Hybrid wideband dual‐cylindrical circularly polarized dielectric resonator antennas excited with S‐shaped microstrip feed for sub‐6 GHz frequency range

In this article, a hybrid microstrip fed dual‐cylindrical dielectric resonator antenna (dual‐CDRA) has been proposed for the sub‐6 GHz band application with a wide circular polarization band. The proposed hybrid microstrip feed cylindrical dielectric resonator antenna utilizes an S‐shaped microstrip feed line to excite fundamental HE_11δ like mode and hybrid mode in dual‐CDRAs. The presented antenna structures are acting as monopole antenna separately with 48.75% (3.88‐6.38 GHz) bandwidth whereas both radiators called dual‐CDRAs enhances the bandwidth up to 93.06% (2.16‐5.92 GHz) in addition with an axial ratio bandwidth of 15.2% (3.52‐4.1 GHz). The proposed antenna is applicable for WiMAX (3.4‐3.69 GHz), and WLAN application of 802.11d and 8.02.11e IEEE standard. For validation of simulated results, an antenna prototype has been fabricated and experimentally verified. A good agreement between simulation and measured results are obtained. The simulation results have been carried out by using Ansys HFSS 14.0 version software.     

Dual‐band circularly polarized dielectric resonator antenna for wireless applications

This letter investigates an integrated antenna configuration for WLAN/WiMAX applications. The proposed composite antenna configuration is simply the grouping of ring dielectric resonator along with reformed square‐shaped slot antenna. Three significant characteristics of proposed article are: (1) aperture act as magnetic dipole and excite HE_11δ mode in ring dielectric resonator antenna; (2) reforming of square aperture generates orthogonal modes in ring DRA and creates CP in lower frequency band; (3) annular‐shaped Microstrip line along with reformed square aperture creates CP wave in upper frequency band. With the purpose of certifying the simulated outcomes, prototype of proposed structure is fabricated and tested. Good settlement is to be got between experimental and software generated outcome. Experimental outcomes show that the proposed radiating structure is operating over 2 frequency bands that is, 2.88‐3.72 and 5.4‐5.95 GHz. Measured 3‐dB axial ratio bandwidth in lower and upper frequency band is approximately 9.52% (3.0‐3.4 GHz) and 5.85% (5.64‐5.98 GHz), respectively. These outcomes indicate that the proposed composite antenna structure is appropriate for WLAN and WiMAX applications.     

Tri‐band composite cylindrical dielectric resonator antenna with hybrid mode excitation and cross‐polarization suppression

This communication investigates composite cylindrical dielectric resonator antenna (CDRA) for various wireless applications. Three important features of proposed antenna design are (i) realization of two different hybrid modes, that is, HEM_11δ and HEM_12δ mode in CDRA with the help of modified annular ring printed line (work as both magnetic dipole and electric dipole), both the hybrid modes support broadside radiation characteristics (ii) suppression of HEM_21δ mode, in order to reduce the cross‐polarization level in H‐plane of other hybrid modes (HEM_11δ and HEM_12δ mode) by an amount of 8‐10 dB (iii) creation of triple‐band attribute using the concept of composite antenna. The proposed antenna design has been fabricated and practically tested. Simulated outcomes show good agreement with measured outcomes. It works in three frequency bands, that is, 2.25‐2.79 GHz, 3.1‐4.0 GHz, and 5.05‐5.6 GHz. The designed antenna structure is appropriate for WLAN and WiMAX applications.     

Hybrid cylindrical dielectric resonator antenna with HE11δ and HE12δ mode excitation for wireless applications

In this article, dual mode triple band hybrid cylindrical dielectric resonator antenna (CDRA) for different wireless applications is investigated. It is seen that annular ring shaped patch along with T‐shaped printed line behaves as a magnetic and electric dipole concurrently and create HE_11δ and HE_12δ mode in the proposed CDRA. Both of the hybrid modes radiate in broadside direction. The concept of hybrid antenna (the combination of annular ring patch and CDRA) is used to achieve triple‐band feature in the proposed antenna. Ansoft HFSS‐EM simulator is used to optimize the proposed antenna. Optimized simulated results have been practically confirmed by using the archetype of proposed antenna. The proposed radiator is applicable in three different frequency bands, that is, 2.24‐2.56 GHz, 3.28‐4.18 GHz, and 5.36‐5.8 GHz. It is appropriate for WLAN (2.4/5.8 GHz) and WiMAX (2.5/3.3/5.5 GHz) applications.     

Circularly polarized rectangular DRA coupled through orthogonal slot excited with microstrip circular ring feeding structure for Wi‐MAX applications

In this article, a wideband circularly polarized rectangular dielectric resonator antenna (RDRA) coupled through orthogonal slots and excited with a new microstrip circular ring has been investigated. Circular polarization has been achieved by using plus shaped (+) slot on the ground plane and excited through a new microstrip circular ring feed. TE_11δ mode has been excited in the RDRA which has been confirmed through the distribution of E ‐field and dielectric waveguide model (DWM) method of RDRA. Circularly polarized (CP) RDRA offering measured ?10 dB input impedance bandwidth of 20.79% (centered at 3.27 GHz) and 3 dB axial ratio bandwidth in broadside direction of 12.09% (centered at 3.39 GHz), respectively. From the CP radiation pattern, proposed design confirms that right ‐ handed CP (RHCP) in broadside direction. The difference between RHCP field and left ‐ handed CP (LHCP) field are above ?26 dB in operational band. In addition, the proposed CP antenna offers stable gain and radiation efficiency in working bands and it is suitable for IEEE 802.16e/d Wi‐MAX (3.3‐3.7 GHz) band.     

Compact dual‐band ring dielectric resonator antenna with moon‐shaped defected ground structure for WiMAX/WLAN applications

In this article, compact ring‐shaped dielectric resonator antenna (DRA) along with moon‐shaped defected ground structure (DGS) was studied. The proposed antenna was fed by microstrip line shifted from center position, which excited TE_01δ mode in ring DRA. Moon‐shaped DGS was acting as a radiator and also reduced the size of proposed antenna by an amount of 14.87% (lower frequency band) and 48.77% (upper frequency band). The proposed antenna was designed to resonate at two different frequencies namely 2.24 and 5.82 GHz with a fractional bandwidth of 30.17% and 22.14%, respectively. Based on optimized design parameters, archetype of antenna structure has been constructed and measured successfully, which shows good agreement with simulated ones. The proposed antenna design was suitable for WLAN (2.4/5.2/5.8 GHz); WiMAX (2.5/5.5 GHz); AMSAT (5.6/5.8 GHz); and WAVE (5.9 GHz) bands. © 2016 Wiley Periodicals, Inc. Int J RF and Microwave CAE 26:503–511, 2016.     

A compact filtering antenna using dielectric strip resonator and parallel microstrip feed line

A filtering antenna using dielectric strip resonator and parallel microstrip feed line is proposed to achieve compact dielectric size and filtering response without gain reduction. The compact dielectric size is contributed by the dielectric strip resonator with high permittivity operated in the TM_δ1 cavity mode, whose electric field distribution along the short side is far less than half‐wavelength distribution. Therefore, the size of the proposed dielectric strip resonator is smaller than the traditional dielectric patch resonator operated in the TM₁₁ cavity mode. Additionally, the parallel placed microstrip line not only can excite the dielectric strip resonator for filtering response without gain reduction, but also can provide one upper‐edge radiation null for frequency selectivity enhancement. Compared with the reported filtering dielectric antennas, the proposed design exhibits the features of compact dielectric size, simple structure and wide stopband. For demonstration, one prototype operating at 4.9 GHz is fabricated, achieves the dielectric size of 0.00078 λ3 0 (λ₀ is the wavelength in the free space at the center frequency), the measured peak gain of 7.1 dBi, the 10‐dB impedance matching bandwidth of 4%, the stopband (> 16 dB) up to 1.84 f₀, and the cross‐polarization level of 20 dB within 3‐dB beam range.     

Dual‐band dual‐polarized hybrid aperture‐cylindrical dielectric resonator antenna for wireless applications

A dual‐band dual‐polarized hybrid aperture‐cylindrical dielectric resonator antenna (CDRA) is examined in this article. Inverted regular pentagon shaped aperture is not only used to launch two radiating hybrid modes (HEM_11δ and HEM_12δ mode) in CDRA but also act as a radiator. Out of two frequency bands, the lower frequency band is linearly polarized while upper frequency band is the combination of both circular and linear polarization. A circular polarization (CP) characteristic in upper frequency band is created by loading quarter annular stub with microstrip line. LHCP/RHCP can easily be controlled by alternating the position of quarter annular stub. It is operating over two frequency ranges i.e. 2.48‐2.98 GHz and 4.66‐5.88 GHz with the fractional bandwidth 18.31% and 23.14% respectively. Axial ratio bandwidth (3‐dB) is approximately 8.78% (4.9‐5.35 GHz) in upper frequency band. The proposed antenna design is suitable WiMAX (2.5/5.5 GHz) and WLAN (2.5/5.5 GHz) applications.     

Dielectric resonator based two‐port dual band antenna for MIMO applications

This article investigates a dual band multiple input multiple output (MIMO) cylindrical dielectric resonator antenna (cDRA) for WLAN and WiMAX applications. It consists of two symmetrical orthogonally placed radiators. Each radiator is excited through a narrow rectangular aperture with the help of a microstrip line. For higher mode excitation, the proposed structure uses dual segment DRA which apparently looks like stacked geometry. The aperture fed dielectric resonator works as a feed for upper cDRA to generate higher order mode. The presented radiator covers the band between 3.3‐3.8 GHz and 5‐5.7 GHz. The measured isolation is better than 20 dB in the desired band. The average gain and radiation efficiency achieved for the proposed antenna is 6.0 dBi and 85%, respectively at the operating frequency band. In the proposed geometry, broadside radiation patterns are achieved by exciting HEM_11δ and HEM_12δ modes in a stacked geometry. Different MIMO performance parameters (ECC, DG, MEG, and CCL) are also estimated and analyzed. The prototype of proposed antenna is fabricated and tested. The measured outcomes are in good accord with the simulated one.     

Broadband conical beam antenna in planar environment

In this article, a substrate‐truncated microstrip circular patch antenna with shorting vias is proposed for X‐band applications. The bandwidth of the designed antenna is substantially increased by making two slots—one circular and another annular ring—at the top of the structure which actually helps in bringing two individual resonating frequencies closer to each other. The antenna is simulated using the Ansoft HFSS, and various parameters are optimized for better performance. The deigned structure is finally fabricated and tested, and the measured data fairly agree with the simulated results. The measured relative impedance bandwidth (|S₁₁| < ?10 dB) is found to be 28.5% (8.9‐11.85 GHz). The proposed antenna is behaving like a monopole with the radiated beam of conical shaped in the entire operating band having a maximum gain of 7.2 dBi.     

Stacked rectangular dielectric resonator antenna with different volumes for wideband circular polarization coupled with step‐shaped conformal strip

This paper presents a wideband circularly polarized broadside radiation characteristics by using stacked rectangular dielectric resonator antenna (DRA) with different volumes. In this designed antenna, the wide input impedance‐ and axial ratio (AR)‐bandwidths come from three factors: stacked rectangular DR with different volumes, stepped‐shaped conformal strip associated with microstrip line as a feed and different type of partial ground plane. Here, the orthogonal TE^x_δ11 and TE^y_1δ1 modes have been responsible for the generation of CP radiation in stacked rectangular DRA. Measured results show that the proposed stacked rectangular DRA with different volumes achieves input impedance bandwidth of 54.84% while AR bandwidth has been found to be 11.53%. The proposed antenna provides broadside right‐handed CP radiation pattern with gain ranges from 2.27–5.80 dBic and offers an average radiation efficiency of 89.48%, across the entire working bandwidth, respectively. Therefore, this antenna is very much useful for the ISM 2400 band applications.     

A new modified CPW‐fed wideband circularly polarized half‐split cylindrical dielectric resonator antenna with different permittivity of two layers in radial direction

In this article, a wideband circularly polarized half‐split cylindrical dielectric resonator antenna (HS‐CDRA) having two layers with different permittivity in radial direction is investigated. Designed antenna is excited by a new modified CPW fed which consists of signal line, helps to realization of circular polarization, half‐split cylindrical dielectric resonator (HS‐CDR), to confirm that circular polarization in proposed antenna. HS‐CDR is made of two different materials which can supports to enhance the input impedance bandwidth and 3‐dB axial ratio bandwidth. From the distributions of E‐fields in HS‐CDRA, it is observed that TM_11δ mode has been excited. To confirmed the circular polarization in proposed antenna, E‐field distribution on different phases (φ = 0º, 90º, 180º, and 270º) have been plotted. This antenna provides measured ?10 dB input impedance bandwidth of 25.94% (centered on 4.70 GHz) and 3‐dB axial ratio bandwidth in broadside direction of 17.34% (centered on 4.90 GHz). The average gain and radiation efficiency in working band are 1.56 dBi and 93.43% in broadside direction, respectively. CP radiation pattern shows that the proposed antenna has left hand circular polarization and this developed antenna could be useful for wireless applications like WLAN/Wi‐MAX bands.     

A new dual C‐shaped rectangular dielectric resonator based antenna for wideband circularly polarized radiation

This article presents a new dual C‐shaped rectangular dielectric resonator (DR) based antenna for generation of wideband circularly polarized (CP) radiation. The proposed antenna comprises of a pair of C‐shaped rectangular dielectric DR and a metal strip with a coaxial probe. By utilization of a metal strip at the side surface of C‐shaped rectangular DR, the wideband CP radiation is achieved from the proposed dielectric resonator antenna (DRA). Fundamental orthogonal modes (TE^x_δ11 and TE^y_1δ1) are excited using the rectangular DRA with a metal strip for the generation of CP fields. The proposed antenna with dual C‐shaped rectangular CP DRA provides the measured ?10 dB reflection coefficient bandwidth of 30.07% (3.22 GHz‐4.36 GHz) with measured 3‐dB axial ratio bandwidth of 14.81% (3.25 GHz‐3.77 GHz) at the boresight. The proposed antenna covers the useful Wi‐MAX band.     

Ferrite ring loaded hybrid substrate design for gain enhancement of linearly and circularly polarized microstrip antennas

New design of compact high gain microstrip antennas (MSAs) by loading ferrite ring in the substrate has been proposed in this article. Gain enhancement in two compact wideband MSAs, one exhibiting linear polarization and the other featuring circular polarization, is demonstrated using hybrid substrate. The proposed hybrid substrate is a combination of Roger's 6002 (ε_r = 2.94, tan δ = 0.0012) and Ferrite ring having ε_r = 10, μ_r = 14, dielectric loss tangent tan δ_e = 0.0017 and magnetic loss tangent tan δ_m = 0.0391. This ferrite ring loaded composite antenna results in a peak gain enhancement of about 4.46 dBi in a linearly polarized E‐shaped MSA having bandwidth of 17.9%. In a similar fashion, a peak gain enhancement of about 3.61 dBi is exhibited on a standard dual‐fed circularly polarized square MSA (S‐MSA). Both E‐shaped MSA and S‐MSAs are fabricated and characterized for impedance and radiation pattern measurements exhibiting good corroboration with the simulated results.     

A multi‐mode wideband omnidirectional monopolar patch antenna for indoor wireless communication systems

A wideband omnidirectional monopolar patch antenna merged multi‐mode with a simple structure is proposed in this article. The antenna consists of a circular patch and a concentric annular ring, which is coupled‐fed by a T‐shape monopole at its center. A wideband performance is achieved by converging multi‐mode: TM₀₂ mode of the circular patch, TM₀₂ mode of the annular ring and monopole mode of the T‐shape monopole. The measured results show that the proposed antenna has an impedance bandwidth of 55.3% from 4.45GHz to 7.85GHz. All of the three resonant modes lead to conical radiation patterns in the elevation plane and omnidirectional radiation patterns in the azimuth plane, and the measured peak gain varies from 6.1 to 10 dBi within the operating band, which verifies it can be a good choice for indoor wireless communication systems.     

Electrically coupled dual semicylindrical dielectric resonator antenna with inverted arrangement for wideband applications

In this article, an electrically coupled dual semicylindrical dielectric resonator antenna (SC‐DRA) is presented and discussed for wideband applications. The two SC‐DRAs are placed in an inverted arrangement and fed by a coaxial probe to excite the fundamental mode TM _11δ and higher order mode TM _21δ. In the proposed design, wideband performance is obtained by combining the fundamental and higher order mode. Proposed wideband antenna is showing simulated and measured input impedance bandwidth (|S₁₁| ≤ ?10 dB) of 57.94% (3.8‐6.9 GHz) and 64.4% (3.38‐6.6 GHz), respectively. The far field radiation patterns are found to be consistent and 3‐dB beamwidth of 49° and 30° has been achieved at 4.11 and 6.48 GHz, respectively within the working band. This design attains an average gain of 5.65 dBi and radiation efficiency of 97%, respectively.     

Design approach for dual element hybrid MIMO antenna arrangement for wideband applications

This communication explains the designing of two‐port based hybrid radiator for multiple‐input‐multiple‐output (MIMO) applications. Hybrid radiator includes U‐shaped printed line and ring dielectric resonator antenna (ri‐DRA). Wideband characteristics have been achieved by exciting both the U‐shaped printed line along with ri‐DRA. The U‐shaped metallic line acts as a magnetic dipole and helps to excite fundamental hybrid mode (HE_11δ) in the ri‐DRA. Dual L‐shaped and a rectangular defect have been created in ground plane for achieving wideband isolation over the working frequency band. Optimized Scattering parameters and far‐field results are verified by fabricating and testing of antenna prototype. Experimental outcomes confirm that the proposed MIMO antenna gives wider impedance bandwidth (80%), improved port isolation (better than 18 dB), stable gain (~ 4 dB), and radiation pattern. Various MIMO performance factors are analyzed and instituted in the tolerable boundaries.     

A new dual‐mode wideband circularly polarized rectangular dielectric resonator antenna coupled with stubs and asymmetric ground plane for WiMAX applications

In this article, a new radiating stub microstrip feed has been investigated with asymmetrical ground plane for generation of circular polarization (CP) in a dielectric resonator antenna (DRA). Here, asymmetrical ground plane and 3 radiating stubs with microstrip feed line are used for generation of 2 different modes namely TE_11δ and TE_12δ in rectangular DRA. By using mode matching concepts, these modes are responsible for enhancing the impedance bandwidth (TE_12δ ie, and ) and axial ratio (AR) bandwidth (TE_11δ ie, and ) in proposed antenna. Designed antenna offers measured input impedance bandwidth (|S₁₁| < ?10 dB) and AR bandwidth (AR < 3‐dB) of 44.78%, ranging from 4.6 to 6.9 GHz and 23.32%, ranging from 4.6 to 6.9 GHz, respectively. It has been observed that proposed antenna shows left‐handed CP fields in boresight direction with average gain of 3.15 dBic and radiation efficiency of 90.54%. Designed antenna is suitable for Wi‐MAX (3.3‐3.7 GHz) applications.     

A dual‐band circularly polarized antenna with aid of dual cylindrical dielectric resonator blocks

In this communication, a dielectric resonator based circularly polarized antenna is designed and investigated. A modified aperture is used to excite dual cylindrical dielectric resonator (CDR) blocks. Two important characteristics of the proposed radiator that makes it all the more attractive are as follows: (i) excitation of dual radiating modes that is, HEM_11δ and TE_01δ mode in cylindrical DR along with the support of dual‐band circularly polarized (CP) waves; (ii) arrangements of dual CDR blocks to reduce the Q‐factor which is useful to enhance the impedance bandwidth of both frequency bands. Fabrication as well as experimental measurement of the antenna prototype has been done for verifying simulation outcomes. This antenna design operates over dual frequency bands, that is, 5.01‐6.41 GHz and 7.3‐7.9 GHz with the fractional bandwidth of 24.73% and 9.39%, respectively. It supports CP waves over the frequency range 6.1‐6.5 GHz and 7.4‐7.8 GHz. The proposed antenna backs right‐hand circularly polarized (RHCP) radiation with an average gain of 4.5 dBi. These characteristics make it well fitted for WLAN, WiMAX (5.2/5.5/5.8 GHz), and downlink defense purpose satellite communication (7.2‐7.7 GHz).     

A hybrid dual‐mode dielectric resonator antenna with wide beamwidth

A wide beamwidth rectangular dielectric resonator antenna (RDRA) working on dual modes is proposed in this letter. The radiator of the antenna with inside metallic posts and outside metallic walls is placed on a groundplane with a size of 2λ_g × 2λ_g. A TE′_δ21TE′_δ21 mode, which is similar to TE_δ21 mode, is generated by using the metallic posts inside the DR. By adjusting the height of metallic posts and the distance between the DRA and the metallic walls, the TE′_δ21 mode, and the TE_δ11 mode are superimposed with each other, widening the beamwidth of the RDRA to above 140° in both the E‐plane and H‐plane. This antenna works from 8.1 to 8.7 GHz with a relative bandwidth of 7.1%, which can be a good candidate in navigational systems.