共查询到20条相似文献,搜索用时 156 毫秒
1.
火灾监测预警系统及其部件的研究是消防产品中最活跃、最具挑战性的领域.本文介绍火灾监测预警的发展历史,分析当今国内外火灾监测预警系统的现状,分析我国与发达国家在该领域的差距和原因.而后研究了国际上、国外和国内在该领域标准化的情况,分析了其在该领域的规范引领作用.最后基于以上介绍和分析,对未来我国火灾监测预警系统的发展提出建议. 相似文献
2.
在大跨悬索桥结构损伤预警方法研究的基础上,详细研究了润扬大桥悬索桥结构损伤预警系统的设计与实现方法。结构损伤预警系统采用基于“环境条件归一化”模态频率和小波包能量谱的损伤预警方法,并采用两阶段设计方法分别完成在线损伤预警分析和离线损伤预警分析。采用Client/Server和扩展Browser/Server两种系统模式相结合的形式将损伤预警系统与结构健康监测其他子系统相互结合,并采用LabVIEW软件编制了润扬大桥悬索桥结构损伤预警系统软件。该软件的主要功能包括在线模态频率识别和小波包能量谱识别模块:结构损伤预警参数与环境因素之间的相关性分析与统计建模模块;结构异常状态监测与预警分析模块。 相似文献
3.
由于现代楼宇建筑形式向着高层发展,先前的人工消防系统已不满足高层建筑消防要求,而把智能控制新技术引进应用在楼宇火灾预警中。文章明确介绍了智能控制系统,及其在楼宇火灾预警系统中的应用和应用中应注意的要点。 相似文献
4.
5.
本文阐述了食品安全预警国内外发展概况,并提出食品安全预警的有效性取决于预警的准确性、预警的提前量以及是否被决策者采用。为了达到预警系统的持续有效,决策者、管理层应根据我国的实际情况,理清预警系统运行过程中各机构、各层次的职责,加快标准的制修订,加强实验室建设,并在此基础上制定合理的预警指标,实现预警的有效性。 相似文献
6.
7.
火灾事故的频发带来了众多危害。常见的商业火灾预警器存在预警响应速度较慢、易损坏等弊端,因而新型火灾早期预警传感器的研发与制备必不可少。近年来,基于氧化石墨烯(GO)在高温或火焰条件下的热还原所引起的电阻变化而实现的新型火灾早期预警传感器引起了广泛的关注。本文对近年来国内外针对热阻型GO基火灾早期预警传感器的研究进展进行了综述。首先,简述了GO基火灾早期预警传感器的工作原理;然后,以GO基材料的制备方法及GO在材料中的分布作为分类依据,从含GO本体材料与GO涂层类材料两大类详细介绍了GO基火灾预警传感器的发展历程与研究现状。此外,还结合热阻型GO基火灾早期预警传感器的特殊性能,介绍了当下其在不同需求与不同场所中的实际应用;最后,对目前GO基火灾早期预警传感器的研究结论进行了总结,并对其研究前景进行了展望。 相似文献
8.
提出了一种以光纤分布式扰动传感器为核心,通过随油气管线一同敷设的标准通信光缆为传感介质的新型光纤管线预警系统.该系统利用激光干涉的原理对扰动信号进行实时探测,从而实现对挖掘、偷盗和第三方破坏等事件导致的扰动的实时监测和定位,从而达到管线安全预警的功能.该预警系统成功研制后分别在津唐输油处石油管线和杭州至嘉兴天然气管线进行了多次外场测试,该系统能在长达60 km的管线上实现250 m的定位精度,具有很好的定位稳定性.其测试结果表明:与传统油气管线监测手段相比,该系统具有无需外场供电、本质安全、灵敏度高,监测距离长、可定位以及可预警监测等技术优势,是未来油气管线监测的发展趋势. 相似文献
9.
潘伟伟 《中国新技术新产品》2023,(12):143-145
为了确保能及时发现消防水系统的安全问题,需要对消防水系统进行监测预警。这次研究提出了一种采用时间序列预测算法的消防水系统监测预警系统,通过时间序列算法构建数据预测模型。结果表明,这次研究构建的数据预测模型不仅在水压预测中与真实值相差仅0.002MPa,可达到0.023%的最低误差,最快在35ms内实现所有模块的响应。因此这次研究对提高消防水系统的监测预警精度具有重要意义。 相似文献
10.
11.
目的 综述无卤阻燃环氧树脂的最新研究进展,为开发高效阻燃封装材料提供研究思路和技术指导。方法 采用文献调研法介绍无卤阻燃环氧树脂的种类、阻燃机理,总结当前无卤阻燃环氧树脂在电子封装领域的应用现状和技术进展,并对其未来发展趋势进行展望。结果 与本征型无卤阻燃环氧树脂和反应型无卤阻燃环氧树脂相比,填充型无卤阻燃环氧树脂具有工艺简单、种类齐全、性能高效等优点,成为无卤阻燃环氧树脂中应用最广的种类。结论 无卤阻燃环氧树脂能够有效提升电子封装材料的火灾安全性,延长电子器件的使用寿命,促进5G电子器件的高速发展。 相似文献
12.
13.
针对装有军用油料的油箱在战场可能面临的苛刻条件(外部火烧、枪击等),以军用柴油为主体,通过特殊工序制造了两种配方的安全柴油。使用50 L的模拟油箱,分别装填军用柴油和两种安全柴油,在野外试验场地开展了内部强起爆条件下的3种柴油样品的爆炸试验,使用高速摄像装置和红外热成像系统对3种油样的爆炸过程进行记录,并对其爆炸温度场进行测试。结果表明:两种配方的安全柴油都有明显的阻燃抑爆效果。通过建立其阻燃抑爆性能评估标准发现,安全柴油在对爆炸火球高温持续时间和池火的抑制上有明显效果。 相似文献
14.
15.
In this study the applicability of the new flame retardant for the intumescent fire retardant coating (IFRC) daubed on the top of the plywood was investigated. The following are the three kinds of flame retardants used in this study: (1) the artificial mesophase graphite powder (MGP), (2) the sericite (Al4(OH)4(KAlSi3O10)2), and (3) the graphite/sericite mixture. The desirable sizes of MGP and sericite were obtained by sieving, and then the surfaces of MGP and sericite were modified using a mechanofusion system. The MGP and sericite were characterized using a scanning electron microscope (SEM), a particle size analyzer, and an energy dispersive spectrum (EDS). The IFRC, which consisted of 19.8% of the flame retardant, 15% of the dehydrate agent, 18% of the foaming agent, 7.2% of the resin binder, and 40% of the solvent, was prepared and daubed on the top of the plywood. The test of the fire protection of IFRC was conducted using a flammability 45° tester. The IFRC with the flame retardant of the raw MGP (or sericite) was also prepared to study the effects of the size distribution and the configuration of the flame retardant on the capability of fire protection of IFRC. The mass ratio of MGP to sericite also substantially affects the capability of fire protection of IFRC. Most interestingly, the capability of the fire protection of IFRC with the flame retardant of the raw material is better than that of IFRC with the flame retardant of the sieved and surface-modified material. 相似文献
16.
聚氨酯阻燃材料及其应用 总被引:2,自引:0,他引:2
介绍了聚氨酯材料的阻燃方法及低烟雾聚氨酯弹性体、阻燃剂微胶囊化等新的研究动 向,并概述了聚氨酯阻燃材料在建筑、运输、灌封胶、涂料等领域的应用。 相似文献
17.
采用层层自组装法(LBL),在剑麻纤维素微晶(SFCM)表面交替吸附壳聚糖(CH)和聚磷酸铵(APP)构筑CH-APP阻燃涂层,成功制备(CH-APP)n/SFCM阻燃复合材料。通过Zeta电位分析仪、FTIR、TGA、POM、垂直燃烧法(VFT)、SEM手段对复合材料的结构和性能进行表征。FTIR、Zeta电位结果表明,CH和APP在SFCM表面电位正负交替变化,CH-APP涂层成功包覆在SFCM表面; POM和SEM结果显示,组装后(CH-APP)n/SFCM复合材料表面变得粗糙,其表面包覆了一层较厚涂层; TGA结果表明,随着吸附CH-APP组装层数的增加,(CH-APP)n/SFCM复合材料的初始分解温度(T5%)由279.4℃降低至243.1℃,残炭率由11.24%提高至32.06%; VFT测试结果表明,随着组装层数的增加,(CH-APP)n/SFCM复合材料阻燃性能明显提高,组装10层的(CH-APP)10/SFCM复合材料甚至可以达到离火自熄的程度。 相似文献
18.
The nano-concentrates and fiame retardant nano-coating were prepared in thhis study. The effect of nano-SiO2 on the corrosion resistance and fire resistance of ammonium polyphosphate-pentaerythritol-melamine (APP-PER-MEL) coating was investigated by differential thermal analysis (DTA), scanning electron microscopy
(SEM), effective thermal conductivity (λ/d), X-ray photoelectron spectroscopy (XPS) and fire protection test. The chemical action and endothermic effect of ammonium polyphosphate, pentaerythritol and melamine in traditional flame retardant coating were damaged by salt spray condition, whereas the flame-retardant additives in the nano-coating demonstrated the good chemical interaction in salt spray condition. The uniformly dispersed nano-SiO2 particles could improve corrosion resistance of the coating, and hence nano-coating could remain the good fire-resistant properties even after 500 h salt spray test. 相似文献
19.
Crumpling and Unfolding of Montmorillonite Hybrid Nanocoatings as Stretchable Flame‐Retardant Skin
下载免费PDF全文
![点击此处可从《Small (Weinheim an der Bergstrasse, Germany)》网站下载免费的PDF全文](/ch/ext_images/free.gif)
Ting‐Hsiang Chang Yuan Tian Daniel L. Y. Wee Hongliang Ren Po‐Yen Chen 《Small (Weinheim an der Bergstrasse, Germany)》2018,14(21)
Flame‐retardant coatings are widely used in a variety of personnel or product protection, and many applications would benefit from film stretchability if suitable materials are available. It is challenging to develop flame‐retardant coatings that are stretchable, eco‐friendly, and capable of being integrated on mechanically dynamic devices. Here, a concept is reported that uses pretextured montmorillonite (MMT) hybrid nanocoatings that can undergo programed unfolding to mimic the stretchability of elastomeric materials. These textured MMT coatings can be transferred onto an elastomeric substrate to achieve an MMT/elastomer bilayer device with high stretchability (225% areal strain) and effective flame retardancy. The bilayer composite is utilized as flame‐retardant skin for a soft robotic gripper, and it is demonstrated that the actuated response can manipulate and rescue irregularly shaped objects from a fire scene. Furthermore, by depositing the conformal MMT nanocoatings on nitrile gloves, the firefree gloves can endure direct flame contact without ignition. 相似文献
20.