Polyacrylamide–clay nanocomposite materials prepared by photopolymerization with acrylamide as an intercalating agent

A series of nanocomposite materials consisting of water‐soluble polyacrylamide (PAA) and layered montmorillonite (MMT) clay platelets were prepared by the effective dispersion of the inorganic nanolayers of the MMT clay in the organic PAA matrix via in situ ultraviolet‐radiation polymerization. The acrylamide monomers functioned as both the intercalating agent and the reacting monomers. As a representative procedure for the preparation of the nanocomposites, organic acrylamide monomers were first intercalated into the interlayer regions of acrylamide‐treated organophilic clay hosts, and this was followed by one‐step ultraviolet‐radiation free‐radical polymerization with benzil as a photoinitiator. The as‐prepared polyacrylamide–clay nanocomposite (PCN) materials were subsequently characterized by Fourier transform infrared spectroscopy, wide‐angle powder X‐ray diffraction, and transmission electron microscopy. The effects of the material composition on the thermal stability, optical clarity, and gas‐barrier properties of pristine PAA and PCN materials, in the forms of fine powders and membranes, were also studied by differential scanning calorimetry, thermogravimetric analysis, ultraviolet–visible transmission spectroscopy, and gas permeability analysis. The molecular weights of PAA extracted from PCN materials and pristine PAA were determined by gel permeation chromatography with tetrahydrofuran as an eluant. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3489–3496, 2004     

Comparative studies of the properties of poly(methyl methacrylate)–clay nanocomposite materials prepared by in situ emulsion polymerization and solution dispersion

A series of polymer–clay nanocomposite (PCN) materials consisting of organic poly(methyl methacrylate) (PMMA) and inorganic montmorillonite (MMT) clay platelets were prepared successfully by the effective dispersion of nanolayers of the MMT clay in the PMMA framework through both in situ emulsion polymerization and solution dispersion. The as‐prepared PCN materials obtained with both approaches were subsequently characterized with wide‐angle powder X‐ray diffraction and transmission electron microscopy. For a comparison of the anticorrosion performance, a PCN material (e.g., 3 wt % clay loading) prepared by in situ emulsion polymerization, showing better dispersion of the clay platelets in the polymer matrix, exhibited better corrosion protection in the form of a coating on a cold‐rolled steel coupon than that prepared by solution dispersion, which showed a poor dispersion of the clay nanolayers according to a series of electrochemical corrosion measurements. Comparative studies of the optical clarity, molecular barrier properties, and thermal stability of samples prepared in both ways, as membranes and fine powders, were also performed with ultraviolet–visible transmission spectroscopy, molecular permeability analysis, thermogravimetric analysis, and differential scanning calorimetry. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1936–1946, 2004     

Studies on heterogeneous nucleation effect of dispersing intercalated montmorillonite clay platelets in polyaniline matrix

In this article, a series of nanocomposite materials that consisted of emeraldine base (EB) of polyaniline (PANI) and montmorillonite (MMT) clay were prepared by effectively dispersing the inorganic MMT clay platelets into organic PANI matrix via in situ chemically oxidative polymerization. Organic aniline monomers were first intercalated into the interlayer regions of organophilic clay hosts and followed by an one‐step oxidative polymerization with ammonium persulfate as oxidant. The as‐synthesized PANI‐clay nanocomposite (PCN) materials were characterized by Fourier‐Transformation infrared spectroscopy and transmission electron microscopy. It should be noted that the EB of PANI in the presence of dispersed intercalated MMT clay platelets was found to display an observable enhancement in polymer crystallinity as compared with that of neat PANI based on series of investigations of wide‐angle powder X‐ray diffraction patterns and differential scanning calorimetric studies. This remarkable increase of polymer crystallinity might be resulted from the effective heterogeneous nucleation effect of dispersed clay platelets existed in PCN materials. The surface morphology study of PCN materials was further evaluated by polarizing optical microscopy, scanning electron microscopy, and atomic force microscopy. POLYM. COMPOS., 31:2049–2056, 2010. © 2010 Society of Plastics Engineers     

Enhancement of corrosion protection effect of poly(styrene‐co‐acrylonitrile) by the incorporation of nanolayers of montmorillonite clay into copolymer matrix

A series of polymer–clay nanocomposite (PCN) materials that consisted of poly(styrene‐co‐acrylonitrile) (PSAN) and layered montmorillonite (MMT) clay were successfully prepared by effectively dispersing the inorganic nanolayers of MMT clay into the organic PSAN matrix by a conventional in situ thermal polymerization. First of all, organic styrene and AN monomers at a specific feeding ratio were simultaneously intercalated into the interlayer regions of organophilic clay hosts and followed by a typical free‐radical polymerization with benzyl peroxide as initiator. The as‐synthesized PCN materials were subsequently characterized by FTIR spectroscopy, wide‐angle powder X‐ray diffraction, and transmission electron microscopy. The as‐prepared PCN materials, in the form of coatings, incorporated with low clay loading (e.g., 1 wt %) on cold‐rolled steel, were found to be much superior in corrosion protection over those of bulk PSAN based on a series of standard electrochemical measurements of corrosion potential, polarization resistance, and corrosion current in 5 wt % aqueous NaCl electrolyte. Molecular weights of PSAN extracted from PCN materials and bulk PSAN were determined by gel permeation chromatography with THF as eluant. Effects of the material composition on the molecular barrier and thermal stability of PSAN along with PCN materials, in the form of both membrane and fine powder, were also studied by molecular permeability analysis, differential scanning calorimetry, and thermogravimetric analysis, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2269–2277, 2004     

Effective enhancement of anticorrosive properties of polystyrene by polystyrene–clay nanocomposite materials

A series of polymer–clay nanocomposite (PCN) materials consisting of polystyrene (PS) and layered montmorillonite (MMT) clay was prepared by effectively dispersing the inorganic nanolayers of MMT clay in the organic PS matrix via in situ thermal polymerization. Organic styrene monomers were first intercalated into the interlayer regions of organophilic clay hosts, followed by a typical free radical polymerization with BPO as the initiator. The as‐synthesized PCN materials were characterized by infrared spectroscopy (IR), wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). PCN coatings with low clay loading (1 wt %) on cold‐rolled steel (CRS) were found to be superior in anticorrosion to those of bulk PS, based on a series of electrochemical measurements of corrosion potential, polarization resistance and corrosion current in a 5 wt % aqueous NaCl electrolyte. The molecular weights of PS extracted from PCN materials and bulk PS were determined by gel permeation chromatography (GPC) with tetrahydrofuran (THF) as the eluent. The effects of material composition on molecular barrier and thermal stability of PS and PCN materials, in the form of both free‐standing films and fine powders, were also studied by molecular permeability analysis, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1970–1976, 2004     

Enhanced corrosion prevention effect of polysulfone–clay nanocomposite materials prepared by solution dispersion

A series of polymer–clay nanocomposite (PCN) materials containing polysulfone (PSF) and layered MMT clay were successfully prepared by effectively dispersing inorganic nanolayers of MMT clay in an organic PSF matrix via a solution dispersion technique. The synthesized PCN materials were subsequently investigated with a series of characterization techniques, including Fourier transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The prepared PCN coatings with low clay loading (1 wt %) on cold‐rolled steel (CRS) were found to be superior in corrosion prevention to those of bulk PSF, based on a series of electrochemical measurements of corrosion potential, polarization resistance, corrosion current and electrochemical impedance spectroscopy (EIS) in a 5 wt % aqueous NaCl electrolyte. The effects of material composition on the molecular barrier, mechanical strength and optical clarity of PSF and PCN materials, in the form of membranes, was also studied by molecular permeability analysis (GPA), dynamic mechanical analysis (DMA) and UV‐Visible transmission spectra, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 631–637, 2004     

Preparation and properties of heterocyclically conjugated poly(3‐hexylthiophene)–clay nanocomposite materials

A series of heterocyclically conjugated polymer–clay nanocomposite (PCN) materials that consisted of organic poly(3‐hexylthiophene) (P3HT) and inorganic montmorillonite (MMT) clay platelets were prepared by in situ oxidative polymerization with FeCl₃ as an oxidant. The as‐synthesized PCN materials were characterized by Fourier transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (WAXRD), and transmission electron microscopy (TEM). The effects of the material composition on the anticorrosion, gas barrier, thermal stability, flammability, mechanical strength, and electrical conductivity properties of the P3HT and PCN materials were studied by electrochemical corrosion measurements, gas‐permeability analysis (GPA), thermogrametric analysis (TGA), limiting oxygen index (LOI) measurements, dynamic mechanical analysis (DMA), and a four‐point probe technique, respectively. The molecular weights of extracted and bulk P3HT were determined by gel permeation chromatography (GPC) with THF as an eluant. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3438–3446, 2004     

Enhancement of corrosion protection effect of poly(o-ethoxyaniline) via the formation of poly(o-ethoxyaniline)-clay nanocomposite materials

A series of polymer-clay nanocomposite (PCN) materials that consisted of emeraldine base of poly(o-ethoxyaniline) (PEA) and layered montmorillonite (MMT) clay were prepared by effectively dispersing the inorganic MMT clay platelets in organic PEA matrix via in situ oxidative polymerization. Organic o-ethoxyaniline monomers were first intercalated into the interlayer regions of organophilic clay hosts and were followed by a one-step oxidative polymerization. The as-synthesized PCN materials were characterized by Fourier transform infrared (FTIR) spectroscopy, wide-angle X-ray diffraction (XRD) and transmission electron microscopy (TEM).PCN materials at low clay loading up to 3 wt% in the form of coating (e.g. 0.5 wt%) on cold-rolled steel (CRS) were found to exhibit much superior corrosion inhibition effect as compared to those of the bulk PEA by performing a series of electrochemical measurements of corrosion potential, polarization resistance, corrosion current and impedance spectroscopy in 5 wt% aqueous NaCl electrolyte. Furthermore, it was found that a further increase of clay loading up to 3 wt% results in a slightly enhanced molecular barrier property of PCN materials. The molecular weights of PEA extracted from PCN materials and bulk PEA were determined by gel permeation chromatography (GPC) analysis with NMP as eluant. Effects of the material composition on the molecular barrier, thermal stability, electrical conductivity and optical properties of PEA along with a series of PCN materials, in the form of free-standing film, fine powder and solution, were also studied by molecular permeability measurements (GPA), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), four-point probe technique and UV-vis spectra.     

Synthesis and dielectric properties of poly(methyl methacrylate)–clay nanocomposite materials

Poly(methyl methacrylate) (PMMA)–clay nanocomposite (PCN) materials were synthesized through in situ intercalative polymerization. A cationic surfactant, [2(dimethylamino)ethyl]triphenylphosphonium bromide, was used as an intercalating agent with pristine Na⁺‐montmorillonite (MMT). The synthesized PCN materials were subsequently investigated by a series of characterization techniques, including wide‐angle powder X‐ray diffraction, Fourier transform IR spectroscopy, transmission electron microscopy, thermogravimetric analysis, and differential scanning calorimetry. Compared to pure PMMA, the PCN materials exhibit higher thermal degradation temperatures and glass‐transition temperatures. The dielectric properties of PCN blending with a commercial PMMA material in film form with clay loading from 0.5 to 5.0 wt % were measured under frequencies of 100 Hz–1 MHz at 35–100°C. Significantly depressed dielectric constants and losses were observed for these PCN‐blending materials. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2175–2181, 2005     

Poly(N‐vinylcarbazole)–clay nanocomposite materials prepared by photoinitiated polymerization with triarylsulfonium salt initiator

A series of polymer–clay nanocomposite (PCN) materials that consist of poly(N‐vinylcarbazole) (PNVC) and layered montmorillonite (MMT) clay are prepared by effectively dispersing the inorganic nanolayers of MMT in an organic PNVC matrix via in situ photoinitiated polymerization with triarylsulfonium salt as the initiator. Organic NVC monomers are first intercalated into the interlayer regions of the organophilic clay hosts, followed by one‐step UV‐radiation polymerization. The as‐synthesized PCN materials are typically characterized by Fourier transform IR spectroscopy, wide‐angle X‐ray diffraction, and transmission electron microscopy. The molecular weights of PNVCs extracted from the PCN materials and the bulk PNVC are determined by gel permeation chromatography analysis with tetrahydrofuran as the eluant. The morphological image of the synthesized materials is observed by an optical polarizing microscope. The effects of the material composition on the optical properties and thermal stability of PNVCs and a series of PCN materials (solution and fine powder) are also studied by UV–visible absorption spectra measurements, thermogravimetric analysis, and differential scanning calorimetry, respectively. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1904–1912, 2004     

Preparation and properties of polyimide–clay nanocomposite materials for anticorrosion application

A series of polymer–clay nanocomposite (PCN) materials that consist of organosoluble polyimide and layered montmorillonite clay were prepared by the solution dispersion technique. The organosoluble polyimide containing non‐coplanar moiety in diamine monomer and flexible bridging linkages in dianhydride monomer was synthesized by chemical imidization. The as‐synthesized PCN materials were characterized by infrared spectroscopy, wide‐angle powder X‐ray diffraction, and transmission electron microscopy. The organosoluble polyimide showed better corrosion resistance compared to polyaniline, poly(o‐ethoxyaniline) and poly(methyl methacrylate) by using a series of standard electrochemical corrosion measurements of corrosion potential, polarization resistance, and corrosion current in 5 wt % aqueous NaCl electrolyte. Polyimide–clay nanocomposite materials incorporated with low loading of clay were found to further improve corrosion inhibition over pure polyimide. Effects of the material composition on the O₂/H₂O molecular permeability, optical clarity, and thermal properties of polyimide–clay nanocomposite materials were studied by molecular permeability analysis, UV–visible transmission spectra, thermogravimetric analysis, and differential scanning calorimetry, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3573–3582, 2004     

Preparation and properties of (BATB–ODPA) polyimide–clay nanocomposite materials

A series of polymer–clay nanocomposite (PCN) materials consisting of 1,4‐bis(4‐aminophenoxy)‐2‐tert‐butylbenzene–4,4′‐oxydiphthalic anhydride (BATB–ODPA) polyimide (PI) and layered montmorillonite (MMT) clay were successfully prepared by an in situ polymerization reaction through thermal imidization up to 300°C. The synthesized PCN materials were subsequently characterized by Fourier‐Transform infrared (FTIR) spectroscopy, wide‐angle powder X‐ray diffraction (XRD) and transmission electron microscopy (TEM). The effects of material composition on thermal stability, mechanical strength, molecular permeability and optical clarity of bulk PI and PCN materials in the form of membranes were studied by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), molecular permeability analysis (GPA) and ultraviolet‐visible (UV/VIS) transmission spectra, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1072–1079, 2004     

Structure and properties of poly(o‐methoxyaniline)–clay nanocomposite materials

In this study, we prepared a series of polymer–clay nanocomposite (PCN) materials that consisted of an emeraldine base of poly(o‐methoxyaniline) and layered montmorillonite. Organic o‐methoxyaniline monomers were first intercalated into the interlayer regions of organophilic clay hosts followed by a one‐step in situ oxidative polymerization. The as‐synthesized PCN materials were subsequently characterized by FTIR spectroscopy, wide‐angle powder X‐ray diffraction, and transmission electron microscopy. The molecular weights of PMA extracted from PCN materials and bulk PMA were determined by GPC with THF as eluant. Effects of the material composition on the thermal stability, flame resistance, electrical conductivity, and corrosion inhibition performance of PMA, along with a series of PCN materials in the form of fine powder and coating, were also studied by TGA, limiting oxygen index measurements, four‐point probe technique, and electrochemical corrosion measurements, respectively. Morphological images of as‐synthesized materials were also investigated by SEM. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 1072–1080, 2003     

Preparation and properties of poly(vinyl alcohol)-clay nanocomposite materials

A series of polymer-clay nanocomposite (PCN) materials that consist of poly(vinyl alcohol) (PVA) and layered montmorillonite (MMT) clay are prepared by effectively dispersing the inorganic nanolayers of MMT clay in organic PVA matrix via an in situ free radical polymerization with AIBN as initiator. Organic vinyl acetate monomers are first intercalated into the interlayer regions of organophilic clay hosts and followed by a one-step free radical polymerization. The prepared poly(vinyl acetate)-clay (PVAc-clay) solution are then saponified via direct-hydrolysis with NaOH solution to form PVA-clay nanocomposite materials. The as-synthesized PCN materials are typically characterized by Fourier-Transformation infrared (FTIR) spectroscopy, wide-angle X-ray diffraction and transmission electron microscopy.The molecular weights of poly(vinyl alcohol) (PVA) extracted from polymer-clay nanocomposite (PCN) materials and bulk PVA are determined by gel permeation chromatography (GPC) analysis with THF as eluant. The viscosity property of PCN materials with different feeding amount of MMT clay is studied by an ubbelohode capillary viscometer. The morphological image of as-synthesized materials is studied by scanning electron microscopy (SEM) and optical polarizing microscope (OPM). Effects of the material composition on the thermal stability, mechanical strength, optical clarity of PVA along with a series of PCN materials, in the form of fine powder and free-standing film, are also studied by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), dynamic mechanical analyzer (DMA) and UV-visible transmission spectra, respectively.     

Mechanical properties of polystyrene‐montmorillonite nanocomposites—Prepared by melt intercalation

A series of polymer‐clay nanocomposite (PCN) materials, consisting of thermoplastic polystyrene (PS) sample and dispersing inorganic organoclay platelets, were successfully prepared. First, organoclay was prepared by performing cationic exchange reactions between the sodium ions existing in the interlayer region of the clay mineral and intercalation agent, followed by dispersing the organophilic clay into a PS basis through the melt intercalation approach performed by a twin‐screw mixing method. The as‐prepared PCN materials in the form of a pellet subsequently characterized using the powder X‐ray diffraction (XRD) and the transmission electron microscopy (TEM). In this study, it is found that the wear resistance of PS to be effectively enhanced by the incorporation of low loading organophilic clay platelets. The surface morphological image for the neat PS and PS‐clay after a wear resistance test has also been compared and identified by the scanning electron microscopy (SEM). Furthermore, the effect of organoclay on three other different measurement types of mechanical properties for as‐prepared PCN materials, e.g., flexural tests, impact tests, and micron‐nano indenter tests were performed and compared. Generally, PCN materials exhibited an obvious enhancement of mechanical properties of neat polymer by an incorporated low loading of organophilic clay platelets into a polystyrene matrix used for the evaluation of mechanical properties as‐prepared samples. For example, mechanical strength (excepting flexural strength) almost remain same beyond 3 wt % clay loading in PS, whereas much detrimental effect being observed in the wear loss in case of PCNs with 5 wt % clay than 3 wt %. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Effect of organoclay on the thermal stability,mechanical strength,and surface wettability of injection‐molded ABS–clay nanocomposite materials prepared by melt intercalation

In this article, a series of polymer–clay nanocomposite (PCN) materials consisted of commercial thermoplastic ABS matrix and dispersing inorganic organoclay platelets were successfully prepared by melt intercalation through the twin‐roller mixer. The as‐prepared materials in the form of pellet were then shaped by injection‐molding machine and the as‐molded specimens were subsequently examined by chemical characterizations, through Fourier transformation infrared (FTIR) spectroscopy, powder X‐ray diffraction (XRD), and transmission electron microscopy (TEM). Effect of the organoclay on thermal stability, mechanical strength, and surface wettability of PCN materials, in both the form of standard dumbbell shape and pellet, was studied using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), tensile test, hardness test, and contact‐angle measurements, respectively. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99; 1576–1582, 2006     

Advanced anticorrosive materials prepared from amine-capped aniline trimer-based electroactive polyimide-clay nanocomposite materials with synergistic effects of redox catalytic capability and gas barrier properties

In this study, preparation and electrochemical corrosion protection studies of a series of polyimide-Clay nanocomposite (PCN) materials were first presented. Subsequently, the as-prepared PCN materials were characterized by FTIR, XRD and TEM studies. In-situ monitoring for redox behavior of as-prepared PCN materials was identified by UV-visible and CV studies.It should be noted that PCN coating was found to reveal advanced corrosion protection effect on cold-rolled steel (CRS) electrode as compared to that of neat non-electroactive polyimide coating based on series of electrochemical corrosion measurements in 5 wt% NaCl electrolyte. Enhancement of corrosion protection of PCN coatings on CRS electrode may be interpreted by following two possible reasons: (1) redox catalytic capabilities (i.e., electroactivity) of ACAT units existed in electroactive PCN may induce formation of passive metal oxide layers on CRS electrode, as evidenced by SEM and ESCA studies. (2) well-dispersed layered organophilic clay platelets embedded in electroactive PCN matrix could functioned as hinder with high aspect ratio to effectively enhance the oxygen barrier property of PCN, as evidenced by GPA.     

Comparative studies on the corrosion protection effect of DBSA-doped polyaniline prepared from in situ emulsion polymerization in the presence of hydrophilic Na-MMT and organophilic organo-MMT clay platelets

A series of polyaniline (PANI)/Na⁺-montmorillonite (MMT) clay and PANI/organo-MMT nanocomposite materials have been successfully prepared by in situ emulsion polymerization in the presence of inorganic nanolayers of hydrophilic Na⁺-MMT clay or organophilic organo-MMT clay with DBSA and KPS as surfactant and initiator, respectively. The as-synthesized Na⁺-PCN and organo-PCN materials were characterized and compared by Fourier transformation infrared (FTIR) spectroscopy, wide-angle powder X-ray diffraction (XRD) and transmission electron microscopy (TEM).Na⁺-PCN materials in the form of coatings with low loading of Na⁺-MMT clay (e.g., 3 wt.%, CLAN3) on cold-rolled steel (CRS) were found much superior in corrosion protection over those of organo-PCN materials with same clay loading based on a series of electrochemical measurements of corrosion potential, polarization resistance, corrosion current and impedance spectroscopy in 5 wt.% aqueous NaCl electrolyte. The molecular weights of PANI extracted from PCN materials and neat PANI were determined by gel permeation chromatography (GPC) with NMP as eluant. Effects of material composition on the gas permeability, optical properties and electrical conductivity of neat PANI and a series of PCN materials, in the form of free-standing film, solution and powder-pressed pellet, were also studied by gas permeability analyzer (GPA), ultraviolet-vis spectra and four-point probe technique, respectively.     

Preparation and characterization of electronically conducting polypyrrole-montmorillonite nanocomposite and its potential application as a cathode material for oxygen reduction

Simple wet chemical processes were deployed to prepare low-cost conducting nanocomposites based on natural clays with 2:1 layered structures such as sodium montmorillonite (MMT). Ce(IV) modified MMT was used for the spontaneous polymerization of pyrrole within clay interlayers. The resulted clay-conducting polypyrrole nanocomposites containing the reduced form of the oxidising agent, have been extensively characterized by X-ray diffraction (XRD) technique for interlayer spacing variations and by Fourier transform infra red (FT-IR) spectroscopy to study the interactions between the clay and polymer functional groups. DC polarization technique with both blocking and non-blocking electrodes was used to distinguish between the ionic and electronic transport numbers and to recognize the type of mobile ionic species. AC impedance analysis further resolved the electrical conduction of these materials. Bulk conductivity analysis implied that the polypyrrole (PPY) formed within Ce(IV) modified MMT posses dominant electronic conductivity. The low-cost, light-weight and stable polymer-clay nanocomposite prepared by Ce(IV) intercalated MMT, [Ce(III)-PPY-MMT], seems to be a promising cathode material for oxygen reduction and hence may find applications in fuel cell industries.     

High‐performance polyimide–clay nanocomposite materials based on a dual intercalating agent system

BACKGROUND: Polymer–clay nanocomposites (PCNs) have attracted considerable interest in recent years owing to their unique physical and chemical properties that lead to a wide range of applications. A series of PCN materials consisting of polyimide and layered montmorillonite (MMT) clay were successfully prepared by in situ polymerization. RESULTS: Silicate layers are better dispersed in polymer matrices when dual intercalating agents (hexadecyltrimethylammonium bromide–4,4′‐oxydianiline) are applied for MMT modification according to wide‐angle X‐ray diffraction and transmission electron microscopy studies. Effects of single and dual intercalating agents on thermal stability, mechanical strength and the molecular barrier of PCN materials consisting of organo‐modified MMT were studied by means of thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analyses, gas permeability analysis and vapor permeability analysis. CONCLUSION: Improved thermal and mechanical stabilities, as well as barrier properties were observed for the PCN materials containing dual intercalating agent‐modified MMT. Copyright © 2008 Society of Chemical Industry