首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 46 毫秒
1.
A series of polymer–clay nanocomposite (PCN) materials that consist of organosoluble polyimide and layered montmorillonite clay were prepared by the solution dispersion technique. The organosoluble polyimide containing non‐coplanar moiety in diamine monomer and flexible bridging linkages in dianhydride monomer was synthesized by chemical imidization. The as‐synthesized PCN materials were characterized by infrared spectroscopy, wide‐angle powder X‐ray diffraction, and transmission electron microscopy. The organosoluble polyimide showed better corrosion resistance compared to polyaniline, poly(o‐ethoxyaniline) and poly(methyl methacrylate) by using a series of standard electrochemical corrosion measurements of corrosion potential, polarization resistance, and corrosion current in 5 wt % aqueous NaCl electrolyte. Polyimide–clay nanocomposite materials incorporated with low loading of clay were found to further improve corrosion inhibition over pure polyimide. Effects of the material composition on the O2/H2O molecular permeability, optical clarity, and thermal properties of polyimide–clay nanocomposite materials were studied by molecular permeability analysis, UV–visible transmission spectra, thermogravimetric analysis, and differential scanning calorimetry, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3573–3582, 2004  相似文献   

2.
A series of polymer–clay nanocomposite (PCN) materials that consisted of poly(styrene‐co‐acrylonitrile) (PSAN) and layered montmorillonite (MMT) clay were successfully prepared by effectively dispersing the inorganic nanolayers of MMT clay into the organic PSAN matrix by a conventional in situ thermal polymerization. First of all, organic styrene and AN monomers at a specific feeding ratio were simultaneously intercalated into the interlayer regions of organophilic clay hosts and followed by a typical free‐radical polymerization with benzyl peroxide as initiator. The as‐synthesized PCN materials were subsequently characterized by FTIR spectroscopy, wide‐angle powder X‐ray diffraction, and transmission electron microscopy. The as‐prepared PCN materials, in the form of coatings, incorporated with low clay loading (e.g., 1 wt %) on cold‐rolled steel, were found to be much superior in corrosion protection over those of bulk PSAN based on a series of standard electrochemical measurements of corrosion potential, polarization resistance, and corrosion current in 5 wt % aqueous NaCl electrolyte. Molecular weights of PSAN extracted from PCN materials and bulk PSAN were determined by gel permeation chromatography with THF as eluant. Effects of the material composition on the molecular barrier and thermal stability of PSAN along with PCN materials, in the form of both membrane and fine powder, were also studied by molecular permeability analysis, differential scanning calorimetry, and thermogravimetric analysis, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2269–2277, 2004  相似文献   

3.
A series of electronically conductive nanocomposite materials that consisted of soluble polypyrrole (PPY) and layered montmorillonite (MMT) clay platelets were prepared by effectively dispersing the inorganic nanolayers of MMT clay in organic PPY matrix via an in situ oxidative polymerization with dodecylbenzene sulfonic acid (DBSA) as dopant. Organic pyrrole monomers were first intercalated into the interlayer regions of organophilic clay hosts and followed by a one‐step oxidative polymerization. The as‐synthesized electronically conductive polypyrrole–clay nanocomposite (PCN) materials were then characterized by Fourier transformation infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (XRD), and transmission electron microscopy (TEM). PCNs in the form of coatings with low clay loading (e.g., 1.0 wt %) on cold‐rolled steel (CRS) were found to exhibit much better in corrosion protection over those of pristine PPY based on a series of electrochemical measurements including corrosion potential, polarization resistance, and corrosion current in 5 wt % aqueous NaCl electrolyte. Effects of the material composition on the thermal stability, optical properties, and electrical conductivity of pristine PPY along with PCN materials, in the form of fine powder, powder‐pressed pellet, and solution, were also studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), UV‐visible absorption spectra, and four‐point probe technique, respectively. The viscosity of PPY existed in PCN materials and pristine PPY were determined by viscometric analysis with m‐cresol as solvent. The heterogeneous nucleating effect of MMT clay platelets in PPY matrix was studied by wide‐angle powder XRD. The corresponding morphological images of the nucleating behavior of clay platelets in PPY matrix were investigated by scanning electron microscopy (SEM). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 3264–3272, 2003  相似文献   

4.
A series of polymer–clay nanocomposite (PCN) materials that consist of poly(N‐vinylcarbazole) (PNVC) and layered montmorillonite (MMT) clay are prepared by effectively dispersing the inorganic nanolayers of MMT in an organic PNVC matrix via in situ photoinitiated polymerization with triarylsulfonium salt as the initiator. Organic NVC monomers are first intercalated into the interlayer regions of the organophilic clay hosts, followed by one‐step UV‐radiation polymerization. The as‐synthesized PCN materials are typically characterized by Fourier transform IR spectroscopy, wide‐angle X‐ray diffraction, and transmission electron microscopy. The molecular weights of PNVCs extracted from the PCN materials and the bulk PNVC are determined by gel permeation chromatography analysis with tetrahydrofuran as the eluant. The morphological image of the synthesized materials is observed by an optical polarizing microscope. The effects of the material composition on the optical properties and thermal stability of PNVCs and a series of PCN materials (solution and fine powder) are also studied by UV–visible absorption spectra measurements, thermogravimetric analysis, and differential scanning calorimetry, respectively. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1904–1912, 2004  相似文献   

5.
A series of polymer–clay nanocomposite (PCN) materials consisting of polystyrene (PS) and layered montmorillonite (MMT) clay was prepared by effectively dispersing the inorganic nanolayers of MMT clay in the organic PS matrix via in situ thermal polymerization. Organic styrene monomers were first intercalated into the interlayer regions of organophilic clay hosts, followed by a typical free radical polymerization with BPO as the initiator. The as‐synthesized PCN materials were characterized by infrared spectroscopy (IR), wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). PCN coatings with low clay loading (1 wt %) on cold‐rolled steel (CRS) were found to be superior in anticorrosion to those of bulk PS, based on a series of electrochemical measurements of corrosion potential, polarization resistance and corrosion current in a 5 wt % aqueous NaCl electrolyte. The molecular weights of PS extracted from PCN materials and bulk PS were determined by gel permeation chromatography (GPC) with tetrahydrofuran (THF) as the eluent. The effects of material composition on molecular barrier and thermal stability of PS and PCN materials, in the form of both free‐standing films and fine powders, were also studied by molecular permeability analysis, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1970–1976, 2004  相似文献   

6.
A series of heterocyclically conjugated polymer–clay nanocomposite (PCN) materials that consisted of organic poly(3‐hexylthiophene) (P3HT) and inorganic montmorillonite (MMT) clay platelets were prepared by in situ oxidative polymerization with FeCl3 as an oxidant. The as‐synthesized PCN materials were characterized by Fourier transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (WAXRD), and transmission electron microscopy (TEM). The effects of the material composition on the anticorrosion, gas barrier, thermal stability, flammability, mechanical strength, and electrical conductivity properties of the P3HT and PCN materials were studied by electrochemical corrosion measurements, gas‐permeability analysis (GPA), thermogrametric analysis (TGA), limiting oxygen index (LOI) measurements, dynamic mechanical analysis (DMA), and a four‐point probe technique, respectively. The molecular weights of extracted and bulk P3HT were determined by gel permeation chromatography (GPC) with THF as an eluant. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3438–3446, 2004  相似文献   

7.
A series of polymer–clay nanocomposite (PCN) materials consisting of organic poly(methyl methacrylate) (PMMA) and inorganic montmorillonite (MMT) clay platelets were prepared successfully by the effective dispersion of nanolayers of the MMT clay in the PMMA framework through both in situ emulsion polymerization and solution dispersion. The as‐prepared PCN materials obtained with both approaches were subsequently characterized with wide‐angle powder X‐ray diffraction and transmission electron microscopy. For a comparison of the anticorrosion performance, a PCN material (e.g., 3 wt % clay loading) prepared by in situ emulsion polymerization, showing better dispersion of the clay platelets in the polymer matrix, exhibited better corrosion protection in the form of a coating on a cold‐rolled steel coupon than that prepared by solution dispersion, which showed a poor dispersion of the clay nanolayers according to a series of electrochemical corrosion measurements. Comparative studies of the optical clarity, molecular barrier properties, and thermal stability of samples prepared in both ways, as membranes and fine powders, were also performed with ultraviolet–visible transmission spectroscopy, molecular permeability analysis, thermogravimetric analysis, and differential scanning calorimetry. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1936–1946, 2004  相似文献   

8.
A series of polymer–clay nanocomposite (PCN) materials containing polysulfone (PSF) and layered MMT clay were successfully prepared by effectively dispersing inorganic nanolayers of MMT clay in an organic PSF matrix via a solution dispersion technique. The synthesized PCN materials were subsequently investigated with a series of characterization techniques, including Fourier transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The prepared PCN coatings with low clay loading (1 wt %) on cold‐rolled steel (CRS) were found to be superior in corrosion prevention to those of bulk PSF, based on a series of electrochemical measurements of corrosion potential, polarization resistance, corrosion current and electrochemical impedance spectroscopy (EIS) in a 5 wt % aqueous NaCl electrolyte. The effects of material composition on the molecular barrier, mechanical strength and optical clarity of PSF and PCN materials, in the form of membranes, was also studied by molecular permeability analysis (GPA), dynamic mechanical analysis (DMA) and UV‐Visible transmission spectra, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 631–637, 2004  相似文献   

9.
Poly(methyl methacrylate) (PMMA)–clay nanocomposite (PCN) materials were synthesized through in situ intercalative polymerization. A cationic surfactant, [2(dimethylamino)ethyl]triphenylphosphonium bromide, was used as an intercalating agent with pristine Na+‐montmorillonite (MMT). The synthesized PCN materials were subsequently investigated by a series of characterization techniques, including wide‐angle powder X‐ray diffraction, Fourier transform IR spectroscopy, transmission electron microscopy, thermogravimetric analysis, and differential scanning calorimetry. Compared to pure PMMA, the PCN materials exhibit higher thermal degradation temperatures and glass‐transition temperatures. The dielectric properties of PCN blending with a commercial PMMA material in film form with clay loading from 0.5 to 5.0 wt % were measured under frequencies of 100 Hz–1 MHz at 35–100°C. Significantly depressed dielectric constants and losses were observed for these PCN‐blending materials. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2175–2181, 2005  相似文献   

10.
A series of polymer-clay nanocomposite (PCN) materials that consisted of emeraldine base of poly(o-ethoxyaniline) (PEA) and layered montmorillonite (MMT) clay were prepared by effectively dispersing the inorganic MMT clay platelets in organic PEA matrix via in situ oxidative polymerization. Organic o-ethoxyaniline monomers were first intercalated into the interlayer regions of organophilic clay hosts and were followed by a one-step oxidative polymerization. The as-synthesized PCN materials were characterized by Fourier transform infrared (FTIR) spectroscopy, wide-angle X-ray diffraction (XRD) and transmission electron microscopy (TEM).PCN materials at low clay loading up to 3 wt% in the form of coating (e.g. 0.5 wt%) on cold-rolled steel (CRS) were found to exhibit much superior corrosion inhibition effect as compared to those of the bulk PEA by performing a series of electrochemical measurements of corrosion potential, polarization resistance, corrosion current and impedance spectroscopy in 5 wt% aqueous NaCl electrolyte. Furthermore, it was found that a further increase of clay loading up to 3 wt% results in a slightly enhanced molecular barrier property of PCN materials. The molecular weights of PEA extracted from PCN materials and bulk PEA were determined by gel permeation chromatography (GPC) analysis with NMP as eluant. Effects of the material composition on the molecular barrier, thermal stability, electrical conductivity and optical properties of PEA along with a series of PCN materials, in the form of free-standing film, fine powder and solution, were also studied by molecular permeability measurements (GPA), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), four-point probe technique and UV-vis spectra.  相似文献   

11.
A series of polymer–clay nanocomposite (PCN) materials consisting of 1,4‐bis(4‐aminophenoxy)‐2‐tert‐butylbenzene–4,4′‐oxydiphthalic anhydride (BATB–ODPA) polyimide (PI) and layered montmorillonite (MMT) clay were successfully prepared by an in situ polymerization reaction through thermal imidization up to 300°C. The synthesized PCN materials were subsequently characterized by Fourier‐Transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The effects of material composition on thermal stability, mechanical strength, molecular permeability and optical clarity of bulk PI and PCN materials in the form of membranes were studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), molecular permeability analysis (GPA) and ultraviolet‐visible (UV/VIS) transmission spectra, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1072–1079, 2004  相似文献   

12.
High‐conversion (HC) copolymers of aniline and o‐methoxyaniline (o‐anizidine) were synthesized for the first time by chemical oxidative copolymerization using various polymerization techniques (simultaneous or consecutive introduction of comonomers into the polymerizing system). Low‐conversion (LC) copolymers have also been synthesized for comparison. The polymers obtained were characterized using 1H‐NMR, infrared, and electronic absorption spectroscopy, differential scanning calorimetry, and electrical conductivity measurements. Solubility characteristics and composition of different fractions of the copolymers were also determined. It was shown that in contrast to the LC copolymers, HC copolymers reveal relatively poor solubility. Electrical conductivity of copolymers and also of o‐methoxyaniline homopolymer is lower compared to polyaniline, which correlates with notable hypsochromic (blue) shift of the bands in electronic absorption spectra. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 75–81, 2006  相似文献   

13.
BACKGROUND: Polymer–clay nanocomposites (PCNs) have attracted considerable interest in recent years owing to their unique physical and chemical properties that lead to a wide range of applications. A series of PCN materials consisting of polyimide and layered montmorillonite (MMT) clay were successfully prepared by in situ polymerization. RESULTS: Silicate layers are better dispersed in polymer matrices when dual intercalating agents (hexadecyltrimethylammonium bromide–4,4′‐oxydianiline) are applied for MMT modification according to wide‐angle X‐ray diffraction and transmission electron microscopy studies. Effects of single and dual intercalating agents on thermal stability, mechanical strength and the molecular barrier of PCN materials consisting of organo‐modified MMT were studied by means of thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analyses, gas permeability analysis and vapor permeability analysis. CONCLUSION: Improved thermal and mechanical stabilities, as well as barrier properties were observed for the PCN materials containing dual intercalating agent‐modified MMT. Copyright © 2008 Society of Chemical Industry  相似文献   

14.
A series of nanocomposite materials consisting of water‐soluble polyacrylamide (PAA) and layered montmorillonite (MMT) clay platelets were prepared by the effective dispersion of the inorganic nanolayers of the MMT clay in the organic PAA matrix via in situ ultraviolet‐radiation polymerization. The acrylamide monomers functioned as both the intercalating agent and the reacting monomers. As a representative procedure for the preparation of the nanocomposites, organic acrylamide monomers were first intercalated into the interlayer regions of acrylamide‐treated organophilic clay hosts, and this was followed by one‐step ultraviolet‐radiation free‐radical polymerization with benzil as a photoinitiator. The as‐prepared polyacrylamide–clay nanocomposite (PCN) materials were subsequently characterized by Fourier transform infrared spectroscopy, wide‐angle powder X‐ray diffraction, and transmission electron microscopy. The effects of the material composition on the thermal stability, optical clarity, and gas‐barrier properties of pristine PAA and PCN materials, in the forms of fine powders and membranes, were also studied by differential scanning calorimetry, thermogravimetric analysis, ultraviolet–visible transmission spectroscopy, and gas permeability analysis. The molecular weights of PAA extracted from PCN materials and pristine PAA were determined by gel permeation chromatography with tetrahydrofuran as an eluant. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3489–3496, 2004  相似文献   

15.
Strongly adherent poly(aniline‐coo‐toluidine) coatings were synthesized on low‐carbon‐steel substrates by the electrochemical copolymerization of aniline with o‐toluidine with sodium tartrate as the supporting electrolyte. These coatings were characterized with cyclic voltammetry, ultraviolet–visible absorption spectroscopy, Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, and scanning electron microscopy. The formation of the copolymer with the mixture of monomers in the aqueous sodium tartrate solution was ascertained by a critical comparison of the results obtained from the polymerizations of the individual monomers, aniline and o‐toluidine. The optical absorption spectrum of the copolymer was drastically different from the spectra of the respective homopolymers, polyaniline and poly(o‐toluidine). The extent of the corrosion protection offered by poly(aniline‐coo‐toluidine) coatings to low‐carbon steel was investigated in aqueous 3% NaCl solutions by open‐circuit‐potential measurements and a potentiodynamic polarization technique. The results of the potentiodynamic polarization measurements showed that the poly(aniline‐coo‐toluidine) coatings provided more effective corrosion protection to low‐carbon steel than the respective homopolymers. The corrosion rate depended on the feed ratio of o‐toluidine used for the synthesis of the copolymer coatings. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103:1868–1878, 2007  相似文献   

16.
In this study, preparation and electrochemical corrosion protection studies of a series of polyimide-Clay nanocomposite (PCN) materials were first presented. Subsequently, the as-prepared PCN materials were characterized by FTIR, XRD and TEM studies. In-situ monitoring for redox behavior of as-prepared PCN materials was identified by UV-visible and CV studies.It should be noted that PCN coating was found to reveal advanced corrosion protection effect on cold-rolled steel (CRS) electrode as compared to that of neat non-electroactive polyimide coating based on series of electrochemical corrosion measurements in 5 wt% NaCl electrolyte. Enhancement of corrosion protection of PCN coatings on CRS electrode may be interpreted by following two possible reasons: (1) redox catalytic capabilities (i.e., electroactivity) of ACAT units existed in electroactive PCN may induce formation of passive metal oxide layers on CRS electrode, as evidenced by SEM and ESCA studies. (2) well-dispersed layered organophilic clay platelets embedded in electroactive PCN matrix could functioned as hinder with high aspect ratio to effectively enhance the oxygen barrier property of PCN, as evidenced by GPA.  相似文献   

17.
A series of polyaniline (PANI)/Na+-montmorillonite (MMT) clay and PANI/organo-MMT nanocomposite materials have been successfully prepared by in situ emulsion polymerization in the presence of inorganic nanolayers of hydrophilic Na+-MMT clay or organophilic organo-MMT clay with DBSA and KPS as surfactant and initiator, respectively. The as-synthesized Na+-PCN and organo-PCN materials were characterized and compared by Fourier transformation infrared (FTIR) spectroscopy, wide-angle powder X-ray diffraction (XRD) and transmission electron microscopy (TEM).Na+-PCN materials in the form of coatings with low loading of Na+-MMT clay (e.g., 3 wt.%, CLAN3) on cold-rolled steel (CRS) were found much superior in corrosion protection over those of organo-PCN materials with same clay loading based on a series of electrochemical measurements of corrosion potential, polarization resistance, corrosion current and impedance spectroscopy in 5 wt.% aqueous NaCl electrolyte. The molecular weights of PANI extracted from PCN materials and neat PANI were determined by gel permeation chromatography (GPC) with NMP as eluant. Effects of material composition on the gas permeability, optical properties and electrical conductivity of neat PANI and a series of PCN materials, in the form of free-standing film, solution and powder-pressed pellet, were also studied by gas permeability analyzer (GPA), ultraviolet-vis spectra and four-point probe technique, respectively.  相似文献   

18.
With strict regulation of environmental pollution, sunflower fatty acids were used to prepare high‐molecular‐weight aromatic amine adducts by reaction of their epoxidized form [epoxidized sunflower free fatty acid (ESFA)] with five aromatic amines [o‐toluidine (o‐T), m‐toluidine (m‐T), p‐toluidine (p‐T), p‐anizidine (p‐A), and p‐chloroaniline (p‐ClA)] under severe conditions of an inert atmosphere and high temperature. The produced adducts were characterized physically, chemically, and by IR spectroscopy. The acid values and oxirane contents of the prepared adducts were determined to confirm the participation of carboxylic groups and epoxy groups, respectively, in the reaction of ESFA with aromatic amines. Also, to avoid volatile organic compounds, the prepared adducts of ESFA (o‐T–ESFA, m‐T–ESFA, p‐T–ESFA, p‐A–ESFA, and p‐ClA–ESFA) were evaluated as corrosion inhibitors of mild steel in electron‐beam‐curable epoxy acrylate oligomer formulations. Physical and mechanical measurements were carried out, in addition to corrosion‐resistance tests and weight loss measurements of the coated steel panels. The optimum concentration of each adduct was determined for the prepared formulations. The corrosion‐inhibition efficiency of the adducts in varnish formulations were determined. It was found that varnish formulations containing the prepared aromatic amine adducts could protect steel from corrosion. The corrosion‐inhibition efficiencies of the prepared aromatic amines in epoxy acrylate oligomer varnishes were arranged as follows: p‐A–ESFA > p‐T–ESFA > m‐T–ESFA > o‐T–ESFA > p‐ClA–ESFA. Superior corrosion‐inhibition efficiency was obtained in the varnish formula containing 0.6% p‐A–ESFA adduct. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012  相似文献   

19.
A study on the thermal stability, thermodynamical parameters, especially relaxation transition temperature (Tg), and their change upon irreversible reactions (crosslinking, postpolymerization, decomposition, etc.) taking place on heating of the undoped homo‐ and copolymers of aniline and o‐methoxyaniline was performed by using differential scanning calorimetry. It was found that polyaniline and its oligomers might be responsible for the postpolymerization process observed on heating thermograms of the polymers in their emeraldine base form. It can be stated that the proceeding of this process appears to be a reason for the higher thermal stability of polyaniline when compared with poly(o‐methoxyaniline). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2729–2734, 2007  相似文献   

20.
In this article, a series of nanocomposite materials that consisted of emeraldine base (EB) of polyaniline (PANI) and montmorillonite (MMT) clay were prepared by effectively dispersing the inorganic MMT clay platelets into organic PANI matrix via in situ chemically oxidative polymerization. Organic aniline monomers were first intercalated into the interlayer regions of organophilic clay hosts and followed by an one‐step oxidative polymerization with ammonium persulfate as oxidant. The as‐synthesized PANI‐clay nanocomposite (PCN) materials were characterized by Fourier‐Transformation infrared spectroscopy and transmission electron microscopy. It should be noted that the EB of PANI in the presence of dispersed intercalated MMT clay platelets was found to display an observable enhancement in polymer crystallinity as compared with that of neat PANI based on series of investigations of wide‐angle powder X‐ray diffraction patterns and differential scanning calorimetric studies. This remarkable increase of polymer crystallinity might be resulted from the effective heterogeneous nucleation effect of dispersed clay platelets existed in PCN materials. The surface morphology study of PCN materials was further evaluated by polarizing optical microscopy, scanning electron microscopy, and atomic force microscopy. POLYM. COMPOS., 31:2049–2056, 2010. © 2010 Society of Plastics Engineers  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号