Syntheses of chemical‐modified cellulose obtained from waste pulp

Chemical‐modified pulps were synthesized from four types of waste pulps (Pulp1–4) and succinic anhydride (SAn) or maleic anhydride (MAn). The solubility of the modified pulps was evaluated in common organic solvents, and their thermal properties were investigated by DSC measurement. The solubility of the modified pulps increased with an increasing degree of substitution (DS). However, no T_g or T_m of these modified pulps was confirmed. Pulps and modified pulps were graft‐polymerized with ε‐caprolactone (CL) in bulk and in DMAc/LiCl. Although the solubility of the graft copolymers was similar to modified pulps, some graft copolymers showed a T_g by the introduction of CL units. In the bulk, graft copolymers obtained from modified pulps and nonmodified pulps showed a T_g of about 75°C and no T_g, respectively. In DMAc/LiCl, the obtained graft copolymers from both modified and nonmodified pulps exhibited a T_g of 95–110°C. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2059–2065, 2003     

Studies of crosslinked styrene–alkyl acrylate copolymers for oil absorbency application. I. Synthesis and characterization

The prepolymers for a novel oil absorbent were synthesized by copolymerizing styrene with 2‐ethylhexyl acrylate (EHA), lauryl acrylate (LA), lauryl methacrylate (LMA), and stearyl acrylate (SA). Suspension polymerization was carried out using benzoyl peroxide (BPO) as an initiator with a varying monomer feed ratio, and the copolymers were characterized by FTIR, ¹H‐NMR, DSC, and a solubility test. The copolymers were random copolymers with a single phase, and their compositions were similar to those in the monomer feed. The T_g of the copolymer could be controlled by varying the styrene/acrylate ratio. Acrylates introduced the crosslinking to linear polymers as a side reaction. Crosslinked copolymers were synthesized by adding divinylbenzene (DVB) as a crosslinking agent. At a low degree of crosslinking (0.5 wt % DVB), the T_g of the crosslinked copolymers was lower than or similar to that of the uncrosslinked ones. At a high degree of crosslinking, the T_g increased with increasing crosslinking density. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 903–913, 2000     

Biodegradability of poly(ethylene terephthalate) copolymers with poly(ethylene glycol)s and poly(tetramethylene glycol)

Poly(ethylene terephthalate) copolymers were prepared by melt polycondensation of dimethyl terephthalate and excess ethylene glycol with 10–40mol% (in feed) of poly(ethylene glycol) (E) and poly(tetramethylene glycol) (B), with molecular weight (MW) of E and B 200–7500 and 1000, respectively. The reduced specific viscosity of copolymers increased with increasing MW and content of polyglycol comonomer. The temperature of melting (T_m), cold crystallization and glass transition (T_g) decreased with the copolymerization. T_m depression of copolymers suggested that the E series copolymers are the block type at higher content of the comonomer. T_g was decreased below room temperature by the copolymerization, which affected the crystallinity and the density of copolymer films. Water absorption increased with increasing content of comonomer, and the increase was much higher for E1000 series films than B1000 series films. The biodegradability was estimated by weight loss of copolymer films in buffer solution with and without a lipase at 37°C. The weight loss was enhanced a little by the presence of a lipase, and increased abruptly at higher comonomer content, which was correlated to the water absorption and the concentration of ester linkages between PET and PEG segments. The weight loss of B series films was much lower than that of E series films. The abrupt increase of the weight loss by alkaline hydrolysis is almost consistent with that by biodegradation.     

Synthesis and properties of novel polyvinyl alcohol–lactic acid gels

This article describes a process for esterifying polyvinyl alcohol (PVA) with L‐lactide (LLA) and D,L‐lactic acid (LA), using ethyl acetate and N,N′‐dimethyl formamide at temperatures varying from 120 to 150°C. The grafting process was carried out under nitrogen to avoid possible oxidation or other degradation of the process ingredients and product. Lower T_g values were obtained for the PVA/LLA graft copolymers of higher LLA content suggesting some compatibility in the amorphous phase. Higher T_g values were observed for PVA/LA graft copolymers that yielded tough polymer films. The structure of the copolymers was studied by solid‐state ¹³C‐NMR, infrared spectroscopy, and differential scanning calorimetry (DSC). The PVA/LA films exhibited melt processability and good mechanical properties such as yield strength, tensile energy at break, modulus, and elongation at break. The polymer films produced through compression molding at 100°C showed good swelling properties. The transport coefficient (n) values determined from the plot of log(M_t/M_∞) vs. log t indicate Fickian behavior, and they are consistent with the reported literature values for other PVA systems. The nature of water in gels [bound water (W_b), freezing (W_f), and freezing bound (W_fb), and water content (W_t)] was evaluated from DSC data. The results demonstrate that PVA/LA hydrogels with good combination of thermal, physicomechanical, and swelling properties can be prepared via the lactic acid esterification of PVA polymer process described. Besides being melt processable, the PVA/LA gels exhibit a melting point, which indicates possibly use of higher temperatures. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Composition,thermal properties,and biodegradability of a new biodegradable aliphatic/aromatic copolyester

A series of new aliphatic/aromatic copolyesters [poly(hexylene terephthalate‐co‐hexylene adipate) (PHTA)] were synthesized on the bases of 1,6‐hexanediol, adipic acid, and dimethyl terephthalate and characterized by gel permeation chromatography, ¹H‐NMR, wide‐angle X‐ray diffraction (WAXD), differential scanning calorimetry (DSC), and compost testing. ¹H‐NMR results show that the compositions of the copolyesters were in accordance with the feed molar ratios. The WAXD patterns indicated that the crystal structures of the PHTA copolyesters were determined by the dominant crystal units, and the copolyesters became less crystallizable, even amorphous, with increasing comonomer content. The DSC curves showed that the glass‐transition temperatures (T_g′s) of the PHTA copolyesters decreased linearly, and both the melting temperature (T_m) and heat of fusion decreased first and then increased with increasing hexylene adipate unit content. Under compost conditions, PHTA copolyesters with less than 60 mol % aromatic units were biodegradable. Particularly, compared with the copolyester poly(butylene terephthalate‐co‐butylene adipate), the PHTA copolyester with the same aliphatic/aromatic composition possessed a lower T_g and T_m and better biodegradability. Additionally, the biodegradability of the copolyesters could be predicted by the number‐average sequence length of aromatic units, T_g, and the temperature difference between T_m and the temperature at which biodegradation took place. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Oxygen barrier properties of PET copolymers containing bis(2‐hydroxyethyl)hydroquinones

A series of poly[ethylene‐co‐bis(2‐ethoxy)hydroquinone terephthalate], PET‐co‐BEHQ copolymers were prepared by polymerization of various substituted bis(2‐hydroxyethyl)hydroquinones (BEHQs), dimethyl terephthalate (DMT), and ethylene glycol (EG). In addition to copolymers containing 6–16.5 mol % BEHQ, the homopolymer of BEHQ with dimethyl terephthalate, p(BEHQ‐T), was also prepared. The thermal and barrier properties of amorphous materials were studied. As the amount of comonomer was increased, the T_g and T_m of the materials decreased relative to those of PET. Oxygen permeability also decreased with increasing comonomer content. This improvement in barrier‐to‐oxygen permeability was primarily due to a decrease in solubility of oxygen in the polymer. All of the copolymers tested displayed similar oxygen diffusion coefficients. The decrease in solubility correlates with the decrease in T_g. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 934–942, 2003     

Grafting of poly(3‐hydroxyalkanoate) and linoleic acid onto chitosan

Poly(3‐hydroxy octanoate) (PHO), poly(3‐hydroxy butyrate‐co‐3‐hydroxyvalerate) (PHBV), and linoleic acid were grafted onto chitosan via condensation reactions between carboxylic acids and amine groups. Unreacted PHAs and linoleic acid were eliminated via chloroform extraction and for elimination of unreacted chitosan were used 2 wt % of HOAc solution. The pure chitosan graft copolymers were isolated and then characterized by FTIR, ¹³C‐NMR (in solid state), DSC, and TGA. Microbial polyester percentage grafted onto chitosan backbone was varying from 7 to 52 wt % as a function of molecular weight of PHAs, namely as a function of steric effect. Solubility tests were also performed. Graft copolymers were soluble, partially soluble or insoluble in 2 wt % of HOAc depending on the amount of free primary amine groups on chitosan backbone or degree of grafting percent. Thermal analysis of PHO‐g‐Chitosan graft copolymers indicated that the plastizer effect of PHO by means that they showed melting transitions T_ms at 80, 100, and 113°C or a broad T_ms between 60.5–124.5°C and 75–125°C while pure chitosan showed a sharp T_m at 123°C. In comparison of the solubility and thermal properties of graft copolymers, linoleic acid derivatives of chitosan were used. Thus, the grafting of poly(3‐hydroxyalkanoate) and linoleic acid onto chitosan decrease the thermal stability of chitosan backbone. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103:81–89, 2007     

Copolymers of unsaturated and saturated poly(ether ester amide)s: Synthesis,characterization, and biodegradation

A series of biodegradable random unsaturated/saturated poly(ether ester amide)s copolymers (USPEEAs) were synthesized by an active solution polycondensation of unsaturated and saturated dicarboxylic acid‐based diester monomers with diamine salts of phenylalanine and saturated oligo(ethylene glycol) (OEG). These USPEEA copolymers were obtained with fairly good yields in DMA solvent. The chemical structures of the USPEEA copolymers were confirmed by both IR and NMR spectra. The molecular weights (M_n and M_w) of USPEEAs measured by GPC ranged from 3 to 27 kg/mol with the molecular weight distribution (MWD) ranging from 1.52 to 2.13. USPEEA copolymers obtained had T_g lower than that of the pure UPEEAs but higher than that of pure saturated poly(ether ester amide)s (SPEEA). An increase in the unsaturated component in USPEEAs led to an increase in their T_g. A preliminary in vitro biodegradation property of USPEEA copolymers were investigated in both pure PBS buffer and α‐chymotrypsin solutions. The USPEEA copolymers showed a pronounced weight loss in enzyme solutions, but a smaller weight loss in a pure PBS. The biodegradation rates of USPEEA copolymers in α‐chymotrypsin solution were much slower than those of pure PEEAs. Therefore, upon adjusting monomers feed ratio, USPEEA copolymers could have controlled chemical, physical, and biodegradation properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Glass‐transition temperatures and rheological behavior of methyl methacrylate–styrene random copolymers

Poly(methyl methacrylate‐ran‐styrene) copolymers were synthesized under monomer‐starved conditions by emulsion copolymerization. The glass‐transition temperatures (T_g's) of the copolymers were measured by differential scanning calorimetry (DSC) and torsional braid analysis (TBA). The results showed that the methyl methacrylate–styrene random copolymers produced an asymmetric T_g versus composition curve, which could not even be interpreted by the Johnston equation with different contributions of dyads to the T_g of the copolymer considered. A new sequence distribution equation concerning different contributions of triads was introduced to predict the copolymer's T_g. The new equation fit the experimental data exactly. Also, the T_g determined by TBA (T_gTBA) was higher than the one determined by DSC (T_gDSC) and the difference was not constant. The rheological behavior of the copolymers was also studied. T_gTBA ? T_gDSC increased with increasing flow index of the melt of the copolymer, and the reason was interpreted. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2891–2896, 2003     

Segmented copolymers of uniform tetra‐amide units and poly(phenylene oxide) by direct coupling

Segmented copolymers with telechelic poly(2,6‐dimethyl‐1,4‐phenylene ether) (PPE) segments and crystallizable bisester tetra‐amide units (two‐and‐a‐half repeating unit of nylon‐6,T) were studied. The copolymers were synthesized by reacting bifunctional PPE with hydroxylic end groups with an average molecular weight of 3500 g/mol and bisester tetra‐amide units via an ester polycondensation reaction. The bisester tetra‐amide units had phenolic ester groups. By replacing part of the bisester tetra‐amide units with diphenyl terephthalate units (DPT), the concentration of tetra‐amide units in the copolymer was varied from 0 to 11 wt%. Polymers were also prepared from bifunctional PPE, DPT, and a diaminediamide (6T6‐diamine). The thermal and thermal mechanical properties were studied by DSC and DMA and compared with a copolymer with flexible spacer groups between the PPE and the T6T6T. The copolymers had a high T_g of 180–200°C and a melting temperature that increased with amide content of 220–265°C. The melting temperature was sharp with monodisperse amide segments. The T_m – T_c was 39°C, which suggests a fast, but not very fast, crystallization. The crystallinity of the amide was ～ 20%. The copolymers are semicrystalline materials with a high T_g and a high T_g/T_m ratio (> 0.8). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 512–518, 2007     

Preparation,characterization, and properties of cellulose–polyacrylamide graft copolymers

Graft copolymers of acrylamide on cellulose materials (α‐cellulose 55.8%, DP 287.3) obtained from Terminalia superba wood meal and its carboxymethylated derivative (DS 0.438) were prepared using a ceric ion initiator and batch polymerization and modified batch polymerization processes. The extent of graft polymer formation was measured in graft level, grafting efficiency, molecular weight of grafted polymer chains, frequency of grafting as a function of the polymerization medium, and initiator and monomer concentrations. It was found that the modified batch polymerization process yielded greater graft polymer formation and that graft copolymerization in aqueous alcohol medium resulted in enhanced levels of grafting and formation of many short grafted polymer chains. Viscosity measurements in aqueous solutions of carboxymethyl cellulose‐g‐polyacrylamide copolymer samples showed that interpositioning of polyacrylamide chains markedly increased the specific viscosity and resistance to biodegradation of the graft copolymers. The flocculation characteristics of the graft copolymers were determined with kaolin suspension. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 913–923, 2003     

Synthesis and properties of poly(imide siloxane) block copolymers with different block lengths

Several poly(imide siloxane) block copolymers with the same bis(γ‐aminopropyl)polydimethylsiloxane (APPS) content were prepared. The polyimide hard block was composed of 4,4′‐oxydianiline and 3,3′,4,4′‐diphenylthioether dianhydride (TDPA), and the polysiloxane soft block was composed of APPS and TDPA. The length of polysiloxane soft block increased simultaneously with increasing the length of polyimide hard block. For better understanding the structure–property relations, the corresponding randomly segmented poly(imide siloxane) copolymer was also prepared. These copolymers were characterized by FT‐IR, ¹H‐NMR, dynamic mechanical thermal analysis, thermogravimetric analysis, polarized optical microscope, rheology and tensile test. Two glass transition temperatures (T_g) were found in the randomly segmented copolymer, while three T_gs were found in the block copolymers. In addition, the T_gs, storage modulus, tensile modulus, solubility, elastic recovery, surface morphology and complex viscosity of the copolymers varied regularly with increasing the lengths of both blocks. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Degradation of poly(vinyl alcohol)‐graft‐lactic acid copolymers by Trichotecium roseum fungus

The biodegradation of poly(vinyl alcohol) and poly(vinyl alcohol)‐graft‐lactic acid copolymers was analyzed, using Trichotecium roseum fungus. The samples were examined during biodegradation at different periods of exposure. Structural modifications of the biodegraded samples were investigated by Fourier transform infrared‐attenuated total reflectance spectroscopy, and the surface morphology was investigated by scanning electron microscopy. The static light scattering results concluded that the weight average molecular mass (M_w) of the copolymers increased after biodegradation, because the fractions with low molecular weight of the copolymers were destroyed. The thermal behavior and stability of the samples before and after the biodegradation period were investigated by differential scanning calorimetry (DSC) and thermogravimetric analyses. The thermogravimetric analyses and their derivatives (TG‐DTG) showed that the thermal stability of the biodegraded samples was more raised comparatively to the unbiodegraded ones. The DSC results demonstrated that biodegradation took place in the amorphous domains of the investigated polymer samples and the crystallinity degree increased after 24 biodegradation days. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41777.     

Synthesis and properties of polystyrene‐b‐poly(ethylene oxide)‐b‐polystyrene triblock copolymers

A series of well‐defined and property‐controlled polystyrene (PS)‐b‐poly(ethylene oxide) (PEO)‐b‐polystyrene (PS) triblock copolymers were synthesized by atom‐transfer radical polymerization, using 2‐bromo‐propionate‐end‐group PEO 2000 as macroinitiatators. The structure of triblock copolymers was confirmed by ¹H‐NMR and GPC. The relationship between some properties and molecular weight of copolymers was studied. It was found that glass‐transition temperature (T_g) of copolymers gradually rose and crystallinity of copolymers regularly dropped when molecular weight of copolymers increased. The copolymers showed to be amphiphilic. Stable emulsions could form in water layer of copolymer–toluene–water system and the emulsifying abilities of copolymers slightly decreased when molecular weight of copolymers increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 727–730, 2006     

Synthesis of water‐soluble polyphenol‐graft‐poly(ethylene oxide) copolymers via enzymatic polymerization and anionic polymerization

Water‐soluble polyphenol‐graft‐poly(ethylene oxide) (PPH‐g‐PEO) copolymers were prepared using grafting‐through methodology. Polyphenol chains were synthesized via enzymatic polymerization of phenols, and the graft chains were synthesized via living anionic polymerization of ethylene oxides. The polymers were characterized using gel permeation chromatography, static light scattering and ¹H NMR, infrared and ultraviolet spectroscopies. The PPH‐g‐PEO graft copolymers are soluble in several common solvents, such as water, ethanol, N,N‐dimethylformamide, tetrahydrofuran and methylene dichloride. The solubility of the PPH‐g‐PEO graft copolymers is improved significantly compared with that of polyphenol. Copyright © 2009 Society of Chemical Industry     

Synthesis and characterization of poly(ether ketone ketone) (PEKK)/sodium sulfonated poly(arylene ether ketone) (S‐PAEK) block copolymers

A series of well‐defined poly(ether ketone ketone) (PEKK)/sodium sulfonated poly(aryl ether ketone) (S‐PAEK) block copolymers of high molecular weights was prepared by direct nucleophilic polymerization of hydroquinone with sodium 5,5′‐carbonylbis(2‐fluorobenzene sulfonate) ( 1 ) and PEKK oligomer ( 2 ). Varying the ratio of 1 to 2 used in polymerization can be used to control the degree of polymer sulfonation, which correspondingly affects the polymer solubility in solvents. Increasing content of 1 in the copolymers, slightly decreases their thermal stability which is nevertheless thermally stable up to 400 °C. Two T_g values, or one broad T_g, were observed in the DSC measurements of the block copolymers, indicating the existence of phase separation, which was further proved by phase‐separated morphologies as shown in atomic force microscopy images. © 2001 Society of Chemical Industry     

Synthesis and characterization of ABA‐type block copolymers of trimethylene carbonate and ϵ‐caprolactone

This paper describes the synthesis of a series of ABA‐type triblock copolymers of trimethylene carbonate and ?‐caprolactone with various molar ratios and analyses the thermal and mechanical properties of the resulting copolymers. The structures of the triblock copolymers were characterized by ¹H and ¹³C nuclear magnetic resonance spectroscopy, FT‐IR spectroscopy and gel permeation chromatography. Results obtained from the various characterization methods proves the successful synthesis of block copolymers of trimethylene carbonate and ?‐caprolactone. The thermal properties of the block copolymers were investigated by differential scanning calorimetry. The T_m and ΔH_m values of the copolymers decrease with increasing content of trimethylene carbonate units. Two T_gs were found in the copolymers. Furthermore, both of the T_g values increased with increasing content of trimethylene carbonate units. The mechanical properties of the resulting copolymers were studied by using a tensile tester. The results indicated that the mechanical properties of the block copolymers are related to the molar ratio of trimethylene carbonate and ?‐caprolactone in the copolymers, as well as the molecular weights of the resulting copolymers. The block copolymer with a molar composition of 50/50 possessed the highest tensile stress at maximum and modulus of elasticity. Block copolymers possessing different properties could be obtained by adjusting the copolymer compositions. Copyright © 2004 Society of Chemical Industry     

Thermal analysis,glass transition temperature and rheological behaviour of emulsion copolymers of methyl methacrylate with styrene

Poly(MMA‐ran‐St) samples were synthesized under monomer‐starved conditions (drop feeding method) by emulsion copolymerization. Their thermostability was determined by thermogravimetric analysis. The glass transition temperature (T_g) of the copolymers was determined by differential scanning calorimetry (DSC) and torsional braid analysis (TBA). The results showed that the MMA–St copolymers exhibit an asymmetric T_g versus composition curve, which could not be interpreted by Johnston's equation, taking the different contributions of the diads to the T_g of the copolymer into consideration. A new sequence distribution equation taking into account the different contributions of the triads was proposed to predict the copolymer T_g. The new equation fitted the experimental data exactly. The T_g determined by torsional braid analysis (TBA) is higher than the one determined by DSC, but the difference is not constant. The rheological behaviour of the copolymers was also studied and T_gTBA‐T_gDSC increased with the increasing flow index of the copolymer. © 2003 Society of Chemical Industry     

The effect of composition on the properties of nylon 612 copolymers

The series of nylon 612 copolymers was synthesized from caprolactam (C) and laurolactam (L) at 145°C. The 50/50 C/L molar ratio copolymer was found to have the minimum melting temperature (T_m ) for the series. The glass transition temperatures (T_g 's) of the copolymers were affected by the crystallinity of the copolymers. The T_g was at a minimum for the 50/50 copolymer for crystalline samples. However, for amorphous samples there was a decrease in T_g with increasing L content. Percent crystallinity was determined by differential scanning calorimetry and X-ray techniques. It was found that the degree of crystallinity was at a minimum for copolymers of 70/30 to 40/60 C/L ratios. Coefficients of linear thermal expansion (CLTE) were obtained for the copolymers at 10°C intervals from 20 to 70°C for dry and from 20 to 50°C for samples conditioned at 50% relative humidity and 50°C. The dry samples gave lower initial values, but had a greater temperature dependence than the conditioned samples. As expected, the CLTE was found to be lowest for samples exhibiting the highest crystallinity. The tensile strengths and moduli decreased rapidly with increasing L up to the 70/30 C/L ratio after which they remained relatively constant. Elongations reached maximums between 70/30 and 40/60 C/L ratios. An inverse relationship was found between crystallinity and impact strength.     

Improving oxygen barrier properties of poly(ethylene terephthalate) by incorporating isophthalate. I. Effect of orientation

The present study examined poly(ethylene terephthalate) (PET) and a series of statistical and blocky copolymers in which up to 30% of the terephthalate was replaced with isophthalate by copolymerization and melt blending, respectively. Some level of transesterification during processing of melt blends resulted in blocky copolymers, as confirmed by NMR. Random and blocky copolymers exhibited similar properties in the glassy state, including a single glass transition, due to miscibility of the blocks. However, random copolymerization effectively retarded cold‐crystallization from the glass whereas blocky copolymers readily cold‐crystallized to a crystallinity level close to that of PET. The polymers were oriented at four temperatures in the vicinity of the T_g and characterized by oxygen transport, wide‐angle X‐ray diffraction, positron annihilation lifetime spectroscopy, and infrared spectroscopy. Orientation of all the copolymers resulted in property changes consistent with strain‐induced crystallization. However, blocky copolymers oriented more easily than random copolymers of the same composition and after orientation exhibited slightly lower oxygen permeability, higher density, and higher fraction trans conformers. Analysis of oxygen solubility based on free volume concepts led to a two‐phase model from which the amount of crystallinity and the amorphous phase density were extracted. Dedensification of the amorphous phase correlated with the draw temperature. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1615–1628, 2005