Ultrasensitive flow injection chemiluminescence detection of DNA hybridization using signal DNA probe modified with Au and CuS nanoparticles

A novel and sensitive flow injection chemiluminescence assay for sequence-specific DNA detection based on signal amplification with nanoparticles (NPs) is reported in the present work. The "sandwich-type" DNA biosensor was fabricated with the thiol-functionalized capture DNA first immobilized on an Au electrode and hybridized with one end of target DNA, the other end of which was recognized with a signal DNA probe labeled with CuS NPs and Au NPs on the 3'- and 5'-terminus, respectively. The hybridization events were monitored by the CL intensity of luminol-H2O2-Cu(2+) after the cupric ions were dissolved from the hybrids. We demonstrated that the incorporation of Au NPs in this sensor design significantly enhanced the sensitivity and the selectivity because a single Au NP can be loaded with hundreds of signal DNA probe strands, which were modified with CuS NPs. The ratios of Au NPs, signal DNA probes, and CuS NPs modified on the gold electrode were approximately 1/101/103. A preconcentration process of cupric ions performed by anodic stripping voltammetry technology further increased the sensor performance. As a result of these two combined effects, this DNA sensor could detect as low as femtomolar target DNA and exhibited excellent selectivity against two-base mismatched DNA. Under the optimum conditions, the CL intensity was increased with the increase of the concentration of target DNA in the range of 2.0 x 10(-14)-2.0 x 10(-12) M. A detection limit of 4.8 x 10(-15) M target DNA was achieved.     

Determination of Cu2+ using poly(2-aminothiazole)/ multi-walled carbon nanotubes composite film modified glassy carbon electrodes

2-Aminothiazole was electropolymerized by cyclic voltammetry (CV) on the multi-walled carbon nanotubes (MWCNTs) modified glassy carbon electrode (GCE) surface. Poly(2-aminothiazole)/MWCNTs/GCE was used for determination of copper ions. The anodic peak currents of copper ions evaluated by differential pulse stripping voltammetry (DPSV) are linear with the concentrations in the range from 1.0 x 10(-7) M to 2.0 x 10(-5) M with a linear coefficiency of 0.9985. The detection limit is 2.0 x 10(-9) M calculated for a signal-to-noise ratio of 3 (S/N = 3). The proposed method was applied successfully to the determination of copper ions in drinking water, and the recovery was 96%.     

Copper(II) nanosensor based on a gold cysteamine self-assembled monolayer functionalized with salicylaldehyde

Fabrication and electrochemical characterization of a novel nanosensor for determination of Cu2+ in subnanomolar concentrations is described. The sensor is based on gold cysteamine self-assembled monolayer functionalized with salicylaldehyde by means of Schiff's base formation. Cyclic voltammetry, Electrochemical impedance spectroscopy (EIS), and electrochemical quartz crystal microbalance were used to probe the fabrication and characterization of the modified electrode. The sensor was used for quantitative determination of Cu2+ by the EIS in the presence of parabenzoquinone in comparison with stripping Osteryoung square wave voltammetry (OSWV). The attractive ability of the sensor to efficiently preconcentrate trace amounts of Cu2+ allowed a simple and reproducible method for copper determination. A wide range linear calibration curve was observed, 5.0 x 10(-11)-5.0 x 10(-6) and 5.0 x 10(-10)-5.0 x 10(-6) M Cu2+, by using the EIS and OSWV, respectively. Moreover, the sensor presented excellent stability with lower than 10% change in the response, as tested for more than three months daily experiments, and a high repeatability with relative standard deviations of 6.1 and 4.6% obtained for a series of eight successive measurements in 5.0 x 10(-7) M Cu2+ solution, by the EIS and OSWV, respectively.     

Optical-fiber copolymer-film electric-field sensor

Characteristics of a fiber-optic sensor for the detection of external electric fields are presented. This device utilizes a single-mode fiber that is embedded in a poled vinylidene fluoride-tetrafluoroethylene copolymer film and incorporated as the sensor arm of a Mach-Zehnder interferometer. A low-frequency intrinsic sensitivity of (0.20 +/- 0.03) x 10(-12) m/V is measured which compares well with our projected theoretical static sensitivity. This sensitivity implies a minimum detectable field of 33 microAV/m for a 1.0-km length of activated fiber and a 10(-7)-rad phase-shift detection capability.     

Copper ion-selective fluorescent sensor based on the inner filter effect using a spiropyran derivative

A highly selective copper(II) ion fluorescent sensor has been designed based on the UV-visible absorption of a spiropyran derivative coupled with the use of a metal porphyrin operative on the fluorescence inner filter effect. Spiropyrans, which combine the characteristics of metal binding and signal transduction, have been widely utilized in cationic ion recognition by UV-visible spectroscopy. In the present work, the viability of converting the absorption signal of the spiropyran molecule into a fluorescence signal was explored. On account of overlap of the absorption band of the spiropyran (lambda(abs) = 547 nm) in the presence of copper ion with the Q-band of an added fluorophore, zinc meso-tetraphenylporphyrin (lambda(abs) = 556 nm), the effective light absorbed by the porphyrin and concomitantly the emitted light intensity vary as a result of varying absorption of the spiropyran via fluorescence inner filter effect. The metal binding characteristic of the spiropyran presents an excellent selectivity for copper ion in comparison with several other heavy or transition metal ions. Since the changes in the absorbance of the absorber translate into exponential changes in fluorescence of the fluorophore, the novelty of the present device is that the analytical signal is more sensitive over that of the absorptiometry or that of the fluorometry using one single dye. To realize a practical fluorescent sensor, both the absorber and fluorophore were immobilized in a plasticized poly(vinyl chloride) membrane, and the sensing characteristics of the membrane for copper ion were investigated. The sensor is useful for measuring Cu2+ at concentrations ranging from 7.5 x 10(-7) to 3.6 x 10(-5) M with a detection limit of 1.5 x 10(-7) M. The sensor is chemically reversible, the fluorescence was switched off by immersing the membrane in copper ion solution and switched on by washing it with EDTA solution.     

Spectroelectrochemical sensing based on multimode selectivity simultaneously achievable in a single device. 16. Sensing by fluorescence

A fluorescence spectroelectrochemical sensor capable of detecting very low concentrations of metal complexes is described. The sensor is based on a novel spectroelectrochemical sensor that incorporates multiple internal reflection spectroscopy at an optically transparent electrode (OTE) coated with a selective film to enhance detection limits by preconcentrating the analyte at the OTE surface. Nafion was used as the selective cation exchange film for detecting Ru(bpy)(3)(2+), the model analyte, which fluoresces at 605 nm when excited with a 441.6-nm HeCd laser. The unoptimized linear dynamic range of the sensor for Ru(bpy)(3)(2+) is between 1 x 10(-)(11) and 1 x 10(-)(7) M with a calculated 2 x 10(-)(13) M detection limit. The sensor employs extremely thin films ( approximately 12 nm) without significantly sacrificing its sensitivity. The sensor response is demonstrated with varying film thicknesses. A state-of-the-art flow cell design allows variable cell volumes as low as approximately 4 microL. Fluorescence of the sample can be controlled by electromodulation between 0.7 and 1.3 V. Sensor operation is not reversible for the chosen model film (Nafion) and sample (Ru(bpy)(3)(2+)) but it can be regenerated with ethanol for multiple uses.     

Mixed ceria-based metal oxides biosensor for operation in oxygen restrictive environments

The unique catalytic, electrochemical, and oxygen storage properties of ceria and mixed ceria/titania hybrid composites were used to fabricate a new type of electrochemical enzyme biosensor. These materials provided increased analytical performance and possibilities for operation in oxygen-free conditions of an oxidase enzyme biosensor using tyrosinase as a model example. The investigation of the enzymatic reaction in the presence and absence of oxygen was first carried out using cyclic voltammetry. The results were used to identify the role of each metal oxide in the immobilization matrix and fabricate a simple amperometric tyrosinase biosensor for the detection of phenol and dopamine. The biosensor was optimized and characterized with respect to response time, detection limit, linear concentration range, sensitivity, and kinetic parameters. The detection limit for phenol was in the nanomolar range, with a detection limit of 9.0 x 10(-9) M and a sensitivity of 86 mA M(-1) in the presence of oxygen and of 5.6 x 10(-9) M and a sensitivity of 65 mA M(-1) in the absence of oxygen. The optimized biosensor also showed selective determination of the neurotransmitter dopamine with a detection limit of 3.4 x 10(-8) M and a sensitivity of 14.9 mA M(-1) in the presence of oxygen and of 4.2 x 10(-8) M and 14.8 mA M(-1) in the absence of oxygen. This strategy shows promise for increasing the sensitivity of oxidase enzyme sensors and provides opportunities for operation in oxygen limited conditions. It can also be extended for the development of other enzyme biosensors.     

Operation of a miniature redox hydrogel-based pyruvate sensor in undiluted deoxygenated calf serum

An amperometric sensor for the detection of pyruvate in biological fluids was formed by modifying the tip of a 0.25 mm gold wire with a layer of electrically "wired" recombinant pyruvate oxidase (POP). The sensor did not require O2 for its operation. The electroactive area of the tip of the microwire was increased by electrodeposition of platinum black. The POP was adsorbed on the platinum black and then "wired" with the cross-linked, subsequently deposited poly(4-vinylpyridine), part of the pyridine functions of which were complexed with [Os(bpy)2Cl](+/2+) and part quaternized with 2-bromoethylamine. In the resulting thin layer the POP was well "wired". When the electrode was poised at 0.4 V vs Ag/ AgCl, the sensitivity at pH 6 was 0.26 A cm(-2) M(-1) and the current increased linearly with the pyruvate concentration through the 2 x 10(-6) - 6 x 10(-4) M range. Thiamine diphosphate, flavin adenine dinucleotide, and MgCl2 were not required for the assay, but stabilized the stored enzyme electrode. Placement of a dialysis membrane (MWCO 3500) on the electrode alleviated the severe interference of ascorbate. In calf serum, the detection limit was 30 microM, suggesting that the electrode might be used in the continuous monitoring of pyruvate in hypoxic organs.     

A hydrogen peroxide biosensor based on peroxidase activity of hemoglobin in polymeric film

A Hydrogen peroxide (H2O2) biosensor, based on hemoglobin (Hb) and ortho-phenylenediamine (o-PD) gold electrode, was fabricated. Hb was immobilized onto the electrode surface by electrochemical polymerize method with o-PD. The designed biosensor showed a well defined redox peak which was attributed to the direct electrochemical response of Hb. The immobilized Hb exhibited an excellent electrocatalytical response to the reduction of hydrogen peroxide, enabling the sensitivity determination of H2O2. Factors and performances such as pH, potential, influencing the designed biosensor, were studied carefully. The amperometric detection of H2O2 was carried out at -300 mV in phosphate buffer solution (PBS) (0.1 M) with pH 6.0. This biosensor showed a fast amperometric response (less then 5 s) to H2O2. The levels of the (Relative standard deviation) RSDs (< 3.5%) for the entire analyses reflected a highly reproducible sensor performance. Using the optimized conditions, the detection limit of the biosensor was 1 x 10(-7) M and linear range was from 5 x 10(-6) to 1.25 x 10(-4) M. In addition, this sensor showed long-term stability and good sensitivity.     

Colorimetric determination of melamine by pyridine-3-boronic acid modified gold nanoparticles

A rapid, simple and sensitive colorimetric detection method for melamine was proposed based on pyridine-3-boronic acid (PBA) modified gold nanoparticles (AuNPs). The formation of supramolecular hydrogen-bonded structure between PBA and melamine resulted in the aggregation of PBA modified AuNPs and the color change from red to blue. Melamine could be detected by colorimetric response of AuNPs that could be detected by naked eyes or a UV-vis spectrophotometer. The detection concentration of melamine ranged from 6.0 x 10(-8) to 1.6 x 10(-6) M, and the detection limit (3sigma) was 3.0 x 10(-8) M (i.e., 3.2 ppb). This provided an effective and facile colorimetric sensor for real-time and on-site determination of melamine. Particularly, the proposed method could be used to detect melamine in pretreated liquid milk products with high sensitivity and low interference, and the recoveries were from 95% to 102%.     

Spectroelectrochemical sensing based on attenuated total internal reflectance stripping voltammetry. 1. Determination of lead and cadmium

The electrodeposition and subsequent stripping of lead and cadmium on an indium tin oxide (ITO) optically transparent electrode (OTE) were monitored by attenuated total internal reflectance. Light passing through the ITO-OTE is attenuated proportionally to the concentration of metal ion and deposition time. The wavelength dependence of the optical responses of deposited Pb and Cd was determined; optimal performance based on maximum sensor absorbance was at 750 nm for Pb and at 400 nm for Cd. Calibration curves were obtained over a range of 5 x 10(-8) to 5 x 10(-5) M and 1 x 10(-9) to 1 x 10(-5) M for Pb and Cd, respectively, using change in absorbance that accompanied deposition and subsequent stripping of the electrodeposited metal from the ITO.     

Computational approach to the rational design of molecularly imprinted polymers for voltammetric sensing of homovanillic acid

A methodology based on density functional theory calculations for the design of molecularly imprinted polymers (MIPs) is described. The method allows the rational choice of the most suitable monomer and polymerization solvent among a set of chemicals traditionally used in MIP formulations for the molecular imprinting of a given template. It is based on the comparison of the stabilization energies of the prepolymerization adducts between the template and different functional monomers. The effect of the polymerization solvent is included using the polarizable continuum model. A voltammetric sensor for homovanillic acid was constructed using different MIPs as recognition element, confirming that the solvent (toluene) and functional monomer (methacrylic acid) selected according to the theoretical predictions lead to the most efficient molecular recognition sensing phase. With the voltammetric sensor prepared using the MIP designed according to the theoretical predictions, a linear response for concentrations of homovanillic acid between 5 x 10(-8) and 1 x 10(-5) M can be obtained. The limit of detection is 7 x 10(-9) M. The selectivity obtained for homovanillic acid over other structurally related compounds buttresses the validity of this strategy of design.     

PVC-based 1,3,5-trithiane sensor for cerium(III) ions

A PVC membrane sensor for cerium(III) ions based on 1,3,5-trithiane as membrane carrier was prepared. The sensor has a linear dynamic range of 1.0 x 10(-1)-5.0 x 10(-5) M, with a Nernstian slope of 19.4+/-0.4 mV decade(-1), and a detection limit 3.0 x 10(-5) M. It has a fast response time of < 15 s and can be used for at least 5 months without any considerable divergence in potentials. The proposed sensor revealed comparatively good selectivities with respect to alkali, alkaline earth, and some transition and heavy metal ions and could be used in a pH range of 5.0-8.0. It was used as an indicator electrode in potentiometric titration of oxalate and fluoride ions and in determination of F- ion in some mouth wash preparations.     

Batch-type chemiluminescence detection cell for sensitization and simplification of capillary electrophoresis

A simple and convenient chemiluminescence detection cell was designed for capillary electrophoresis. The detection cell easily combined with capillary electrophoresis equipment. Luminol chemiluminescence was adapted for use with the detection cell. Detailed analysis and testing of the system revealed that luminol could be determined over a range of 2.5 x 10(-10)-6.5 x 10(-7) M (correlation coefficient, 0.999), with a detection limit (S/N = 3) of 2.5 x 10(-10) M (7 amol). Furthermore, each component in a mixture of glycine, glycylglycine, and glycylglycylgycine, which were labeled with isoluminol isothiocyanate, was baseline separated and sensitively detected. Moreover, the stacking procedure was applied to postcolumn detection in capillary electrophoresis. When acetonitrile stacking was used under certain conditions in the present system, chemiluminescence intensities of luminol and labeled compounds were about 1 order of magnitude higher than those obtained without stacking. The detection limit for luminol was 1.5 x 10(-11) M (S/N = 3), representing the highest sensitivity of luminol yet reported. Finally, the effect of p-iodophenol as an enhancer of luminol chemiluminescence was examined under weak alkaline conditions. The chemiluminescence intensity of luminol was approximately 2 orders of magnitude higher than that in the unenhanced reaction. A preliminary immunoassay using horseradish peroxidase-labeled anti-mouse IgG was also developed.     

An electrochemical metalloimmunoassay based on a colloidal gold label

A novel, sensitive electrochemical immunoassay has been developed using a colloidal gold label that, after oxidative gold metal dissolution in an acidic solution, was indirectly determined by anodic stripping voltammetry (ASV) at a single-use carbon-based screen-printed electrode (SPE). The use of disposable electrodes allows for simplified measurement in 35 microL of solution. The method was evaluated for a noncompetitive heterogeneous immunoassay of an immunoglobulin G (IgG) and a concentration as low as 3 x 10(-12) M was determined, which is competitive with colorimetric ELISA or with immunoassays based on fluorescent europium chelate labels. The high performance of the method is related to the sensitive ASV determination of gold(III) at a SPE (detection limit of 5 x 10(-9) M) and to the release of a large number of gold(III) ions from each gold particle anchored on the immunocomplex (e.g., 1.7 x 10(5) gold atoms are theoretically contained in a 18-nm spherical gold particle).     

Spectroelectrochemical sensing based on attenuated total internal reflectance stripping voltammetry. 3. Determination of cadmium and copper

The optical and electrochemical properties of metallic films on ITO surfaces resulting from deposition of copper and cadmium were monitored by stripping voltammetry-attenuated internal reflectance spectroscopy. The voltammetric or optical responses of both metals were examined with respect to solution conditions such as pH and presence of dissolved oxygen. The morphologies of these films were also examined using environmental scanning electron microscopy, and the microscopic electrodeposition patterns were found to influence the optical response. The wavelength dependence of the optical response of deposited copper was determined and compared with calculations; optimal performance was at 400 nm for copper. A linear calibration curve was obtained over a range of 1 x 10(-7)-1 x 10(-4) M for copper and compared with that of cadmium. The simultaneous determination of cadmium and copper was demonstrated, and the mechanism of co-deposition is discussed.     

Ion channel sensors for glutamic acid.

Coulometric biosensors using glutamate receptor (GluR) ion channel protein as a signal-amplifying sensory element that exploit the glutamate-triggered Na+ ion current through bilayer lipid membranes have been fabricated. The formation of stable planar bilayer lipid membranes was achieved by applying the folding method across a small circular aperture bored through a thin polyimide film. The multichannel type sensing membranes, formed across an aperture of ca. 120 microns diameter, contained more than 10 GluR proteins and showed L-glutamate-triggered response as a composite of individual single-channel currents. The single-channel type sensing membranes, formed across an aperture of ca. 20 microns diameter, contained a sufficiently small number of GluR proteins so that the response was observed as a series of single-channel pulse currents. Dependence of the integrated channel current on the glutamate concentration was examined. A sharp concentration dependence of up to ca. 1.5 x 10(-7) M and 3 x 10(-6) M for the multichannel and single-channel type sensors, respectively, was observed. A high selectivity for L-glutamate compared with D-glutamate for inducing the channel current was observed. A detection limit as low as ca. 3 x 10(-8) M was attained for the multichannel type sensor. This remarkable sensitivity is discussed in terms of the potential use of GluR ion channel protein for a new type of sensing system.     

A fast response cadmium-selective polymeric membrane electrode based on N,N'-(4-methyl-1,2-phenylene)diquinoline-2-carboxamide as a new neutral carrier

A new polyvinylchloride membrane sensor for Cd(2+) ions based on N,N'-(4-methyl-1,2-phenylene)diquinoline-2-carboxamide (Mebqb) as a new and excellent neutral ionophore has been prepared. The sensor shows a Nernestian response for cadmium ions over a wide concentration range (1.0 x 10(-6) to 1.0 x 10(-1) M) with the determination coefficient of 0.9964 and slope of 29.9 +/- 0.5 mV decade(-1). The limit of detection is 8 x 10(-7) M. It has a fast response time of 3-8s and can be used for at least 8 weeks without any divergence in potential. The electrode can be used in the pH range from 4.0 to 9.0. The proposed sensor shows a very good discriminating ability towards Cd(2+) ion in comparison to some alkali, alkaline earth, transition and heavy metal ions. It was successfully applied for the direct determination of Cd(2+) in standard and real sample solutions.     

A fiber-optic fluorescence sensor for lithium ion in acetonitrile

A novel fiber-optic fluorescence sensor based on a controlled-release reagent for the determination of lithium ion in organic solvents is proposed. The fluorogenic indicator 2-(2-hydroxyphenyl)benzoxazole is contained in a mini-polyethylene tube as the reagent reservoir and is brought into contact with the analyte solution by diffusion across a poly(vinyl chloride) (PVC) membrane to form a strongly fluorescent complex at the membrane/solution interface. The fluorescence signals produced are measured via two joined optical fibers positioned closely to the backside of the PVC membrane for light illumination and collection. The sensor is useful for measuring Li+ at concentrations in acetonitrile ranging from 1.0 x 10(-6) to 1.0 x 10(-2) M with a detection limit of 3.0 x 10(-7) M. The steady-state response can be reached within seconds, and the signal changes are fully reversible. The sensor shows minimal interference effects from other alkali metal and alkaline earth metal cations and has good stability and durability when stored in acetonitrile solutions.     

Nucleic acid-functionalized Pt nanoparticles: Catalytic labels for the amplified electrochemical detection of biomolecules

Nucleic acid-functionalized Pt nanoparticles (Pt-NPs) act as catalytic labels for the amplified electrochemical detection of DNA hybridization and aptamer/protein recognition. Hybridization of the nucleic acid-modified Pt-NPs with a sensing nucleic acid/analyte DNA complex associated with an electrode enables the amperometric, amplified, detection of the DNA by the Pt NP electrocatalyzed reduction of H2O2 (sensitivity limit, 1 x 10(-11) M). Similarly, the association of aptamer-functionalized Pt- NPs to a thrombin aptamer/thrombin complex associated with an electrode allowed the amplified, electrocatalytic detection of thrombin with a sensitivity limit corresponding to 1 x 10(-9) M.