Preparation and blood compatibility of phosphorylcholine‐bonded O‐butyrylchitosan

2‐Methacryloyloxyethyl phosphorylcholine (MPCE) was synthesized using phosphorus trichloride, ethylene glycol, 2‐hydroxyethyl methacrylate and triethylamine, and then used in the preparation of O‐butyrylchitosan‐bonded MPCE (MPCE–BCS) by Michael addition of MPCE to amino groups of O‐butyrylchitosan. The structures of MPCE and MPCE–BCS were characterized by FTIR and ¹H NMR. The blood‐compatibility of MPCE–BCS was evaluated by means of blood clotting and platelet adhesion assays. The blood‐clotting assay indicated that O‐butyrylchitosan was haemocompatible. Both the blood‐clotting assay and platelet adhesion assay confirmed that MPCE–BCS had excellent antithrombogenicity. © 2003 Society of Chemical Industry     

Effect of polymerization conditions on o‐phenylenediamine and o‐phenetidine oxidative copolymers

A series of new o‐phenylenediamine (OPD)/o‐phenetidine (PHT) copolymers with partly phenazine‐like structures has been successfully synthesized at three polymerization temperatures by chemically oxidative polymerization in four different polymerization media. The molecular structures and properties of the resulting OPD/PHT polymers were investigated by IR, UV–vis and high‐resolution ¹H NMR spectroscopies, and DSC, in order to ascertain the effect of reaction temperature, comonomer ratio and acid medium. The copolymerization mechanism of OPD with PHT monomers has been proposed. It is found that the statistical OPD/PHT copolymer obtained at a temperature of 118 °C has a higher degree of polymerization than that obtained at 12–17 °C. The OPD content in the copolymers calculated from NMR spectroscopic analysis is higher than that in the feed OPD content, whereas the OPD content calculated from element analysis is slightly lower than the feed OPD content. It can be predicted that denitrogenation takes place in the OPD units during the polymerization process at OPD/PHT molar ratios of 90/10 and 100/0. These OPD/PHT copolymers exhibit a much better solubility than the OPD homopolymer, hence suggesting an incorporation of PHT units into the phenazine structure of the homopolymer. The thermal behavior of the copolymers was also studied. Copyright © 2004 Society of Chemical Industry     

Preparation and fluorescence properties of poly(o‐methyl‐acrylamideyl‐benzoic acid)‐ZnS composites

Poly(o‐methyl‐acrylamideyl‐benzoic acid)‐ZnS (P(o‐MAABA)‐ZnS) nanocomposites have been prepared and characterized. The resultant P(o‐MAABA)‐ZnS nanocomposites in solution show two emissions in the purple‐light area (370 nm) and in the blue‐light area (425 nm), which are assigned to the polymer and ZnS nanoparticles, respectively. The coordination between the polymer and Zn²⁺ and the surface chemical composition has been studied by Infrared spectroscopy and X‐ray photoelectron spectroscopy (XPS). The particle size of ZnS nanoparticles was homogeneous and the average size was 3.8 nm, which were characterized by UV absorption spectrum and X‐ray Diffraction. The P(o‐MAABA)‐ZnS composites displays good film formability and the films also show two emissions in 370 and 425 nm. After doped with Tb³⁺, there was effective energy transfer from ZnS nanoparticles to Tb³⁺. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Studies on the dielectric properties of poly(o‐toluidine) and poly(o‐toluidine‐aniline) copolymer

Poly(o‐toluidine) (PoT) and poly(o‐toluidine co aniline) were prepared by using ammonium persulfate initiator, in the presence of 1M HCl. It was dried under different conditions: room temperature drying (48 h), oven drying (at 50°C for 12 h), or vacuum drying (under vacuum, at room temperature for 16 h). The dielectric properties, such as dielectric loss, conductivity, dielectric constant, dielectric heating coefficient, loss tangent, etc., were studied at microwave frequencies. A cavity perturbation technique was used for the study. The dielectric properties were found to be related to the frequency and drying conditions. Also, the copolymer showed better properties compared to PoT alone. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 592–598, 2004     

Curing kinetics and thermal property characterization of o‐CFER/MeTHPA/O‐MMT nanocomposite

The kinetics of the cure reaction for a system of o‐cresol‐formaldehyde epoxy resin (o‐CFER), 3‐methyl‐tetrahydrophthalic anhydride (MeTHPA), N,N‐dimethyl‐benzylamine, and organic montmorillonite(O‐MMT) were investigated by means of X‐ray diffraction (XRD) and differential scanning calorimetry (DSC). The XRD result indicates that an exfoliated nanocomposite was obtained. The analysis of DSC data indicated the behavior was shown in the first stages of the cure for the system, which could be well described by the model proposed by Kamal. In the later stages, the reaction is mainly controlled by diffusion, and diffusion factor, f(α), was introduced into Kamal's equation. In this way, the curing kinetics was predicted well over the entire range of conversion. Molecular mechanism for curing reaction was discussed. The thermal degradation kinetics of the system were investigated by thermogravimetric analysis (TGA), which revealed that with the increase of O‐MMT content, TG curves shift to higher temperature. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3023–3032, 2006     

Electrosynthesis and characterization of o‐phenylenediamine oligomers

The contribution of electrochemical methods to the development of conducting polymers has been most relevant, although the electropolymerization mechanism has not yet been totally elucidated. The formation of a high‐density oligomeric region in the electrode–solution interface has been clearly established as formed by oligomers with different chain lengths. It has been confirmed that, depending on the variables governing the process (applied potential, electrolysis time, concentration, etc), it is possible to control to some extent the oligomer to be generated. In this present work, the electrosynthesis of oligomers of o‐phenylenediamine is proposed. A saturated solution of the monomer was electrolysed at 0.95 V versus SCE over 1 min, using stainless steel as the working electrode material. Under these conditions, a mixture of the dimer and tetramer, relatively easy to separate by thin layer chromatography, was deposited. The products were characterized by mass spectrometry, UV–vis spectroscopy, elemental analysis and ¹H NMR spectroscopy. This approach allows the synthesis of oligomers in a fast and simple way. In addition, the product is directly obtained on the electrode surface, hence making its separation and purification very straightforward. Copyright © 2004 Society of Chemical Industry     

Comparison of poly(o‐anisidine) and poly(o‐anisidine‐co‐aniline) copolymer synthesized by chemical oxidative method

In this study, poly(o‐anisidine) [POA], poly(o‐anisidine‐co‐aniline) [POA‐co‐A], and polyaniline [PANi] were chemically synthesized using a single polymerization process with aniline and o‐anisidine as the respective monomers. During the polymerization process, p‐toluene sulfonic acid monohydrate was used as a dopant while ammonium persulfate was used as an oxidant. N‐methyl‐pyrolidone (NMP) was used as a solvent. We observed that the ATR spectra of POA‐co‐A showed features similar to those of PANi and POA as well as additional ones. POA‐co‐A also achieved broader and more extended UV–vis absorption than POA but less than PANi. The chemical and electronic structure of the product of polymerization was studied using Attenuated Total Reflectance spectroscopy (ATR) and UV–visible spectroscopy (UV–vis). The transition temperature of the homopolymers and copolymers was studied using differential scanning calorimetry and the viscosity average molecular weight was studied by using dilute solution viscometry. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of castor oil‐based polyurethane/poly(o‐methoxyaniline) blend film

Blends made up of castor oil‐based polyurethane (PU) and poly(o‐methoxyaniline) (POMA) were obtained in the form of films by casting and characterized by FTIR, UV‐Vis‐NIR spectroscopy, and electrical conductivity measurements. Doping was carried out by immersing the films in 1.0M HCl aqueous solution. Chemical bonds between NCO group of PU and NH group of POMA were observed by means of FTIR spectra. The UV‐Vis‐NIR spectra indicated that the presence of the PU in the blend does not affect doping and formation of the POMA phase. The electrical conductivity research was in the range of 10^?3 S/cm. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis and characterization of poly(o‐anisidine)/V2O5 and poly(o‐anthranilic acid)/V2O5 nanocomposites

Poly(o‐anisidine)/V₂O₅ and poly(o‐anthranilic acid)/V₂O₅ nanocomposites were prepared by in situ intercalative polymerization, and the structure and electrical properties of these nanocomposites were investigated using GPC, TGA, XRD, TEM, FTIR, UV‐vis as well as conductivity measurement. The results show that the steric effect and nature of the substituting groups in the aromatic ring has an influence on the structure and electrical properties of the nanocomposites. Poly(o‐anisidine) or poly(o‐anthranilic acid) exists as a monolayer of outstretched chains in the gallery of the V₂O₅ xerogel owing to the confined environment in the nanometer‐size gallery. And intercalation of poly(o‐anisidine) or poly(o‐anthranilic acid) can improve the conductivity of V₂O₅ xerogel. Copyright © 2005 Society of Chemical Industry     

Synthesis,characterization of biomimetic phosphorylcholine‐bound chitosan derivative and in vitro drug release of their nanoparticles

Novel water‐soluble biomimetic phosphorylcholine (PC)—bound chitosan derivatives (N‐PCCs) with different degree of substitution (DS) via a phosphoramide linkage between glucosamine and PC were synthesized through Atherton‐Todd reaction under the mild conditions, and structurally characterized by ¹H‐NMR, Fourier transform infrared (FTIR) spectroscopy, gel permeation chromatography (GPC), X‐ray diffraction (XRD), differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). Their DS ranged from ～ 16 to ～ 42 mol % based on the ¹H‐NMR spectra. All these N‐PCCs with decreased crystallization showed excellent solubility in the aqueous solutions within a wide pH range (1–12). DSC and TGA results revealed that the thermal stability of N‐PCCs decreased with the increase of DS value. Further, N‐PCCs nanoparticles could be still formed in a spherical shape similar to chitosan nanoparticles by ionic gelation technique, observed by atomic force microscopy (AFM). Dynamic light scattering (DLS) results suggested that the zeta potential value of N‐PCCs nanoparticles decreased with the DS value increasing. Using 5‐fluorouracil (5‐Fu) as a model drug, in vitro drug release studies indicated that N‐PCCs nanoparticles exhibited a similar prolonged release profile as chitosan nanoparticles. The results suggested that N‐PCCs nanoparticles could be used as promising nanocarriers for drug delivery applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Self‐assembled centimetre‐sized rods obtained in the oxidation of o‐phenylenediamine and aniline

Morphologically well‐defined rods of approximately 1 cm in length are effectively and economically obtained by mixing ortho‐phenylenediamine (30 mmol L^?1) with ammonium persulfate (12.5 mmol L^?1) in an acidic solution (0.37 mol L^?1 HCl) at room temperature with and without the presence of 50 mmol L^?1 aniline. These self‐assembled, morphologically uniform products can be potentially scaled up and used as morphological templates to fabricate well‐defined structures of other materials such as conducting polymers. The products were characterized using Raman, UV‐visible, high‐resolution NMR (¹H and ¹³C) and mass spectroscopies, X‐ray diffraction, scanning electron microscopy and elemental analysis. Apart from certain differences in visual appearance and in X‐ray diffractograms, other analytical data suggest that there are no structural changes upon addition of aniline into the reaction mixture. NMR and mass spectra imply that all syntheses carried out either with or without aniline result in a mixture of two products, attributed to 2,3‐phenazinediamine and 3‐aminophenazin‐2‐ol. A formation mechanism based on hydrogen bonding and π–π stacking has been proposed. © 2015 Society of Chemical Industry     

Copolymers of aniline with o‐ and m‐toluidine: synthesis and characterization

Copolymers of aniline and toluidine were synthesized by oxidative chemical polymerization using different ratios of the monomers in the feed, and characterized by a number of techniques including UV–visible, IR, Raman, ¹H NMR and EPR spectroscopies, as well as by thermogravimetric analysis and conductivity measurements. The properties of the copolymers are influenced by the amount of toluidine in the copolymer. Poly(o‐toluidine) and poly(m‐toluidine) are noticeably different in their solubility and conductivity. The copolymers show better solubilities than polyaniline but have lower conductivities. Differences in the properties of the salt and base forms of the copolymers are pointed out. Copyright © 2003 Society of Chemical Industry     

Preparation of 2‐Aryl‐2H‐benzotriazoles by Zinc‐Mediated Reductive Cyclization of o‐Nitrophenylazophenols in Aqueous Media without the Use of Organic Solvents

Zinc powder‐mediated reductive cyclization of o‐nitrophenylazophenols in alkaline solution affords the corresponding 2‐aryl‐2H‐benzotriazoles in high yields under mild reaction conditions. No organic solvents are used in the reaction and only minimal amounts in the work‐up.     

Preparation,optimization, and voltammetric characteristics of poly(o‐phenylenediamine) film as a dopamine‐selective polymeric membrane

Poly(o‐phenylenediamine) films were electrochemically prepared on gold electrodes from the corresponding monomer in an aqueous solution at a constant potential. The polymeric films prepared in this one‐step procedure were found to be thin and insoluble in the aqueous solution. Cyclic and differential pulse voltammetric techniques were used to examine the permeation properties of ascorbic acid and dopamine at the resultant polymeric film electrode. Then, the effects of the chemical and electrochemical variables (e.g., film thickness, polymerization potential, concentrations of monomer and electrolyte) on the permselectivity characteristics of the polymeric film were systematically investigated and the optimal values for each parameter were determined. Furthermore, it was found that the optimized polymer electrode was found to be stable for the successive runs. As a result, it is claimed that poly(o‐phenylenediamine) film can be used as a dopamine‐selective polymeric membrane. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 327–332, 2001     

Preparation and rheological behaviors of 6‐carboxy‐chitosan

The hydroxymethyl groups of 2‐amino‐2‐deoxy‐D ‐glucose units in chitosan were selectively oxidized to carboxyl groups with NO₂ gas to form 6‐carboxy‐chitosan in aqueous 0.5 mol/L acetic acid. In optimal conditions, the 52.5% hydroxymethyl groups in chitosan could be converted into carboxyl groups. When the pH value of the solution is lower than 4.0 or more than 5.4, 6‐carboxy‐chitosan has common characteristics of a polycation or polyanion electrolyte, respectively, and when the pH value of the solution is 4.0—5.4, 6‐carboxy‐chitosan has common characteristics of an amphoteric polyelectrolyte. 6‐Carboxy‐chitosan has same macromolecular backbones as chitosan, and its isoelectric point (pI) value is 4.9. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1126–1130, 2004     

Kinetics of o‐Xylene Combustion over a Pt/Alumina Catalyst

o‐Xylene combustion in air over a Pt/γ‐Al₂O₃ catalyst was investigated in a laboratory reactor at low concentrations typical for depollution applications. The results evidenced a slightly negative influence of o‐xylene concentration on combustion rate. A kinetic model of the combustion process was developed by using the Langmuir‐Hinshelwood mechanism, assuming the surface reaction between adsorbed oxygen atoms and adsorbed o‐xylene molecules as controlling step. The rate expression includes the influences of o‐xylene and water adsorption on the active centers of the catalyst. The estimation of rate expression parameters is based on o‐xylene conversion measurements obtained under conditions free of influences of physical steps.     

Divinyl benzene cross‐linked HTPB‐based polyurethaneurea membranes for separation of p‐/o‐xylene mixtures by pervaporation

Cross‐linked hydroxy terminated polybutadiene (HTPB)‐based polyurethaneurea (PU), HTPB‐divinyl benzene (DVB)‐PU, was synthesized by a three‐step polymerization process. It was first used as membrane material to separate p‐/o‐xylene mixtures by pervaporation (PV). The effects of the content of cross‐linker DVB, feed concentration, and operating temperature on the PV performance of HTPB‐DVB‐PU membranes were investigated. The membranes demonstrated p‐xylene permselectivity as well as high total flux. The introduction of DVB significantly enhanced the temperature resistance ability of the HTPB‐DVB‐PU membranes. With increasing DVB content, the separation factor increased while the total flux decreased a little. The highest separation factor reaches 2.01 and the total flux is 33 g/m²h with feed concentration of 10 wt % p‐xylene at 30°C. These PV performances with increasing DVB content were explained in terms of the view point of chemical compositions and physical structures of the HTPB‐DVB‐PU membranes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Water‐soluble copolymers from functionalized monomers (sodium o‐ and p‐methacryloylaminophenylarsonate): Synthesis and characterization

Copolymers of sodium o‐methacryloylaminophenylarsonate (o‐MAPHA‐Na) 1 and p‐methacrylolylaminophenylarsonate (p‐MAPHA‐Na) 2 with sodium acrylate (AA‐Na) 3 , sodium methacrylate (AM‐Na) 4 and acrylamide (AAD) 5 were prepared by free radical polymerization in aqueous media at 70°C using potassium persulfate (K₂S₂O₈) as the initiator. The total monomer concentration was carried out at 0.5M and the feed ratio ( M₁ : M₂ ) was varied from 10 : 90 to 90 : 10 mol%. The kinetic study was carried out by dilatometric method. The copolymer compositions were calculated by arsenic content in the copolymers. The As content (ppm) was determined by atomic absorption spectrometry (AAS). The reactivity ratios (r₁, r₂) were estimated by the Kelen‐Tüdös linearization method as well as error‐in‐variables method using the computer program RREVM®. In all cases, r₁ < 1 and r₂ > 1, indicating a tendency to form random copolymers. The values suggest that the copolymers contain a larger proportion of comonomer (i.e., AA‐Na, AM‐Na, or AAD). Weight‐average molar masses (M _w) of copolymers were determined by multi‐angle light scattering. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010