Surface modification of poly(vinylidene fluoride) film by remote Ar, H2, and O2 plasmas

The surface modification of poly(vinylidene fluoride) (PVDF) film induced by remote Ar, H₂, and O₂ plasmas have been investigated using contact angle measurement, X-ray photoelectron spectroscopy, and scanning probe microscope. The contact angle of water shows an improvement in the PVDF surface wettability during short plasma exposure time. Three remote plasmas treated PVDF sheet surfaces occurred dehydrofluorination and oxidation reactions simultaneously. Remote hydrogen plasma was the most effective in defluorination reactions and remote oxygen plasma was unfavorable to abstract fluorine atoms.     

Synthesis and electro‐optical properties of novel Y‐type polyurethanes containing dioxynitrostilbene

3,4‐Di‐(2′‐hydroxyethoxy)‐4′‐nitrostilbene (2) was prepared by the reaction of 2‐iodoethanol with 3,4‐dihydroxy‐4′‐nitrostilbene. Diol 2 was condensed with 2,4‐toluenediisocyanate, 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate and 1,6‐hexamethylenediisocyanate to yield novel Y‐type polyurethanes 3–5 containing dioxynitrostilbene as a non‐linear optical (NLO)‐chromophore. Polymers 3–5 were soluble in common organic solvents, such as acetone and DMF. These polymers showed thermal stability up to 280 °C in TGA thermograms with T_g values in the range of 100–143 °C in DSC thermograms. The approximate lengths of aligned NLO‐chromophores of the polymers estimated from AFM images were around 2 nm. The SHG coefficients (d₃₃) of poled polymer films were around 4.5 × 10^?8 esu. Poled polymer films had improved temporal and long‐term thermal stability owing to the hydrogen bonding of urethane linkage and the main‐chain character of the polymer structure, which are acceptable for NLO device applications. Copyright © 2004 Society of Chemical Industry     

Surface modification of thermotropic poly(oxybenzoate‐co‐oxynaphthoate) copolyester by remote oxygen plasma for copper metalization

Poly(oxybenzoate‐co‐oxynaphthoate) (POCO) film surfaces were modified with remote oxygen plasma, and the effects of the modification on the adhesion between the copper layer and POCO were investigated. The remote‐oxygen‐plasma treatment led to a noticeable decrease in the contact angle, which was mainly due to the C? O functional groups on the surface. The modification of the POCO surface by remote oxygen plasma was effective in improving the adhesion with copper metal. The peel strength for the copper metal/POCO system was enhanced from 10 to 127.5 mN/5 mm by the surface modification. The failure mode of the copper metal/POCO system was an interface layer between the oxidized micro‐POCO fibril surface and the copper metal layer. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2400–2408, 2003     

Water and oil repellency of polysiloxanes with highly fluorinated alkyl side chains

A series of fluorinated polysiloxanes (FLSs) with the 3,3,4,4,5,5,6,6,6‐nonafluorohexyl group (C₄F₉C₂H₄? ), 4,4,5,5,6,6,7,7,8,8,9,9,10,10,11,11,11‐heptadecafluoroundecyl group (C₈F₁₇C₃H₆? ), 3‐(2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,9‐heptadecafluorononanamido) propyl group [HDFNAG; C₈F₁₇(C?O)NHC₃H₆? ], and 3‐(N‐methyl‐2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,9‐heptadecafluorononanamido) propyl group [C₈F₁₇(C?O)N(CH₃)C₃H₆? ] were synthesized. Their homopolymers (homo‐FLSs) and copolymers with dimethylsiloxane (co‐FLSs) were included. The polyester fabrics were treated with these FLSs, and their water and oil repellency was evaluated. These fabrics showed a moderate to good level of water repellency but a poor to zero level of oil repellency, except for those fabrics treated with homo‐FLSs with HDFNAG. The characterization of the surface chemical composition by X‐ray photoelectron spectroscopy showed that the concentration of fluorine at the surface was not particularly high for poly(ethylene terephthalate) films treated with homo‐FLSs with HDFNAG. Differential scanning calorimetry measurements of these FLSs revealed that only homo‐FLSs with HDFNAG had a high melting temperature of 75.7°C. These two measurements suggested that the reason the fabrics treated with homo‐FLSs with HDFNAG showed good oil repellency was not because the concentration of fluorine at the surface was much higher than for the others but because the reorientation of HDFNAG did not take place for its packing after contact with oil. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1085–1091, 2003     

Crystallization behavior of poly(N‐methyldodecano‐12‐lactam). III. Kinetics of isothermal crystallization

Differential scanning calorimetry, combined with Avrami theory, was used to investigate the kinetics of three steps of the complex crystallization process of poly(N‐methyldodecano‐12‐lactam) (MPA): (1) primary melt crystallization at respective crystallization temperature (T_c), (2) additional crystallization at 30°C, and (3) recrystallization at 54°C. Kinetics of the three steps was discussed with respect to T_c. The Avrami exponent n of primary melt crystallization decreased between 2.5 and 1.9 in the range of T_c values of ?10 to 20°C, which suggests heterogeneous nucleation, followed by two‐dimensional growth, with a larger involvement of homogeneous thermal nucleation at greater supercoolings. The crystallization rate constant k decreased with increasing T_c. The value of n = 1.5 for additional crystallization implies a two‐dimensional diffusion‐controlled crystal growth with a suppressed nucleation phase. For T_c values ranging from ?10 to 0°C and 0 to 20°C, k showed weak and quite strong decreasing dependencies on T_c, respectively. The recrystallization mechanism involved partial melting of primary crystallites and two‐dimensional rearrangement of chains into a more perfect structure. The rate of this process was almost independent of T_c. The values of activation energies were derived for the three steps of MPA crystallization using the Arrhenius equation. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 279–293, 2004     

Synthesis of novel poly(vinyl ether)s containing the oxybenzylidenemalononitrile group as a nonlinear optical chromophore,and their electro‐optic properties

2,4‐Di‐(2′,2′‐dicyanovinyl)‐1‐(2′‐vinyloxyethoxy)benzene and 2,4‐di‐(2′‐carbomethoxy‐2′‐cyanovinyl)‐1‐(2′‐vinyloxyethoxy)benzene were prepared by condensation of 4‐(2′‐vinyloxyethoxy)isophthaldehyde with malononitrile and methyl cyanoacetate, respectively. The two vinyl monomers were polymerized with boron trifluoride etherate as a cationic initiator to yield poly(vinyl ether)s containing two oxybenzylidenemalononitrile and oxybenzylidenecyanoacetate groups, which are effective chromophores for second‐order nonlinear optical applications. These polymers were soluble in common organic solvents such as acetone and dimethyl sulforide. They showed thermal stabilities up to 300 °C from thermogravimetric analysis (TGA), with differential scanning calorimeter (DSC) thermograms giving T_g values in the range 73–87 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films were around 1.8 × 10^?9 esu, and these polymers showed good long‐term thermal stability for 60 days at room temperature, which is acceptable for nonlinear optical (NLO) device applications. Copyright © 2004 Society of Chemical Industry     

Evaluation of thermo‐viscosity parameters of dextran in polar and nonpolar solvent

Some thermo‐viscosity parameters like Viscosity‐molecular weight constant (K), the short‐range parameter, (A) and long‐range parameter (B) have been evaluated for the polymer “Dextran” of three different molecular weights (M?_w = 19,500, 75,000, and 250,000) in three different solvents like 6 (M) aqueous urea, 2 (M) aqueous glycine, and 50% aqueous glucose at temperatures ranging from 25 to 50°C. The study reveals that the viscosity‐molecular weight constant (K) decreases with increase in temperature for polar solvents like aqueous urea and aqueous glycine. The value of “K” increases with the rise in temperature within the range of 25 to 35°C in case of a nonpolar solvent aqueous glucose and then “K” decreases with the increase in temperature within the range of 40 to 50°C for the nonpolar solvent aqueous glucose. The short‐range parameter (A) shows the same trend as shown by “K” and the long‐range parameter “B” exhibits no definite trend with the variation of temperature. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 440–452, 2001     

In situ atomic oxygen erosion study of fluoropolymer films using X‐ray photoelectron spectroscopy

The surfaces of a homologous series of fluoropolymers were characterized in situ using X‐ray photoelectron spectroscopy before and after a 15‐min exposure to the flux produced by a unique hyperthermal atomic oxygen (AO) source, which produces a flux of about of 10¹⁵ atoms cm^?2 s^?1. The linear polymers investigated in this study include high‐density polyethylene (HDPE), poly(vinyl fluoride) (PVF), poly(vinylidene fluoride) (PVdF), and poly(tetrafluoroethylene) (PTFE). They possess a similar base structure with increasing fluorine‐to‐carbon ratios of 0, 1 : 2, 1 : 1, and 2 : 1, respectively. No interaction of the AO with the nonfluorine‐containing linear polymer HDPE was detected over this short exposure. However, a correlation exists between the chemical composition of the fluorinated polymers and the induced chemical and structural alterations occurring in the near‐surface region as a result of exposure to AO. The data indicate that AO initially attacks the fluorine portion of the polymers, resulting in a substantial decrease in the near‐surface fluorine concentration. The near‐surface fluorine‐to‐carbon ratios of PVF, PVdF, and PTFE decreased during the 15‐min AO exposure by 68, 39, and 18.5%, respectively. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1977–1983, 2004     

Direct fluorination of the polyimide matrimid® 5218: The formation kinetics and physicochemical properties of the fluorinated layers

Fluorinated polymers have a set of unique properties, including improved chemical stability and thermal stability and good barrier and membrane parameters, which are mainly defined by their surface properties. This article presents systematic data on the direct fluorination of the polyimide Matrimid® 5218, a commercially available polymer suitable for the formation of gas‐separation hollow fibers. Changing the fluorination conditions (i.e., the fluorinated mixture composition, fluorine partial pressure, and treatment duration) allows the rate of formation of the surface‐fluorinated layer over the 0.1–10 μm range to be kept under control. The physicochemical properties of modified layers (i.e., the chemical composition, formation of radicals, refractive index, IR and UV spectra, density, and surface energy) are examined. The thickness of the fluorinated layer (δ_F) depends on the fluorination duration (t): δ_F ～ t^0.5. During fluorination, hydrogen atoms are replaced with fluorine, double bonds are saturated with fluorine, and at least one CN bond in the five‐member ring is disrupted. Fluorination results in a significant increase in the polymer density, transparency in the visible and ultraviolet regions of spectra, and a reduction of the refractive index. A high concentration of long‐living radicals (up to ～5 × 10¹⁹ radicals/cm³ of the fluorinated layer) is generated under fluorination. This can be used for subsequent grafting (e.g., with acrylonitrile). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 6–17, 2004     

Comparative study of PHBV/TBP and PHBV/BPA blends

In order to clarify the effects of phenols on properties of polyesters, the blends of poly[(3‐hydroxybutyrate)‐co‐(3‐hydroxyvalerate)] (PHBV) with 4,4′‐dihydroxydiphenylpropane (BPA) and p‐tert‐butylphenol (TBP) were studied. The FTIR spectra revealed that there was strong hydrogen‐bond (H‐bond) interaction between PHBV and both phenols. By evaluating the fraction of H‐bonded C?O in the blend, it was concluded that BPA showed a stronger tendency than TBP to form H‐bonds with PHBV. Accordingly, BPA formed a stronger suppression than TBP on the crystallization of PHBV. When 30 wt% BPA or 50 wt% TBP were added into PHBV, the crystallization of PHBV was completely suppressed in the DSC cooling scan. As the phenol content was increased, the T_g of PHBV/TBP blend decreased while the T_g of PHBV/BPA blend increased. This difference indicated that TBP and BPA acted as plasticizer and physical crosslinking agent, respectively. Copyright © 2004 Society of Chemical Industry     

Preparation and characterization of poly(silyl ester)s containing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones

The two poly(silyl ester)s containing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones have been prepared via polycondensation reaction of di‐tert‐butyl adipate and di‐tert‐butyl fumarate with 2,2‐bis(p‐chloro dimethylsiloxy‐phenyl)propane to give tert‐butyl chloride as the condensate. The polymerizations were performed under nitrogen at 110°C for 24 h without addition of solvents and catalysts to obtain the poly(silyl ester)s with weight average molecular weights typically ranging from 5000 to 10,000 g/mol. Characterization of the poly(silyl ester)s included ¹H NMR and ¹³C NMR spectroscopies, infrared spectroscopy, ultraviolet spectroscopy, differential scanning calorimetry, thermogravimetric analysis (TGA), gel permeation chromatography, and Ubbelohde viscometer. The glass transition temperatures (T_g) of the obtained polymers were above zero because of the introducing 2,2‐bis(p‐dimethylsiloxy‐phenyl)propane units in the polymer backbones. The TGA/DTG results showed that the obtained poly(silyl ester)s were stable up to 180°C and the residual weight percent at 800°C were 18 and 9%, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1937–1942, 2006     

Relative strength of H‐bonding groups on biodegradable polymer‐based blends in solution

The intermolecular hydrogen bonding interactions between poly(3‐hydroxybutyrate) and poly(styrene‐co‐vinyl phenol) copolymers with mutual solvent epichlorohydrin were thoroughly investigated by steady‐state fluorescence and viscosity techniques. Fluorescence spectroscopy along with viscosity technique was used to asses the intermolecular hydrogen bonding between poly‐(3‐hydroxybutyrate) and its blends with five copolymer samples of styrene–vinyl phenol, containing different proportions of vinyl phenol but similar average molecular weight and polydispersity index. In the case of very low OH contents (2–4 mol %), as expected, both components of poly(3‐hydroxybutyrate) and poly(styrene‐co‐4‐vinylphenol) chains are well separated and remain so independently of the mixed polymer ratio and overall polymer concentration as well. Conversely, when the OH content reaches 5.8 mol % or more, a significant decrease of the intrinsic fluorescence intensity emitted by the copolymer is detected upon addition of aliquots of poly(3‐hydroxybutyrate). In these cases, an average value for the interassociation equilibrium constant, K_A = 8.7, was obtained using a binding model formalism. A good agreement of these results with those obtained from complementary viscosity measurements, through the interaction parameter, Δb, was found. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 900–910, 2006     

Synthesis and characterization of greenish‐blue emitting vinyl copolymer containing pyrene and triarylamine moieties

Two fluorescent monomers N‐phenyl‐N‐(4‐vinylphenyl)pyren‐1‐amine (vinyl‐PyPA) and 1‐vinyl pyrene (VPy) were synthesized in good yields. A series of soluble conductive vinyl copolymers P(PyPA‐co‐VPy) containing vinyl‐PyPA and VPy moieties in different composition ratios were prepared by free radical solution polymerization. These copolymers showed high T_g (190?201 °C) and good thermal stability. The photoluminescence emission maxima of the copolymers were all in the range 474.5?478.5 nm, which was similar to the poly(N‐phenyl‐N‐(4‐vinylphenyl)pyren‐1‐amine) (P(PyPA)) (475 nm) but blue shifted compared with poly(1‐vinyl pyrene) (PVPy) (490.5 nm). The lifetime of the copolymers increased from 10.2 to 29.7 ns with an increase in pyrene content. The copolymers had higher quantum yields (0.51) than those of the homopolymers of P(PyPA) (0.48) and PVPy (0.13). The highest occupied molecular orbital of the copolymers remained relatively unchanged from P(PyPA), while the lowest unoccupied molecular orbital varied from ?2.41 eV to ?2.51 eV with an increase in pyrene ratio in the copolymers. The energy bandgaps of the copolymers (from 2.70 eV to 2.81 eV) were smaller than those of P(PyPA) (2.82 eV) and PVPy (3.47 eV). Two polymer light‐emitting diode (PLED) series were attempted including indium tin oxide (ITO) (fluorocarbon (CFx) treated)/P(PyPA‐co‐VPy)/LiF/Al and ITO(CFx treated)/P(PyPA‐co‐VPy)/1,3,5‐Tri(1‐phenyl‐1H‐benzo[d]imidazol‐2‐yl)phenyl (TPBi)/LiF/Al. The results suggested that the PyPA moiety is hole conducting and the PLEDs can achieve high luminance from 650 to 1150 cd m^?2 (at 100 mA cm^?2) only when an electron injecting layer TPBi is employed. © 2013 Society of Chemical Industry     

Influence of substrate dideuteration on the reaction of the bifunctional heme enzyme psi factor producing oxygenase A (PpoA)

PpoA is a bifunctional enzyme that catalyzes the dioxygenation of unsaturated C18 fatty acids. The products of this reaction are termed psi factors and have been shown to play a crucial role in conferring a balance between sexual and asexual spore development as well as production of secondary metabolites in the fungus Aspergillus nidulans. Studies on the reaction mechanism revealed that PpoA uses two different heme domains to catalyze two subsequent reactions. Initially, the fatty acid substrate is dioxygenated at C8, yielding an 8‐hydroperoxy fatty acid at the N‐terminal domain. This reaction is catalyzed by a peroxidase/dioxygenase‐type domain that exhibits many similarities to prostaglandin H2 synthases and involves a stereospecific homolytic hydrogen abstraction from C8 of the substrate. The C terminus harbors a heme thiolate P450 domain in which rearrangement of the 8‐hydroperoxide to the final product, a 5,8‐dihydroxy fatty acid, takes place. To obtain further information about the intrinsic kinetics and reaction mechanism of PpoA, we synthesized C5‐dideutero‐ and C8‐dideutero‐oleic acid by a novel protocol that offers a straightforward synthesis without employing the toxic additive hexamethylphosphoramide (HMPA) during C? C coupling reactions or mercury salts upon thioketal deprotection. These deuterated fatty acids were then employed for kinetic analysis under multiple‐turnover conditions. The results indicate that the hydrogen abstraction at C8 is the rate‐determining step of the overall reaction because we observed a KIE (V_H/V_D) of ～33 at substrate saturation that suggests extensive nuclear tunneling contributions for hydrogen transfer. Deuteration of the substrate at C5, however, had little effect on V_H/V_D but resulted in a different product pattern presumably due to an altered lifetime and partitioning of a reaction intermediate.     

Comparative study of propylene polymerization using monosupported and bisupported titanium‐based Ziegler–Natta catalysts

Heterogeneous Ziegler–Natta systems—MgCl₂ (ethoxide type)/TiCl₄/di‐n‐butyl phthalate (DNBP)/triethylaluminum (TEA)/dimethoxymethylcyclohexylsilane (DMMCHS) and SiO₂/MgCl₂ (ethoxide type)/TiCl₄/DNBP/TEA/DMMCHS—were studied for the polymerization of propylene. The slurry polymerization of propylene was carried out with the catalyst systems in n‐heptane. Both systems performed with optimum activity at a particular [Al]/[DMMCHS]/[Ti] molar ratio. The ratio to reach the highest activity was much lower for the bisupported catalyst system. The productivity of the bisupported catalyst was higher than that of the monosupported one. Polypropylene of a high isotacticity index (II; >96%) was obtained with both systems and did not significantly change with an increasing [Al]/[DMMCHS]/[Ti] molar ratio. The addition of hydrogen as a chain‐transfer agent reduced II of the polymers obtained with both systems. The effect of the polymerization temperature (40–75°C) on the viscosity‐average molecular weight (M_v) and II showed a decrease in both cases. The bisupported catalyst system produced a polymer with higher M_v. The effect of temperature on II was similar for both the monosupported and bisupported systems. A monomer pressure of 2.02 × 10⁵ to 0.8 × 10⁶ Pa increased M_v of the obtained polymer. II of the polymer slightly decreased with increasing monomer pressure. The titanium content of the catalyst was 1.70 and 3.55% for the monosupported and bisupported systems, respectively. The surface area of the bisupported catalyst was higher than that of the monosupported catalyst. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2220–2226, 2006     

Solubilization of phthalocyanines into methanol with fluoroalkyl end‐capped N‐(1,1‐dimethyl‐3‐oxobutyl)‐ and N,N‐dimethyl‐acrylamide oligomers

Self‐assembled molecular aggregates of fluoroalkyl end‐capped N‐(1,1‐dimethyl‐3‐oxobutyl)‐ and N,N‐dimethyl‐acrylamide oligomers in methanol were found to interact with phthalocyanines as guest molecules to exhibit good solubility. On the other hand, the corresponding nonfluorinated oligomers were not effective in solubilizing phthalocyanines under similar conditions. In these oligomers, fluorinated N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide oligomers were more effective in solubilizing phthalocyanines in methanol. Self‐assemblies formed by fluorinated oligomer‐phthalocyanine complexes are applied to the surface modifications of polystyrene (PS), and the modified PS surface exhibited not only a strong oleophobicity imparted by fluorine but also good hydrophilicity. Thus, these fluorinated molecular aggregate‐phthalocyanine systems are suggested to have high potential for new fluorinated functional materials through their excellent properties imparted by fluorine and phthalocyanines. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 521–525, 2004     

Synthesis and nonlinear optical properties of a novel polyurethane containing cyanovinylthiophene with enhanced thermal stability of dipole alignment for electro‐optic applications

Stabilization of electrically induced dipole alignment is one of the important criteria in the development of nonlinear optical (NLO) polymers for electro‐optic device applications. Polyurethanes for NLO applications have attracted attention because of their high thermal stability due to hydrogen bonding. In the work reported here, we designed and synthesized a new type of NLO polyurethane, in which the pendant NLO chromophores are part of the polymer backbone. This mid‐type NLO polymer is expected to have the merits of both main‐chain and side‐chain NLO polymers, namely stable dipole alignment and good solubility. 1‐[3,4‐Di‐(2‐hydroxyethoxy)phenyl]‐2‐(2‐thienyl)ethene was prepared and condensed with 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate to yield a polyurethane. This polyurethane was reacted with tetracyanoethylene to give a novel Y‐type polyurethane (7) containing 1‐(3,4‐dioxyphenyl)‐2‐[5‐(1,2,2‐tricyanovinyl)‐2‐thienyl]ethenes as NLO chromophores, which constitute part of the polymer backbone. Polyurethane 7 is soluble in common organic solvents such as N,N‐dimethylformamide and dimethylsulfoxide. It shows a thermal stability up to 280 °C from thermogravimetric analysis with a glass transition temperature obtained from differential scanning calorimetry of ca 162 °C. The second harmonic generation (SHG) coefficient (d₃₃) of a poled polymer film of he polyurethane at 1560 nm fundamental wavelength is ca 1.11 × 10^?18 C. Polymer 7 exhibits an enhanced thermal stability and no significant SHG decay is observed below 150 °C, which is acceptable for NLO device applications. Copyright © 2009 Society of Chemical Industry     

Thermodynamic Stability of Low‐k Amorphous SiOCH Dielectric Films

Si–O–C‐based amorphous or nanostructured materials are now relatively common and of interest for numerous electronic, optical, thermal, mechanical, nuclear, and biomedical applications. Using plasma‐enhanced chemical vapor deposition (PECVD), hydrogen atoms are incorporated into the system to form SiOCH dielectric films with very low dielectric constants (k). While these low‐k dielectrics exhibit chemical stability as deposited, they tend to lose hydrogen and carbon (as labile organic groups) and convert to SiO₂ during thermal annealing and other fabrication processes. Therefore, knowledge of their thermodynamic properties is essential for understanding the conditions under which they can be stable. High‐temperature oxidative drop solution calorimetry measurement in molten sodium molybdate solvent at 800°C showed that these materials possess negative formation enthalpies from their crystalline constituents (SiC, SiO₂, C, Si) and H₂. The formation enthalpies at room temperature become less exothermic with increasing carbon content and more exothermic with increasing hydrogen content. Fourier transform infrared spectroscopy (FTIR) spectroscopy examined the structure from a microscopic perspective. Different from polymer‐derived ceramics with similar composition, these low‐k dielectrics are mainly comprised of Si–O(C)–Si networks, and the primary configuration of carbon is methyl groups. The thermodynamic data, together with the structural analysis suggest that the conversion of sp² carbon in the matrix to surface organic functional groups by incorporating hydrogen increases thermodynamic stability. However, the energetic stabilization by hydrogen incorporation is not enough to offset the large entropy gain upon hydrogen release, so hydrogen loss during processing at higher temperatures must be managed by kinetic rather than thermodynamic strategies.     

Thermally stable and amorphous polyfluorene

Two‐dimensional ladder‐type polyfluorenes, which consist of polystyrene as the polymer backbone and polyfluorene as the light emitting component, were prepared through three synthetic pathways A, B, and C. In path A, the precursor polymer IP1 was obtained from the graft reaction of fluorene to units of poly(vinylbenzyl chloride) and then the ladder‐type polymer P1 was prepared by coupling at the 2,7‐position of fluorene with FeCl₃ as an oxidizing agent in chloroform. In path B, IP2 was obtained from the graft reaction of lithiated 2,7‐dibromofluorene and units of poly(vinylbenzyl chloride), and then P2 was prepared by the aryl‐coupling of IP2 with a Ni‐catalyst through the reductive polymerization. In path C, 4‐(fluorenylmethyl)styrene was prepared by the reaction of 4‐chloromethylstyrene and lithiated fluorene. Fluorene‐attached syndiotatic polystyrene, IP3, was obtained in the polymerization of 4‐(fluorenylmethyl)styrene with CpTiCl₃‐MAO catalyst, and for P3 oxidative coupling was further carried out. The polymers exhibited glass transition temperatures (T_g) of 422°C for P1, 404°C for P2, and 311°C for P3, and no melting endotherms were found. Syndiotaticity contributes the high glass temperature of P3 despite low molecular weight. Thermal decomposition temperatures at 5 wt % loss (T_d) of 475°C for P1, 448°C for P2, and 365°C for P3 were observed. The fluorescence peaks of P1, P2, and P3 were observed at 401, 416, and 415 nm, respectively. For the emission spectrum of P3, no shoulder or peak regarding of aggregation of polyfluorene was observed. Syndiotacticity, due to the alternative configuration of fluorene, prevents a large Stoke's shift of the luminescence spectrum. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1335–1340, 2005     

Fluorinated poly(aryl thioether)s and poly(aryl sulfone)s derived from 2,3,4,5,6‐pentafluorobenzoic acid

Poly(aryl thioether)s (F‐PTEs) containing 2,3,5,6‐tetrafluoro‐1,4‐phenylene moiety and polar moiety, such as 1,3,4‐ozadiazole, ether ketone, and amide groups, were synthesized by nucleophilic aromatic substitution reaction of aryl fluorides and 4,4′‐thiobisbenzenthiol. F‐PTEs were amorphous with good thermal properties including high glass transition temperature (T_g) and thermal stability, solubility, and hydrophobicity. F‐PTEs were transformed into poly(aryl sulfone)s (F‐PSs) by the oxidation reaction with hydrogen peroxide in acetic acid. Because of the sulfone group, the T_gs of the F‐PSs were 30–40°C higher than those of the corresponding F‐PTEs. F‐PSs maintained solubility in polar aprotic solvents and exhibited hydrophobicity in spite of the content of polar sulfone groups due to the highly substituted fluorine atoms. These F‐PTEs and F‐PSs were a new class of high‐performance polymers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008