Graft copolymerization of acrylic acid on methylcellulose by ceric ion/p‐xylene redox pair

The graft copolymerization of acrylic acid onto methylcellulose by ceric ion/p‐xylene redox pair was investigated in aqueous media under homogeneous conditions. The graft yield dependency on p‐xylene concentration in the range 1.8–45.0 × 10^?5M showed a minimum and an enhanced yield when the methylcellulose interacted with ceric ion and p‐xylene for an initial period of 10 min (preoxidation time) prior to addition of monomer to the reaction medium. This was attributed to the presence of two kinetically controlled reactions initiated by p‐xylyl radical and diradical species. At prolonged preoxidation times of 30 and 60 min, the graft yield dependency on p‐xylene concentration was normal and suggested the presence of only one initiating species. The effect of ceric ion on the graft reaction in the concentration range of 8.33–83.3 × 10^?3M was optimal at 131% graft yield for ceric ion concentration of 16.7 × 10^?3M and was reduced significantly by as much as 75% at the highest concentration of the latter. The temperature dependency of graft yield was negative in the region 30–50°C. At 50°C the initial rate of graft was only 37% of the value at 30°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 500–504, 2002; DOI 10.1002/app.10200     

Grafting vinyl monomers onto silk fibers. VIII. Graft copolymerization of methyl methacrylate onto silk using tetravalent manganese–oxalic acid redox system

The graft copolymerization of methyl methacrylate onto silk fibers was investigated in aqueous solution using the Mn(IV)–oxalic acid redox system. The copolymerization reaction was carried out under a variety of conditions such as different monomer, initiator, oxalic acid, acid concentrations, and temperatures. The graft yield increases with increasing initiator concentration up to 5 × 10^?2M, and with further increase of the initiator concentration it decreases. The graft yield also increases with increasing sulfuric acid concentration up to 15 × 10^?2M, and decreases thereafter. The rate of grafting also increases with increase in oxalic acid concentration up to 1.5 × 10^?2M and 84.592 × 10^?2M, respectively, and thereafter the rate of grafting shows down. The effect of temperature, solvents, and salts on graft yield has also been investigated and a plausible rate expression has been derived.     

Graft copolymerization of acrylic acid onto cocoyam starch by ceric ion in the presence of N,N′‐dimethylacetamide

Grafting of acrylic acid onto cocoyam starch, Xanthosoma sagittitolium was initiated by ceric ion—N,N′‐dimethylacetamide redox pair in aqueous media. The reaction was characterized by high graft yields of up to 676%, and infrared spectroscopy affirmed the presence of grafted polymer. Graft yield was enhanced by N,N′‐dimethylacetamide (DMAc) in the concentration range, 9.0–36.0 × 10^?4M but lower concentrations were more favorable with the ratio of percentage graft, P_g/P_g0, in the presence and absence of DMAc respectively, of up to 1.34 at 9.0 × 10^?4M of the latter. Ceric ion was nonterminating of the graft reaction and a 10‐fold increase in its concentration of 4.16 × 10^?3M resulted in high efficiency of graft of 50.2% in monomer conversion to grafted polymer. Enhanced homopolymer formation and low efficiency of graft were observed at monomer concentration greater than 0.69M. Long reaction time, greater than 30 min, was unfavorable to the graft reaction and the latter showed negative dependence on temperature in the range, 30–50°C. At 30‐min reaction time, the graft yield at 50°C was not more than 70% of the corresponding value at 30°C. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Grafting of acrylonitrile onto allylated caesarweed fibers by potassium permanganate – N,N′‐dimethylacetamide redox pair

Caesarweed fiber, Urena lobata, was modified by successive treatment with sodium hydroxide and allylchloride in diethylether to yield an average degree of substitution of 2.73 allyl moieties per anhydroglucose unit. The presence of allyl moieties on the fiber was confirmed by infrared spectroscopy. Graft copolymerization of acrylonitrile onto the unmodified and allyl‐modified fibers was initiated by potassium permanganate –N,N′‐dimethylacetamide redox pair in aqueous medium. The allyl fiber was markedly less reactive than the unmodified fiber with graft yields for the latter a factor of 2.3 higher than those of the former. This was attributed to resonance stabilization of allylic macroradicals of the fiber. The graft yield showed positive dependence on N,N′‐dimethylacetamide concentration in the range, 9.0–45.0 × 10^?4M with P_g/P_go of up to 1.39 at the highest concentration. The conversion in graft yield was however characterized by a plateau at the latter concentration and was ascribed to termination of grafted polymer chains by methylacetylaminomethyl radical initiating species. Spectroscopic evidence in support of the latter was the absorption peak at 1680 cm^?1 for the graft copolymers, characteristic of C?O stretching vibration for tertiary amide. Acetic acid, at concentrations in the range 0.28–2.22M, was inimical to grafting of acrylonitrile onto allylfibre with P_g/P_go, of less than one. Grafting onto allylfiber showed positive temperature dependence in the range, 30–50°C with calculated activation energy of 12.3 kcal mol^?1 for the graft polymerization reaction. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A study toward the physicochemical properties of graft copolymer (partially carboxymethylated guar gum‐g‐N,N′‐dimethylacrylamide): Synthesis and characterization

Unreported graft copolymer of N,N′‐dimethylacrylamide (DMA) with partially carboxymethylated guar gum (CmgOH) has been synthesized and the reaction conditions have been optimized for affording maximum grafting using a potassium peroxymonosulphate (PMS)/thiourea (TU) redox initiators under nitrogen atmosphere. The study of graft copolymerization has been performed to observe maximum value of grafting parameters except percentage of homopolymer by varying the concentrations of DMA, PMS, and TU. The grafting parameters increase continuously on increasing the concentration of DMA from 8 × 10^?2 to 24 × 10^?2 mol dm^?3, PMS from 5 × 10^?3 to 21 × 10^?3 mol dm^?3, and TU from 1.6 × 10^?3 to 4.8 × 10^?3 mol dm^?3. The optimum temperature and time for grafting of DMA onto CmgOH were found to be 35°C and 120 min, respectively. The water‐swelling capacity of graft copolymer is investigated. Flocculation property for both coking and noncoking coals is studied for the treatment of coal mine waste water. The graft copolymer is characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

One pot synthesis of xanthan gum‐g‐N‐vinyl‐2‐pyrrolidone and study of their metal ion sorption behavior and water swelling property

In this article, graft copolymerization of N‐vinyl‐2‐pyrrolidone onto xanthan gum initiated by potassium peroxydiphosphate/Ag⁺ system in an aqueous medium has been studied under oxygen free nitrogen atmosphere. Grafting ratio, grafting efficiency, and add on increase on increasing the concentration of potassium peroxydiphosphate (2.0 × 10^?3 to 12 × 10^?3 mol dm^?3), Ag⁺(0.4 × 10^?3 to 2.8 × 10^?3 mol dm^?3), and hydrogen ion concentration from 2 × 10^?3 to 14.0 × 10^?3 mol dm^?3. Maximum grafting has been obtained when xanthan gum and monomer concentration were 0.4 g dm^?3 and 16 × 10^?2 mol dm^?3, respectively, at 35°C and 120 min. Water swelling capacity, swelling ratio, metal ion uptake, and metal retention capacity have also been studied, and it has been found that graft copolymer shows enhancement in these properties than pure xanthan gum. The graft copolymer has been characterized by FTIR and thermal analysis. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Graft copolymerization with new class of acidic peroxo salts as initiators. I. Grafting of acrylamide onto cotton–cellulose using potassium monopersulfate,catalyzed by co(II)

Graft copolymerization of acrylamide (AM) onto cotton–cellulose has been studied using a new class of acidic peroxo-salt “potassium monopersulfate” as initiator catalyzed by Co(II). It is observed that the graft yield is influenced by the reaction time, temperature, and concentrations of the monomer, catalyst, initiator, at fixed weight of the polymer. Maximum graft yield (30.8%) is obtained at 40°C under nitrogen atmosphere for the concentrations of monomer 1.2M; initiator 4.83 × 10^?3M; Co(II) 5 × 10^?4M for 4 h of reaction time. The graft copolymers after proper purification have been subjected to IR analysis, testing of their water-retention properties, rot resistance, tensile properties, and behavior towards acids and alkalies. The results of such analysis are compared with the base. Suitable mechanism for the graft copolymerization is suggested and grafting rate has been evaluated.     

Graft copolymerization of acrylonitrile onto allylated caesarweed fibres by ceric ion in the presence of 2‐mercaptoethanol

Polyacrylonitrile was grafted onto caesarweed fibers and on the allyldervative in aqueous media by ceric ion‐2‐mercaptoethanol redox pair. The allylfibre was obtained by treatment of caesarweed fibers with sodium hydroxide followed by allylchloride in diisoproylether to yield an average degree of substitution of 3.24 allyl moieties per anhydroglucose unit (AGU). The graft yield dependence on 2‐mercaptoethanol concentration, in the range, 10.7–64.0 × 10^?4M was characterized by a minimum followed by an enhanced yield. This suggested the existence of two initiating species, a thioglycol radical and mercaptoethoxyl radical. A fivefold increase in the concentration of 2‐mercaptoethanol was accompanied by reduction in the frequency of graft, F_g from 75.6–0.79 Ng/10⁴ AGU and a concomitant increase, by two orders of magnitude, in the average molecular weight of grafted polymer M_v, with values of up to 11.78 × 10⁵. Infrared spectroscopy of allylfibre‐g‐polyacrylonitrile copolymer showed evidence of radical coupling reaction involving thioglycol radical species and allylic macroradicals of the allylfibre. The unmodified fiber was more reactive than the allylfibre by as much as a factor of 2, and was ascribed to resonance stabilization of allylic macro radicals derived from the latter. For the allyl fiber, a 150% increase in monomer concentration resulted in nominal increase in graft yield, not higher than 7%. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Graft copolymerization of methyl methacrylate onto gelatin using KMnO4‐H2SO4 redox system

The graft copolymerization of methyl methacrylate onto gelatin was studied using KMnO₄‐H₂SO₄ redox system. The maximum graft yield of 64.5% was obtained at the potassium permanganate concentration of 2.00 × 10^?3 mol/L and the optimum temperature of 50°C. Activation energy was calculated as 18.6 kcal/mol at the temperature interval of 40–70°C. The results of the thermogravimetric analysis showed that the degradation temperature of gelatin increased as a result of grafting. Moreover, some changes in the properties of methyl methacrylate‐grafted samples were also observed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2836–2844, 2003     

Grafting vinyl monomers onto polyester fibers. VI. Graft copolymerization of methyl methacrylate onto PET fibers using tetravalent cerium as initiator

The graft copolymerization of methyl methacrylate onto polyester fibers (PET) was investigated using tetravalent cerium as the initiator. The rate of grafting was found to increase progressively with the initiator and monomer concentrations up to 2.5 × 10^?2M and 70.41 × 10^?2M, respectively. The reaction was found to be catalysed by acid up to 15.0 × 10^?2M. The graft yield increased by increasing temperature. The effect of addition of some solvents and thiourea on the rate of grafting was also investigated. A suitable kinetic scheme has been pictured, and rate equations have been derived.     

Phase‐transfer‐agent‐aided polymerization and graft copolymerization of acrylamide

The use of phase‐transfer catalysts, with water‐insoluble initiators, for polymerization and graft copolymerization reactions was explored. The polymerization of a water‐soluble vinyl monomer, acrylamide (AAm), and the graft copolymerization of AAm onto a water‐insoluble polymer backbone, isotactic polypropylene (IPP), with a water‐insoluble initiator, benzoyl peroxide (BPO), and a phase‐transfer catalyst, tetrabutyl ammonium bromide (Bu₄N⁺Br^?), were carried out in a water/xylene binary solvent system. The conversion percentage of AAm into polyacrylamide (PAAm) and the percentage of grafting of AAm onto IPP were determined as functions of various reaction parameters, such as the BPO, AAm, and phase‐transfer‐catalyst concentrations, the amounts of water and xylene in the water/xylene mixture, the time, and the temperature. The graft copolymer, IPP‐g‐PAAm, was characterized with IR spectroscopy and thermogravimetric analysis. By a comparison of the results of the phase‐transfer‐catalyzed graft copolymerization of AAm onto IPP and the preirradiation method, it was observed that the optimum reaction conditions were milder for the phase‐transfer‐catalyst‐aided graft copolymerization. Milder reaction conditions, including the temperature, the time of reaction, and a moderate initiator (BPO), in comparison with high‐energy γ‐rays, led to better quality products, and the reaction proceeded smoothly with high productivity. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2364–2375, 2004     

Optimized conditions for the grafting reaction of poly(methyl methacrylate) onto oil‐palm empty fruit bunch fibers

This article describes the graft copolymerization of poly(methyl methacrylate) (PMMA) onto oil‐palm empty fruit bunches (OPEFBs) with a fiber length of less than 75 μm. The graft copolymerization was carried out under a nitrogen atmosphere by a free‐radical initiation technique in an aqueous medium. Hydrogen peroxide and ferrous ions were used as a redox initiator/cocatalyst system. The PMMA homopolymer that formed during the reaction was removed from the grafted copolymers by Soxhlet extraction. Determining the effects of the reaction period, reaction temperature, and monomer concentration on the grafting percentage was the main objective, and they were investigated systematically. The optimum reaction period, reaction temperature, monomer concentration, and initiator concentration were 60 min, 50°C, 47.15 × 10^?3 mol, and 3.92 × 10^?3 mol, respectively. The maximum percentage of grafting achieved under these optimum conditions was 173%. The presence of PMMA functional groups on OPEFB and the enormous reduction of the hydroxyl‐group absorption band in PMMA‐g‐OPEFB spectra provided evidence of the successful grafting reaction. The improvement of the thermal stability of PMMA‐g‐OPEFB also showed the optimal achievement of the grafting reaction of PMMA onto OPEFB. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of xanthan gum‐g‐N‐vinyl formamide with a potassium monopersulfate/Ag(I) system

A xanthan gum‐g‐N‐vinyl formamide graft copolymer was synthesized through the graft copolymerization of N‐vinyl formamide (NVF) onto xanthan gum with an efficient system, that is, potassium monopersulfate (PMS)/Ag(I) in an aqueous medium. The effects of the concentrations of Ag(I), PMS (KHSO₅), hydrogen ion, xanthan gum, and NVF along with the time and temperature on the graft copolymerization were studied by the determination of the grafting parameters (grafting ratio, add‐on, conversion, grafting efficiency, and homopolymer) and the rate of grafting. The maximum grafting ratio was obtained at a 0.6 g/dm³ concentration of xanthan gum. All the parameters showed an increasing trend with an increasing concentration of peroxymonosulfate, except the homopolymer percentage, which showed a decreasing trend. The grafting ratio, add‐on conversion, grafting efficiency, and rate of grafting increased with the concentration of Ag(I) increasing from 0.8 × 10^?2 to 1.2 × 10^?2 mol/dm³. The optimum time and temperature for the maximum degree of grafting were 90 min and 35°C, respectively. The graft copolymer was characterized with IR spectral analysis, thermogravimetric analysis, and differential calorimetry analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1637–1645, 2006     

One‐pot synthesis of a polysaccharide‐based graft copolymer with an efficient redox pair (Fe2+/BrO3−)

A graft copolymer based on a polysaccharide (sodium salt of carboxymethylcellulose) and a vinyl monomer (acrylamide) has been synthesized in a nitrogen atmosphere, and its reaction conditions have been optimized for a better yield with ferrous sulfate and potassium bromate as a redox initiator. The effects of ferrous ion, bromate ion, hydrogen ion, sodium carboxymethylcellulose, and acrylamide along with the reaction time and temperature have been studied through the determination of the grafting parameters: the grafting ratio, add‐on, conversion, efficiency, homopolymer, and rate of grafting. The maximum yield has been found to occur when the acrylamide concentration is 8.0 × 10^?2 mol/dm³, whereas the maximum conversion occurs at a minimum concentration of acrylamide, that is, at 3.0 × 10^?2 mol/dm³. The grafting parameters have been found to increase with an increasing concentration of the redox initiator (Fe²⁺, from 2.0 × 10^?3 to 10.0 × 10^?3 mol/dm³; BrO, from 2.2 × 10^?3 to 4.0 × 10^?3 mol/dm³). The maximum efficiency occurs with a reaction time of 210 min. The rate of grafting has been found to be maximum up to 60 min; after that, it decreases rapidly. In this article, it is shown that the hydrogen ion leads to a very clear decrease in the grafting parameters as its concentration increases from 2.1 × 10^?3 to 11.3 × 10^?3 mol/dm³. Grafted gum and ungrafted gum have been characterized with Fourier transform infrared spectroscopy and thermogravimetric analysis. A probable mechanism has been suggested for graft copolymerization. It has been observed that the graft copolymer is thermally more stable than the parent backbone. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Electrochemical preparation of poly(N‐acetylaniline)/poly‐(4‐styrenesulfonic acid‐co‐maleic acid) composite film towards ascorbic acid sensing

Poly(N‐acetylaniline)/poly(4‐styrenesulfonic acid‐co‐maleic acid) (PNAANI/PSSMA) composite film was prepared by cyclic voltammetry (CV), and was characterized by FTIR and X‐ray photoelectron spectrum (XPS). The electroactivity of the composite film was high in neutral and basic solutions, and it had been used for amperometric determination of ascorbic acid (AA). Compared with pure PNAANI film, the catalytic activity of the composite film was much better. AA was detected amperometrically in sodium citrate buffer at a potential of 0.3 V (versus SCE). The response current was proportional to the concentration of ascorbic acid in the range of 4.7 × 10^?6 to 5.0 × 10^?5M and 5.0 × 10^?5 to 2.5 × 10^?3M, respectively, with the detection limit of 1.9 × 10^?6 mol L^?1 at a signal to noise ratio 3. In addition, the stability and reusability of the composite film were performed well, and it was satisfying to be used for determination of AA in real fruit juice samples. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Ceric(IV) ion‐induced graft copolymerization of acrylamide and ethyl acrylate onto cellulose

Graft copolymerization of acrylamide (AAm) and ethyl acrylate (EA) onto cellulose has been carried out from their binary mixtures using ceric ammonium nitrate (CAN) as an initiator in the presence of nitric acid at 25 ± 1 °C. The extent of acrylamide grafting increased in the presence of the EA comonomer. The composition of the grafted chains (F_AAm = 0.52) was found to be constant during the feed molarity variation from 7.5 × 10^?2 to 60.0 × 10^?2 mol L^?1, whereas the composition of the grafted chains (F_AAm) was found to be dependent on feed composition (f_AAm) and reaction temperature. The effects of ceric(IV ) ion concentration, reaction time and temperature on the grafting parameters have been studied. The grafting parameters showed an increasing trend up to 6.0 × 10^?3 mol L^?1 concentration of CAN at a feed molarity of 30.0 × 10^?2 mol L^?1 and showed a decreasing trend on further increasing the concentration of CAN (>6.0 × 10^?3 mol L^?1) at a constant concentration of nitric acid (5.0 × 10^?2 mol L^?1). The composition of the grafted chains (F_AAm) was determined by IR spectroscopy and nitrogen content and the data obtained then used to determine the reactivity ratios of the acrylamide (r₁) and ethyl acrylate (r₂) comonomers by using a Mayo and Lewis plot. The reactivity ratios of acrylamide and ethyl acrylate were found to be r₁ = 0.54 and r₂ = 1.10, respectively, and hence the sequence lengths of acrylamide (m?M₁) and ethyl acrylate (m?M₂) in the grafted chains are arranged in an alternating form, as the product of the reactivity ratios of acrylamide and ethyl acrylate (r₁ × r₂) is less than unity. The rate of graft copolymerization of the comonomers onto cellulose was found to be dependant on the ‘squares’ of the concentrations of the comonomers and on the ‘square root’ of the concentration of ceric ammonium nitrate. The energy of activation (ΔE_a) of graft copolymerzation was found to be 5.57 kJ mol^?1 within the temperature range from 15 to 50 °C. On the basis of the results, suitable reaction steps have been proposed for the graft copolymerzation of acrylamide and ethyl acrylate comonomers from their mixtures. Copyright © 2005 Society of Chemical Industry     

Graft copolymerization of acrylic acid onto caesarweed fibers by cerric ion–toluene redox pair

The graft copolymerization of acrylic acid onto caesarweed fibers in aqueous media by cerric ion–toluene redox pair has been investigated. The percentage graft increased and then decreased with cerric ion concentration ranging from 8.3 to 100.0 × 10^?3 M with a peak value of 17%. The effects of toluene, substituted toluenes, acids, and acrylic acid were examined. The percentage graft increased and then decreased with toluene concentration with an optimum value of 53% at 18.0 × 10^?4 M toluene. Under identical reaction conditions, the percentage graft after 30 min for the graft polymerization initiated by substituted toluenes are in the order of p-toluene sulfonic acid > toluene > p-Xylene ? o-toluidine. Low concentrations of acetic acid were favorable to the graft polymerization. The percentage graft increased linearly with acrylic acid concentration reaching a value of 53% at 1.39 M acrylic acid. The presence of neutral salts had nominal effects on the percentage graft. The effect of temperature was investigated between 20 and 60°C. The percentage graft increased with temperature up to 40°C but showed a negative temperature dependence beyond 40°C. The calculated activation energy was 6.2 kcal mol^?1. Characterization of the physical properties of the grafted fibers was also conducted. © 1994 John Wiley & Sons, Inc.     

Functionalization of Poly(propylene) Fabric with 4‐Vinylpyridine,N,N‐Dimethylacrylamide and Styrene by γ‐Radiation‐Induced Grafting in an Aqueous Environment

Summary: VP and co‐monomers DMAAm and ST were successfully grafted onto a PP fabric in an emulsion copolymerization process initiated by γ‐radiation. The radiation dose, concentration of VP, the ratio of VP/DMAAm and VP/ST in the reaction solution, and the reaction temperature dependent graft copolymerization were investigated. The order of dependence of the initial rate of grafting on the radiation dose was found to be in the range of 1.2 to 0.93 for VP; 0.84 to 0.70 for VP/DMAAm and for VP/ST was in the range of 0.59 to 0.41. The activation energy of the graft copolymer reaction was determined to be 40.18 J · mol^?1 for 0.464 mol · L^?1 VP. In the case of co‐monomer mixtures (VP/DMAAm: 0.464/0.5) the energy of activation was noticeably higher at 49.71 J · mol^?1 while for VP/ST (0.464/0.436) the activation energy was same as that of VP. XRD results showed that overall crystallinity significantly decreased with the increase of graft weight with a noticeable change in the chemical structure of the PP, indicating that the graft copolymer reaction was taking place both in the amorphous and crystalline regions of PP. A similar characteristic behavior was also obtained by DSC, which revealed the presence of an endotherm process in the range of 25 to 130 °C depending on the degree of grafting, attributed to the grafted chains of the monomer/co‐monomers. In order to determine the graft copolymer reaction of VP, DMAAm and ST onto the backbone of PP, the reaction products were characterized by FTIR spectroscopy. A good correlation was found between changes of crystallinity and level of graft copolymerization as determined by WAXRD and DSC.

Typical XRD traces of as‐received PP fabric (PPF) and grafted with VP (PPF‐g‐VP).     

Dynamic adsorption behaviors between Cu2+ ion and water‐insoluble amphoteric starch in aqueous solutions

Dynamic adsorption behavior between Cu²⁺ ion and water‐insoluble amphoteric starch was investigated. The sorption process occurs in two stages: external mass transport occurs in the early stage and intraparticle diffusion occurs in the long‐term stage. The diffusion rate of Cu²⁺ ion in both stages is concentration dependent. In the external mass‐transport process, the diffusion coefficient (D₁) increases with increasing initial concentration in the low‐ (1 × 10^?3‐4 × 10^?3M) and high‐concentration regions (6 × 10^?3‐10 × 10^?3M). The values of adsorption activation energy (k_d1) in the low‐ and high‐concentration regions are 15.46–24.67 and ?1.80 to ?11.57 kJ/mol, respectively. In the intraparticle diffusion process, the diffusion coefficient (D₂) increases with increasing initial concentration in the low‐concentration region (1 × 10^?3‐2 × 10^?3M) and decreases with increasing initial concentration in the high‐concentration region (4 × 10^?3‐10 × 10^?3M). The k_d2 values in the low‐ and high‐concentration regions are 9.96–15.30 and ?15.53 to ?10.71 kJ/mol, respectively. These results indicate that the diffusion process is endothermic in the low‐concentration region and is exothermic in the high‐concentration region for both stages. The external mass‐transport process is more concentration dependent than the intraparticle diffusion process in the high‐concentration region, and the dependence of concentration for both processes is about equal in the low‐concentration region. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2849–2855, 2001     

Synthesis and characterization of starch‐poly(methyl methacrylate) graft copolymers

The graft copolymerization was carried out by methyl methacrylate with starch in which azobisisobutyronitrile was used as an initiator. The grafting reactions were carried out within a 65–95°C temperature range, and the effect of the monomer, initiator concentrations, and the amount of starch on the graft yield were also investigated. The maximum graft yield was obtained at a azobisisobutyronitrile concentration of 2.0 × 10^?3 mol/L. The overall rate activation energy of the reaction was found to be 89.42 kJ/mol. The grafted starches were characterized with infrared spectroscopy, scanning electron microscopy, and thermogravimetry. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 53–57, 2002