Graft copolymerization of methyl methacrylate and other vinyl monomers onto cotton fabric using ferrous cellulose thiocarbonate–N-bromosuccinimide redox initiation system

The cellulose thiocarbonate, in the fabric from, was treated first with a freshly prepared ferrous ammonium sulphate (FAS) solution. The sotreated fabric formed, with N-bromosuccinimide (NBS), an effective redox system capable of initiating grafting of methyl methacrylate (MMA) and other vinyl monomers onto the cotton fabric. The effect of the polymerization conditions the polymer criteria, namely, graft yeild, homopolymer, total conversion, and grafting efficiency, was studied. These polymer criteria were found to depend extensively upon concentrations of the Fe²⁺ ion (activator), NBS (initiator), and MMA; pH of the polymerization medium, and duration and temperature of polymerization. Based on detailed investigation of these factors, the optimal conditions for grafting were as follows: Fe²⁺, 1 × 10⁻³ mol/L; NBS, 1 × 10⁻² mol/L; MMA, 4%; pH, 2: polymerization time, 150 min; polymerization temperature, 60°C; material/liquor ratio, 1: 100. Under these optimal conditions, the rates of grafting of different vinyl monomers were in the following sequence: methyl methacrylate ≫ methyl acrylate > acrylonitrile. Other vinyl monomers namely, acrylic acid, and methacrylic acid have no ability to be grafted to the cellulosic fabric using the said redox system. A tentative mechanism for the polymerization reaction is suggested. © 1996 John Wiley & Sons, Inc.     

Grafting of acrylic monomers onto cotton fabric using an activated cellulose thiocarbonate–azobisisobutyronitrile redox system

The feasibility of a cellulose thiocarbonate–azobisisobutyronitrile (AIBN) initiation system to induce graft copolymerization of methyl methacrylate (MMA) and other acrylic monomers onto cotton fabric was investigated. Other acrylic monomers were acrylic acid, acrylonitrile, and methyl acrylate. The initiation system under investigation was highly activated in the presence of a metal‐ion reductant or a metal‐ion oxidant in the polymerization medium. A number of variables in the grafting reaction were studied, including AIBN concentration, pH of the polymerization medium, nature of substrate, monomer concentration, duration and temperature of polymerization, and composition of the solvent/water polymerization medium. The solvents used were methanol, isopropanol, 1,4‐dioxane, cyclohexane, benzene, dimethyl formamide, and dimethyl sulfoxide. There were optimal concentrations of AIBN (5 mmol/L), MMA (8%), Fe²⁺ (0.1 mmol/L), Mn²⁺ (8 mmol/L), and Fe³⁺ (2 mmol/L). A polymerization medium of pH 2 and temperature of 70°C constituted the optimal conditions for grafting. The methanol/water mixture constituted the most favorable reaction medium for grafting MMA onto cotton fabric by using the Fe²⁺–cellulose thiocarbonate–AIBN redox system. MMA was superior to other monomers for grafting. The unmodified cotton cellulose showed very little tendency to be grafted with MMA compared with the chemically modified cellulosic substrate. A tentative mechanism for the grafting reaction was proposed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1261–1274, 2004     

Grafting of Methacrylic Acid and Other Vinyl Monomers Onto Cotton Fabric Using Ce (IV) Ion–Cellulose Thiocarbonate Redox System

Graft copolymerization of methacrylic acid (MAA) onto cotton fabric using tetravalent ceric ion (Ce^IV)–cellulose thiocarbonate redox system was investigated under different conditions including pH of the polymerization medium (1–4), ceric sulphate (CS) concentration (4–20 m mole/l), MAA concentration (1%–6%), polymerization time (1/4–2 h) and polymerization temperature (0–70°C). Results obtained indicated that the optimal conditions for MAA grafting onto cotton fabric using the said redox system consisted of: [CS], 20 m mole/l; [MAA], 4%; pH of the medium, 2; time, 2 h; temperature, 60 °C keeping a material-to-liquor ratio at 1:0. Applying optimized conditions to different monomers, namely, acrylic acid (AA), methacrylic acid (MAA), acrylamide (Aam), acrylonitrile (AN), butyl acrylate (BuA), methyl methacrylate (MMA), ethyl methacrylate (EMA) and glycidyl methacrylate (GMA) onto the same substrate, the rates of grafting followed the order:

Pentavalent vanadium ion–cellulose thiocarbonate redox-system induced grafting of methyl methacrylate and other vinyl monomers onto cotton fabric

Cellulose thiocarbonate was prepared by reacting cotton cellulose fabric with carbon disulphide in the presence of sodium hydroxide. The treated fabric formed, with pentavalent vanadium ion, an effective redox system capable of initiating grafting of methyl methacrylate (MMA) and other monomers no+o the cotton fabric. The dependence of grafting on vanadium concentration, pH of the polymerization medium, temperature and duration of grafting, nature and concentration of monomer, and solvent/water ratio was studied. The results indicated that increasing the pentavalent vanadium (V^v) concentration up to 60 mmol/L was accompanied by enhancement in the rate of grafting; the latter was not affected by further increase in V^v concentration. Maximum grafting yield was achieved at pH 2; grafting fell greatly at higher pH. The rate of grafting followed the order: 70° > 60° > 50°C. The graft yield increased significantly by increasing the MMA concentration from 0.5 to 5%. Of the solvents studied, n-propanol and isopropanol enhanced the grafting rate provided that a solvent/water ratio of 5 : 95 was used; a higher solvent ratio decreased the magnitude of grafting. Other solvents, namely, methanol, ethanol, n-butanol, and acetone, in any proportion, decreased the rate of grafting. With the monomer used, the graft yield followed the order: methyl methacrylate > methyl acrylate > methacrylic acid > ethyl methacrylate > acrylic acid. Also reported was a tentative mechanism for vinyl-graft copolymerization onto cotton fabric using cellulose thiocarbonate-V^v. © 1993 John Wiley & Sons, Inc.     

Cotton fabric graft copolymerization using microwave plasma. I. Universal attenuated total reflectance–FTIR study

The effect of microwave plasma on lightweight cotton fabric was investigated. N₂‐plasma, O₂‐plasma, and Ar‐plasma were obtained using a microwave generator at 2.45 GHz under vacuum. The universal attenuated total reflectance–Fourier transform infrared (UATR–FTIR) instrument was used to monitor the changes created after N₂‐, O₂‐, and Ar‐plasma treatments. The exposure of cotton fabrics to the plasma for 240 s with a microwave power of 500 W was sufficient to create active carbonyl groups, as shown by the presence of a peak around 1725 cm^?1 in the FTIR spectra of the treated cotton fabrics. Ar‐plasma was found to generate more active groups than N₂‐ and O₂‐plasmas. The active centers created within the cellulose chains were used to initiate copolymerization reactions with vinyl monomers to impart hydrophobic character to lightweight cotton fabric. The efficiency of the grafting process and the presence of grafted monomers on fabric surface were confirmed using UATR–FTIR. Testing of treated fabric revealed that excellent water repellency was obtained. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 145–154, 2004     

Graft copolymerization of methyl methacrylate (MMA) onto silk using potassium peroxydiphosphate–cysteine (PP–Cys) redox system

Poly(methyl methacrylate) has been grafted onto mulberry silk in an aqueous medium by using potassium peroxydiphosphate–cysteine (PP–Cys) redox initiator. Various effects upon grafting such as concentration of cysteine, concentration of peroxydiphosphate, concentration of monomer, concentration of sulfuric acid, and temperature were studied. At a low range of cysteine concentration (6.25 × 10^?4 mol/L), the rate of polymerization R_p (%/s) is proportional to cysteine concentration and the exponent is calculated to be 0.8. The monomer exponent is calculated to be unity up to the concentration of 65.72 × 10^?2 mol/L. From the Arrhenius plot of log R_p vs. 1/T (T = absolute temperature) the overall activation energy is computed to be 15.19 kcal/mol. A suitable kinetic path has been pictured and a rate expression has been derived.     

A novel method for vinyl grafting onto cotton fabric using ceric-cellulose thiocarbonate redox system

Treatment of cotton fabric with carbon disulphide in presence of NaOH resulted in cellulose thiocarbonate. The latter formed a complex when treated with ceric ammonium nitrate (CAN). After being thoroughly washed, the Ce^IV cellulose thiocarbonate was capable of initiating vinyl graft polymerization onto cotton fabric without homopolymer formation. The graft yield obtained with methyl methacrylate was found to increase by increasing CAN from zero to 50 mmol/l at temperatures from 60 to 80°C. Grafting was greatly favoured at pH 2; alkaline pH offset grafting. Incorporation of up to 7% of methanol, ethanol, or isopropanol in the aqueous polymerization medium enhanced grafting significantly with the certainty that the highest graft yield was obtained with isopropanol; using higher alcohol percentages decreased grafting. The rate of grafting showed an initial fast rate followed by a slower rate; 60 minutes reaction time proved appropriate for grafting irrespective of the condition used. In addition to methyl methacrylate the ability of Ce^IV-cellulose thiocarbonate to induce grafting of acrylonitrile and acrylamide was also examined. The rate of grafting followed the order methyl methacrylate > acrylonitrile > acrylamide.     

Synthesis and characterization of cellulose ion exchangers. I. Polymerization of glycidyl methacrylate,dimethylaminoethyl methacrylate,and acrylic acid with cotton cellulose using thiocarbonate-H2O2 redox system

Polymerization of glycidyl methacrylate (GMA), dimethylaminoethyl methacrylate (DMAEMA) and acrylic acid (AA) with cotton fabric using a cellulose thiocarbonate-hydrogen peroxide redox system as an initiator was investigated under different conditions. This includes the nature and concentration of the initiator and monomer, polymerization time and temperature, and liquor ratio. The percent of polymer add-on is generally favored by increasing monomer and H₂O₂ concentration, as well as duration and temperature of the polymerization, but with the certainty that the percent of polymer add-on follows the following order: GMA > DMAEMA > AA. On the other hand, the percent of polymer add-on increases by decreasing the liquor ratio. Incorporation of Fe²⁺ or Cu²⁺ ion in the polymerization system enhances the percent of polymer add-on significantly. Replacing the H₂O₂ by other oxidants such as Cr⁶⁺ or Mn⁴⁺ is made, and the capability of such cations to expedite polymerization of the said monomers with cotton cellulose is studied. Also studied is the synthesis of cation exchanger via reaction of poly(GMA)-cellulose copolymer with hexamethylene tetramine. Furthermore, the ion exchange characteristics of the cellulosic copolymers obtained with this as well as with other monomers are reported. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 1029–1037, 1997     

Studies of graft copolymerization of acrylamide onto guar gum using peroxydiphosphate–metabisulphite redox pair

The effect of reaction conditions on the grafting parameter during grafting of acrylamide onto guar gum has been studied using peroxydiphosphate–metabisulphite redox pair at 35 °C. Grafting ratio, efficiency and add‐on all increase as the concentrations of peroxydiphosphate and acrylamide increase up to 40.0 × 10⁻³ mol dm⁻³ and 40.0 × 10⁻² mol dm⁻³, respectively. It has been observed that the optimum concentrations of metabisulphite and guar gum for obtaining high grafting ratio, efficiency, add‐on and conversion are 6.0 × 10⁻³mol dm⁻³ and 91.7 × 10⁻² g dm⁻³, respectively. © 2000 Society of Chemical Industry     

Modification of cellulosic fabrics to impart flame retardancy properties

Graft copolymerization of dimethylaminoethyl methacrylate (DMAEMA) onto cotton‐cellulose in the fabric form was carried out using a cellulose‐thiocarbonate‐ammonium persulphate redox initiation system. Effects of the concentration of the monomer, effect of liquor ratio, grafting time, and temperature were studied. The results point out the following important aspects of flame retardation of cellulose fabrics. (1) The graft polymerization of DMAEMA can improve the flame retardant properties of cellulose fabrics. (2) Tertiary amine grafted to cellulosic fabrics is suitable for nitrogen compounds that can effectively operate as synergists. The flame retardant properties of the poly‐DMAEMA‐ grafted‐phosphorylated cellulosic materials were found to be excellent even after 25 dry clean washings. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Grafting of cellulose–thiocarbamate with vinyl monomers: Antimicrobial activity

Grafting of vinyl monomers onto cellulose-thiocarbamate was carried out using ceric ammonium sulfate (CAS) as an initiator. The graft yield was found to depend on the amount of thiocarbamate groups, initiator, and monomer concentrations as well as temperature. The graft yield increased with increasing (CAS) concentration. The reactivity of vinyl monomers studied followed the order ethyl acrylate>acrylonitrile. A comparison between the graft yields obtained with the modified cullulose indicated that cellulose thiocarbamates having less than 1.1% nitrogen showed lower graft yields than the unmodified cellulose. Above this, cellulose thiocarbamate was much more amenable to grafting than the unmodified cellulose. The grafted cellulose thiocarbamates exhibited high antifungal activity and had no effect on gram-negative, gram-positive bacteria and yeast. The maximum zone of inhibition was obtained after grafting with 2 h which resulted in 43 and 50% add-on polymer in the cases of acrylonitrile and ethyl acrylate, respectively. Grafted cellulose thiocarbamates with acrylonitrile had higher potency for antifungal activity than that grafted with ethyl acrylate.     

Grafting vinyl monomers onto wool fibers. VIII. Graft copolymerization of methyl methacrylate onto wool using peroxydiphosphate–fructose redox system

The graft copolymerization of methyl methacrylate onto wool fibers was investigated in aqueous solution using the peroxydiphosphate–fructose redox system. The rate of grafting was determined by varying monomer, acidity of the medium, temperature, nature of wool, and reaction medium. The graft yield increases with increase in peroxydiphosphate concentration. With increase in concentration of fructose up to 7.5 × 10^?4 mole/l., there is a significant increase in graft yield; and with further increase in concentration of fructose the graft yield decreases. The graft yield increases with increase in monomer concentration up to 65.72 × 10^?2 mole/l. and decreases thereafter. The grafting is considerably influenced by chemical modification prior to grafting. The effect of acid, temperature, and solvent on the rate of grafting has been investigated and a suitable rate expression has been derived.     

Modification of dextran through the grafting of N‐vinyl‐2‐pyrrolidone and studies of physicochemical phenomena in terms of metal‐ion uptake,swelling capacity,and flocculation

The optimum conditions for grafting N‐vinyl‐2‐pyrrolidone onto dextran initiated by a peroxydiphosphate/thiourea redox system were determined through the variation of the concentrations of N‐vinyl‐2‐pyrrolidone, hydrogen ion, potassium peroxydiphosphate, thiourea, and dextran along with the time and temperature. The grafting ratio increased as the concentration of N‐vinyl‐2‐pyrrolidone increased and reached the maximum value at 24 × 10^?2 mol/dm³. Similarly, when the concentration of hydrogen ion increased, the grafting parameters increased from 3 × 10^?3 to 5 × 10^?3 mol/dm³ and attained the maximum value at 5 × 10^?3 mol/dm³. The grafting ratio, add‐on, and efficiency increased continuously with the concentration of peroxydiphosphate increasing from 0.8 × 10^?2 to 2.4 × 10^?2 mol/dm³. When the concentration of thiourea increased from 0.4 × 10^?2 to 2.0 × 10^?2 mol/dm³, the grafting ratio attained the maximum value at 1.2 × 10^?2 mol/dm³. The grafting parameters decreased continuously as the concentration of dextran increased from 0.6 to 1.4 g/dm³. An attempt was made to study some physicochemical properties in terms of metal‐ion sorption, swelling, and flocculation. Dextran‐g‐N‐vinyl‐2‐pyrrolidone was characterized with infrared spectroscopy and thermogravimetric analysis. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Cerium–initiated Polymerisation of Some Vinyl Compounds in Polyamide Fibres

Several vinyl polymers have been grafted onto nylon 6. 6 with ceric salts as initiators. Some factors influencing the polymerisation of acrylic acid have been examined in detail, and evidence obtained that the products are true graft copolymers. Grafting of both 2–vinylpyridine and 4–vinylpyridine is slow from solutions in dilute sulphuric acid or nitric acid, but rapid from perchloric acid. Slow diffusion of initiator into polyamide fibres is apparently responsible for a non–uniform distribution of polymer sometimes observed. Nylon 6. 6 is oxidised slowly, but extensively, by cerie salts and the reaction is accelerated by oxygen. Analyses of the products are consistent with oxidation at methylene groups adjacent to the amide nitrogen rather than at amine end–groups. A paradox, thatdinitrophenylation renders nylon less susceptible to grafting of poly(acrylic acid), but not to oxidation by eerie salts, is tentatively explained. The surface electrical resistivity of nylon fabric is not lowered by grafted polyacrylamide or its N–alkyl derivatives, whilst salts of poly(acrylic acid) and poly(vinylpyridines) impart only a temporary lowering. Poly(1–rnethyl–4–vinylpyridinium) perchlorate was more permanently effective. Attempts to polymerise some potentially antistatic betaine–type monomers in nylon were unsuccessful.     

Grafting of a styrene–acrylonitrile binary monomer mixture onto cellulose extracted from pine needles

In an attempt to develop new reactive membrane materials, we graft‐copolymerized styrene (Sty) and acrylonitrile (AN) onto cellulose extracted from pine needles by a chemical initiation method. The optimum grafting reaction conditions for Sty onto cellulose were earlier evaluated as [Sty] = 656.25 mmol/L and [potassium persulfate–ferrous ammonium sulfate] = 146.3:12.75mmol/L in 20 mL of H₂O with a reaction time of 3 h and a reaction temperature of 60°C for 1 g of cellulose. Under these conditions, Sty was graft‐copolymerized with AN at five different concentrations of the latter. Grafting parameters and different rates of concentration were evaluated. The effects of additives such as ZnCl₂, LiNO₃, and Cu(NO)₃ were studied at the best comonomer concentration of Sty–AN. In the presence of ZnCl₂, Sty–AN graft‐copolymerized in an alternate way, thus, making it evident that ZnCl₂ coordinated to form a “complexomer,” or complex of monomers [Sty^?AN⁺…ZnCl₂], of two monomers. Evidence of the structural characteristics of grafted chains were provided by characterization with elemental analysis, thermal analysis, and Fourier transform infrared spectroscopy. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2000–2007, 2002     

Gamma radiation-induced graft copolymerization of divinylbenzene onto cellulose fabric

The extent of DVB grafting onto cellulose fabric increases with total gamma radiation dose up to 10–15 kGy while it decreases with the radiation dose rate. A quantitative analysis of DVB grafting has been attempted by means of IR spectroscopy using the baseline method. Characteristic bands were selected in the spectra of copolymers, namely, the cellulose band at 1160 cm^?1 and DVB band at 798 cm^?1. The former band decreased and the latter increased with the degree of copolymerization, and the values were in accordance with the calibration straight line. An attempt to graft DVB onto cotton fabric previously grafted with styrene showed greater extent of copolymerization than with pure fabric.     

Thermal degradation of celluloses and their vinylic copolymers by thermogravimetric analysis

Thermal degradation of unmercerized and mercerized cotton cellulose with different % NaOH solutions and grafted vinylic copolymers with different mixtures of vinyl acetate‐methylacrylate¹ have been studied by thermogravimetric analysis (TGA) in nitrogen between 25 and 600°C at different heating rates. The differences between unmercerized and mercerized samples are related to structural differences between cellulose‐I (native) and cellulose‐II. The grafted cellulosic vinylic copolymers have shown that their thermal stability depends upon the cellulosic substrate and the grafting percentage. From our results, it can be deduced that it is possible to prepare the cellulosic materials with good thermal stability, short degradation temperature interval, and various residues at the end of degradation. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 201–209, 1999     

Synthèse et caractérisation de copolymères cellulose–poly(méthacrylate de méthyle): Greffage par le système acide de Caro–ion Fe3+

Methyl methacrylate was grafted onto cellulose using Caro's acid-Fe³⁺ system as initiator. The effect of grafting time, ferric ion concentration, and cellulose/monomer ratio, on the per cent grafting, was investigated. From studies of the reaction mechanism with model compounds it was postulated that the grafting did not occur at the 1,2-glycol units or at the hemiacetal unit in the end of the cellulose molecule. Concurrent degradation of the cellulose during the graft copolymerization was examined. A linear relationship between the per cent grafting and the number of cellulosic broken chains by hydrolysis was found, from which it would seem that the structure of the graft copolymer was of block-type. The structure of the graft copolymers was also studied by determination of the molecular weights of the grafted PMMA branches, after hydrolysis of the cellulosic backbone. In all cases, independently of reaction conditions, the molecular weights of the grafted branches were very high and their number low. The number of graft branches per cellulose chain was calculated from the per cent grafting, the molecular weights of the PMMA branches and of the cellulosic backbone. This number was compared with the number of cellulosic bonds broken during grafting.     

Synthesis and characterization of N‐vinyl pyrrolidone and cellulosics based functional graft copolymers for use as metal ions and iodine sorbents

To develop cost effective and eco friendly polymeric materials for enrichment and separation technologies, 1‐vinyl‐2‐pyrrolidone (N‐VP) was graft copolymerized onto cellulose, extracted from pine needles. Optimum conditions have been evaluated for the grafting of N‐VP onto cellulose and at these conditions it was also grafted onto cellulose phosphate, hydroxypropyl cellulose, cyanoethyl cellulose, and deoxyhydrazino cellulose. At the optimum grafting conditions for N‐VP, it was also cografted with maleic anhydride. Kinetics of radiochemical graft copolymerization has been studied and evaluation of the polymerization and grafting parameters as percent grafting, percent grafting efficiency, rate of polymerization, homopolymerization, and graft copolymerization have been evaluated. Graft copolymers have been characterized by elemental analysis, FTIR, and swelling studies. An attempt has been made to study sorption of some metal ions such as Fe²⁺ and Cu²⁺ and iodine on select graft copolymers to investigate selectivity in metal ion sorption and iodine sorption as a function of structural aspects of the functionalized graft copolymers to find their end uses in separation and enrichment technologies. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 373–382, 2005     

Polymerization of glycidyl methacrylate,methacrylic acid,acrylamide and their mixtures with cotton fabric using fe2+-thioureadioxide-H2O2 redox system

Polymerization of glycidyl methacrylate (GMA), methacrylic acid (MAA), acrylamide (Aam) and their binary mixtures with cotton cellulose fabrics using Fe²⁺-thioureadioxide-H₂O₂ redox system was investigated under a variety of conditions. While temperatures of 50, 80, 65, and 95°C constituted the optimal polymerization temperature for GMA, MAA, Aam and GMA/MAA (8:2), respectively, maximum polymerization of GMA/MAA (2:8), Aam/MAA (8:2) and Aam/MAA (2:8) occurred at 75°C. The polymerization reaction proceeded initially very fast then levelled off irrespective of the monomer or monomer mixtures used. However, the magnitude of the polymer add-on at levelling off of polymerization followed the order GMA > GMA/MAA (2:8) ≥ GMA/MAA (8:2) > Aam/MAA (2:8) ≥ MAA ≥ Aam/MAA (8:2) > Aam. The polymer add-on enhanced by increasing the H₂O₂ concentration up to a certain limit and then decreased. The same situation was encountered with respect to thioureadioxide concentration. The involvement of the epoxy ring of GMA with MAA during polymerization of their mixture with cellulose occurred only at a higher ratio of GMA in the mixture. Also a significant contribution of Aam in the polymer add-on obtained with a Aam/MAA mixture could only be achieved at a higher ratio of Aam in this mixture.