Maxillary sinus augmentation using different grafting materials and dental implants in monkeys. Part I. Evaluation of anorganic bovine-derived bone matrix

The aim of this study was to evaluate clinically, histologically and histometrically the use of anorganic bovine bone matrix (i.e. Bio-oss) as a grafting material for maxillary sinus augmentation procedures. In 4 adult male rhesus monkeys (i.e. Macaca mulatta) the 1st, 2nd and 3rd maxillary molars on one side of the jaws were extracted. The remaining bone between the alveolar crest and the bottom of the sinus was then reduced to 3-4 mm. After 3 months, maxillary sinus augmentation procedures were performed on one side of the jaws in each monkey and the sinuses were grafted with the bovine bone matrix. At that time, 2 IMZ pure titanium plasma coated implants were immediately placed into the augmented sinuses (i.e. simultaneous implants-loaded group). After 4 months, 2 additional similar implants were placed into these previously augmented sinuses (i.e. delayed implants-loaded group). Four months later, the abutment connection was performed and all 4 implants were loaded with a gold-alloy bridge for 6 months (i.e. until sacrifice of the animals). The contralateral side of each monkey received the same treatment with the exception that the extractions were performed 7 months after those in the opposite side and that the implants in this side were not loaded. Thus, 2 additional study groups (i.e. simultaneous implants-unloaded group and delayed implants-unloaded group) were obtained. Clinically, all loaded implants were stable at the day of sacrifice. Histologically, the grafted sinuses exhibited significant bone formation with integration of the bovine bone matrix particles to the new bone. Direct mineralized bone-to-implant contact was greater for the delayed implant placement groups than for the implants installed simultaneously with the sinus augmentation. Furthermore, the percentage of direct mineralized bone-to-implant contact was greater in the residual bone than in the augmented area. It was concluded that the anorganic bovine bone matrix facilitated bone formation and implant osseointegration in the augmented sinuses and that the delayed implant placement in combination with the sinus augmentation procedure seemed to be preferable.     

Histologic analysis of clinically retrieved titanium microimplants placed in conjunction with maxillary sinus floor augmentation

In this study, a new approach involving placement and subsequent retrieval of titanium microimplants was employed for the histologic investigation of the implant-tissue interface in conjunction with maxillary sinus floor augmentation. Nine patients scheduled for sinus floor augmentation and simultaneous placement of Br?nemark implants were included in the study. After a sinus graft procedure and placement of implants, an additional microimplant was placed into the graft through the lateral wall of the sinus. At abutment connection, the microimplants were retrieved using a 3- or 5-mm-wide trephine drill. Six specimens were retrieved after 6 to 14 months from sites augmented with particulate radiated mineralized cancellous allograft. Another six implants were retrieved after 6 to 12 months from maxillary sinuses augmented with particulate autogenous bone grafts. The histologic analysis showed distinct differences between the two types of grafts. The sites with autogenous bones grafts displayed a normal morphology of bone and bone marrow, including formation of bone on the surfaces of the grafted particles and remodeling of newly formed as well as grafted bone. The bone was more mature after 11 to 14 months than at 6 months. The allografted sites had a mixed morphologic appearance of newly formed bone and nonviable allograft particles (about 75% of the total bone area) in loose connective tissue. Significantly more bone was found at the autografted than at the allografted implants. The use of autogenous bone for augmentation of the maxillary sinus floor resulted in a greater amount of viable bone surrounding the implant; however, simultaneous placement of implants apparently resulted in a low proportion of bone-implant contact after 6 to 14 months irrespective of graft type.     

Survival of cylindrical implants in composite grafted maxillary sinuses

PURPOSE: This retrospective study investigated the survival of dental implants placed in the maxilla after composite grafting of the sinus and an average of 55 months of loading. PATIENTS AND METHODS: Maxillary sinuses of 88 patients were grafted with autogenous cancellous bone combined with dense hydroxyapatite particles. After an average healing period of 3.4 months, hydroxyapatite-coated titanium endosseous implants were placed. A total of 388 implants were placed in grafted sinus floors, and 82 were placed in onlay grafted nonsinus position in the canine region. The implants were loaded with overdentures and fixed bridges 4 months (mean) after implantation, with a follow-up for a mean of 55 months. RESULTS: The cumulative implant survival was calculated according to the Kaplan-Meier method. Implant survival from the time of loading was 89% in full reconstructed cases and 90% in partially edentulous cases. The overall cumulative implant survival rate, including the loss in the surgical stage, was 82%. CONCLUSION: Implant loss in composite grafted maxillae after 70 months of follow-up was similar to loss in nongrafted maxillae.     

Guided bone regeneration around dental implants in the atrophic alveolar ridge using a bioresorbable barrier. An experimental study in the monkey

The aim of this study was to evaluate guided bone regeneration (GBR) around dental implants placed in atrophic alveolar ridges using an experimental, nonporous bioresorbable barrier. In 8 Rhesus monkeys, the maxillary canines and lateral incisors were extracted bilaterally and the remaining alveoli were reduced to create atrophic ridges. After a healing period of 3 months, soft tissue expansion was performed using a subperiosteal tissue expander. After 1 month of tissue expansion, and IMZ implant was placed in the atrophic ridge on each side in such a way that its coronal 4 mm to 5 mm remained circumferentially exposed above the bone level. The test implants were covered with a bioresorbable barrier made of poly (D,L-lactid-co-trimethylencarbonate) in a 70/30 ratio, whereas the control implants were covered with a nonresorbable expanded polytetrafluoroethylene (e-PTFE) barrier. The e-PTFE barriers were stabilized with titanium minipins while the bioresorbable barriers were analogously fixed using bioresorbable minipins made of poly (L-lactid-co-D,L-lactid) 70/30. Clinical healing progressed uneventfully in both groups and no soft tissue dehiscences occurred. Histometric and histomorphometric analyses were performed 5 months post surgery. Both test and control implants exhibited direct bone-to-implant contact to variable extents. The mean direct mineralized bone-to-implant contact length fraction was 32% of the total implant length in the test sites and 58% in the control sites. Control sites exhibited significantly greater bone fill compared to the experimental sites (P < 0.001). Histologic observations of test specimens demonstrated a moderate inflammatory reaction related to the degradation and resorption products of the barrier. In conclusion, the nonresorbable e-PTFE GBR barrier was found to be superior to the bioresorbable barriers tested in the present investigation.     

Clinical assessment of olfactory dysfunction in Parkinson''s disease

The possibility of placing endosseous implants in the edentulous maxilla is frequently reduced by inadequate bone volume of the residual ridge. In totally edentulous maxillae with knife-edge conformation, insufficient thickness is frequently associated with insufficient height of the residual ridge in the posterior maxilla because of pneumatization of the maxillary sinuses. This surgical method combines grafting of the maxillary sinuses, onlay grafts on the buccal side of maxillary posterior segments, and sagittal osteotomy of the anterior maxilla with interpositional bone grafts. Five to six months after maxillary reconstruction, Br?nemark implants were placed and, after osseointegration occurred, implant-supported dental prostheses were fabricated. Three patients have been treated with this method and 22 implants have been placed. The mean follow-up after final prosthetic rehabilitation has been 16 months; survival rate has been 100%. Despite the small number of patients and the short follow-up, preliminary results have shown very promising results.     

Indirect sinus augmentation procedures using one-stage anatomically shaped root-form implants

Sinus augmentation procedures are a standard part of implant dentistry. Indirect sinus augmentation procedures reduce the magnitude of the surgery when sinus lift procedures are necessary. This article describes a variation of the indirect augmentation of maxillary sinuses. The surgery is performed through small diameter surgical access openings. This modified indirect sinus augmentation procedure is combined with the immediate placement of one-stage dental implants that effectively seal the surgical access openings and have an anatomical exit profile for easier restoration.     

An in vitro and in vivo study of cytokines in the acute-phase response associated with bisphosphonates

The aim of this investigation was to evaluate clinically and histologically a new custom-made, root analogue titanium implant placed into extraction sockets in monkeys (Macaca fascicularis). Three adult monkeys were used in this investigation. After raising full thickness flaps on the buccal and lingual side, the upper central and lateral incisors were extracted. Each tooth root was machine copied to 1 titanium analogue using a new CAD/CAM-system. The implants were installed in the respective extraction sockets and the flaps sutured back. After 6 months of healing biopsies were taken and processed according to the cutting-grinding technique. The percentage of mineralized bone-to-implant contact was measured as a fraction of the rough implant surface using computer-assisted analysis. The main clinical problem that occurred during implant placement was the fracture of the buccal alveolar wall. The histometric evaluation showed a mean mineralized bone-to-implant contact of 41.2 +/- 20.6%. In this investigation it could be shown that implants fabricated by laser copying will osseointegrate. The presented data encourage the performance of clinical and experimental trials evaluating the new system utilizing improved second generation CAD/CAM equipment. Such studies are currently underway.     

Maxillary sinus augmentation in the non-human primate: a comparative radiographic and histologic study between recombinant human osteogenic protein-1 and natural bone mineral

The posterior maxilla has traditionally been one of the most difficult areas to successfully place dental implants due to poor bone quality and close approximation to the maxillary sinus. Sinus augmentation procedures have become a viable means of assuring adequate bone for the placement of dental implants in this area. However, with the techniques currently employed, a considerable variation in the quality of bone attained with the sinus augmentation procedure exists. The purpose of this in vivo study was to evaluate the healing response and bone formation stimulated by 3 doses of recombinant human osteogenic protein-1 (rhOP-1), 0.25, 0.6, and 2.5 mg OP-1 per gram of collagen matrix; natural bone mineral; or collagen matrix alone (control) placed in the maxillary sinus of adult chimpanzees. Results were assessed using clinical, histologic, and radiographic techniques. Radiographic analysis of the computed tomography scans taken at 1 week, and 2.5, 4.5, and 6.5 months revealed a more rapid mineralization with the 2.5 mg OP-1/g collagen matrix and natural bone mineral treatment groups. The incremental bone mineral density (BMD) increase for these 2 treatments from 1 week to 2.5 months was over 2.5 times the increase found with the collagen matrix alone; these 2 treatments also had a higher BMD at the most superior slices evaluated when compared to the other 3 groups. Biopsy specimens were taken at 3.5, 5.5, and 7.5 months and for all 5 treatment groups bone formation was observed at all time points in the majority of the specimens. At 7.5 months the 2.5 and 0.6 mg OP-1/g collagen matrix treatment groups had an increase in the percent bone area when compared to the matrix alone control. In conclusion, these results demonstrate that sinus augmentation with natural bone mineral or 2.5 mg OP-1/g collagen matrix induce comparable radiographic and histologic evidence of bone formation and that both of these treatments performed superior to the control group of collagen matrix alone based upon all methods of evaluation.     

Short-term healing following the use of calcium sulfate as a grafting material for sinus augmentation: a clinical report

Because of the frequent lack of bone in the posterior maxilla, sinus augmentation has become a commonly practiced treatment modality. Many different materials have been used for augmenting the sinus, and the ideal graft is yet to be found. The present article reports the results of sinuses grafted with calcium sulfate in 2 patients. Bone biopsies were harvested 9 months after the augmentation procedure. In the first patient, 3 titanium threaded-cylinder implants were placed in the grafted area after 9 months, while in the second, 1 acid-etched, screw-shaped titanium implant was placed simultaneously with the graft. Light microscopic evaluation revealed new bone formation with ongoing remodeling and progressive lamellar maturation in the specimens. No remnants of the alloplastic material were detectable in any section, either within the bone or in the medullary tissue. When reevaluated at the uncovering procedure, the implants were radiographically and clinically judged to be osseointegrated. These observations suggest that, when used in the appropriate form and with the proper technique, calcium sulfate is a promising graft material for sinus augmentation, producing adequate quantity and quality of new bone for implant placement.     

Bone augmentation at titanium implants using autologous bone grafts and a bioresorbable barrier. An experimental study in the rabbit tibia

The aim of the present investigation was to compare the effect of using autologous bone particles covered with a bioresorbable matrix barrier with the use of bone particles alone on bone augmentation at titanium implants installed in the rabbit tibia. Two Br?nemark System implants, one in each tibia, were inserted in each of 9 rabbits in such a way that 5 threads were not covered with bone. Autologous bone particles were harvested from the skull and placed over the exposed implant surfaces on each tibia. The bone graft on one tibia was covered with a Guidor Matrix Barrier, while the bone graft on the other tibia served as a control. After a healing period of 12 weeks, the animals were sacrificed and specimens taken for histomorphometrical analyses. The analyses showed that a significantly larger volume of augmented bone tissue had formed at the test sites. There were, however, no differences in the amount of mineralized bone. In fact, the difference in tissue volume was due to an increased amount of bone marrow at the test sites. The degree of mineralized bone to implant contact as well as the degree of mineralized bone within the threads at the test implants were similar to that at the controls. In conclusion, it was found that the coverage of particulate autologous bone grafts with a bioresorbable barrier resulted in a larger volume of augmented bone than the use of bone grafts not covered with a barrier.     

The use of osteotomes for sinus augmentation at the time of implant placement

The placement of endosseous dental implants is often hampered by the loss of alveolar bone. In the posterior maxilla, the presence of the maxillary sinus and less-dense bone present additional obstacles to successful implant placement. Existing methods of subantral augmentation require extensive surgical manipulation, often including a second surgical site for harvesting autogenous bone. The development of surgical osteotomes has facilitated the placement of implants in areas of minimal alveolar bone height in the posterior maxilla. This article describes the osteotome technique for sinus augmentation at the time of implant placement and presents a short-term evaluation of 34 implants placed in 18 patients.     

Mean fetal growth curve adjustment]

OBJECTIVE: Three-dimensional models created by milling machines and stereolithography on the basis of 3-dimensional computed tomography scans have become essential in the diagnosis and therapy planning of oral and maxillofacial disorders. The purpose of this study, based on 3 clinical cases, was to examine the advantages of using 3-dimensional computed tomography scans and 3-dimensional milling models of the maxillary sinus before operative sinus elevation and of developing an operative layout with the aid of 3-dimensional models. REPORT DESIGN: Three patients with atrophy of the maxillary alveolar ridge received computed tomography scans before operative sinus elevation with iliac bone transplants and simultaneous dental implantation. These computed tomography data were used to create 3-dimensional graphic and plastic reconstructions of the maxillary sinuses. RESULTS: The 3-dimensional milling models enabled the development of an exact preoperative layout that took into consideration the exact shape of the iliac bone and the selection of dental screw implants. Furthermore, the models offered the possibility of producing an acrylic device for precise implant insertion. Precise planning resulted in good success with implantation 2 years after surgery. CONCLUSION: Three-dimensional diagnosis and treatment layout have become an acknowledge method of operative maxillary sinus floor augmentation combined with simultaneous dental implantation in the upper jaw in difficult cases of sinus lift operations. As far as transplant shape and sinus anatomy are concerned, this has resulted in greater intraoperative precision. A 1-step procedure can thus be performed for augmentation and implantation through use of a well-adapted block transplant and dental screw implants in patients with extensive alveolar ridge atrophy.     

Chromosomal localization of a human mucin gene (MUC8) and cloning of the cDNA corresponding to the carboxy terminus

The objective of this study was to determine the predictability of endosseous implants placed in a maxillary sinus grafted with a mixture of bovine porous bone mineral and demineralized freeze-dried bone. Sixty implants were placed in 20 patients representing 28 sinuses using either a one- or two-stage technique. After an implant loading period of more than 2 years, the survival rate (eg, a clinically functioning implant without signs of mobility or infection) varied from 90% to 96%. No infections or other complications were encountered. The data suggest that this treatment regimen can result in a high rate of survival.     

Histologic changes in the sinus membrane after maxillary sinus augmentation in goats

PURPOSE: Previous studies have reported on the morphologic aspects of bone regeneration after maxillary sinus grafting. However, no previous studies have examinated the morphology of the maxillary sinus mucosa after grafting. The purpose of this study was to evaluate the histologic changes in the lining membrane after sinus augmentation. MATERIALS AND METHODS: A unilateral osteotomy of the lateral maxillary wall, medial displacement of the bony segments, and elevation of the sinus mucosa were performed in 12 goats. An autogenous bone graft combined with coralline particles was placed on the floor of the sinus in three animals, and coralline particles alone were placed in three other goats. Six goats were not grafted and were used as controls. Samples were harvested at 2.5, 4.5, and 6.5 months. The maxillary sinus mucosa was examined using light microscopy and scanning and transmission electronic microscopy. RESULTS: The coralline particles were surrounded by fibrous connective tissue when used alone. The addition of iliac crest bone to the coralline particles stimulated bone formation. After the sinus augmentation, the mucosal lining showed a lack of glands in the lamina propria, and the epithelium showed an increase in goblet cells. CONCLUSION: It was concluded that the sinus mucosa undergoes physiologic adaptations and remains healthy and free of chronic sinusitis after maxillary sinus grafting.     

Cloning, characterization, and chromosomal localization of human superillin (SVIL)

The specific aim of this study was to determine the response of alveolar bone after it was augmented vertically using distraction osteogenesis and subsequently loaded with implant restorations. Four dogs each had four implants placed horizontally into an edentulous mandibular quadrant and, after integration, a distraction osteogenesis device was fabricated in the laboratory. An osteotomy was made to allow the crest of the alveolar ridge to be distracted vertically. After 10 mm of vertical distraction, the device was stabilized with light cured resin. Following bone fill confirmation of the distraction gap at 10 weeks, two implants were placed into the ridges, one in distracted bone and one in nondistracted bone. After 4 months for implant integration, freestanding prostheses were fabricated. Crestal bone levels were evaluated throughout the period of function. Animals were sacrificed after 1 year of loading, for histologic evaluation of the bone. The vertical ridge augmentation averaged 8.85 +/- 1.05 mm after 10 weeks of healing following distraction, without change over 1 year of implant loading. Histologic examination showed that bone had formed between the distracted segments, creating an augmented ridge. The average thickness of the labial cortex in the distraction gap was significantly thinner than the lingual cortex in distracted bone and the lingual and labial nondistracted cortical bone. The presence of the dental implant did not significantly affect cortical bone thickness. Serial sections showed that implants remained integrated and functional without soft tissue inflammation. Dental implants placed into alveolar ridges augmented with the technique of distraction osteogenesis maintained bone and were functional for the length of this study.     

Inhibition of eFGF expression in Xenopus embryos by antisense mRNA

This pilot study analyzed the bone reactions to early loaded titanium plasma-sprayed implants. A total of 24 titanium plasma-sprayed implants (12 in the maxilla and 12 in the mandible) (Primary Healing Implant, Legnano) were inserted into four Macaca fascicularis monkeys with instruments specially designed to obtain a precise fit of the implant in the bone socket. A metal superstructure was cemented into 10 mandibular and 10 maxillary implants 15 days after implant insertion. The four remaining implants were used as controls. Eight months after implant placement, a block section was carried out, the defect was filled with nonresorbable hydroxyapatite, and all 24 implants were retrieved. The implants were treated to obtain thin ground sections that were examined under normal and polarized light. Histologic analysis showed that bone was observed around the implant surface in all implants. Morphometric analysis demonstrated that bone lined 67.2% (SD = 3.1%) of the maxillary implant surface, and 80.71% (SD = 4.6%) of the mandibular implant surface. No differences were found in the percentage of bone-implant contact in the control implants. In the loaded implants, however, the bone around the implants had a more compact appearance. The study demonstrated that it is possible to obtain a high percentage of bone-implant contact in early loaded titanium plasma-sprayed implants.     

The effects of guided bone regeneration and grafting on implants placed into immediate extraction sockets. An experimental study in dogs

Guided bone regeneration (gbr) for the treatment of insufficient bone volume around implants can be performed using membranes with or without grafting materials (i.e., autogenous, allogenous, xenogenous, or alloplastic grafts). A possible way to evaluate the quality of implant osseointegration is the torque necessary to remove implants from their bony housing. The aim of this study was to compare the torques necessary to remove dental implants from implant beds reconstructed with different bone substitutes and GBR or GBR alone in 6 adult mongrel dogs. All mandibular premolars were extracted and 3 extraction sockets on each side were enlarged using a trephine bur. A 13 mm titanium screw-type dental implant (3.75 mm diameter) was placed in each enlarged extraction socket so that only the apical 3 to 4 mm were engaged in bone. The 3 defects were then randomly treated with either 1) canine demineralized freeze-dried bone allograft (DFDBA) plus GBR using an expanded polytetrafluoroethylene membrane (DFDBA+GTAM); 2) bioabsorbable hydroxyapatite and GBR (HA+GTAM); or 3) GBR (GTAM alone). After 6 months, the torque to remove the implants was measured in 4 animals and analyzed using ANOVA. There were no statistically significant differences between the 3 groups (GTAM alone: 46.37+/-16.41 Ncm; HA+GTAM: 46.00+/-16.59 Ncm; DFDBA+ GTAM: 52.15+/-29.24 Ncm). In addition, the influence of early removal of barriers on the torque values was evaluated with the t-test. Comparing exposed versus retained membranes by treatment modality, the only statistically significant difference was found in the DFDBA+GTAM group. When the torque values of all implants with exposed and retrieved membranes were compared to all those with retained membranes a significant difference could be detected. Histologic sections were prepared from the 2 dogs not included in the removal torque testing. In the histometric analysis the GTAM alone group showed a mean mineralized bone-to-implant-contact of 27.1%, the DFDBA+GTAM group of 34.6%, and the HA+GTAM of 39.3%. The mineralized bone-to-implant-contact of the HA+GTAM group was significantly higher than that of the GTAM alone group. In addition, the mineralized bone-to-implant-contact was divided into an apical and coronal part using the apical seventh thread as the dividing landmark. In the apical region, there was no significant difference between the groups regarding mineralized bone-to-implant-contact. In the coronal part the mineralized bone-to-implant-contact of the GTAM alone group was significantly lower compared to the other 2 groups. Within the limits of this investigation, it can be concluded that the type of grafting material will not influence torque removal values, but that early membrane exposure and removal will negatively influence the torque measurements. The combination of GBR with a bone substitute increased the mineralized bone-to-implant contact.     

Clinical evaluations of a porous-surfaced endosseous implant system

Clinical evaluations of a new porous-surfaced implant concept (Endopore) in a large population of fully and partially edentulous patients are reported, and a technique of spreading buccal and lingual plates with osteotomes to place these implants in proximity to the sinus of the posterior maxilla is described. Three-dimensional, interconnecting pores on this implant's bone interface surface give a great surface area for bone engagement. When the maxilla is prepared by this spreading procedure, these implants can be successfully placed in areas having limited available bone. Our success rates are 97.0% for implants stabilizing a mandibular overdenture and 94.8% for implants placed in partially edentulous patients. Many times, sinus lift or other augmentation procedures can be avoided in the maxilla and mandible, allowing for less patient morbidity and for an implant reconstruction that is more affordable for the patient.     

Magnetic resonance imaging lesion analysis in neurofibromatosis type 1

The purpose of this prospective study was to investigate the clinical outcome and marginal bone resorption of three different endosseous implants placed in the anterior mandibles of 15 elderly patients. Eleven women and 4 men (ranging from 65 to 80 years, mean 71 years) had three different endosseous implants placed in the anterior mandible; one titanium plasma-sprayed cylinder implant (4-mm diameter), one titanium cylinder implant with hydroxyapatite coating (4-mm diameter), and one standard threaded titanium implant (3.75-mm diameter). Three months later, at the second-stage surgical procedure, ball abutments were connected and an overdenture was placed. At 12, 24, and 36 months, marginal bone resorption and Periotest values were recorded. None of the implants was lost in this period. An analysis of variance with repeated measurement was performed annually to test the existence of significant differences between the implants. When differences appeared, paired t tests were used to identify which differences were significant. Bonferroni multipliers were used to adjust for multiple testing. When marginal bone resorption was concerned, threaded titanium and hydroxyapatite-coated implants had significantly better scores than titanium plasma-sprayed cylinder implants. Periotest values for hydroxyapatite-coated implants were significantly better than test values for the other implants after 2 years. After 3 years significance was obtained between hydroxyapatite and screw-shaped implants only (P < .05). It was concluded that titanium plasma-sprayed cylinder implants have a less favorable prognosis than the other implants used in this study.     

Histologic evaluation of the LaminOss osteocompressive dental screw: a pilot study

This animal study compared the response of canine mandibular bone using the orthopedic principle of osteocompression by the function of an immediately loaded dental implant vs an unloaded dental implant of the same design and size. Two dogs were partially edentulated in the mandible. A total of 8 osteocompressive screw implants, 2 per quadrant were placed and evaluated histomorphometrically after 3 days in 1 dog and after 3 months in the second dog. The second dog had a two-unit fixed bridge placed immediately postsurgically in occlusal function on the right side; on the left side, the implants were splinted out of occlusion as a control. Histologically, no bone necrosis was observed at the implant interface by any of the 8 implants for either period as a direct result of the 4-mm-diameter by 13-mm-length implant design. Clinical parameters did not differ among the implants; however, at 3 months, the immediately loaded implants demonstrated more than twice the amount of bone density at their surfaces compared to the unloaded implants of the same design. Future human clinical research would be necessary to provide a meaningful statistical analysis to validate the importance of this implant design and the function of osteocompression.