共查询到20条相似文献,搜索用时 125 毫秒
1.
挤出成型是塑料成型加工工艺中的主要加工方法之一。本文讨论的就是挤出机主机变频传动控制的一些要点,并介绍了ABB,安用和欧陆变频器的应用情况。 相似文献
2.
挤出成型是塑料成型加工的重要方法之一,在塑料挤出机控制系统中采用变频调速技术具有降低生产能耗、提高生产率和产品质量、减少启动时对电网的冲击等优点。本文分析了塑料挤出机的工艺流程,介绍了挤出机变频控制原理,阐述了变频技术矢量控制的方法,针对MD380系列变频器进行了参数设置。实际应用表明,该系列变频器具调速精度高、调速范围宽、运行稳定等特点,满足挤出机生产的各项工艺要求。 相似文献
3.
塑料成型加工技术讲座(14)──成型用塑料原材料的质量检验西北工业大学邱明恒(710072)成型加工用塑料原材料的质量检验项目,通常由原材料的供货情况,拟采用的成型技术和所加工制品的主要使用要求等多方面的因素决定。生产中成型用塑料原材料的质量检验、一... 相似文献
4.
塑料成型加工技术讲座(9)塑料模压成型西北工业大学张广成(710072)模压成型又称为压制成型,是指依靠外压的压缩作用实现成型物料造型的一次成型技术。根据成型物料的特点又可进一步分为压缩成型、传递模型、冷压烧结和层压成型,本讲主要介绍压缩成型和传递模... 相似文献
5.
6.
塑料成型加工技术讲座(10)塑料中空吹塑西北工业大学张广成西安710072塑料中空吹塑常简称为吹塑、或中空成型,是生产中空塑料制品最重要的成型技术。用这种成型技术,不仅可以生产数毫升的小容积瓶,也可以生产数千升的大容积桶和贮罐,还可以制造出浮球、汽车... 相似文献
7.
8.
塑料成型加工技术讲座(2)常用塑料品种简介西北工业大学(710072)张广成塑料是以合成树脂为主要成份,加入添加剂后组成的有机高分子材料。塑料工业包括塑料原料生产和塑料制品生产两大部门,是三大合成高分子材料中发展最快、产量最大、应用最广的行业。目前塑... 相似文献
9.
塑料成型加工技术讲座(11)塑料的热成型西北工业大学张广成(710072)热成型是一种以热塑性塑料板材和片材为成型对象的二次成型技术,其法一般是先将板、片材裁切成一定形状和尺寸的坯件,再将坯件在一定温度下加热到弹塑性状态,然后施加压力使坯件弯曲与延伸... 相似文献
10.
塑料成型加工技术讲座(3)成型物料的配制张广成(西北工业大学西安710072)1引言塑料加工行业用到的塑料原料,通常都是以合成树脂为主体添加各种助剂组成的复合物,这种复合物的形态可以分为粒状、粉状、溶液和分散体四大类。一般来说粒状和粉状适宜于注射和挤... 相似文献
11.
V. S. Vlasov L. N. Kotov V. G. Shavrov V. I. Shcheglov 《Journal of Communications Technology and Electronics》2011,56(1):73-84
Forced nonlinear precession of the magnetization vector in a normally magnetized magnetic plate under the conditions of an
orientation transition is considered. It is shown that, in the field lower than the form demagnetization field, the variable
circularly polarized field causes precession of the equilibrium position of the magnetization vector. It is demonstrated based
on a vector model in which the precession period of the equilibrium position is inversely proportional to the squared amplitude
of the variable field and the sine of the angle of deviation of the equilibrium position of magnetization from the constant
field. It is shown that the critical parameters necessary for excitation of precession of the equilibrium position are the
amplitude and frequency of the variable field. Diagrams determining domains of existence of precession of the equilibrium
position for different saturation magnetization of a magnetic plate are constructed in terms of the coordinates variable field
amplitude-frequency. The role of dissipation of magnetization oscillations in the determination of the critical parameters
is elucidated. The features of precession in the presence of asymmetric excitation and in the presence of anisotropy in the
plane of the plate are noted. 相似文献
12.
针对TD-LTE无线网络规划中时隙规划的需要,对TD-LTE小区帧配置方法进行了研究.首先归纳总结了TD-LTE系统吞吐量计算方法,通过仿真,验证了TD-LTE帧配置对系统容量的影响.然后研究了TD-LTE单业务小区的帧配置方法,设计建立了基于帧结构的TD-LTE小区业务吞吐量仿真平台,并对单业务小区的用户平均吞吐量进行了仿真分析,给出了部分单业务小区的最佳帧配置建议.最后,仿真分析了多业务小区的用户平均吞吐量,给出了部分混合业务下小区的最佳帧配置建议. 相似文献
13.
多光子Tavis-Cummings模型中运动原子与二项式光场相互作用的量子纠缠 总被引:2,自引:2,他引:0
利用全量子理论,研究了多光子Tavis-Cummings模型中运动原子与二项式光场相互作用系统的量子纠缠特性,讨论了不同初始状态下的二项式光场系数和原子运动速度对纠缠特性的影响.结果表明:二项式光场系数不影响场熵演化的周期性,但影响场熵峰值大小.随着原子跃迁光子数的增多,场熵演化的周期性和消纠缠现象逐渐消失.原子运动的速度影响场熵的演化周期,且影响场熵峰值的大小,而原子跃迁光子数的增大,会消弱原子运动速度对场熵演化的影响.当光场处于中间态,原子运动速度较低,且原子跃迁光子数较大时,光场与原子可以长久地处于量子纠缠态. 相似文献
14.
上世纪60年代初,香农的学生Gallager在他的博士毕业论文中首次提出了LDPC码的概念和完整的译码方法,但是直到上世纪末期,随着LDPC码译码理论的进步和计算机技术的发展,LDPC码才以其优良的误码性能和良好的可实现性成为人们研究的焦点。针对QC类LDPC码进行研究的时候,注意到很多码的循环子矩阵中不只有一组1,这就产生了水平运算后判断运算结果属于哪个存储模块的问题;另外,由于校验矩阵中每个循环子矩阵的列初始位置都是不同的,而且通常LDPC码的校验矩阵的循环子矩阵的数目都是非常庞大的,因此如果通过程序固化的方法,不但容易出现不易排查的错误,而且开发效率会大大下降。为解决该问题,并将解决方案通用化,文中以校验矩阵中循环子矩阵中1的排列特点为研究对象,找到引起变化的量之间的共性特征,从而实现通用化模块的设计。 相似文献
15.
轮式车辆和履带式车辆的分类是地面目标识别的难点之一.车轮旋转和履带的运动是典型的微动,其产生的微多普勒特征可作为两类车辆目标分类的重要依据.首先,针对短驻留条件下两类车辆目标的雷达回波,分析了两类目标不同微动导致的微多普勒特征差异;其次,基于目标回波短时平稳相关的性质,建立了目标回波的AR模型,采用前后向预测方法得到相应的AR模型系数,提出基于AR模型系数的车辆目标分类方法,并给出AR模型阶数的判定方法,对比了前后向预测系数特征与前向预测系数特征的可分性.最后,结合两类目标的实测数据,在回波预处理的基础上,通过提取实际回波数据的AR模型系数实现了车辆目标的分类,验证了方法的有效性和稳健性. 相似文献
16.
针对我国传统的医疗信息、医疗病历难以实现信息化、数字化管理的难题,文章基于Web技术对电子病历系统进行了设计开发。首先明确了系统的需求和设计目标,在此基础上给出了具体的系统功能设计和网络层次架构设计方案,并结合患者就医的实际过程,从电子病历数据表的建立、电子病历数据的信息化共享技术和Web服务的实现三个角度探讨了基于Web技术的电子病历系统的实现,对于我国进一步提高电子病历的信息化和共享医疗信息的建设具有一定借鉴意义。 相似文献
17.
18.
Adaptive real-time estimation of end-effector position and orientation using precise measurements of end-effector position 总被引:1,自引:0,他引:1
An adaptive estimation method is developed to generate real-time estimates of the position and orientation of the end-effector of an industrial robot and estimates of the root mean squared errors in these estimates, using real-time measurements of the position of a point on the end-effector, in addition to the usual measurements of the joint positions. To compensate for the lack of real-time measurements of the orientation of the end-effector, a Kalman filter is used to update a lookup table model of the kinematics of the robot that most affect the orientation of the end-effector. Measurements of the positions of a point on the end-effector collected during a short sequence of motions of the last axis of the robot are used by the Kalman filter to update this lookup table model. The updated lookup table model, together with real-time measurements of the position of a point on the end-effector and real-time measurements of the joint positions, is used by the estimator to compensate for the effects of geometric errors in the robot's structure and temperature variations on the position and orientation of the end-effector. In an application to a six-axis industrial robot, the adaptive estimation method is shown to substantially outperform the direct forward kinematics method whereby the position and orientation of the end-effector are estimated based upon joint position measurements alone. 相似文献
19.