LiNbO3光波导紫外表面等离子共振传感器模拟计算

高折射率的LiNbO3光波导,构成四层高折射率波导表面等离子共振传感器.采用传输矩阵方法得基模TM模色散表达式,研究了光波导有效折射与样品折射率之间的关系、光波导传输常数和波长的关系,由表面等离子体波共振耦合条件,得到不同样品折射率的表面等离子共振波长.利用菲涅耳的反射率公式,计算了四层结构波导传感器的透射谱,得到表面...     

基于表面等离子体共振传感器的尿微量白蛋白检测

检测尿微量白蛋白(MAU)可对轻微肾脏损害进行早期诊断,也可对高血压患者可能发生的心脑血管事件进行预测。实验将抗体通过巯基自组装固定于Au膜表面,研制了一种快速检测MAU的表面等离子体共振(SPR)生物传感器。结果表明:直接检测法可以检测到0.3μg/L的MAU,而纳米Au放大法检测限可以低至0.03μg/L。     

表面等离子体共振传感器的仿真

为了得到基于相位检测、角度检测和波长检测的表面等离子体共振(SPR)生物传感器的高检测精度,利用Matlab建立了Kretschmann模型SPR传感器的数值仿真软件.系统地进行了棱镜折射率、测试介质折射率、金膜的厚度等因素对3种不同检测方式的SPR曲线的影响.理论分析结果表明:角度调制时与介质折射率增加时,SPR角也相应增加,相位检测对传感层的折射率具有选择性.     

A microfluidic based differential plasmon resonance sensor

A new type of differential surface plasmon (SPR) sensor integrated with a microfluidic system is presented. The working principle of the microfluidic device is based on hydrodynamic modulation of two laminar streams inside a microchannel to provide periodic changes of the environment on the SPR sensor. The modulated reflectance is then demodulated using a lock-in amplifier. The presented sensor provides sensitivities of index of refraction about 4 × 10⁻⁸ RIU together with a 4 orders of magnitude dynamic range. This method demonstrates a sensitive detection scheme which could be used for label-free detection.     

Highly accurate and sensitive surface plasmon resonance sensor based on channel photonic crystal waveguides

A highly sensitive surface plasmon resonance (SPR) sensor based on channel photonic crystal waveguide (PCW) is proposed. The PCW is based on widely used lithographic and nano-fabrication compatible materials like TiO₂ and SiO₂. Gold has been used as a SPR active metal. By rigorously optimizing the different waveguide parameters, we have shown that there is significant transfer of modal power around phase-matching or resonance wavelength which has been utilized to design a compact and highly sensitive sensor for lab on chip. The ultra narrow width (∼765 pm for an interaction length of 10 mm) of surface plasmon resonance curve and sensitivity as high as 7500 nm-RIU⁻¹ will open a new window for bio-chemical sensing applications.     

Use of a low refractive index prism in surface plasmon resonance biosensing

A way to improve the angular sensitivity of surface plasmon resonance (SPR) biosensor by tuning the resonance position to a higher incident angle region using a lower refractive index glass prism is described in this paper. A novel effective 3-layer (E3L) model is described to transform a multiple layer biosensor configuration in context of SPR condition. The E3L model supports the use of a low refractive index prism for biosensing. The performance of the sensor in immunosensing is checked for two glass prisms of different refractive index materials. The experimental results showed an enhancement in the amount of resonance angle shift of the immunosensor for the lower refractive index glass prism.     

Diffractive optical coupling element for surface plasmon resonance sensors

Design, technological features, and performance of polymeric diffractive optical coupling elements (DOCEs), developed for surface plasmon resonance (SPR) sensors are reported. The concept is based on input and output coupling of collimated and perpendicularly incident light beams to exchangeable SPR sensor chips. In the SPR sensor chips, one DOCE couples the input light beam to a (bio-)chemical sensor surface and another DOCE images the output light beam onto a detector array. The manufacturing technique is based on an injection moulding process similarly to the manufacturing process of compact discs allowing precision manufacturing and reproduction of the grating topography of the DOCEs. The DOCE-based SPR sensor chip is specifically suitable for miniaturisation and large scale production, while maintaining high optical quality and performance.     

Fast surface plasmon resonance imaging sensor using Radon transform

Surface plasmon resonance (SPR) imaging technique is proposed in which a diverging laser beam at given frequency was used to illuminate the entire sensor surface in Kretschmann-Raether configuration. A pattern of dark intensity line on bright background is observed corresponding to the SPR dip at an angular range depending on the refractive index of the adjacent analyte and monitored by a two-dimensional CCD detector. A novel Radon transform based detection algorithm for the SPR line pattern is proposed, which is non sensitive to the laser speckle noise and improves the accuracy.