Interfacial spring model for ultrasonic interactions with imperfect interfaces: Theory of oblique incidence and application to diffusion-bonded butt joints

The quasi-static distributed spring model is used to derive the ultrasonic reflectivity of an imperfectly-bonded interface as a function of frequency and angle of incidence. The results are then incorporated in a model for the corner reflection from a diffusion-bonded joint between two abutting plates, the corner being defined by the bond plane and the common lower surface plane of the plates. An immersion-inspection geometry is assumed, and seven categories of corner reflections are identified and examined in detail. These fall into two classes: those having parallel incident and exiting rays in water (=), and those having nonparallel water rays ( ). The = categories are suitable for single probe (pulse-echo) inspections of the joint. Based on the amplitude of the outgoing corner-reflected signal, two = geometries appear promising. These employ, respectively, a corner reflection involving only longitudinal waves with the interface illuminated at near-grazing incidence (LLL), and a corner reflection involving only transverse waves with the interface illuminated at near 45° incidence (TTT). In addition, two practical geometries are indicated; these both involve mode conversion upon reflection from the interface, with the incident or outgoing longitudinal wave traveling nearly parallel to the interface. Model predictions for LLL and TTT reflections are compared to measurements on diffusion-bonded Inconel specimens, and techniques for applying the model results to more complicated bond geometries are discussed.     

A new iterative technique of the finite element method for the analysis of the steady state incompressible viscous flow based on the transformation of variables

In this paper the convergence acceleration for solving steady-state incompressible flows, by using iterative solvers, is explored. The variable transformation: u = u – , p = –r, where u and are the rotational velocity and the velocity potential, respectively, is applied to the finite element discretized equations so as to get diagonal-dominant equations. The effectivity of the present techniques is demonstrated on the 2D lid-driven flow and the 3D flow in a disk-cylinder system.     

Effect of Intense Self-Irradiation on the Phase Composition of Metallic Plutonium

The crystal structure of film samples of "high-level" (based on ²³⁸Pu) and low-level (based on ²³⁹Pu) metallic plutonium during their prolonged (up to 343 days) storage (self-irradiation) at room temperature was studied by X-ray diffraction. In the samples of high-level plutonium, the -Pu and -Pu lattices coexist. In the period of 40-60 days, the other known crystal modifications of plutonium (-Pu, -Pu, -Pu, and -Pu) are also present. Low-level plutonium had only the -Pu lattice. A possible origin of this phenomenon is discussed.     

Kondo Impurity in a Mesoscopic Ring: Charge Persistent Current

We study the influence of a magnetic impurity or ultrasmallquantum dot on the charge persistent current of a mesoscopicring. The system consists of electrons in a one-dimensionalring threaded by spin-dependent Aharonov–Bohm/Casher fluxes,coupled via an antiferromagnetic exchange interaction to alocalized electron. By passing to a basis of electron stateswith definite parities, the problem is mapped onto a Kondomodel for the even-parity channel plus free electrons in theodd-parity channel. The twisted boundary conditionsrepresenting the fluxes couple states of opposite parityunless the twist angles satisfy =f,where f are integers, with spin index=, . For these special values of, the model is solved exactly by a Bethe ansatz.Special cases are investigated in detail. In particular weshow that the charge stiffness in the case= is insensitive to the presenceof the magnetic impurity/quantum dot.     

Bounding-surface plasticity: Stress space versus strain space

Summary A bounding-surface plasticity model is formulated in stress space in a general enough manner to accommodate a considerable range of hardening mechanisms. Conditions are then established under which this formulation can be made equivalent to its strain-space analogue. Special cases of the hardening law are discussed next, followed by a new criterion to ensure nesting. Finally, correlations with experimental data are investigated.Notation (a) centre of the stress-space (strain-space) loading surface; i.e., backstress (backstrain) - ^* (a ^*) centre of the stress-space (strain-space) bounding surface - (a ) target toward which the centre of the stress-space (strain-space) loading surface moves under purely image-point hardening - (b) parameter to describe how close the loading surface is to nesting with the bounding surface in stress (strain) space; see (H10) - (c) elastic compliance (stiffness) tensor - (d) parameter to describe how close the stress (strain) lies to its image point on the bounding surface; see (H10) - (D) generalised plastic modulus (plastic compliance); see (1) - function expressing the dependence of the generalised plastic modulus on (plastic complianceD ond) - ^* (D ^*) analogue to (D) for the bounding surface - function expressing the dependence of ^* on (D ^* ond) - () strain (stress) - ' (') deviatoric strain (stress) - ^P ( ^R ) plastic strain (stress relaxation); see Fig. 1 - () image point on the bounding surface corresponding to the current strain (stress) - _iso (f _iso) at the point of invoking consistency, the fraction of local loading-surface motion arising from a change of radius; i.e., fraction of isotropic hardening in the stress-space theory - _kin (f _kin) at the point of invoking consistency, the fraction of local loading-surface motion arising from a change in the backstress (backstrain); i.e., fraction of kinematic hardening in the stress-space theory - _nor (f _nor) at the point of invoking consistency, the fraction of backstress (backstrain) motion directed toward the image stress (strain); i.e., the image-point fraction of the kinematic hardening in the stress-space theory - _ima (f _ima) at the point of invoking consistency, the fraction of backstress (backstrain) motion directed toward the image stress (strain); i.e., the image-point fraction of the kinematic hardening in the stress-space theory - function relating _iso to , , and (f _iso tob,d, andl) - function relating _kin to , , and (f _kin onb,d, andl) - function relating _nor to , , and (f _nor onb,d, andl) - function relating _ima to , , and (f _ima onb,d, andl) - the fraction of outwardly normal bounding-surface motion at the Mróz image point which arises from a change of radius - the fraction of outwardly normal bounding-surface motion at the Mróz image point which arises from a change in the centre - function relating _iso ^* to (f _iso ^* tod) - function relating _kin ^* to (f _kin ^* tod) - (l) parameter to describe the full extent of plastic loading up to the present, giving the arc length of plastic strain (stress relaxation) trajectory; see (H10) - function relating the direction for image-point translation of the loading surface to various other tensorial directions associated with the current state; see (H5). With 6 Figures     

Universality and the scaling laws in the superfluid phase transition of3He-4He mixtures

From the second-sound velocityU ₂ near the superfluid transition point, the superfluid densities in³He-⁴He mixtures, _s (X) and _s (), were deduced along the paths of constant³He concentrationX and of constant chemical potential difference of³He and⁴He. The following critical exponents of _s are determined: (a) =XX for _s (X) in the(X, T) plane,(b) X for _s (X) in the(, T) plane, and(c) for _s () in the(, T) plane. It is found that and _X change by about 4–6% relative to with increasing³He concentration up toX=0.4 and by 8–10% up toX=0.53. It seems that, belowX=0.53, universality hold for . Values of have been found to be in good agreement with the critical exponent of _s in pure⁴He under constant pressure. The values of and _X forX0.53 are also found to be consistent with the scaling relations in the (,T) plane of³He-⁴He mixture.Work performed in part while at the Electrotechnical Laboratory.     

Heat transfer of a semitransparent plate under conditions of a regular regime of the second kind

The kinetics of the cooling of a plane semitransparent layer under conditions of a regular regime of the second kind is analyzed.Notation time - T temperature - T_e temperature of the surrounding medium (the ambient temperature) - T° initial temperature of the layer - h_e coefficient of convective heat exchange - x coordinate - coefficient of absorption of the substance - n index of refraction - B(, T) surface density of radiation of a black body - C bulk specific heat - K thermal conductivity - wavelength of the radiation - _t range of wavelengths in which the material is partially transparent - _op range of wavelengths in which the material is opaque - degree of blackness of the surfaces in the range of _op - R() coefficient of reflection from the inner surfaces of the layer - ⁺ intensity of the rays consisting of acute angles with the inner normal to the surface x = 0 - ^– intensity of rays in the opposite direction - q thermal flux - angle measured from the inner normal to the surface x = 0 Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 41, No. 3, pp. 541–546, September, 1981.     

Thermal diffusivity of inhomogeneous systems

The possibility of analyzing the nonsteady temperature fields of inhomogeneous systems using the quasi-homogeneous-body model is investigated.Notation t, t_I, t_i temperature of quasi-homogeneous body inhomogeneous system, and i-th component of system - a, , c thermal diffusivity and conductivity and volume specific heat of quasi-homogeneous body - a_{i i}, c_i same quantities for the i-th component - q heat flux - S, V system surface and volume - x, y coordinates - macrodimension of system - dimensionless temperature Fo=a/² - Bi=/ Fourier and Biot numbers - N number of plates - =h/ ratio of micro- and macrodimensions - _V, volumeaveraged and mean-square error of dimensionless-temperature determination - time - m_i i-th component concentration Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 39, No. 1, pp. 126–133, July, 1980.     

The neural net of neural network research

In this paper we discuss the limits and potentials of bibliometric mapping based on a specific co-word analysis. The subject area is neural network research. Our approach is a simulation of expert assessment by offering the reader a narrative of the field which can be used as background information when reading the bibliometric maps. The central issue in the applicability of bibliometric maps is whether these maps may supply additional intelligence to users. In other words, whether such a bibliometric tool has an epistemological value, in the sense that it ecriches existing knowledge by supplying unexpected relations between specific pieces of knowledge (synthetic value) or by supplying unexpected problems (creative value). We argue that sophisticated bibliometric mapping techniques are indeed valuable for open new avenues to study science as a self-organizing system in the form of a neural network like structure of which the bibliometric map is a first-order aproximation. In that sense, this paper deals with the neural net of neural network research as our bibliometric techniques in fact mimic a connectionistic approach.     

Determination of the local angular radiation coefficients in certain two-body systems

A method is shown and formulas are derived by which local angular radiation coefficients can be determined in certain two-body systems where the configuration is arbitrary but one of the bodies is either a cylinder or a rectangular plate.Notation _int radiation vector of body 1 - _E ^int intrinsic radiation intensity of body 1 - _x, _y, _z components of the geometrical radiation vector along rectangular coordinates - r₀=x²+z² shortest distance from point M(x, y, z) to linear radiator - ₀ , ₀ ^' angles subtending the two segments of the linear radiator from point M(x, y, z) on area element 2 of irradiated surface - l length of the cylinders - x, y, z space coordinates of point M Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 22, No. 6, pp. 1080–1088, June, 1972.     

Computation of particle settling speed and orientation distribution in suspensions of prolate spheroids

A numerical technique for the dynamical simulation of three-dimensional rigid particles in a Newtonian fluid is presented. The key idea is to satisfy the no-slip boundary condition on the particle surface by a localized force-density distribution in an otherwise force-free suspending fluid. The technique is used to model the sedimentation of prolate spheroids of aspect ratio b/a=5 at Reynolds number 03. For a periodic lattice of single spheroids, the ideas of Hasimoto are extended to obtain an estimate for the finite-size correction to the sedimentation velocity. For a system of several spheroids in periodic arrangement, a maximum of the settling speed is found at the effective volume fraction (b/a)²04, where is the solid-volume fraction. The occurence of a maximum of the settling speed is partially explained by the competition of two effects: (i) a change in the orientation distribution of the prolate spheroids whose major axes shift from a mostly horizontal orientation (corresponding to small sedimentation speeds) at small to a more uniform orientation at larger , and (ii) a monotonic decrease of the the settling speed with increasing solid-volume fraction similar to that predicted by the Richardson–Zaki law (1–)⁵⁵ for suspensions of spheres.     

On the analysis of tunneling data for A15 superconductors

We examine the applicability of the standard McMillan inversion of Eliashberg's equations for superconductors with a nonconstant electronic density of statesN(). We do this usign simple models forN() and a realistically shapedN() taken from recent band structure work for Nb₃Sn. It turns out that peak structure inN() near _F may lead to gross errors in the derived Eliashberg function ²F() when the energy dependence ofN() is omitted in the inversion procedure. For Nb₃Sn, this leads to a 40% overestimate of when ²F() is evaluated via the standard McMillan program.     

Rubber toughening of plastics

Creep measurements were made on a series of six ABS blends containing 0 to 20 vol% of 80m glass beads. At small strains, the beads raised the modulus of the ABS. However, debonding of the polymer from the glass resulted in a rapid drop in modulus with increasing strain and bead content, and at strains above 1.0% the order of stiffnesses was reversed. Debonding resulted in an increase in creep rate with, as measured by the time to reach 1% volume strain. Plots of In ^–1 against applied stress were linear, in accordance with the Eyring equation, and provided data for comparing stress concentration factors. The relationship between and fitted approximately to the Ishai Cohen effective area model. It is concluded that debonded glass beads accelerate multiple crazing by increasing average stresses in the ABS matrix, and in that respect resemble rubber particles. However, unlike rubber particles, debonded beads drastically reduce notched Charpy impact strength.     

Study of Broadband Long-Focus Optics for Synchrotron Infrared Diagnosis of Low-Energy Electron Beams

A special optical device for measuring the geometry and current parameters in electron rings by synchrotron infrared radiation is designed, fabricated, and studied. The optical elements of the device are made of an optical ceramic and operate at 1–8 m. The study results are presented.     

Comparison of energy and phase relaxation in metallic wires

We have determined the phase coherence time, , frommagnetoresistance measurements of long, narrow wires ofAu, Ag, and Cu, over the temperature range40 mK-6 K. In the Cu and Au wires, saturates at low temperature. In the Ag wire, continues to increase down to the lowesttemperatures measured; moreover, its temperature dependencebelow about 1 K is consistent with theoreticalpredictions of Altshuler, Aronov and Khmelnitskii published in1982. These results cast doubt on recent assertions thatsaturation of at low temperature is a universalphenomenon in metal wires. We compare these results with thoseof recent experiments on energy relaxation in similar metallicwires. The results of the two experiments are stronglycorrelated, suggesting that a single (unknown) mechanism isthe cause of the enhanced phase and energy relaxation observedin some samples.     

Application of coherent-optical methods in physical studies of evaporation

The application of the methods of laser and holographic interferometry to the problems of measuring evaporation rates is examined. Mass transfer accompanying evaporation in the region of extradiffusion monitoring is studied.Notation j_v specific mass flux of the vapor, kg/(m²·sec) - _c coefficient of condensation - _v coefficient of evaporation - D coefficient of diffusion - m²/sec, wetting angle - R radius of the vessel, m - time, sec - h height of the segment, m - wavelength of the laser radiation, m - N order of the interference fringe or the number of fringes passing through a given point - density of the matter, kg/m³ - length of the cell with the liquid of interest, m - T temperature, K - n refractive index of the medium - m mass - kg, V volume of the spheroidal segment, m³ - _liq and _g molar mass, kg/mole - C₀ and C_p concentration of vapor in the gas, kg/m³ - a and b semiaxes of the spheroid, m - _e ellipsoidal coordinate of a point on the surface, m² - c/n derivative along the normal - r coordinate of a point on the surface of evaporation, m - n change in the refractive index of the medium Indices st standard liquid - liq liquid - g gas - 0 starting state - p equilibrium pressure Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 55, No. 4, pp. 605–611, October, 1988.     

A new application of the reciprocity relations to the study of fluid flows through fixed beds

Creeping flow through an array of spheres with small volume fraction is studied theoretically. It is observed that it can be described macroscopically by Brinkman's equation. A generalized version of the reciprocity relations is used to determine the viscous term up to O(²) for the case of random configuration and up to O(³) for the case of periodic, cubic configurations of the fixed bed.     

The mechanism of continuous dissolution of the lamellar structure in aged Al 22 at% Zn alloy

The mechanism of continuous dissolution was studied using transmission electron microscopy, X-ray diffraction and hardness measurements. The metastable phase was identified in the first stage of dissolution nucleating at the - boundaries. Interface dislocations at the - boundaries forming a perpendicular net in the 110 directions were identified as of screw character and of Burgers vector b=1/2a 110. During dissolution a change of shape of precipitates occurs leading to their fragmentation and to a change of the direction of boundaries into 110 directions.     

A note on the similarity solutions for free convection on a vertical plate

Summary The similarity solutions for free convection on a vertical plate when the (non-dimensional) plate temperature is x and when the (non-dimensional) surface heat flux is –x are considered. Solutions valid for 1 and 1 are obtained. Further, for the first problem it is shown that there is a value ₀, dependent on the Prandtl number, such that solutions of the similarity equations are possible only for >₀, and for the second problem that solutions are possible only for >–1 (for all Prandtl numbers). In both cases the solutions becomes singular as ₀ and as –1, and the natures of these singularities are discussed.     

Correlations and effective potential in the ground state of a one-dimensional model for solid helium and deuterium

The ground-state energyE can be calculated exactly by the transfer-integral method if the total wave function is assumed to be a product of single-particle functions and nearest-neighbor correlation functionsf. The variation ofE with respect tof for fixed leads to a Schrödinger equation for the relative motion of two particles which is coupled to the transfer integral equation by an effective potential V. For the case of a Gaussian the optimalf, the one- and two-particle probability amplitudes, and other quantities are computed by iteration of the Schrödinger equation with the transfer integral equation until self-consistency is achieved. The minimum ofE as a function of the Gaussian width is obtained for different values of the lattice parameter. The shape of V andf is discussed. The self-consistentf describes both short- and long-range correlations.