Biodegradability of poly(ethylene terephthalate) copolymers with poly(ethylene glycol)s and poly(tetramethylene glycol)

Poly(ethylene terephthalate) copolymers were prepared by melt polycondensation of dimethyl terephthalate and excess ethylene glycol with 10–40mol% (in feed) of poly(ethylene glycol) (E) and poly(tetramethylene glycol) (B), with molecular weight (MW) of E and B 200–7500 and 1000, respectively. The reduced specific viscosity of copolymers increased with increasing MW and content of polyglycol comonomer. The temperature of melting (T_m), cold crystallization and glass transition (T_g) decreased with the copolymerization. T_m depression of copolymers suggested that the E series copolymers are the block type at higher content of the comonomer. T_g was decreased below room temperature by the copolymerization, which affected the crystallinity and the density of copolymer films. Water absorption increased with increasing content of comonomer, and the increase was much higher for E1000 series films than B1000 series films. The biodegradability was estimated by weight loss of copolymer films in buffer solution with and without a lipase at 37°C. The weight loss was enhanced a little by the presence of a lipase, and increased abruptly at higher comonomer content, which was correlated to the water absorption and the concentration of ester linkages between PET and PEG segments. The weight loss of B series films was much lower than that of E series films. The abrupt increase of the weight loss by alkaline hydrolysis is almost consistent with that by biodegradation.     

Poly(butylene terephthalate)/poly(ethylene glycol) blends with compatibilizers

Polymer blend systems offer a versatile approach for tailoring the properties of polymer materials for specific applications. In this study, we investigated the compatibility of polybutylene terephthalate (PBT) and poly(ethylene glycol) (PEG) blends processed using a twin-screw extruder, with the aim of enhancing their compatibility. Phthalic anhydride (PAn) and phthalic acid (PAc) were used as potential compatibilizers at different concentrations to improve interfacial interactions between PBT and PEG. Blend morphologies were characterized using scanning electron microscopy, which revealed improved interfacial compatibility and reduced phase separation with the incorporation of small amounts of PAn and PAc. Differential scanning calorimetry analysis indicated changes in the melting temperature (T_m) and glass transition temperature (T_g) of the blends owing to the compatibilizing effects of PAn and PAc. Dynamic mechanical analysis further corroborated the influence of the compatibilizers on the T_g and viscoelastic behavior. Thermogravimetric analysis demonstrated enhanced thermal stability with the addition of either PAn or PAc. Rheological measurements indicated an increase in complex viscosity with increasing compatibilizer content, indicating improved compatibility. The degradation point (T_d) of PBT/PEG blend increased from 158 to 200 and 319°C with the incorporation of 5 phr PAn and 2 phr PAc, respectively. Mechanical properties, including tensile strength, Young's modulus, and Izod impact strength, were evaluated. For instance, the tensile strength of PBT/PEG blend was enhanced from 43.5 to 48.7 and 49.7 MPa by incorporating 5 phr PAn and 2 phr PAc, respectively. However, the impact strength of PBT/PEG blend increased from 3.0 to 4.3 and 4.2 kJ/m² with the addition of 1 phr PAn and 1 phr PAc, respectively. The findings demonstrated that adding 5 phr PAn or 2 phr PAc to the PBT/PEG blends was advantageous, achieving a harmony of performance benefits and compromises. Rheological observations contributed significantly to the mechanical and thermal properties. Overall, the study highlights the significance of utilizing PAn and PAc as effective compatibilizers for enhancing the properties of PBT/PEG blends, making them potential candidates for various applications.     

Thermoplastic hydrogel based on pentablock copolymer consisting of poly(γ‐benzyl L‐glutamate) and poloxamer

A thermoplastic hydrogel based on a pentablock copolymer composed of poly(γ‐benzyl L ‐glutamate) (PBLG) and poloxamer was synthesized by polymerization of BLG N‐carboxyanhydride, which was initiated by diamine‐terminated groups located at the ends of poly(ethylene oxide) (PEO) chains of the poloxamer, to attain a new pH‐ and temperature‐sensitive hydrogel for drug delivery systems. Circular dichroism measurements in solution and IR measurements in the solid state revealed that the polypeptide block existed in the α‐helical conformation, as in the PBLG homopolymer. The intensity of the wide‐angle X‐ray diffraction patterns of the polymers depended on the poloxamer content in the copolymer and showed basically similar reflections to the PBLG homopolymer. The melting temperature (T_m) of the poloxamer in the copolymer was reduced with an increase of the PBLG block in comparison with the T_m of the poloxamer, which is indicative of a thermoplastic property. The water contents of the copolymers were dependent on the poloxamer content in the copolymers, for example, those for the GPG‐2 (48.7 mol % poloxamer) and GPG‐1 (57.5 mol % poloxamer) copolymers were 31 and 41 wt %, respectively, indicating characteristics of a polymeric hydrogel. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2649–2656, 2003     

Polyurethane elastomers based on molecular weight advanced poly(ethylene ether carbonate) polyols. IV. Effects of poly(propylene glycol) modified diols

A series of polyurethane elastomers with a (A{BC}_m)n type of structure have been prepared and characterized based on poly(propylene glycol) modified poly(ethylene ether carbonate) polyols, where the poly(propylene glycol) content and block length were varied systematically. Strength and modulus properties showed a marked dependence on modifier level and exhibited synergistic property improvements at 25–50 wt % modifier, relative to both unmodified poly(ethylene ether carbonate) diol and poly(propylene glycol) controls. DMA results indicated an increased modulus for the modified plaques throughout the rubbery plateau region, with higher thermal dissociation temperatures. Excellent organic solvent resistance was maintained with 25–50 wt % poly(propylene glycol) modification in the soft segment. Chemical structure of the polyurethane elastomers was established by proton and ¹³C-NMR spectroscopy. The morphology of these modified polyurethanes appears to be quite complex. Since the modified soft segments are block copolymers of blocks with a tendency toward immiscibility, some microphase separation within the soft segment domains of the polyurethane polymers might be expected. The soft segment T_g is highest where properties are maximized, suggesting changes in phase mixing. © 1992 John Wiley & Sons, Inc.     

Viscoelastic properties of poly(ethylene-co-styrene) copolymers

The viscoelastic properties of narrowly distributed linear poly(ethylene-co-styrene) copolymers with different mole fractions of styrene (x_S = 0–20.5 mol %) and molecular weights (M_w = 64–214 kg/mol) were analyzed in the molten state at different temperatures by means of oscillatory rheometry. Analyzing the thermorheological properties of the polymers, we found that the time temperature superposition principle is fulfilled. The corresponding shift factors follow up to 16.5 mol % of styrene units the Arrhenius behavior of neat polyethylene. For a styrene content of about 20 mol %, the polymers no longer crystallize and a transition from Arrhenius to WLF behavior of pure polystyrene was observed. The zero shear viscosity, η₀, of the polymers was derived from the mastercurves. The determination of the plateau modulus by the well-known tan δ-min criterion is not possible due to the beginning crystallization in the corresponding temperature range. An approximate calculation of this value is based on the characteristic relaxation time λ_x = 1/ω_x, corresponding to the crossover of G′ and G′. Indeed, the characteristic modulus G_px calculated as η₀/λ_x is a good approximation for the plateau modulus G_p. The viscosity–molecular weight and relaxation time–molecular weight scaling relations were established for three copolymers with different molecular weights and nearly the same styrene content. For both material parameters, the scaling exponent is around 3.4, confirming the linear architecture of the investigated polymers. The mixing rules describing the change of such material parameters like zero shear viscosity or plateau modulus independent of styrene content are of logarithmic linear character using the weight fraction of styrene units instead of the mole fraction. The relations found allow the prediction of melt state properties for polymers with arbitrary styrene content. In the future, when catalysts with sufficient activity for the synthesis of high styrene content copolymers are available, these predictions will have to be checked. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 65:209–215, 1997     

Rheological properties of syndiotacticity-rich ultrahigh molecular weight poly(vinyl alcohol) dilute solution

Viscoelastic behavior of the dilute solution of ultrahigh molecular weight syndiotactic poly(vinyl alcohol) (UHMW s-PVA)/dimethyl sulfoxide (DMSO)/water was investigated through rheological response. Below a critical temperature, the dynamic storage modulus (G′) of the solution became greater than the dynamic loss modulus (G″) and the viscoelastic exponent for G′ became smaller than that for G″ before macroscopic gelation, which indicates the evolution of viscoelastic solid properties at the sol state. Also, the loss tangent (tan δ) of the solution below the critical temperature increased with increasing frequency. Consequently, the dilute solution of UHMW s-PVA/DMSO/water showed the rheological behaviors as can be observed in general chemical or physical gel systems below the critical temperature. These results suggest that solid-like heterogeneity prevailed in the solution before macroscopic gelation with decreasing temperature. Such heterogeneity was considered as phase-separated domains attributed to spinodal decomposition. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 569–576, 2001     

Poly(acrylic acid–sodium styrene sulfonate) organogels: Preparation,characterization, and alcohol superabsorbency

Polymeric organogels based on acrylic acid and sodium styrene sulfonate (SSS) were synthesized and characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, dynamic mechanical thermal analysis (DMTA), and rheometrical analyses. The organogels exhibited medium alcohol absorbency because of counterion binding that formed in solvents with low dielectric constants. After acid treatment, the possibility of counterion binding was decreased, and the organogels achieved superabsorbency in alcohols, for example, about 80 and 50 g/g in methanol and ethanol, respectively. The superabsorbency was also measured in higher alcohols (i.e., n‐propanol and isopropyl alcohol) and polyols (i.e., ethylene glycol, propylene glycol, 1,3‐propanediol, and glycerol). The dielectric constant, viscosity, and structural features of the alcohols were investigated as important parameters determining the alcohol superabsorbency. DMTA of dried samples showed two glass‐transition temperatures (T_g's), that is, the matrix T_g and the complex T_g, which increased with increasing SSS content. The tan δ peak intensity increased after the acid treatment. With increasing SSS, the storage modulus of the dried gel increased; whereas that of the rheometrically measured hydrated gel decreased. Tan δ decreased with increasing SSS because of enhanced counterion binding. These alcohol‐specific superabsorbing organogels are suggested as excellent candidates for the manufacture of products with high alcohol contents, such as hand sanitizers and fuel gels. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Thermomechanical properties of blends of pectin and poly(vinyl alcohol)

Blends of citrus pectin and several types of poly(vinyl alcohol) were investigated to determine the effects of compositional variables and polymer type on film properties. Some films were also plasticized with glycerol. Films were cast from water onto Lexan™ plates, dried, and removed. Thermomechanical properties were obtained using a dynamic mechanical analyzer, and thermodynamic transitions were also obtained using a differential scanning calorimeter. Increasing the amount of poly(vinyl alcohol) in the blends reduced the storage and loss modulus of the films above the glass transition temperature (T_g). The T_g values observed decreased as the amount of PVOH in the blend increased. Addition of glycerol depressed the PVOH T_g and merged it into the T_g of the pectin/glycerol blend. Changes in the molecular weight and degree of ester hydrolysis of poly(vinyl alcohol) exerted a rather small effect on the blends. © 1996 John Wiley & Sons, Inc.

1 Reference to a brand or firm name does not constitute an endorsement by the U.S. Department of Agriculture over others of a similar nature.

     

Thermal characteristics of IPNs composed of poly(propylene glycol) and poly(acrylic acid)

Interpenetrating polymer networks (IPNs) based on poly(propylene glycol) (PPG) and poly(acrylic acid) (PAAc) were prepared by UV irradiation and characterized using fourier transform infrared (FTIR), differential scanning calorimetry (DSC), dielectric analysis (DEA), and thermogaravimetry (TGA). The glass transition temperatures (T_gs) of these IPNs exhibited a relatively higher temperature with an increased PAAc content. The decomposition temperature of PAAc is lower than that of PPG. PAAc affects the thermal stability of IPN more than PPG. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2570–2574, 2003     

Synthesis and characterization of biodegradable poly(butylene succinate‐co‐propylene succinate)s

Biodegradable polyesters such as poly(butylene succinate) (PBS), poly(propylene succinate) (PPS), and poly(butylene succinate‐co‐propylene succinate)s (PBSPSs) were synthesized respectively, from 1,4‐succinic acid with 1,4‐butanediol and 1,3‐propanediol through a two‐step process of esterification and polycondensation in this article. The composition and physical properties of both homopolyesters and copolyesters were investigated via ¹H NMR, DSC, TGA, POM, AFM, and WAXD. The copolymer composition was in good agreement with that expected from the feed composition of the reactants. The melting temperature (T_m), crystallization temperature (T_c), crystallinity (X), and thermal decomposition temperature (T_d) of these polyesters decreased gradually as the content of propylene succinate unit increased. PBSPS copolyesters showed the same crystal structure as the PBS homopolyester. Besides the normal extinction crosses under the polarizing optical microscope, the double‐banded extinction patterns with periodic distance along the radial direction were also observed in the spherulites of PBS and PBSPS. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Thermal and mechanical properties of poly(vinyl alcohol) plasticized with glycerol

Thermomechanical behavior of membranes based on blends of poly(vinyl alcohol) (PVA) with different weight percentage (wt %) of glycerol has been studied. Solid‐state PVA/Glycerol polymer membranes were prepared by a solution casting method. The films were studied for thermal characteristics by differential scanning calorimetry (DSC) and thermogravimetric analysis and for the mechanical properties including hardness and modulus by nanoindentation method. The dispersion of glycerol within the polymer matrix was examined using scanning electron microscopy. Fourier transform infrared spectroscopy was used to confirm the formation of hydrogen bonding between the plasticizer and PVA in their blends and also to provide information on compatibility and physical interactions between the glycerol and PVA. It was found that the thermal properties particularly the melting point (T_m) for PVA blends exhibit a reduced value proportional to the glycerol content. The hardness and elastic modulus were also found to decrease with an increase in plasticizer content. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of solvent on thermal transitions and conductivity of poly (vinylidene fluoride) gel electrolytes

ABSTRACT

The melting (T_m) and crystallization (T_c) temperature increased with increasing solvent phenyl propanol (PhP) concentration in the mixture of solvent propylene carbonate and phenyl propanol (PC/PhP). It is also a little enhances of Tm and Tc with adding ethylene carbonate (EC) to propylene carbonate (PC). The melting (T_m) and softening temperature (T_soft) follows the following order of solvents PC<EC:PC<PhP:PC. There was a small change of modulus was observed with the addition of PhP. The conductivity falls with increasing PhP concentration and viscosity and re-calculate free ion concentration. The adding EC to PC raises temperatures slightly, but conductivity much the same. The overall, adding poorer solvent PhP increases the melting and crystallization temperatures at the expense of conductivity, but a little changes was observed in storage modulus, much better gel network, thereby securing the continuity of the complex leads to more flexible ductile and crystalline phase serves better mechanical properties. The crystallinity of PVDF gel electrolyte is about 50%, which facilitate to changes gel network structure slightly with PhP concentration. The formation of fully interconnected three dimensional frame work structure uniformly distributed pores with large surface area can function as efficient channels for ion conduction.     

Rheological behavior of partially hydrolyzed poly(vinyl acetate-co-ethylene)

The rheological behavior of partially hydrolyzed poly(vinyl acetate-co-ethylene) (VAE) was investigated, using a Rheometrics Dynamic Mechanical Spectrometer. For the investigation, measurements of storage modulus (G′), loss modulus (G″) and loss tangent (tan δ) of the materials were recorded as functions of temperature at a fixed frequency (i.e., using temperature scans) and, also, as functions of frequency at a fixed temperature (i.e., using frequency scans). For the hydrolysis, three different grades of copolymer (containing 34, 47, 62 mol% of vinyl acetate) were used to yield poly(vinyl acetate-co-ethylene-co-vinyl alcohol) (VAEOH) with varying amounts of hydroxyl group. For comparison purposes, the viscoelastic properties of blends of VAE copolymer with poly(vinyl alcohol) (PVOH), having varying blend compositions, were also measured. The blends were prepared by first mixing a solution of VAE copolymer, which was dissolved in a toluene/dichloroethane mixed solvent, and an aqueous solution of PVOH, and then freeze drying the mixture to a constant weight. Also measured were the glass transition temperature (T_g) of the VAE copolymers and the T_g and melting point (T_m) of the VAEOH terpolymers, using a DuPont Thermal Analyzer equipped with a 910 DSC Module. It has been found that (1) introduction of hydroxyl group into the backbone of the amorphous VAE copolymer has made the resulting VAEOH terpolymer semicrystalline; (2) the T_m, T_g, G′, and the complex viscosity (η^*) of the VAEOH terpolymers increase with increasing amounts of hydroxyl group; (3) the physical blending of PVOH with VAE copolymer has not affected the T_g of the VAE copolymer; (4) the G′ and η^* of the VAE/PVOH blends are found to increase with the amount of PVOH in the blend. The use of logarithmic plots of G′ versus G″ has been found to be very useful for discerning the differences in the structure of the materials tested.     

Particular thermal properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) oligomers

Telechelic hydroxylated poly(3-hydroxybutyrate-co-3-hydroxyvalerate)s (PHBV-diols) were synthesized by transesterification with ethylene glycol, which could be used as the macromonomers for synthesis of block copolymers. PHBV-diols owned particular thermal properties. PHBV-diols had much lower the melting temperatures (T _m s) and better thermal stability than original PHBV. With the decrease of molecular weight, T _m s of PHBV-diols decreased gradually and maximum degradation temperatures (T _max s) increased gradually. T _max -T _m of PHBV-diol could increase by 57.9 °C in comparison with original PHBV. It was meaningful that PHBV block in the block copolymers based on PHBV-diol owned the good thermal stability and low melting temperature of its precursor PHBV-diol, which widened greatly the melt-processing window of PHBV. In addition, thermal degradation kinetics was studied by Ozawa method, the integration method and Kissinger method. The results showed that the thermal degradation of original PHBV and PHBV-diols proceeded by at least two steps including a random degradation process and subsequent thermal degradation process due to the auto-accelerated degradation reaction.     

Kinetics of sol-to-gel transition for poloxamer polyols

Kinetics of gelation for aqueous solutions of poloxamers 407 and 288 were determined using pulse shearometry. The principle of this method for determining the shear modulus of a semisolid was based on generation of a torsional force that is transmitted through the poloxamer sample at discrete time intervals. Three distinct linear phases were observed for the log dynamic shear modulus (G′) vs. time profiles as poloxamer 407 and 288 solutions of varying concentrations were allowed to passively warm at room temperature to a temperature exceeding the sol-to-gel transition temperature, T_m. The beginning of the second exponential phase coincided with the onset of the gelation process as determined by visual observation. Although gelation appeared visually to be complete at the beginning of the third exponential phase of the log G′ vs. time profiles, this last exponential phase may indicate the rate of formation of the polymer network. A comparison of poloxamer 407 [30% (w/w); T_m = 10.9°C] and poloxamer 288 [37% (w/w); T_m = 11.1°C] would suggest that the concentration of poloxamer required to achieve approximately the same gelation temperature for poloxamers having a similar ratio of poly(oxypropylene):poly(oxyethylene) units decreases with increasing molecular weight of the poly(oxypropylene) hydrophobe contained in the copolymer. Results of these preliminary studies suggest that the gelation process was significantly (p < .05) more rapid for poloxamer 407 at a 30% (w/w) concentration compared to a 30% (w/w) solution of poloxamer 288 when the poloxamer solutions were allowed to passively warm at room temperature. In addition, it appears that the rate of gelation for the poloxamer solutions studied was dependent on the rate of heat transfer through the polymer solution.     

Effects of aging and moisture on the dynamic viscoelastic properties of oriental lacquer (urushi) film

The effects of aging and moisture on the dynamic viscoelastic properties of three oriental lacquer films were investigated. With aging over 1000 days at room temperature, the glass‐transition temperature of the lacquer films (T_α) shifted to higher temperatures, the maximum loss tangent (tanδ_α) decreased, and the storage modulus at 20°C (E) increased. These changes were analogous irrespective of lacquers. With increasing moisture content, E decreased and tanδ increased at room temperature. Although the equilibrium moisture content of the virgin lacquer (sap) film was higher than that of the clear lacquer film, its E and tanδ were more stable with an increase of moisture content. It was speculated that the polysaccharides aggregated in the sap film did not effectively contribute to the mechanical properties of the film, while their hygroscopicity resulted in higher moisture content. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2288–2294, 2002     

Synergistic effect in gamma-irradiated poly(vinyl chloride) hard foils stabilized by plasticizer–stabilizer systems

Changes in transparency and color as well as G_HCl values of hard PVC foils exposed to gamma radiation were investigated while using different amounts of the stabilizers ethylene glycol bis-β-aminocrotonate (I), calcium/zinc laurate + epoxy compounds (II), and magnesium/zinc stearate + sorbitol + epoxy compounds (III), and plasticizers dioctyl phthalate (DOP) (IV), dioctyl sebacate (V), propylene glycol polyadipate + octyl alcohol composition (VI), and diisotridecyl phthalate (VII). A strong synergistic effect was observed in systems containing both plasticizer and stabilizer. Best results were obtained for the I + II + IV, I + II + V, and I + III + V systems.     

Synthesis and hydrophilicity of poly(butylene 2,6‐naphthalate)/poly(ethylene glycol) copolymers

Poly(butylene 2,6‐naphthalate) (PBN)/poly(ethylene glycol) (PEG) copolymers were synthesized by the two‐step melt copolymerization process of dimethyl‐2,6‐naphthalenedicarboxylate (2,6‐NDC) with 1,4‐butanediol (BD) and PEG. The copolymers produced had different PEG molecular weights and contents. The structures, thermal properties, and hydrophilicities of these copolymers were studied by ¹H NMR, DSC, TGA, and by contact angle and moisture content measurements. In particular, the intrinsic viscosities of PBN/PEG copolymers increased with increasing PEG molecular weights, but the melting temperatures (T_m)_, the cold crystallization temperatures (T_cc)_, and the heat of fusion (ΔH_f) values of PBN/PEG copolymers decreased on increasing PEG contents or molecular weights. The thermal stabilities of the copolymers were unaffected by PEG content or molecular weight. Hydrophilicities as determined by contact angle and moisture content measurements were found to be significantly increased on increasing PEG contents and molecular weights. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2677–2683, 2006     

Dynamic mechanical properties of styrene butadiene rubber and poly (ethylene-co-vinyl acetate) blends

The dynamic mechanical behaviour of uncrosslinked and crosslinked styrene butadiene rubber/poly (ethylene-co-vinyl acetate) (SBR/EVA) blends was studied with reference to the effects of blend ratio, crosslinking systems, a compatibilizer viz. maleic-anhydride grafted poly [styrene-b-(ethylene-co-butylene)-b-styrene] (SEBS-g-MA), frequency and temperature. The two separate tan δ peaks, obtained during DMA, indicated the immiscibility of SBR/EVA system. The damping properties increased with SBR content for uncrosslinked and crosslinked blends. In the case of crosslinked systems, depending upon the type of crosslinking agent used, the glass transition temperature (T _g) of SBR phase has been found to be shifted to higher temperatures. The damping characteristics of the blends were observed to be affected by the variations in frequency. The addition of the compatibilizer improved the storage modulus and reduced the damping properties. These results have been correlated with the morphology of the blends, attested by scanning electron micrographs. The activation energy for glass transition has been computed. The experimental data on storage modulus were compared with theoretical predictions.     

The influence of crystallinity on the beta-transition in poly(vinyl chloride)

The effect of changes in crystallinity on the β-transition in poly(vinyl chloride) was studied by dynamic mechanical measurements of loss tangent (tan δ) and storage modulus (E′) over the temperature range ?160° to 85°C. Four frequencies were covered, 3.5, 11, 35, and 110 Hz. The data presented demonstrate that crystallinity has a significant influence on the relaxation processes involved in the β-transition. The restrictions on segmental mobility imposed by crystallinity are most pronounced in the region between T_β and T_g, with T_β tending to shift to lower temperatures, T_g shifting to slightly higher temperatures, the magnitude of tan δ decreasing, and engineering tensile strength increasing. Our data also show that individual PVC resins have mechanical and physical properties which differ enough so that comparisons which are often made between them may be inconclusive. Moreover, the properties of one resin may be more sensitive to thermal treatment than those of another. We are continuing this study to establish correlations between the observed trends and other important mechanical properties such as impact strength, toughness, tensile, and compressive strength.