Antibacterial and photocatalytic properties of Ag/TiO2/ZnO nano-flowers prepared by facile one-pot hydrothermal process

In this paper, a simple and efficient strategy of one-pot synthesis of Ag doped TiO₂/ZnO photocatalyst was developed using hydrothermal process. Simultaneous crystallization of Ag and ZnO crystals from their precursor solution containing P25 (TiO₂) NPs could form effectively bonded Ag/TiO₂/ZnO composite photocatalyst during hydrothermal treatment. Several analytical techniques, including scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), FT-IR spectroscopy, and photoluminescence spectroscopy have been used to characterize the resulting Ag/TiO₂/ZnO photocatalyst. Results showed that ZnO nano-flowers doped with TiO₂ and Ag NPs were formed by this simple facile one-step process. The unique properties of Ag NPs on binary semiconductor composite not only provide the decreased rate of electron–hole separation but also prevent from the loss of photocatalyst during recovery due to the fixed attachment of Ag and TiO₂ NPs on the surface of flower shaped large ZnO particles. Therefore, as-synthesized composite is an economically and environmentally friendly photocatalyst.     

Highly visible light responsive metal loaded N/TiO2 nanoparticles for photocatalytic conversion of CO2 into methane

Photocatalytic reduction of carbon dioxide (CO₂) into valuable hydrocarbon such as methane (CH₄) using water as reducing agent is a good strategy for environment and energy applications. In this study, a facile and simple sol-gel method was employed for the synthesis of metal (Cu and Ag) loaded nanosized N/TiO₂ photocatalyst. The prepared photocatalysts were characterized by X-ray diffraction, transmission electron microscopy, BET Surface area analyzer, X-ray photoelectron spectroscopy and UV–vis diffuses reflectance spectroscopy. The photocatalytic conversion of CO₂ into methane was carried out under visible light irradiation (λ≥420 nm) by prepared photocatalysts in order to evaluate the photocatalytic efficiency. The results demonstrate that Ag loaded N/TiO₂ showed enhanced photocatalytic performance for methane production from CO₂ compared to other Cu–N/TiO₂, N/TiO₂ and TiO₂ photocatalysts. The improvement in the photocatalytic activity could be attributed to high specific surface area, extended visible light absorption and suppressed recombination of electron – hole pair due to synergistic effects of silver and nitrogen in the Ag–N/TiO₂ photocatalyst. This study demonstrates that Ag–N/TiO₂ is a promising photocatalytic material for photocatalytic reduction of CO₂ into hydrocarbons under visible light irradiation.     

Increasing of Photocatalytic Performance of TiO2 Nanotubes by Doping AgS and CdS

Highly ordered titanium nanotubes (TiO₂ NTs) photocatalyst was prepared by the anodic oxidation method, and AgS, CdS, and AgS/CdS nanoparticles were doped on the surface of TiO₂ NTs by the successive ion adsorption and reaction (SILAR) method. The photocatalysts were characterized by SEM, EDS, XRD, and potentiostat system. The SEM and EDS analyses respectively show that the average outer diameter of prepared photocatalysts is in the range of 50–120?nm, and the presence of Ti, O, Ag, and Cd is successfully proved. The photocatalytic properties of TiO₂ NTs and doped TiO₂ NTs were studied by measuring the degradation of Methylene Blue (MB) solution. The experimental results show that AgS/CdS/TiO₂ photocatalyst exhibited most efficient photocatalytic activity with 340?µA/cm² photocurrent value. AgS/CdS/TiO₂ NTs photocatalyst shows up to 22.20% higher than TiO₂ NTs, 16.42% higher than CdS/TiO₂ NTs, and 4.3% higher than AgS/TiO₂ NTs.     

A novel approach for the synthesis of highly active ZnO/TiO2/Ag2O nanocomposite and its photocatalytic applications

The present work is focused on the preparation of hybrid ZnO/TiO₂/Ag₂O nanocomposite for enhanced photocatalytic activity. The resultant samples are characterized by using XRD, SEM, EDX, HR-TEM, UV-DRS, BET and XPS techniques. X-ray diffraction analysis indicates the co-existence of wurtzite, anatase and cubic phases in ZnO/TiO₂/Ag₂O nanocomposite. The band gap energy value of the photocatalyst is 3.39 eV, which has been evidenced from UV–visible diffuse reflectance spectroscopy measurements. Photocatalytic degradation of methylene blue dye has been investigated by using UV–visible spectrophotometer. From the result, it has been concluded that ZnO/TiO₂/Ag₂O nanocomposite has proven to be an efficient photocatalyst under UV irradiation when compared to that of mono and binary oxide systems. Further, the possible photodegradation mechanism is proposed to support the enhancement of photocatalytic activity towards degradation of dyes.     

Photocatalytic reduction of N2O on metal-supported TiO2 powder at room temperature in the presence of H2O and CH3OH vapor

Ag- and Cu-supported TiO₂ photocatalysts showed high activity for the reduction of N₂O to N₂ at room temperature in the presence of CH₃OH and H₂O vapor. The suppression by H₂O on the activity was not observed in the present photocatalyst system. The remarkable behavior of the Ag and Cu co-catalysts for TiO₂ photocatalysts agreed well with that of electro- and thermal catalyses. This revised version was published online in July 2006 with corrections to the Cover Date.     

Enhancement of the photocatalytic performance of Ag-modified TiO2 photocatalyst under visible light

A highly visible-light photocatalytic active Ag-modified TiO₂ (Ag–TiO₂) was prepared by a simple sol–gel process using TiOSO₄ as the starting material, AgNO₃ as a silver doping source, and hydrazine as a reducing agent. The prepared Ag–TiO₂ samples were characterized by several techniques such as X-ray powder diffraction (XRD), BET surface area measurement, scanning electron microscopy (SEM), transmission electron microscopy (TEM), inductively coupled plasma optical emission spectroscopy (ICP-OES), energy dispersive X-ray spectrometry (EDX), X-ray absorption spectroscopy (XAS) and UV–vis diffuse reflectance spectroscopy (DRS). The Ag–TiO₂ photocatalyst, a mixture of amorphous and anatase phases, has a high surface area. The silver contents in the Ag–TiO₂ samples were determined by ICP measurements. The diffused reflectance UV–vis spectra indicated that the Ag–TiO₂ samples exhibited higher red shifts compared with the undoped TiO₂ sample. Indigo carmine degradation under visible irradiation indicated that the Ag–TiO₂ catalyst gave higher photocatalytic efficiency than those of commercial P25-TiO₂ and undoped-TiO₂ samples. The Ag–TiO₂ catalyst can be reused many times without any additional treatment.     

A sonochemical route to fabricate the novel porous F, Ce-codoped TiO2 photocatalyst with efficient photocatalytic performance

A novel F, Ce-codoped TiO₂ photocatalyst with mesoporous structure was successfully fabricated by ultrasound irradiation. The obtained catalysts were characterized by X-ray diffraction, Fourier transform infrared spectrum, X-ray photoelectron spectroscopy, UV?Cvis diffuse reflectance spectra, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, photoluminescence spectroscopy, and N₂ adsorption. The photocatalytic activity of the samples was evaluated by degradation of acid orange II under UV light irradiation. Results showed that F and Ce can be successfully doped into TiO₂ under ultrasonic irradiation conditions. All the single F or Ce-doped TiO₂ and F, Ce-codoped TiO₂ have shown good mesoporous structures, and this can be contributed to the ultrasound-induced aggregation effect. The F, Ce-codoped TiO₂ photocatalyst exhibits much higher photocatalytic activity than that of pure, single F or Ce-doped TiO₂, which could be attributed to that F, Ce-codoping increases its surface hydroxyl groups and effectively reduces the photo-generated electron/hole pair recombination rate.     

Microwave photocatalysis III. Transition metal ion‐doped TiO2 thin films on mercury electrodeless discharge lamps: preparation,characterization and their effect on the photocatalytic degradation of mono‐chloroacetic acid and Rhodamine B

BACKGROUND: Mercury electrodeless discharge lamps (Hg‐EDLs) were used to generate UV radiation when exposed to a microwave field. EDLs were coated with doped TiO₂ in the form of thin films containing transition metal ions Mⁿ⁺ (M = Fe, Co, Ni, V, Cr, Mn, Zr, Ag). Photocatalytic degradation of mono‐chloroacetic acid (MCAA) to HCl, CO₂, and H₂O, and decomposition of Rhodamine B on the thin films were investigated in detail. RESULTS: Polycrystalline thin doped TiO₂ films were prepared by dip‐coating of EDL via a sol–gel method using titanium n‐butoxide, acetylacetone, and a transition metal acetylacetonate. The films were characterized by Raman spectroscopy, UV/Vis absorption spectroscopy, X‐ray photoelectron spectroscopy (XPS), electron microprobe analysis and by atomic force microscopy (AFM). The photocatalytic activity of doped TiO₂ films was monitored in the decomposition of Rhodamine B in water. Compared with the pure TiO₂ film, the UV/Vis spectra of V, Zr and Ag‐doped TiO₂ showed significant absorption in the visible region, and hence the photocatalytic degradation of MCAA had increased. The best apparent degradation rate constant (0.0125 min^?1), which was higher than that on the pure TiO₂ film by a factor of 1.7, was obtained with the Ag(3%)/TiO₂ photocatalyst. The effect of doping level of vanadium acetylacetonate on the photocatalytic efficiency of the V‐doped TiO₂ was determined. CONCLUSIONS: Transition metal ion‐doped TiO₂ thin films showed significant absorption in the visible region. The metal doped TiO₂ photocatalyst (with an appropriate amount of V, Zr and Ag) on the Hg‐EDLs increased the degradation efficiency of MCAA in a microwave field. Copyright © 2009 Society of Chemical Industry     

Construction of ternary Ag@ZnO/TiO2 fibrous membranes with hierarchical nanostructures and mechanical flexibility for water purification

Rational design of semiconductor membrane photocatalyst with good mechanical flexibility and excellent photocatalytic activity is of significance for environmental remediation. Herein, flexible Ag@ZnO/TiO₂ fibrous membranes with hierarchical nanostructures were fabricated through combining a simple electrospinning method and subsequent hydrothermal reaction and photodeposition process. In the ternary nanocomposite, ZnO nanorods were firmly anchored onto TiO₂ nanofibers, while Ag nanoparticles were evenly decorated on the surface of both ZnO and TiO₂. Benefiting from the improved light absorption, large surface area, and effective charge separation, the resultant Ag@ZnO/TiO₂ membranes displayed superior photocatalytic degradation efficiency of 91.6% toward tetracycline hydrochloride within 1 h, and also exhibited prominent antibacterial activity with a 6.5 log inactivation of E. coli after 1 h simulated solar light exposure. Significantly, the membrane photocatalyst still preserved structural integrity and mechanical flexibility after utilization. This study provides an alternative approach for designing and synthesizing flexible TiO₂-based membrane photocatalysts toward high-efficiency water purification.     

Enhanced photoresponse and photocatalytic activities of graphene quantum dots sensitized Ag/TiO2 thin film

TiO₂ thin films were fabricated through hydrothermal method. Silver nanoparticles were loaded on TiO₂ thin films via photoreduction technique. Subsequently, the graphene quantum dots (GQDs) were spin‐coated on the Ag/TiO₂ nanocomposites thin films. The crystal structure, surface morphology and UV‐vis absorbance were tested by XRD, SEM and ultraviolet‐visible spectrophotometer. These results indicated that Ag nanoparticles and GQDs are anchored on the TiO₂ nanorods. Absorbance of Ag/TiO₂ and GQDs/Ag/TiO₂ nanocomposite thin films have been extended into the visible region. Visible‐light response of the samples were investigated by electrochemical workstation. The photoresponse of the sample can be enhanced by sensitization of the Ag nanoparticles and GQDs. The enhanced visible‐light response may be due to the surface plasmon resonance of silver nanoparticles and visible absorbance of GQDs. The highest photocatalytic activity has been observed in the 9‐GQDs/Ag/TiO₂ composite thin film. The efficient charge separation and transportation can be achieved by introducing the Ag nanoparticles and GQDs in the TiO₂ thin film.     

Electrochemical synthesis and in situ spectroelectrochemistry of conducting polymer nanocomposites. I. polyaniline/TiO2, polyaniline/ZnO,and polyaniline/TiO2+ZnO

The polyaniline (PAn), polyaniline/titanium dioxide (PAn/TiO₂), polyaniline/zinc oxide (PAn/ZnO), and a novel conducting polymer nanocomposites, polyaniline/titanium dioxide + zinc oxide (PAn/TiO₂+ZnO), were synthesized by in situ electropolymerization and potential cycling on gold electrode. The PAn and nanocomposite films were characterized by cyclic voltammetry, Fourier transform infra‐red (FTIR) spectroscopy, in situ resistivity measurements, in situ UV–Visible, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The differences between cathodic and anodic peaks of three redox couples were obtained for PAn and polymeric nanocomposite films. During cathodic and anodic scans, the shift of potential was observed for polymer nanocomposite films. The characteristic FTIR peaks of PAn were found to shift to lower wavelengthsin polymer nanocomposite films. These observed effects have been attributed to interaction of TiO₂, ZnO, and TiO₂+ZnO particles with PAn molecular chains. Significant differences from in situ resistivity of PAn and nanocomposite films were obtained. The resistance of PAn/TiO₂, PAn/ZnO, and PAn/TiO₂+ZnO films were found to be smaller than the PAn film. The in situ UV–Visible spectra for Pan and polymer nanocomposite films were studied. The results show the intermediate spectroscopic properties between PAn and polymer nanocomposite films. The morphological analyses of PAn and nanocomposite films have been investigated. The nanocomposites SEM and TEM micrographs suggest that the inorganic semiconductor particles were incorporated in organic conducting polymer, which consequently modifies the morphology of the films significantly. POLYM. COMPOS., 35:351–363, 2014. © 2013 Society of Plastics Engineers     

Conductive and transparent multilayer films for low-temperature TiO2/Ag/SiO2 electrodes by E-beam evaporation with IAD

Conductive and transparent multilayer thin films consisting of three alternating layers (TiO₂/Ag/SiO₂, TAS) have been fabricated for applications as transparent conducting oxides. Metal oxide and metal layers were prepared by electron-beam evaporation with ion-assisted deposition, and the optical and electrical properties of the resulting films as well as their energy bounding characteristics and microstructures were carefully investigated. The optical properties of the obtained TAS material were compared with those of well-known transparent metal oxide glasses such as ZnO/Ag/ZnO, TiO₂/Ag/TiO₂, ZnO/Cu/ZnO, and ZnO/Al/ZnO. The weathering resistance of the TAS film was improved by using a protective SiO₂ film as the uppermost layer. The transmittance spectra and sheet resistance of the material were carefully measured and analyzed as a function of the layer thickness. By properly adjusting the thickness of the metal and dielectric films, a low sheet resistance of 6.5 ohm/sq and a high average transmittance of over 89% in the 400 to 700 nm wavelength regions were achieved. We found that the Ag layer played a significant role in determining the optical and electrical properties of this film.     

Facet engineered TiO2 hollow sphere for the visible-light-mediated degradation of antibiotics via ligand-to-metal charge transfer

Efficient removal of tetracycline (TC) under visible-light irradiation over TiO₂-based photocatalysts remains a challenge based on the fact that the reported photocatalytic systems still suffer from weak visible-light absorption and/or inefficient charge separation. Herein, we constructed {101} and {001} facets co-exposed TiO₂ hollow sphere (001-HT) via a gentle NaF treatment, in which the hollow mesoporous feature can trap incident light for a long time to improve photons efficiently. Meanwhile, the as-formed facet heterojunction significantly facilitates the charge separation. As a result, the 001-HT exhibits a high removal rate (~90.1%) of TC under visible-light irradiation, beyond the values of many reported TiO₂-based photocatalysts. Most importantly, we further expound the ligand-to-metal charge transfer mechanism towards TiO₂-assisted degradation of TC under visible-light irradiation, which effectively clarifies the confusion about the origin of pure TiO₂ visible-light activity towards TC degradation because both TiO₂ and TC do not exhibit any visible-light catalytic activity. Therefore, this work provides a new insight in revealing the mechanism of visible-light-mediated TC degradation over pure TiO₂ photocatalyst.     

Photocatalytic Decomposition of Formic Acid Under Visible Light Irradiation Over V-ion-implanted TiO2 Thin Film Photocatalysts Prepared on Quartz Substrate by Ionized Cluster Beam (ICB) Deposition Method

Unique visible-light-responsive TiO₂ photocatalysts (λ>450 nm) were successfully developed by implantation of V ions into the TiO₂ thin films prepared on a quartz substrate by an ionized cluster beam (ICB) deposition method. After V ions implantation into TiO₂ thin film, the photocatalytic activity of the thin films for the decomposition of formic acid into CO₂ and H₂O was found to proceed efficiently under visible light irradiation longer than 450 nm. The TiO₂ thin film photocatalysts were characterized by XRD, UV-vis, XPS, FE-SEM and AFM.     

Preparation of calcined hydrotalcite/TiO2-Ag composite and enhanced photocatalytic properties

A series of calcined hydrotalcite/TiO₂-Ag (HTC/TiO₂-Ag) composites with different silver (Ag) contents were successfully prepared and investigated as a catalyst for the photodegradation of phenol using UV–vis light (λ>300 nm). The Ag nanoparticles were deposited on the surface of TiO₂ (TiO₂-Ag) through photodeposition method. The TiO₂-Ag nanoparticles were supported on hydrotalcite (HT) by the co-precipitation method at variable pH (HT/TiO₂-Ag), and then calcined at 500 °C to obtain the HTC/TiO₂-Ag composites. The composites were characterized by inductively coupled plasma mass spectrometry (ICP-MS), N₂ adsorption/desorption (BET), X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Fourier transform infrared spectroscopy (FTIR), and diffuse reflectance spectra (DRS). Results show that there is an optimum silver ratio to obtain the highest photocatalytic performance in the HTC/TiO₂-Ag photocatalyst which is 2 wt%, and is assigned as HTC/TiO₂-Ag(2). The association of silver nanoparticles on TiO₂ enhanced photocatalytic activity of the bare semiconductor composite. Only 56% of phenol was photodegraded when photodegradation was performed with HTC/TiO₂, whereas ~100% was photodegraded using HTC/TiO₂-Ag(2). The data gathered from the photocatalytic degradation of phenol were successfully fitted to Langmuir-Hinshelwood model, and can be described by pseudo-first order kinetics. The results showed the HTC/TiO₂-Ag(2) as efficient photocatalyst, low cost, separable from solution by sedimentation, and reusable. The superior performance of HTC/TiO₂-Ag(2) composite photocatalyst may be attributed to the synergic catalytic effect between silver and TiO₂, dispersion of TiO₂-Ag(2) nanoparticles supported on calcined hydrotalcite, and the calcined hydrotalcite like photocatalyst.     

Ultrasonic-assisted pH Swing Method for the Synthesis of Highly Efficient TiO2 Nano-size Photocatalysts

A new route for the preparation of nanocrystalline TiO₂ particles based on the pH swing method assisted by ultrasonic irradiation in the presence of a surfactant (Pluronic P-123) has been successfully achieved. The prepared TiO₂ catalysts were calcined from 400 to 800 °C and characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), Fourier transformed infra-red spectroscopy (FTIR), gas adsorption measurements (BET) and thermogravimetirc measurements (TAG/DTA) analyses. Characterization results revealed that the enhancement in the particle size of TiO₂ by the pH swing method could be controlled by combining the pH swing with ultrasonic irradiation. Increasing the calcination temperatures led to an increase in both the particle and pore size, whereas the surface area and pore volume gradually decreased. A synergistic effect was observed in the combined process of pH swing with ultrasonication, yielding small TiO₂ particles as well as high surface area, pore volume, pore diameter, and crystalline anatase phase. The activity of the catalysts was investigated for the oxidation of 4-chlorophenol (4-CP). TiO₂ prepared with 15 times pH swing and calcined at 700 °C was found to show the highest rate for the oxidative degradation of 4-CP when compared to the TiO₂ sample prepared with just 1 time pH swing and to the commercial P-25 TiO₂ Degussa photocatalyst. Thus, a novel approach in controlling the various physico-chemical parameters of TiO₂ nanoparticles was developed.     

Photocatalytic Cyanide Oxidation from Aqueous Copper Cyanide Solutions over TiO2 and ZnO

The elimination of cyanide from aqueous copper cyanide solutions by oxidation under UV illumination using titanium oxide (TiO₂) and zinc oxide (ZnO) as catalyst has been investigated. The study has been carried out by determining the yield of cyanide elimination at different irradiation times, initial cyanide concentrations and pH. It has been observed that cyanide is photo-oxidised with higher yields in presence than in absence of copper in solution when TiO₂ is used as photocatalyst, while the opposite behaviour is reported when ZnO is the photocatalyst employed. This fact is related with the feasibility in which copper species are able to react with photogenerated electrons in the conduction band of the TiO₂ particles. Finally, the elimination of cyanide, both free and complexed, from a sample of an electroplating bath has also been studied. The results show that the photocatalytic method is very efficient in the elimination of cyanide in aqueous dilute solutions.     

Photocatalytic activity of TiO2 supported on multi-walled carbon nanotubes under simulated solar irradiation

TiO₂ particles supported on multi-walled carbon nanotubes (MWCNTs) were prepared using a sol–gel method to investigate their photocatalytic activity under simulated solar irradiation for the degradation of methyl orange (MO) in aqueous solution. The prepared composites were analyzed using XRD, SEM, EDS and UV–vis absorption spectroscopy. The results of this study indicated that there was little difference in the shape and structure of MWCNTs/TiO₂ composite and pure TiO₂ particles. The composite exhibited enhanced absorption properties in the visible light range compared to pure TiO₂. The degradation of MO by MWCNTs/TiO₂ composite photocatalysts was investigated under irradiation with simulated solar light. The results of this study indicated that MWCNTs played a significant role in improving photocatalytic performance. Different amounts of MWCNTs had different effects on photodegradation efficiency, and the most efficient MO photodegradation was observed for a 2% MWCNT/TiO₂ mass ratio. Photocatalytic reaction kinetics were described using the Langmuir–Hinshelwood (L–H) model. The photocatalyst was reused for eight cycles, and it retained over 95.2% photocatalytic degradation efficiency. Possible decomposition mechanisms were also discussed. The results of this study indicated that photocatalytic reactions with TiO₂ particles supported on MWCNTs under simulated solar light irradiation are feasible and effective for degrading organic dye pollutants.     

Ag nanoparticles loaded TiO2/MWCNT ternary nanocomposite: A visible-light-driven photocatalyst with enhanced photocatalytic performance and stability

A visible light active photocatalyst, Ag/TiO₂/MWCNT was synthesized by loading of Ag nanoparticles onto TiO₂/MWCNT nanocomposite. The photocatalytic activity of Ag/TiO₂/MWCNT ternary nanocomposite was evaluated for the degradation of methylene blue dye under UV and visible light irradiation. Ag/TiO₂/MWCNT ternary nanocomposite exhibits (~9 times) higher photocatalytic activity than TiO₂/MWCNT and (~2 times) higher than Ag/TiO₂ binary nanocomposites under visible light irradiation. The enhancement in the photocatalytic activity is attributed to the synergistic effect between Ag nanoparticles and MWCNT, which enhance the charge separation efficiency by Schottky barrier formation at Ag/TiO₂ interface and role of MWCNT as an electron reservoir. Effect of different scavengers on the degradation of methylene blue dye in the presence of catalyst has been investigated to find the role of photogenerated electrons and holes. Simultaneously, the Ag/TiO₂/MWCNT shows excellent photocatalytic stability. This work highlights the importance of Ag/TiO₂/MWCNT ternary nanocomposite as highly efficient and stable visible-light-driven photocatalyst for the degradation of organic dyes.     

Fast monitoring of organic dye degradation coupled with a colorimetric approach in a Ag-modified TiO2 nanotube photocatalytic system

Monitoring the contents of organic dyes in real-time is crucial for the valuation of photocatalyst performance. To achieve this, a method of detecting organic dyes was designed based on color variations by using Ag nanoparticle modified TiO₂ nanotubes (Ag/TiO₂) as photocatalysts. The obtained Ag/TiO₂ photocatalyst possesses strong visible-light absorption, and 1.0% Ag/TiO₂ exhibited the best performance under UV and simulated sunlight. The investigation indicates that the photocatalytic activity of TiO₂ nanotubes is greatly improved by the modification with silver. Moreover, the photodegradation intermediates and pathways are demonstrated by trapping experiments and density functional theory calculations. To quantitatively determine the concentration of methyl orange, a partial least squares model was built using RGB values and the concentration of a methyl orange solution. This finding provides a new idea to fabricate a sensor for point-of-care test of organic dyes in the field of environmental applications.