxidisulfate and dodecyl benzene sulfonic acid were cast from organic solvents. Exposure to the monomer vapors allowed the chemical polymerization of aniline. The influence of PAni and the compatibilizer on the thermal properties, chemical structure, electrical conductivity, and morphology of the mixtures was observed with differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared, in situ conductivity measurements, and optical microscopy. The micrographs showed a good distribution of the PAni complex in the matrix. The use of approximately 2 wt % compatibilizer resulted in chemical interactions between maleic anhydride and the PAni complex formed with dodecyl benzene sulfonic acid, which could enhance the compatibility between the polymers. The obtained blends reached relative electrical conductivity values of up to 9 × 10^?3 S cm^?1. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 535–547, 2003     

Grafting of N‐carbamyl maleamic acid onto a styrene–butadiene–styrene copolymer

A styrene–butadiene–styrene block copolymer (SBS) was functionalized with N‐carbamyl maleamic acid (NCMA) using two peroxide initiators with the aim of grafting polar groups onto the molecular chains of the polymer. The influence of the concentration of benzoyl peroxide (BPO) and 2,5‐dimethyl, 2,5‐diterbuthylperoxihexane (DBPH) was studied. The concentration of peroxy groups ranged between 0.75 and 6 × 10^?4 mol % while the concentration of NCMA was constant at 1 wt %. The reaction temperature was chosen according to the type of peroxide employed, being 140°C for BPO and 190°C for DBPH. FTIR spectra confirmed that NCMA was grafted onto the SBS macromolecules. It was found that the highest grafting level was achieved at a concentration of peroxy groups of about 3 × 10^?4 mol %. Contact angle measurements were used to characterize the surface of the SBS and modified polymers. The contact angle of water drops decreased with the amount of NCMA grafted from 95°, the one corresponding to the SBS, to about 73°. T‐peel strength of polymer/polyurethane adhesive/polymer joints made with the modified polymers was larger than those prepared with the original SBS. The peel strength of SBS modified with 1.5 and 3 × 10^?4 mol % of peroxy groups from BPO were five times larger than that of the original SBS. The materials modified using BPO showed peel strengths higher than the ones obtained with DBPH. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4468–4477, 2006     

Influence of calcium carbonate filler and mixing type process on structure and properties of styrene–acrylonitrile/ethylene–propylene–diene polymer blends

The properties of styrene–acrylonitrile (SAN) and ethylene–propylene–diene (EPDM) blends containing different types of calcium carbonate filler were studied. The influence of mixing type process on the blend properties was also studied. Two different mixing processes were used. The first one includes mixing of all components together. The other process is a two‐step mixing procedure: masterbatch (MB; EPDM/SAN/filler blend) was prepared and then it was mixed with previously prepared polymer blend. Surface energy of samples was determined to predict the strength of interactions between polymer blend components and used fillers. The phase morphology of blends and their thermal and mechanical properties were studied. From the results, it can be concluded that the type of mixing process has a strong influence on the morphological, thermal, and mechanical properties of blends. The two‐step mixing process causes better dispersion of fillers in blends as well as better dispersion of EPDM in SAN matrix, and therefore, the finest morphology and improved properties are observed in blends with MB. It can be concluded that the type of mixing process and carefully chosen compatibilizer are the important factors for obtaining the improved compatibility of SAN/EPDM blends. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of polypyrrole nanoparticles in natural rubber–polystyrene blend via emulsion polymerization

Nanoparticles of polypyrrole (PPy) in 40/60 wt % natural rubber (NR)–polystyrene (PS) blends were synthesized by emulsion polymerization using ferric sulfate [Fe₂ (SO₄)₃], sodium dodecyl sulfate (SDS), and n‐amyl alcohol as the oxidant, surfactant, and cosurfactant, respectively. The NR/PS/PPy blends were characterized by Fourier transform infrared spectroscopy (FTIR), elemental analysis, thermogravimetric analysis (TGA), and field emission scanning electron microscopy (FESEM). FESEM micrographs showed that NR/PS/PPy blends were homogeneous, and PPy nanoparticles were well distributed throughout the binary matrix of NR/PS. The size of PPy particles in the blends was in the range of 26–80 nm. The electrical conductivities of the pellets prepared from NR/PS/PPy blends increased as the composition of PPy nanoparticles was increased, which were in the range of 8.9 × 10^?8 – 2.89 × 10^?4 S/cm. Thermal stability of the blends increased as the content of PPy was increased, as shown by TGA thermograms. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

The interaction of hydrogen sulfide with lead- and barium–cadmium–zinc-stabilized poly(vinyl chloride)

Poly(vinyl chloride) polymers stabilized with tribasic lead sulfate discolor upon exposure to hydrogen sulfide gas as a result of lead sulfide formation. The discoloration occurs for samples in both cord and sheet forms and is shown to be a function of total H₂S exposure, reaching a limiting value that is determined by the amount of lead stabilizer used in the polymer formulation. The permeation and diffusion constants for H₂S through PVC stabilized with tribasic lead sulfate and with a liquid Ba–Cd–Zn formulation are found to be P_Pb = (6.0 ± 0.2) × 10^?9, P_BaCdZn = (5.2 ± 0.2) × 10^?9 (both in cm³ gas?cm film/cm² area?sec?cm Hg), D_Pb = (1.3 ± 0.2) × 10^?7 cm²/sec, and D_BaCdZn = (6.4 ± 0.6) × 10^?8 cm²/sec, all measured at 21°C. The stabilizing efficiencies of the formulations were assessed by HCl evolution measurements, which show that exposure to H₂S decreases the initial polymer stability for both Pb-stabilized and Ba–Ca–Zn-stabilized formulations. Protection of stabilized PVC formulations from diffusing hydrogen sulfide is thus advisable for long-term stability as well as for color integrity.     

Investigation of crystallization behavior in dynamically vulcanized EPDM–nylon copolymer blends

A thermoplastic vulcanizate (TPV) of a ethylene–propylene–diene terpolymer (EPDM) and nylon copolymer (PA) was prepared by dynamic vulcanization. Maleic anhydride (MAH)–grafted EPDM (EPDM–g–MAH), MAH‐grafted EPR (EPR–g–MAH), and chlorinated polyethylene (CPE) were used as compatibilizers. The effect of dynamic vulcanization and compatibilizer on the crystallization behavior of PA was investigated. Differential scanning calorimeter measurement results showed no pronounced shift in the crystallization temperature for PA in EPDM–PA TPV compared to that for PA in the neat state, whereas the crystallization temperature increased after adding compatibilizer. The decrease in the crystallinity of TPVs was a result of the crystallization occurring in confined spaces between rubber particles. The equilibrium melting temperature (Tm⁰) of the PA copolymer was measured and was determined to be 157°C. The isothermal crystallization kinetics of PA in the neat and TPV states also was investigated. The crystallization rate was highest in the compatibilized TPV and lowest in the neat PA, whereas it was intermediate in the uncompatibilized TPV unvulcanized blends. Compared with unvulcanized EPDM–PA blends, the dynamic vulcanization process seemed to cause an obvious increase in the crystallization rate of the PA copolymer, especially when a suitable compatibilizer was used. This occurred because the dynamic vulcanization introduced fine crosslinked rubber particles that could act as heterogeneous nucleating centers. In addition, the use of a suitable compatibilizer permitted the formation of finely dispersed vulcanized rubber particles and therefore increased the density of the nucleating centers. The complex morphology of the blends was investigated by atomic force microscopy to evaluate the effect of compatibilizer on the size of the dispersed rubber particles. Compared with the morphology of TPVs with the same dosage of EPDM–g–MAH compatibilizer, the morphology of TPVs using EPR–g–MAH as compatibilizer showed much smaller dispersed rubber particles, which may have contributed to the higher crystallization rate. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 824–829, 2003     

Synthesis,Characterization and Conducting Properties of Nanocomposites of Intercalated 2-Aminophenol with Aniline in Sodium-Montmorillonite

A simple method was used to synthesize poly(2-aminophenol), poly(2-aminophenol-co-Aniline) and polyaniline nanocomposites with sodium-montmorillonite (Na-M) using in situ intercalative oxidative polymerization. Morphology and thermal properties of the synthesized nanocomposites were examined by transmission electron microscopy (TEM) and thermogravimetric analysis. The thermal analysis shows an improved thermal stability of the nanocomposites in comparison with the pure poly(2-aminophenol). The intercalation of polymers into the clay layers was confirmed by X-ray diffraction studies, TEM images and FTIR spectroscopy. In addition, the room temperature conductivity values of these nanocomposites varied between 8.21 × 10^?5 and 6.76 × 10^?4 S cm^?1. The electrochemical behavior of the polymers extracted from the nanocomposites, has been analyzed by cyclic voltammetry. Good electrochemical response has been observed for polymer films; the observed redox processes indicate that the polymerization into Na-M produces electroactive polymers.     

Preparation and characterization of a methyl methacrylate/ethyl acrylate/acrylic acid terpolymer to improve the homogeneity of ethylene–propylene–diene monomer rubber/poly(vinyl chloride) blends

The emulsion terpolymerization of methyl methacrylate (MMA), ethyl acrylate (EA), and acrylic acid (AA) was carried out under a nitrogen atmosphere at 70°C. The final terpolymer conversion was determined gravimetrically. The synthesized MMA–EA–AA terpolymer was characterized with ¹H‐NMR spectroscopy, thermal analysis, and gel permeation chromatography. Glass‐transition temperatures of the MMA–EA–AA terpolymer were determined with a differential scanning calorimeter. Ethylene–propylene–diene monomer rubber (EPDM)/poly(vinyl chloride) (PVC) blends were prepared with different blend ratios (10/90, 20/80, 30/70, 40/60, and 50/50) in the presence and absence of MMA–EA–AA as a compatibilizer. The morphology of those blends was examined with the aid of a scanning electron microscope. The scanning electron micrographs in the presence of the MMA–EA–AA terpolymer illustrated the disappearance of the macroscale phase separation of EPDM/PVC blends as a result of the incorporation of MMA–EA–AA into that blend, indicating an improvement of the homogeneity. The mechanical properties of the EPDM/PVC blend films and the dielectric properties of the melt blends were investigated. The swelling behavior of the cured blends in the brake fluid was also discussed. The results illustrated that the mechanical properties, the weight swelling values, and the dielectric constant values showed linear behavior versus the blend ratios after the incorporation of the terpolymer. However, those values showed deviations from linearity in the absence of the terpolymer. That, in turn, ensured the results obtained with the scanning electron microscope. The results reveal that the MMA–EA–AA terpolymer prepared can be used successfully to improve the homogeneity of EPDM/PVC blends used in hose and oil seal applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Phase morphology and thermomechanical analysis of poly(styrene‐co‐acrylonitrile)/ethylene–propylene–diene monomer blends: Uncompatibilized and reactively compatibilized blends with two mixing sequences

The phase morphology developing in immiscible poly(styrene‐co‐acrylonitrile) (SAN)/ethylene–propylene–diene monomer (EPDM) blends was studied with an in situ reactively generated SAN‐g‐EPDM compatibilizer through the introduction of a suitably chosen polymer additive (maleic anhydride) and 2,5‐dimethyl‐2,5‐di‐(t‐butyl peroxy) hexane (Luperox) and dicumyl peroxide as initiators during melt blending. Special attention was paid to the experimental conditions required for changing the droplet morphology for the dispersed phase. Two different mixing sequences (simple and two‐step) were used. The product of two‐step blending was a major phase surrounded by rubber particles; these rubber particles contained the occluded matrix phase. Depending on the mixing sequence, this particular phase morphology could be forced or could occur spontaneously. The composition was stabilized by the formation of the SAN‐g‐EPDM copolymer between the elastomer and addition polymer, which was characterized with Fourier transform infrared. As for the two initiators, the blends with Luperox showed better mechanical properties. Scanning electron microscopy studies revealed good compatibility for the SAN/EPDM blends produced by two‐step blending with this initiator. Dynamic mechanical thermal analysis studies showed that the two‐step‐prepared blend with Luperox had the best compatibility. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Radiation processing of polyolefin blends. I. Crosslinking of EPDM–PP blends

Radiation crosslinking of polymer blends containing the ethylene–propylene terpolymer (EPDM) and polypropylene (PP) was studied. Four binary systems with mixing ratios of 80/20, 60/40, 40/60, and 20/80 w/w and the individual components were γ‐processed. The development of the gel content formed in irradiated blends proved that the increase in PP concentration generated an increasing insoluble fraction. A linear dependence of the gel fraction on PP concentration was found. The optimal dose range for the efficient crosslinking of all EPDM/PP blends was 40–180 kGy. The use of PP customer waste was also examined. The thermal stability of the studied mixtures was assessed in order to state the contribution of the components to the radiation compatibilization of investigated polymers. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 982–987, 2000     

Thermooxidative degradation of poly(vinyl chloride)/acrylonitrile–butadiene–styrene blends

The thermal degradation process of poly(vinyl chloride)/acrylonitrile–butadiene–styrene (PVC/ABS) blends was investigated by dynamic thermogravimetric analysis in the temperature range 50–650°C in air. The thermooxidative degradation of PVC/ABS blends of different composition takes place in three steps. In this multistep process of degradation the first step, dehydrochlorination, is the most rapid. The maximal rate of dehydrochlorination for the PVC blends containing up to 20% ABS-modifier is achieved at average conversions of 23.5–20.0%, i.e., at 13.5% for the 50/50 blend. The apparent activation energies (E = 103–116 kJ mol⁻¹) and preexponential factors (Z = 2.11 × 10⁹−3.45 × 10¹⁰min⁻¹) for the first step of the degradation process were calculated after the Kissinger method. © 1996 John Wiley © Sons, Inc.