Synthesis and characterization of crosslinkable latex with interpenetrating network structure based on polystyrene and polyacrylate

Functional poly[styrene‐co‐(2‐ethylhexyl acrylate)‐co‐(1,6‐hexanediol diacrylate)]/poly[(methyl methacrylate)‐co‐(butyl acrylate)‐co‐(methacrylic acid)‐co‐(diacetone acrylamide)] (PS/PA) semi‐interpenetrating polymer networks (semi‐LIPNs) containing ketone carboxyl groups were synthesized by two‐stage emulsion polymerization, and characterized by Fourier transform infrared, transmission electron microscopy, dynamic light scattering and DSC. A unique feature of the PS/PA semi‐LIPNs is their ability to crosslink and form thermosetting full‐IPN polymers through the reaction of ketone carboxyl and hydrazide in the course of film formation at ambient temperatures. Series of latex particles with various levels of crosslinking density in the PS and PA domain and varied composition of PS/PA LIPNs were obtained. The effects of the LIPN PS/PA composition and the level of crosslinking density in the PS and PA domain on film density, swell ratio, mechanical properties and contact angle with water were investigated. Maximum synergy effects obtained at around 50/50 (PS/PA) in terms of mechanical properties, density and contact angle with water indicate that the maximum degree of interpenetration is obtained at this composition. Copyright © 2006 Society of Chemical Industry     

Surface structure and properties of water‐based polymer coating materials prepared by the complexation of two polymer latices with chemically complementary structures

In this study, water‐based polymer coating materials used for the surface coating of substrates with lower surface energies were prepared by the complexation of two‐component polymer latices containing polydimethylsiloxane (PDMS) and having chemically complementary structures. The film‐forming performance of the polymer latices and the surface structures and properties of the coatings formed by the polymer latices were studied by means of scanning electron microscopy and by the measurement of mechanical strength, thermal performance, water absorbability, and contact angle. When the two‐component polymer latices [the poly(methyl methacrylate‐co‐butyl acrylate‐co‐methyl acrylic acid)/polydimethylsiloxane system (PA latex) and the poly(methyl methacrylate‐co‐butyl acrylate‐co‐pyrrolidone)/polydimethylsiloxane system (PB latex)] were compared, the complex polymer latex formed by the complexation of the PA latex with the PB latex had the best film‐forming performance, with formed coatings that were more smooth and had fewer less cracks. Also, compared to the two coatings formed by the two‐component polymer latices, the coatings formed by the complex polymer latex had a unique structure, a higher mechanical strength and elongation, a higher decomposing temperature, and better water resistance. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1748–1754, 2003     

Complexation of poly(dimethylsiloxane)/poly(methyl methacrylate‐co‐butyl acrylate‐co‐methacrylic acid) latex with poly(dimethylsiloxane)/poly(vinyl acetate‐co‐butyl acrylate) latex

Two latices—the poly(dimethylsiloxane) (PDMS)/poly(methyl methacrylate‐co‐butyl acrylate‐co‐methacrylic acid) system (PA latex) and the PDMS/poly(vinyl acetate‐co‐butyl acrylate) system (PB latex)—were prepared by seeded emulsion polymerization, and PA/PB complex latices were obtained through the interparticle complexation of the PA latex with the PB latex. In addition, for the further study of the interparticle complexation of the PA latex with the PB latex, copolymer latices [PDMS/methyl methacrylate‐co‐butyl acrylate‐co‐vinyl acetate‐co‐methacrylic acid) (PC)] were prepared according to the monomer recipe of the complex latices and the polymerization process of the component latices. The properties of the obtained polymer latices and complex latices were investigated with surface‐tension, contact‐angle, and viscosity measurements. The mechanical properties of the coatings obtained from the latices were investigated with tensile‐strength measurements. The results showed that, in comparison with the two component latices (PA latex and PB latex) and the corresponding copolymer latices (PC latices), the PA/PB complex latices had lower surface tension, lower viscosities, and better wettability to different substrates. The tensile strengths of the coatings obtained from the complex latices were higher than the tensile strengths of the coatings from the two component latices and copolymer latices. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2522–2527, 2004     

Morphologies of polybutylacrylate/poly(styrene‐co‐methyl methacrylate) latex prepared by starved emulsion polymerization Part I. Thermodynamics equilibrium morphology

Heterogeneous latexes were prepared by a semicontinuous seeded emulsion polymerization process under monomer starved conditions at 80 °C using potassium persulfate as the initiator and sodium dodecyl sulfate as the emulsifier. Poly(butyl acrylate) latexes were used as seeds. The second‐stage polymer was poly(styrene‐co‐methyl methacrylate). By varying the amounts of methyl methacrylate (MMA) in the second‐stage copolymer, the polarity of the copolymer phase could be controlled. Phase separation towards the thermodynamic equilibrium morphology was accelerated either by ageing the composite latex at 80 °C or by adding a chain‐transfer agent during polymerization. The morphologies of the latex particles were examined by transmission electron microscopy (TEM). The morphology distributions of latex particles were described by a statistical method. It was found that the latex particles displayed different equilibrium morphologies depending on the composition of the second‐stage copolymers. This series of equilibrium morphologies of [poly(butyl acrylate)/poly(styrene‐co‐methyl methacrylate)] (PBA/P(St‐co‐MMA)) system provides experimental verification for quantitative simulation. Under limiting conditions, the equilibrium morphologies of PBA/P(St‐co‐MMA) were predicted according to the minimum surface free energy change principle. The particle morphology observed by TEM was in good agreement with the predictions of the thermodynamic model. Therefore, the morphology theory for homopolymer/homopolymer composite systems was extended to homopolymer/copolymer systems. © 2002 Society of Chemical Industry     

Thermal and sonochemical degradation kinetics of poly(n‐butyl methacrylate‐co‐alkyl acrylates): Variation of chain strength and stability with copolymer composition

The thermal degradation of poly(n‐butyl methacrylate‐co‐alkyl acrylate) was compared with ultrasonic degradation. For this purpose, different compositions of poly (n‐butyl methacrylate‐co‐methyl acrylate) (PBMAMA) and a particular composition of poly(n‐butyl methacrylate‐co‐ethyl acrylate) (PBMAEA) and poly(n‐butyl methacrylate‐co‐butyl acrylate) (PBMABA) were synthesized and characterized. The thermal degradation of polymers shows that the poly(alkyl acrylates) degrade in a single stage by random chain scission and poly(n‐butyl methacrylate) degrades in two stages. The number of stages of thermal degradation of copolymers was same as the majority component of the copolymer. The activation energy corresponding to random chain scission increased and then decreased with an increase of n‐butyl methacrylate fraction in copolymer. The effect of methyl acrylate content, alkyl acrylate substituent, and solvents on the ultrasonic degradation of these copolymers was investigated. A continuous distribution kinetics model was used to determine the degradation rate coefficients. The degradation rate coefficient of PBMAMA varied nonlinearly with n‐butyl methacrylate content. The degradation of poly (n‐butyl methacrylate‐co‐alkyl acrylate) followed the order: PBMAMA < PBMAEA < PBMABA. The variation in the degradation rate constant with composition of the copolymer was discussed in relation to the competing effects of the stretching of the polymer in solution and the electron displacement in the main chain. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Effect of crosslinker,buffer, and blending on damping properties of poly(styrene‐acrylonitrile)/poly(ethyl acrylate‐ n‐butyl acrylate) latex interpenetrating polymer networks

A series of poly(styrene‐acrylonitrile)/poly(ethyl acrylate‐n‐butyl acrylate) latex interpenetrating polymer networks (LIPNs) are synthesized by changing the kind of crosslinker and introducing a buffer. The results show that the crosslinker has an important effect on the damping properties of the LIPNs; divinylbenzene is the best crosslinker in the study. Moreover, introducing a buffer into LIPNs leads to an increase of the damping values over the temperature range where the damping value surpasses 0.5. The LIPN blend prepared by mixing LIPNs results in broadening of the damping peak, therefore improving the damping properties. Tests of the damping properties show that the LIPNs have good practical value. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2347–2351, 2002     

Morphologies and dynamic mechanical properties of core‐shell emulsifier‐free latexes and their copolymers for P(BA/MMA)/P(MMA/BA) and P(BA/MMA)/PSt systems in the presence of AHPS

Different poly(methyl methacrylate/n‐butyl acrylate)/poly(n‐butyl acrylate/methyl methacrylate) [P(BA/MMA)/P(MMA/BA)] and poly(n‐butyl acrylate/methyl methacrylate)/polystyrene [P(BA/MMA)/PSt] core‐shell structured latexes were prepared by emulsifier‐free emulsion polymerization in the presence of hydrophilic monomer 3‐allyloxy‐2‐hydroxyl‐propanesulfonic salt (AHPS). The particle morphologies of the final latexes and dynamic mechanical properties of the copolymers from final latexes were investigated in detail. With the addition of AHPS, a latex of stable and high‐solid content (60 wt %) was prepared. The diameters of the latex particles are ～0.26 μm for the P(BA/MMA)/P(MMA/BA) system and 0.22–0.24 μm for the P(BA/MMA)/PSt system. All copolymers from the final latexes are two‐phase structure polymers, shown as two glass transition temperatures (T_gs) on dynamic mechanical analysis spectra. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3078–3084, 2002     

Dynamic‐mechanical behavior of hydrophobic–hydrophilic interpenetrating copolymer networks

Sequential interpenetrating polymer networks (IPNs) were prepared by free‐radical polymerization. One of the components of the IPN was a poly(butyl acrylate) (PBA) network, and the other one was a poly(methyl methacrylate‐co‐hydroxyethyl methacrylate) copolymer network. Dynamic‐mechanical experiments show that the IPNs are phase separated: two main α relaxations occur in all samples, the low temperature one corresponding to the PBA network and that appearing at higher temperature due to the copolymer network. The latter shows a shape analogous to a pure poly(hydroxyethyl methacrylate) (PHEMA) network independently of the copolymer composition. The influence of water absorption on the dynamic‐mechanical spectrum shows that only a small amount of water reaches the butyl acrylate segments. The dependence of the mechanical behavior of the poly(methyl methacrylate‐co‐hydroxyethyl methacrylate) copolymer networks with the copolymer composition has been also analyzed. POLYM. ENG. SCI., 46:930–937, 2006. © 2006 Society of Plastics Engineers     

Studies on the polyblends of poly(vinyl chloride) with various methacrylate copolymers,melt rheological properties. II

Studies have been made on the melt rheological properties of poly(vinyl chloride) (PVC) with copolymers of methyl methacrylate (MMA) and methyl acrylate (MA), ethyl acrylate (EA), butyl acrylate (BA), and 2-ethyl hexyl acrylate (EHA) at a blending ratio of 80:20. Effect of blend composition on shear stress–shear rate, melt viscosity, melt elasticity, and extrudate distortion have been studied. A significant decrease in the melt viscosity is observed on incorporation of low T_g, acrylate copolymers such as those with BA and EHA, thereby reducing the processing temperature. First normal stress and die swell ratio also decreases with an increase in the side chains of acrylate copolymer. PVC blended with P(MMA-co-BA) and P(MMA-co-EHA) is sensitive to both temperature and shear stress.     

Studies on damping properties of P(MMA‐AN)/P(EA‐nBA) LIPNs

Using a two‐stage emulsion polymerization method, a series of poly(methyl methacrylate‐acrylonitrile)/poly(ethyl acrylate‐n‐butyl acrylate) [P(MMA‐AN)/P(EA‐nBA)] latex interpenetrating polymer networks (LIPNs) were synthesized by varying AN content, ratio of network I/network II, crosslinker content, and introducing chain transfer agent. The damping properties of the LIPNs were investigated using a Rheovibron Viscoelastometer. The results indicates that a suitable content of AN can improve the damping properties of the LIPNs. Three kinds of fillers were incorporated into the LPINs, respectively, to measure the change in the damping properties. Mica and TiO₂ both increased the damping properties of the LIPNs over the wide temperature range. For TiO₂‐filled LIPNs, it was observed that the tan δ values exceeded 0.4 over 112.6°C temperature range from −50 to 72.6°C. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 722–727, 2000     

Preparation and characterization of poly(butyl acrylate‐co‐2‐ethylhexyl acrylate) grafting of vinyl chloride resin with good impact resistance

Crosslinked poly(butyl acrylate‐co‐2‐ethylhexyl acrylate) [P(BA–EHA)] latex was synthesized by seeded emulsion polymerization. P(BA–EHA)/poly(vinyl chloride) (PVC) composite latex was prepared using P(BA–EHA) latex as the seed. The effects of the amount of P(BA–EHA) on the latex particle diameters and mechanical properties of the materials are discussed. The grafting efficiency (GE) of P(BA–EHA)‐grafted vinyl chloride (VC) in the synthesized resin was investigated, and the GE increased with an increasing P(BA–EHA)/VC ratio. The morphology of P(BA–EHA)/PVC was characterized using TEM, SEM, and DMA. TEM indicated that the particles of the P(BA–EHA)/PVC composite latex have a clear core–shell structure. DMA illustrated that the compatibility between P(BA–EHA) and PVC was well improved. With an increasing P(BA–EHA) content, the loss peak in the low‐temperature range became stronger than that of pure PVC, and the maximum values of the loss peaks gradually shifted to higher temperature. SEM showed that the fractured surface of the composite sample exhibited better toughness of the material. The notched impact strength of the material with 4.2 wt % P(BA–EHA) was 11 times that of PVC. TEM showed that P(BA–EHA) was uniformly dispersed in the PVC matrix and that the interface between the two phases was indistinct. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 643–649, 2003     

Synthesis,characterization, and thermal behavior study of methyl methacrylate polymers containing 4‐carbazole substitutes

A new polymerizable monomer, [4‐(9‐ethyl)carbazolyl]methyl methacrylate ( 2 ), was synthesized by reacting of methacrylic acid and 4‐hydroxymethyl‐9‐ethyl carbazole ( 1 ) by esterification procedure in the presence of N,N′‐dicyclohexylcarbodiimide. The resulting monomer was then polymerized free‐radically to form the poly(methyl methacrylate) containing 4‐(9‐ethyl)carbazolyl pend ent groups. Also, copolymerization of monomer 2 with various acrylic monomers such as methyl methacrylate, ethyl methacrylate, methyl acrylate, ethyl acrylate, and n‐butyl acrylate by azobisisobutyronitrile as a free radical polymerization initiator gave the related copolymers in high yields. The structure of all the resulted compounds was characterized and confirmed by FTIR and ¹H NMR spectroscopic techniques. The average molecular weight of the obtained polymers was determined by gel permeation chromatography using tetrahydrofurane as the solvent. The thermal gravimetric analysis and differential scanning calorimeter instruments were used for studying of thermal properties of polymers. It was found that, with the incorporation of bulky 4‐(9‐ethyl)carbazolyl substitutes in side chains of methyl methacrylate polymers, thermal stability and glass transition temperature of polymers are increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4989–4995, 2006     

Control of monodisperse particle size of styrenic–acrylate copolymers in dispersion copolymerization

Syntheses of monodisperse poly[(styrene)‐co‐(n‐butyl acrylate)] and poly[(styrene)‐co‐(2‐ethylhexyl acrylate)] were carried out by dispersion polymerization. The reactions were performed in the mixed solvent of ethanol–water in the presence of azo‐bisisobutyronitrile and poly(N‐vinylpyrrolidone) as the initiator and dispersant, respectively. The effects of reaction parameters, that is the type and concentration of dispersant, ratio of the mixed solvent, reaction temperature, agitation rate, monomer composition between styrene and n‐butyl acrylate or 2‐ethylhexyl acrylate, crosslinking agent and reaction time on the particle size, size distribution and average molecular weights of the resulting copolymer were thoroughly investigated. The resulting copolymer particles were smooth on their spherical surface and the sizes were in the range 0.6–1.8 µm with a narrow size distribution. In most cases, a correlation between small particle sizes with high average molecular weights was observed. The average particle size generally increased with increasing reaction temperature, time and acrylate monomer content. In contrast, the particle size decreased as the molecular weight, concentration of dispersant, polarity of the medium or agitation rate was increased. The glass transition temperature (T_g) of the copolymers can be controlled by the mole ratio of the comonomer. The T_g values decreased when the content of acrylate monomers in the copolymer increased, and T_g values of the synthesized copolymer were in the range 66–102 °C. Instead of using n‐butyl acrylate monomer in the copolymerization, 2‐ethylhexyl acrylate copolymerization with styrene resulted in insignificant changes in the particle sizes but there were significant decreases in T_g values. In this study, the monodisperse particles can be obtained by monitoring the appropriate conditions regarding PVP K‐30 (2–8 wt%), ethanol/water (90/10 wt%), the reaction temperature (70 °C) and the agitation rate (100 rpm). © 2000 Society of Chemical Industry     

Preparation of porous polymer materials using water‐in‐oil gel emulsions as templates

Water‐in‐oil gel emulsions consisting of water and n‐butyl acrylate were successfully prepared using N‐3‐hydroxybutylcarbonyl‐l ‐isoleucylaminooctadecane and sorbitan monooleate (Span 80) as gelator and surfactant, respectively. Stable gel emulsions were formed using aqueous phase fractions (APFs) ranging from 10 to 90 vol%. Creaming, flocculation and coalescence were not observed. Low‐temperature polymerization of the gel emulsions with a redox initiator gave the corresponding low‐density, highly porous poly(n‐butyl acrylate)s (PBAs). The microstructures of the PBAs were observed using scanning electron microscopy. All the porous PBAs comprised numerous spherical structures whose sizes could be controlled by adjusting the gel emulsion APF. The densities and porosities of the porous PBAs decreased and increased, respectively, with increasing APF. The absorption capacities of the porous PBAs in organic solvents were studied. The porous PBAs selectively absorbed kerosene from water instantly and the kerosene could then be recovered by physical compression of the PBAs. Further porous polymers were prepared from gel emulsions containing styrene, methyl methacrylate (MMA) or 2‐ethylhexyl acrylate (EHA) as continuous oil phases. The order of absorption capacity and swelling ratio in kerosene was poly(EHA) > PBA ? poly(MMA). Porous copolymers were also prepared from gel emulsions containing a mixture of EHA and MMA as the oil phase. Their absorption and swelling in liquids could be controlled by changing the ratio of EHA and MMA in the gel emulsions. poly(EHA‐co‐MMA) (6:4) was the best polymer when absorption capacity, swelling ratio and durability were simultaneously considered. © 2018 Society of Chemical Industry     

Effects of compatibilizer type and rubber‐wood sawdust content on the mechanical,morphological, and thermal properties of PVC/LDPE blend

This article aimed to investigate the mechanical, morphological and thermal properties of PVC/LDPE blend with and without the addition of compatibilizers. The effects of LDPE content, compatibilizer type and rubber‐wood sawdust loading on the properties of the blend were evaluated. The experimental results suggested that as the LDPE content was increased the mechanical properties of PVC‐LDPE blend progressively decreased due to poor interfacial adhesion. The continuity and compatibility between PVC and LDPE phases could be improved through three different types of compatibilizers which included chlorinated polyethylene (CPE) poly(methyl‐methacrylate‐co‐butyl acrylate) (PA20) and poly(ethylene‐co‐methacrylate) (Elvaloy). The PA20 was found to be the most suitable compatibilizer for the blend. A radical transfer reaction was proposed in this work to explain the structure and thermal changes of the PVC in PVC‐LDPE blend. The decomposition temperature of PVC in the blend decreased with the loading of the PA20 and the wood sawdust. As the sawdust content was increased the tensile and flexural moduli increased with considerable decreased in the tensile, flexural and impact strength, a slight improvement being achieved if the PA20 was incorporated in the composite. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 598–606, 2006     

Synthesis of an acrylate elastomer with UV stabilization and its application in polyoxymethylene

In this study, an acrylate elastomer with light‐stable functional groups was synthesized by methyl methacrylate (MMA), butyl acrylate (BA), and a polymerizable UV stabilizer 2‐hydroxy‐4‐(3‐methacryloxy‐2‐hydroxylproroxy) benzophenone (BPMA) via emulsion polymerization, and the product was poly[methyl methacrylate‐co‐butyl acrylate‐co‐2‐hydroxy‐4‐(3‐methacryloxy‐2‐hydroxylproroxy) benzophenone] [poly(MMA‐co‐BA‐co‐BPMA)]. The composition and characteristics of poly (MMA‐co‐BA‐co‐BPMA) were determined by using Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H‐NMR), and ultraviolet–visible absorption spectroscopy (UV–vis). Further, the obtained poly(MMA‐co‐BA‐co‐BPMA) was blended with polyoxymethylene (POM) to modify its photostabilization, as well as the mechanical properties of POM composite were tested before and after UV irradiation. The result showed that poly(MMA‐co‐BA‐co‐BPMA) can be dispersed well in the POM matrix, which could play a role of improving compatibility with and toughening for POM, and its light‐stable functional groups could increase the UV resistance of POM composite. Mechanical properties of modified POM were kept well with higher impact strength and elongation at break than pure POM after UV irradiation. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis of well‐defined,functionalized polymer latex particles through semicontinuous emulsion polymerization processes

The design of a semicontinuous emulsion polymerization process, primarily based on theoretical calculations, has been carried out with the objective of achieving overall independent control over the latex particle size, the monodispersity in the particle size distribution, the homogeneous copolymer composition, the concentration of functional groups (e.g., carboxyl groups), and the glass‐transition temperature with n‐butyl methacrylate/n‐butyl acrylate/methacrylic acid as a model system. The surfactant coverage on the latex particles is very important for maintaining a constant particle number throughout the feed process, and this results in the formation of monodisperse latex particles. A model has been set up to calculate the surfactant coverage from the monomer feed rate, surfactant feed rate, desired solid content, and particle size. This model also leads to an equation correlating the polymerization rate to the instantaneous conversion of the monomer or comonomer mixture. This equation can be used to determine the maximum polymerization rate, only below or at which monomer‐starved conditions can be achieved. The maximum polymerization rate provides guidance for selecting the monomer feed rate in the semicontinuous emulsion polymerization process. The glass‐transition temperature of the resulting carboxylated poly(n‐butyl methacrylate‐co‐n‐butyl acrylate) copolymer can be adjusted through variations in the compositions of the copolymers with the linear Pochan equation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 30–41, 2003     

Enhancement of the actuation performance of dielectric triblock copolymers modified with additives

To enhance actuation performance without prestrain, an elastomeric acrylic triblock copolymer, poly(methyl methacrylate)‐block‐poly(n‐butyl acrylate)‐block‐poly(methyl methacrylate), was modified with two kinds of additives, oligomeric poly(n‐butyl acrylate) and the plasticizer dibutyl sebacate. An actuator modified with those additives showed about 6% strain, whereas the unmodified actuator showed only 1% strain for the same applied electric field without prestrain. In addition, actuation was attained at lower critical electric field strength (625 and 1000 V mm^?1 for modified and unmodified actuators, respectively). Upon increasing the amounts of the additives, the electrically induced actuation velocity and degree of deformation increased. These results are explained by the dielectric and mechanical properties of the elastomers. The dielectric constants for elastomers modified with dibutyl sebacate were larger than those for elastomers modified with oligomeric poly(n‐butyl acrylate). The initial tensile stresses of both of the modified elastomers were much smaller than that of unmodified elastomer. The results provide a route to enhancing actuation performance of dielectric elastomers without prestrain. Copyright © 2011 Society of Chemical Industry     

Effects of poly(methyl methacrylate)‐based low‐profile additives on the properties of cured unsaturated polyester resins. II. Volume shrinkage characteristics and internal pigmentability

The effects of three series of self‐synthesized poly(methyl methacrylate) (PMMA)‐based low‐profile additives (LPAs), including PMMA, poly(methyl methacrylate‐co‐butyl acrylate), and poly(methyl methacrylate‐co‐butyl acrylate‐co‐maleic anhydride) with different chemical structures and MWs on the volume shrinkage characteristics and internal pigmentability for low‐shrink unsaturated polyester (UP) resins during curing were investigated by an integrated approach of static phase characteristics of the ternary styrene (ST)/UP/LPA system, reaction kinetics, cured‐sample morphology, microvoid formation, and property measurements. The relative volume fraction of microvoids generated during the cure was controlled by the stiffness of the UP resin used, the compatibility of the uncured ST/UP/LPA systems, and the glass‐transition temperature of the LPAs used. On the basis of the Takayanagi mechanical model, the LPA mechanism on volume shrinkage control, which accounted for phase separation and microvoid formation, and factors leading to both a good volume shrinkage control and acceptable internal pigmentability for the molded parts are discussed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3388–3397, 2004     

Morphology of poly(butyl acrylate)/poly(styrene‐co‐methyl methacrylate) latex prepared by starved emulsion polymerization: II. Development of particle morphology

Heterogeneous latexes were prepared by a two‐stage seeded emulsion polymerization process under monomer starved conditions at 80 °C using potassium persulfate as the initiator and sodium dodecyl sulfate as the emulsifier. Poly(butyl acrylate) latexes were used as seeds. The second‐stage polymer was poly(styrene‐co‐methyl methacrylate). By varying the amount of methyl methacrylate (MMA) in the second‐stage copolymer, the polarity of the copolymer phase could be controlled. It was found that the latex particles displayed different morphologies depending on the monomer ratio. The amount of MMA had a significant effect on the evolution of morphology. The morphologies were observed by transmission electron microscopy. In addition, the evolution of the particle morphology was predicted by the mathmatical model for cluster migration. The model gave the same trends as the experimental results. © 2002 Society of Chemical Industry