界面聚合技术制备分离膜的研究进展

界面聚合技术具有许多优良性能,如反应条件温和、可控性强、可以实现自封闭和自终止等,被广泛应用于分离膜制备中。本文阐述了界面聚合技术的原理,详细介绍了界面聚合在膜分离中的应用情况,包括纳滤膜、反渗透膜和气体分离膜,并综述了界面聚合技术在微胶囊、导电聚合物、纤维材料等方面的应用现状。最后,对界面聚合技术制备分离膜的研究前景进行了展望。     

含有MCM-41分子筛的混合基质复合膜用于CO2分离

为了提高CO₂分离膜的性能,将接枝了氨基的MCM-41分子筛(MCM-NH₂)添加到聚乙烯基胺(PVAm)水溶液中配制涂膜液,并将PVAm-MCM-NH₂涂膜液涂覆到聚砜(PSf)超滤膜上制备PVAm-MCM-NH₂/PSf混合基质复合膜。复合膜分离层较薄,有利于CO₂渗透速率的提高。接枝的胺基提高了分子筛与聚合物的相容性和膜内胺基含量,有利于膜渗透选择性能的提高。使用CO₂/N₂混合气(15% CO₂ + 85% N₂,体积分数)考察了不同MCM-NH₂添加量的PVAm-MCM-NH₂/PSf膜的渗透选择性能。当涂膜液中m_MCM-NH2/m_PVAm为0.2、湿涂层厚度为50 μm,测试温度为22℃ 、进料气压力为0.11 MPa时,膜的CO₂渗透速率可达4.66×10^-7 mol·m^-2·s^-1·Pa^-1,CO₂/N₂分离因子可达150。较高的CO₂/N₂分离性能表明PVAm-MCM-NH₂/PSf膜在烟道气碳捕集领域具有良好的应用前景。此外,考察了湿涂层厚度、热处理、添加小分子胺等条件对膜渗透选择性能的影响。     

界面聚合表面改性法制备高效抗污染油水分离复合膜

引　言油污染作为一种常见的污染 ,对环境保护和生态平衡危害极大 .膜分离法则是对含油污水进行深度处理的可行而有效的方法[1] .在使用膜分离法理含油污水时 ,膜污染是影响分离过程的最主要问题 .提高膜表面的亲水性能有效缓解膜分离含油污水过程中的膜污染情况[2 ,3] .目前处     

界面聚合制备复合膜过程的数学模型

基于高分子物理化学、质量传递和相分离成膜理论,研究在复合膜制备过程中采用界面聚合反应成膜的机理,建立了非稳态条件下反应．扩散联合控制的数学模型;通过有针对性地简化,该模型可适用于反应控制和扩散控制。模型中无量纲参数有明确的物理意义,较好地反映了界面聚合反应成膜过程的机理。无量纲化处理使模型解析解形式更为简单、实用,模型与实验数据吻合良好,且优于现有模型。通过模拟计算,可得出单体(A组分)浓度、膜的厚度、膜厚增长率随时间的变化关系,并可考察聚合反应速率常数、单体(A组分)在复合层中的扩散系数、单体初始浓度等参数对成膜过程的影响．理论结果可用于指导界面聚合反应成膜实践。     

温室气体CO2的捕集和分离--分离技术面临的挑战与机遇

介绍了采用溶剂吸收、膜分离和变压吸附等方法捕集和分离温室气体CO2的最新进展,并对技术发展动向进行了讨论。     

制备聚酰胺复合膜中界面聚合反应添加剂研究进展

聚酰胺复合膜以其优良的稳定性及良好的分离选择性成为水处理和化工分离领域应用范围最广的分离材料之一。聚酰胺复合膜一般采用界面聚合法制备,由于界面聚合反应活性高、反应参数多,致使界面层结构难以控制,膜的渗透性或选择性不理想。因此,如何有效调控膜结构,实现膜的高渗透性或选择性是目前面临的重要挑战。近期诸多研究表明,在水相或有机相中引入添加剂可以改变油水界面张力进而调控单体界面扩散速率及界面分布,或通过改变反应机理影响聚合反应速率,最终实现对界面层结构和膜性能的调控。本文从添加剂种类、性质和调控作用等角度总结了近年来添加剂对复合膜结构及性能调控的研究进展,分析了现有研究存在的问题,并建议从微观层面探究界面过程的物理化学性质以及开发高时间分辨率原位表征方法等。     

界面聚合法制备用于脱氮提纯CH4的N2优先渗透ZIF-90/聚酰胺混合基质膜

作为一种高效的分离方法,膜法分离非常规天然气具有较理想的应用前景。相较CH₄优先渗透膜,N₂优先渗透膜优势在于分离N₂/CH₄混合气后CH₄处于高压侧,利于后续处理。以均苯三甲酰氯为油相单体,间苯二胺为水相单体,采用界面聚合法在聚砜基膜上制备致密超薄聚酰胺分离层,并通过向其中引入孔径可允许N₂分子通过而不允许CH₄分子通过的纳米颗粒ZIF-90,在膜内形成固定的N₂传递通道,成功制备了用于脱氮提纯CH₄的N₂优先渗透混合基质膜。膜渗透选择性能测试结果显示当混合基质膜中纳米颗粒掺杂量为0.30 g·L^-1时,2 bar（1 bar=0.1 MPa）进料压力下,N₂渗透速率达1.16×10^-9 mol·m^-2·s^-1·Pa^-1,N₂/CH₄分离因子达16.6,分离因子比未掺杂ZIF-90的聚酰胺膜提高46.5%,具有一定的处理非常规天然气脱氮提纯甲烷的应用潜力。     

撞击流式反应器内水合物法分离沼气中CO2研究

实验考察了撞击流式反应釜内水合物法分离沼气中CO₂的特性。选取纯水和十二烷基硫酸钠（SDS）两个不同的体系,考察了水合物生成过程中压力、温度、撞击强度的影响。实验结果表明在纯水体系和SDS体系下压力的升高均有利于水合物的快速生成,但并不利于沼气中的二氧化碳捕集;实验通过改变撞击流式反应器的撞击强度发现,当撞击强度为0.128时,CO₂分离因子(S.F.)在纯水和SDS两种体系下均达到最大,纯水体系下S.F.的最大值为138.9,SDS体系下S.F.的最大值为64.5;实验结果表明添加剂SDS可以促进水合物的生成,最适宜的浓度为600 mg/L,此时耗气量、CO₂水合率S.Fr.(CO₂)和CH₄水合率S.Fr.(CH₄)达到最大,但SDS对CH₄水合物生成过程的促进作用大于CO₂水合物,反而不利于CO₂的分离,降低CO₂的分离因子。     

界面聚合法制备用于脱氮提纯CH4的N2优先渗透ZIF-90/聚酰胺混合基质膜

作为一种高效的分离方法,膜法分离非常规天然气具有较理想的应用前景。相较CH₄优先渗透膜,N₂优先渗透膜优势在于分离N₂/CH₄混合气后CH₄处于高压侧,利于后续处理。以均苯三甲酰氯为油相单体,间苯二胺为水相单体,采用界面聚合法在聚砜基膜上制备致密超薄聚酰胺分离层,并通过向其中引入孔径可允许N₂分子通过而不允许CH₄分子通过的纳米颗粒ZIF-90,在膜内形成固定的N₂传递通道,成功制备了用于脱氮提纯CH₄的N₂优先渗透混合基质膜。膜渗透选择性能测试结果显示当混合基质膜中纳米颗粒掺杂量为0.30 g·L^-1时,2 bar（1 bar=0.1 MPa）进料压力下,N₂渗透速率达1.16×10^-9 mol·m^-2·s^-1·Pa^-1,N₂/CH₄分离因子达16.6,分离因子比未掺杂ZIF-90的聚酰胺膜提高46.5%,具有一定的处理非常规天然气脱氮提纯甲烷的应用潜力。     

膜技术用于CO2回收和捕集的研究进展

综述了近年来膜技术在CO2回收和捕集中的应用,分别介绍了高分子膜、无机膜、有机-无机杂化膜、促进传递膜、膜生物反应器用于回收和捕集CO2的研究现状和优缺点。针对目前膜技术用于回收和捕集CO2中的不足,提出了今后研究工作的发展方向。     

Pseudopeptide bioconjugate additives for CO2 separation membranes

1:1[α/α‐N^α‐Bn‐hydrazino] pseudopeptide?polymer bioconjugates were synthesized and investigated as additives in a reference gas separation membrane (Pebax®) for CO₂ capture. Pebax® is a polyether block amide thermoplastic elastomer provided by Arkema and is already well known for its good performance for CO₂ separations. First, dimer and tetramer pseudopeptides were synthesized and their terminal amine was modified into a ‘clickable’ alkyne group in view of coupling. Second, an α‐azido acrylic poly(ethylene glycol)‐based oligomer was obtained by single‐electron transfer living radical polymerization and the two partners were coupled using copper(I) catalyzed alkyne‐azide cycloaddition (CuAAC) ‘click’ chemistry. The pseudopeptides and their bioconjugates were then assessed as original additives in Pebax® membranes for CO₂/CH₄ and CO₂/N₂ separations. The permeation data were analyzed according to the solution‐diffusion model. Compared to pseudopeptides, the pseudopeptide?polymer bioconjugates enabled the membrane properties to be greatly improved with better permeability (×1.5) and a good constant selectivity for CO₂ capture. The best membrane properties were obtained with 3 eq. wt% of the tetramer‐based bioconjugate with a CO₂ permeability of 194 Barrer (+46% compared to that of Pebax®) and constant selectivity (αCO₂/N₂ = 44 and αCO₂/CH₄ = 13). © 2016 Society of Chemical Industry     

一步法制备含氨基化合物的非对称CO2分离膜

采用一步相分离法,制备以聚醚砜（PES）为主体材料,二乙醇胺（DEA）为添加剂和氨基载体的膜,用于CO₂分离。考察了PES浓度、DEA浓度、膜厚度对CO₂/N₂分离性能的影响,同时考察了膜性能的长时间稳定性。当涂膜液中DEA/PES的质量比为12/26、刮刀与无纺布的距离为300 μm、进料气压力为0.11 MPa（表压）时,膜的CO₂渗透速率可达274 GPU,CO₂/N₂分离因子可达50。测试温度低于40℃时,DEA/PES膜的CO₂渗透速率和CO₂/N₂分离因子保持稳定。另外,对CO₂/N₂分离性能较好的DEA/PES膜（质量比为12/27）进行CO₂/CH₄分离性能测试,在1 MPa（表压）下性能优于商品膜。上述结果表明,本文研制的DEA/PES膜制备步骤简单,易于规模化制备,性能较优,在CO₂分离领域具有良好的应用前景。     

有机多孔聚合物CO2捕集及分离性能的研究进展

有机多孔聚合物（porous organic polymers,POPs）是一类由有机构建单元连接而形成的新型多孔材料。由于其优异的物理化学稳定性以及CO₂吸附能力,近年来有关POPs在CO₂捕集和分离的研究成为一大研究热点。大量具有优异孔性质（比表面积和孔容）的POPs通过不同有机合成反应被成功地开发出来应用于CO₂吸附分离过程。本文介绍了POPs材料的CO₂捕集与分离性能的研究现状,总结了提高POPs材料CO₂分离性能的合成策略,重点分析了可以通过功能化增强吸附剂与二氧化碳分子之间的相互作用,来提高材料的CO₂分离能力的方法。     

Size effects of graphene oxide on mixed matrix membranes for CO2 separation

Graphene oxide (GO)‐polyether block amide (PEBA) mixed matrix membranes were fabricated and the effects of GO lateral size on membranes morphologies, microstructures, physicochemical properties, and gas separation performances were systematically investigated. By varying the GO lateral sizes (100–200 nm, 1–2 μm, and 5–10 μm), the polymer chains mobility, as well as the length of the gas channels could be effectively manipulated. Among the as‐prepared membranes, a GO‐PEBA mixed matrix membrane (GO‐M‐PEBA) containing 0.1 wt % medium‐lateral sized (1–2 μm) GO sheets showed the highest CO₂ permeation performance (CO₂ permeability of 110 Barrer and CO₂/N₂ mixed gas selectivity of 80), which transcends the Robeson upper bound. Also, this GO‐PEBA mixed matrix membrane exhibited high stability during long‐term operation testing. Optimized by GO lateral size, the developed GO‐PEBA mixed matrix membrane shows promising potential for industrial implementation of efficient CO₂ capture. © 2016 American Institute of Chemical Engineers AIChE J, 62: 2843–2852, 2016     

离子液体二氧化碳分离膜研究进展

离子液体支撑液膜在较大跨膜压差（0.25～0.3MPa）下的稳定性较差,具有较好稳定性的聚离子液体膜和离子液体-聚合物共混膜等逐渐被关注。本文综述了离子液体支撑液膜、聚离子液体膜、离子液体?聚合物共混膜等离子液体膜CO2分离性能、分离机理及稳定性的最新研究进展,介绍了无机颗粒-离子液体-聚合物共混膜的研究现状。指出离子液体膜的高CO2渗透通量与高稳定性之间的矛盾、共混膜结构调控难等问题是其工业化应用的主要障碍,提出开发新的膜材料、改进制膜工艺以减小膜厚、优化膜结构是提高膜的CO2渗透和分离性能,并保持膜稳定性的有效途径。无机颗粒-离子液体-聚合物共混膜兼有较高的CO2分离性能和较好稳定性,具有良好的应用前景,对其制备方法、结构、性能及CO2分离机理的研究将成为这一领域的热点。     

Covalent organic frameworks-incorporated thin film composite membranes prepared by interfacial polymerization for efficient CO2 separation

Thin film composite (TFC) membranes with nanofillers additives for CO₂ separation show promising applications in energy and environment-related fields. However, the poor compatibility between nanofillers and polymers in TFC membranes is the main problem. In this work, covalent organic frameworks (COFs, TpPa-1) with rich —NH— groups were incorporated into polyamide (PA) segment via in situ interfacial polymerization to prepare defect-free TFC membranes for CO₂/N₂ separation. The formed covalent bonds between TpPa-1 and PA strengthen the interaction between nanofillers and polymers, thereby enhancing compatibility. Besides, the incorporated COFs disturb the rigid structure of the PA layer, and provide fast CO₂ transfer channels. The incorporated COFs also increase the content of effective carriers, which enhances the CO₂ facilitated transport. Consequently, in CO₂/N₂ mixed gas separation test, the optimal TFC (TpPa_0.025-PIP-TMC/mPSf) membrane exhibits high CO₂ permeance of 854 GPU and high CO₂/N₂ selectivity of 148 at 0.15 MPa, CO₂ permeance of 456 GPU (gas permeation unit) and CO₂/N₂ selectivity of 92 at 0.5 MPa. In addition, the TpPa_0.025-PIP-TMC/mPSf membrane also achieves high permselectivty in CO₂/CH₄ mixed gas separation test. Finally, the optimal TFC membrane showes good stability in the simulated flue gas test, revealing the application potential for CO₂ capture from flue gas.     

Recent advances on mixed matrix membranes for CO2 separation

Recent advances on mixed matrix membrane for CO2 separation are reviewed in this paper. To improve CO2 separation performance of polymer membranes, mixedmatrixmembranes (MMMs) are developed. The concept of MMM is illustrated distinctly. Suitable polymer and inorganic or organic fillers for MMMs are summarized.Possible interface morphologies between polymer and filler, and the effect of interface morphologies on gas transport properties of MMMs are summarized. The methods to improve compatibility between polymer and filler are introduced. There are eightmethods including silane coupling, Grignard treatment, incorporation of additive,grafting, in situ polymerization, polydopamine coating, particle fusion approach and polymer functionalization. To achieve higher productivity for industrial application,mixed matrix composite membranes are developed. The recent development on hollow fiber and flat mixedmatrix composite membrane is reviewed in detail. Last, the future trend of MMM is forecasted.     

Network polyimide membranes prepared by interfacial polymerization for hot H2 purification

Novel polymeric membranes are to be developed for hot H₂/CO₂ separation. In this work, network polyimide (PI) membranes are prepared via a simple interfacial polymerization method using low-cost melamine and pyromellitic dianhydride monomers. The membrane performance surpasses the upper bound of H₂/CO₂ separation. Moreover, the membranes exhibit a H₂/CO₂ separation factor of 18.7 at 623 K and a robust performance after treatment with steam and H₂S.