Synthesis and characterization of novel poly(dimethylsiloxane)/polyindole composites

A series of composites of polyindole (PIN) and poly(dimethylsiloxane) (PDMS) were synthesized chemically using FeCl₃ as an oxidant agent in anhydrous media. The composites were characterized by FTIR and UV‐visible spectroscopies, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), scanning electron microscopy (SEM), X‐ray diffraction (XRD), elemental analysis, inductively coupled plasma‐optic emission spectroscopy (ICP‐OES), magnetic susceptibility, stress–strain experiments, and conductivity measurements. The conductivities of PIN at different temperatures were also measured and it was revealed that their conductivities were slightly increased with increasing temperature. Moreover, the freestanding films of PDMS/PIN composites were prepared by casting on glass Petri dishes to examine their stress–strain properties. From thermogravimetric analysis results it was found that PDMS/PIN composites were thermally more stable than PIN. Thermal stabilities of PDMS/PIN composites increased with increasing PIN content. It was found that the conductivities of PDMS/PIN composites depend on the indole content in the composites. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of poly(dimethylsiloxane)–polythiophene composites

The synthesis was performed by the electropolymerization of thiophene on a poly(dimethylsiloxane) (PDMS)‐coated platinum electrode at 2.2 V with tetrabutylammoniumtetrafloroborate (TBAFB) as a supporting electrolyte and with acetonitrile as a solvent. The characterization of the PDMS–polythiophene (Pth) composites was carried out with cyclic voltammetry, Fourier transform infrared (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis, and conductivity measurements. The observed conductivities of the PDMS composites were 2.2–5.2 S/cm. The conductivity of Pth did not change appreciably with the addition of up to 30% insulating PDMS, but its processability improved. FTIR, SEM, and DSC studies showed the existence of a strong interaction, rather than physical adhesion, between PDMS and Pth. Highly flexible and foldable PDMS–Pth composites were obtained. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2113–2119, 2003     

Structural,mechanical, and electrical properties of electropolymerized polypyrrole composite films

Electrochemical polymerization of pyrrole in a solution containing dissolved poly(vinyl alcohol) (PVA) produces a homogeneous, free‐standing, flexible, and conductive polymer film. The films were characterized using infrared spectroscopy, wide‐angle X‐ray diffraction analysis, and scanning electron microscopy. The appearance of standard and some new absorption bands for polypyrrole (PPy) and PVA confirms the composite formation. The mechanical properties of conducting PVA + PPy films were studied and found to be improved with respect to the control PPy films. The electrical conductivity of the PVA + PPy films was measured by using standard four‐ and two‐probe methods. The conductivity of the films was found to depend on the pyrrole content. These conducting composites were further used as gas sensors by observing the change in current with respect to ammonia gas. It was observed that the current decreases when these composites were exposed to ammonia gas. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 2511–2517, 2001     

One‐pot synthesis,characterization, and field emission investigations of composites of polypyrrole with graphene oxide,reduced graphene oxide,and graphene nanoribbons

Pyrrole monomer was polymerized by a chemical oxidative route in the presence of graphene oxide (GO), reduced GO (rGO), and graphene nanoribbons (GNR) separately to prepare composites of polypyrrole (PPy) as PPy–GO, PPy–rGO, and PPy–GNR, respectively. The morphological, chemical, and structural characterization of the as‐synthesized products was carried out using scanning electron microscopy, Raman spectroscopy, and Fourier transform infrared spectroscopy. Field emission studies of the PPy–GO, PPy–rGO, and PPy–GNR emitters were performed at the base pressure of 1 × 10^?8 mbar in a planar “diode” configuration. The turn‐on field values, corresponding to an emission current density of 1 µA/cm², are observed to be 1.5, 2.2, and 0.9 V/µm for the PPy–GO, PPy–rGO, and PPy–GNR emitters, respectively. The maximum emission current density of 2.5 mA/cm² is drawn from PPy–GO at an applied electric field of 3.2 V/µm, 1.2 mA/cm² at 3.6 V/µm from the PPy–rGO, and 8 mA/cm² at 2.2 V/µm from the PPy–GNR emitters. All of the composites exhibit good emission stability over more than 2 h. The results indicate the potential for a facile route for synthesizing composites of conducting polymers and graphene‐based materials, with enhanced functionality. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45170.     

Preparation and characterization of electrospun polyurethane–polypyrrole nanofibers and films

Polyurethane (PU)–polypyrrole (PPy) composite films and nanofibers were successfully prepared for the purpose of combining the properties of PU and PPy. Pyrrole (Py) monomer was polymerized and dispersed uniformly throughout the PU matrix by means of oxidative polymerization with cerium(IV) [ceric ammonium nitrate Ce(IV)] in dimethylformamide. Films and nanofibers were prepared with this solution. The effects of the PPy content on the thermal, mechanical, dielectric, and morphological properties of the composites were investigated with differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), Fourier transform infrared (FTIR)–attenuated total reflection (ATR) spectroscopy, dielectric spectrometry, and scanning electron microscopy. The Young's modulus and glass-transition temperatures of the composites exhibited an increasing trend with increases in the initially added amount of Py. The electrical conductivities of the composite films and nanofibers increased. The crystallinity of the composites were followed with DSC, the mechanical properties were followed with DMA, and the spectroscopic results were followed with FTIR–ATR spectroscopy. In the composite films, a new absorption band located at about 1650 cm⁻¹ appeared, and its intensity improved with the addition of Py. The studied composites show potential for promising applications in advanced electronic devices. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of acrylic rubber/silica hybrid composites prepared by sol‐gel technique

The organic–inorganic hybrid composites comprising acrylic rubber and silica were synthesized through sol–gel technique at ambient temperature. The composites were generated through the acid‐catalyzed hydrolysis and subsequent condensations of inorganic tetraethoxysilane (TEOS) in the organic acrylic rubber (ACM), solvated in tetrahydrofuran. The morphology of the hybrid materials was investigated by using the transmission electron microscope (TEM) and scanning electron microscope (SEM). Transmission electron micrographs revealed that the silica particles, uniformly distributed over the rubber matrix, are of nanometer scale (20–90 nm). The scanning electron micrographs demonstrated the existence of silica frameworks dispersed in the rubber matrix of the hybrid composites. The X‐ray silicon mapping also supported that observation. There was no evidence of chemical interaction between the rubber phase and the dispersed inorganic phase, as confirmed from the infrared spectroscopic analysis and solubility measurements. Dynamic mechanical analysis indicated mechanical reinforcements within the hybrid composites. The composites containing in situ silica, formed by sol–gel technique, demonstrated superior tensile strengths and tensile modulus values at 300% elongations with increasing proportions of tetraethoxysilane. However, the improvements in physical properties with similar proportions of precipitated silica were not significant. Maximum tensile strength and tensile modulus were obtained when the rubber phase in the hybrid composites was cured with ammonium benzoate and hexamethylenediamine carbamate system, as compared with benzoyl peroxide cured system. Thermal stability of the hybrid composites was not improved appreciably with respect to the virgin rubber specimen. Residue analysis from thermogravimetric study together with infrared spectroscopic analysis indicated the presence of unhydrolyzed tetraethoxysilane in the hybrid composites. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2579–2589, 2004     

Microstructure and mechanical properties of a polyethylene/polydimethylsiloxane composite prepared using supercritical carbon dioxide

A polymer composite of polyethylene (PE) and polydimethylsiloxane (PDMS) was prepared using supercritical carbon dioxide despite the two polymers usually being immiscible and possessing a phase‐separated morphology. This article reports in detail the preparation, microstructure, crystallinity, and mechanical properties of the resulting PE/PDMS composite. The formation mechanism of the PE/PDMS composite consisted of supercritical impregnation of an octamethylcyclotetrasiloxane (D4) monomer and an initiator into a PE substrate followed by in situ polymerization within the substrate. Differential scanning calorimetry, wide‐angle X‐ray diffraction, and small‐angle X‐ray scattering measurements showed that PE and PDMS were blended at the nanometer level. The PDMS generated in the amorphous region of PE did not affect its crystallinity. Dynamic viscoelastic analyses and tensile tests were used to measure the mechanical properties of the composites including storage and Young's modulus, fracture stress, and strain. These properties were found to depend on the composition of the composite. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Polymeric curing agent reinforced silicone rubber composites with low viscosity and low volume shrinkage

A new type of polymeric curing agent (PCA) was synthesized to improve processing property, increase mechanical properties, and decrease volume shrinkage of silicone rubber. The PCA was prepared by co‐hydrolysis condensation of dimethyldiethoxysilane (DDS) and polyethoxysiloxane, then modified by hexamethylcyclotrisilazane (D₃^N). Commercial silica and tetraethoxysilane (TEOS) were used as controls simultaneously. The properties of polydimethylsiloxane (PDMS) composites were characterized by shear viscosity measurements, room temperature mass loss, linear volume shrinkage, stress‐strain tests, swelling behaviors and thermogravimetric analysis (TGA). PDMS composites using PCA show lower shear viscosity than those using commercial silica. Compared with the traditional PDMS/TEOS curing systems, PDMS/PCA curing systems behave relatively lower volume shrinkage, better reinforcement and thermal properties. In short, PCA acts as a good compromise in providing the best balance of processing property, volume shrinkage, mechanical properties and thermal stability in silicone rubber composites. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Polyhedral oligomeric silsesquioxane/silica/polydimethylsiloxane rubber composites with enhanced mechanical and thermal properties

Composites of polydimethylsiloxane (PDMS) rubber modified by three kinds of polyhedral oligomeric silsesquioxanes (POSSs) as well as fumed silica were prepared through solution blending and then open two‐roll mill blending with curing agent. Subsequently, the influences of POSS on mechanical and thermal properties of the resulting composites were investigated in detail. The addition of POSS significantly enhanced the tensile strength and elongation at break of the composite but lowered the tensile modulus, which could be ascribed to the interruption of silica–silica and silica–PDMS interactions. Octamethylsilsesquioxane (OMS)/silica/PDMS and octaphenylsilsesquioxane (OPS)/silica/PDMS composites did not show desirable mechanical and thermal properties. Nevertheless, heptaphenylvinylsilsesquioxane (VPS)/silica/PDMS composite with 5 wt % VPS exhibited enhanced glass transition temperature (T_g), mechanical properties, and thermal stability. Further studies revealed that more VPS unfavorably affected properties of the composite. Scanning electron microscope and X‐ray diffraction demonstrated that owing to the grafting reaction, 5 wt % VPS in the rubber matrix could form microcrystal domains the most effectively. Thus, the improved mechanical properties and thermal stability just resulted from the the formation of microcrystal domains and the increase in stiffness of PDMS chains because of the graft of VPS onto PDMS. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42173.     

Conversion of pencil graphite to graphene/polypyrrole nanofiber composite electrodes and its doping effect on the supercapacitive properties

Graphene platelets were synthesized from pencil flake graphite and commercial graphite by chemical method. The chemical method involved modified Hummer's method to synthesize graphene oxide (GO) and the use of hydrazine monohydrate to reduce GO to reduced graphene oxide (rGO). rGO were further reduced using rapid microwave treatment in presence of little amount of hydrazine monohydrate to graphene platelets. Chemically modified graphene/polypyrrole (PPy) nanofiber composites were prepared by in situ anodic electropolymerization of pyrrole monomer in the presence of graphene on stainless steel substrate. The morphology, composition, and electronic structure of the composites together with PPy fibers, graphene oxide (GO), rGO, and graphene were characterized using X‐ray diffraction (XRD), laser‐Raman, and scanning electron microscopic (SEM) methods. From SEM, it was observed that chemically modified graphene formed as a uniform nanocomposite with the PPy fibers absorbed on the graphene surface and/or filled between the graphene sheets. Such uniform structure together with the observed high conductivities afforded high specific capacitance and good cycling stability during the charge–discharge process when used as supercapacitor electrodes. A specific capacitance of supercapacitor was as high as 304 F g^?1 at a current density of 2 mA cm^?1 was achieved over a PPy‐doped graphene composite. POLYM. ENG. SCI., 55:2118–2126, 2015. © 2014 Society of Plastics Engineers     

Electroconductive and catalytic performance of polypyrrole/montmorillonite/silver composites synthesized through in situ oxidative polymerization

The present study demonstrates a simple approach to the formation of polypyrrole/montmorillonite/silver (PPy/Mt/Ag) composites via in situ oxidative polymerization of pyrrole (Py) in the presence of AgNO₃ acting as a direct oxidant. The polymerization was performed in the presence of dodecylbenzenesulfonic acid, which acts as a stabilizing and doping agent. The morphological, structural, and thermal properties of PPy/Mt/Ag composites are discussed in detail and a possible formation mechanism is proposed. The electrical conductivities of the composites pressed at different pressing pressures were investigated using four‐probe analyzer. X‐ray diffraction, transmission electron microscopy, and scanning electron microscopy results indicated the partially exfoliated structure of the composites and Fourier transforms infrared results suggested the strong interactions between Si? O? Si groups in Mt and N? H groups in PPy chains. The addition of Mt in the PPy polymer enhanced thermal property of the polymer. The conductivity of 1.08 S cm^?1 was observed in the sample with 20 wt % Mt loading and applied pressure of 5 MPa. The composites obtained in the present study catalyze the reduction of methylene blue by sodium borohydride, achieving 92% conversion of MB to colorless within a few minutes. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45986.     

Preparation and properties of poly(dimethyl siloxane)–colloidal silica/functionalized colloidal silica nanocomposites

Aqueous spherical colloidal silica (CS) particles with a diameter of 15 ± 5 nm were modified with three different types of monofunctional silane coupling agents to prepare functionalized colloidal silica (FCS) particles. The effects of the surface chemistry of the FCS were studied as a function of the CS/FCS loading in the poly(dimethyl siloxane) (PDMS) polymer. The prepared PDMS–CS/FCS composites were investigated for their physical properties both in the cured and uncured states. The extent of filler–filler and filler–polymer interactions was found to vary with the type of functionalizing agent used to treat the surface of the CS. The filler–filler interaction appeared to be predominant in the PDMS–CS composites, and improved filler–polymer interaction was indicated in the case of the PDMS–FCS composites. The composites containing CS treated with methyltrimethoxysilane exhibited relatively better optical and mechanical properties compared to the other PDMS–FCS composites. This study highlighted the importance of judiciously choosing functionalizing agents to achieve PDMS–FCS composites with predetermined optical and mechanical properties. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and Characterization of a Graphene Oxide Film Modified by the Covalent Attachment of Polysiloxane

Hybrid materials consisting of polydimethylsiloxane (PDMS) and polycyclohexyl-methylsiloxane (PCHMS) grafted graphene oxide (GO) were obtained by condensation polymerization in toluene. Fourier transform infrared spectroscopy indicates that the composites were synthesized through the formation of Si-O bond. The X-ray diffraction, scanning electron microscopy and thermogravimetric indicate that the hydrolysis polycondensation can accelerate the graft reaction. The hybrid films were prepared by simple filtration of the dispersed system of PDMS/GO/water, PCHMS/GO and PCHMS/GO/water in dimethylformamide. Tensile tests indicate the mechanical properties of the films varied with their structure. The rigid PCHMS/GO/water films have a tensile strength of 17.83 MPa, and the pliant PDMS/GO/water films have an elongation at break of 3.14%. UV-Vis spectra of GO and the hybrids indicate that the addition of polysiloxane caused a red-shift (10–20 nm) of the absorption peak.     

Synthesis and characterization of nanosized polypyrrole–polystyrene composite particles

Nanosized polypyrrole–polystyrene (PPy–PS) composite particles were synthesized by the polymerization of pyrrole on PS nanoparticles in the presence of FeCl₃. The PS nanoparticles were prepared from microemulsion polymerizations using the cationic nonpolymerizable surfactant cetyltrimethylammonium bromide (CTAB), the nonionic polymerizable surfactant ω‐methoxy[poly(ethylene oxide)₄₀]undecyl α‐methacrylate (PEO–R–MA‐40), or the cationic polymerizable surfactant ω‐acryloyloxyundecyltrimethylammonium bromide (AUTMAB). For the latexes stabilized by CTAB, the resulting PPy–PS composite particles exhibited relatively poor colloidal stability and the pressed pellets exhibited relatively low electrical conductivities (～10^?7–10^?3 S cm^?1). However, for the latexes stabilized by polymerizable surfactants, the resulting PPy–PS composite particles exhibited relatively good colloidal stability and relatively high conductivities (～10^?5–10^?1 S cm^?1). The effect of polymerizable surfactants on the colloidal stability of composite particles and the conducting mechanism of the composites are discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1360–1367, 2004     

Synthesis and characterization of novel polyfuran/poly(2‐iodoaniline) conducting composite

The electrically conducting polyfuran/poly(2‐iodoaniline) (PFu/P2IAn) and P2IAn/PFu composites were prepared by chemical oxidative polymerization using polyfuran and poly(2‐iodoaniline) in HCl and CHCl₃ media. The conductivities of composites were determined as a function of the amount of guest polymer. It was found out that the conductivities of P2IAn/PFu composites increased 100‐fold, whereas the conductivities of PFu/P2IAn composites did not show a specific increase. The composite compositions were altered by varying guest polymer feed ratios during preparation. Generally, the electrical conductivities of P2IAn/PFu composites increased with increasing the amount of PFu. Homopolymers and composites were further characterized thermally, employing thermogravimetry (TGA) and morphologically employing scanning electron microscopy (SEM). Further evidences concerning the polymer structures were obtained by FTIR and UV‐vis spectroscopies and magnetic susceptibility measurements. TGA results revealed that PFu/P2IAn among the homopolymers (PFu and P2IAn) and P2IAn/PFu composite have the highest thermal stability. The composites synthesized varying the host and the guest polymer order have different conductivities, morphological structures, and thermal properties. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2823–2830, 2003     

Dynamic mechanical properties of the chemical oxidation on UHMWPE fibers for improved adhesion to epoxy resin matrix

The improved adhesion of an ultrahigh molecular weight polyethylene (UHMWPE) fiber to an epoxy from applying polypyrrole (PPy) was investigated using chemical oxidation polymerization. The interfacial shear strength of the PPy-treated fiber/epoxy was enhanced by 280%. Such an improvement was verified in the previous research using a pull-out test. Dynamic mechanical analysis (DMA) and a morphological examination were performed to evaluate the characteristics of the molecular motions of the UHMWPE fiber/PPy/epoxy composites. Two composite materials, a UHMWPE fiber/PPy and a UHMWPE fiber/PPy/epoxy, were tested by DMA. The results show that both the α_c transitions of the PPy-treated fibers and its composites shift toward higher temperature. In the SEM photos of the UHMWPE fiber/PPy, a very clear roughening effect on the surface of PPy-treated UHMWPE fiber was also observed, which contributes much to the modification of the interface to the epoxy. The results show that an adhesion improvement mechanism for the PPy-treaded UHMWPE fiber is due to the surface roughening effect and the intermolecular interaction. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1387–1395, 1998     

Electrical conductivity studies on water‐soluble polypyrrole–graphene oxide composites

Polypyrrole (PPy)–graphene oxide (GO) composites are synthesized via a soft‐chemical in situ method at different GO concentrations (10, 20, 30, 40, and 50 wt%) and with ammonium persulfate (APS) as the oxidant. The synthesized composites were characterized using Fourier transform infrared (FTIR) and ultraviolet‐visible light (UV–vis) spectroscopic studies, and their surface properties were analyzed using scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Characterization and surface morphology results indicate that PPy is adsorbed onto the graphene surfaces and/or fills the GO sheets. The temperature‐dependent DC conductivity of the polymer composite films in the 300–500 K range indicates a semiconducting behavior with increasing GO concentration in the PPy polymer. Based on morphological and conductivity studies, the large surface area and high aspect ratio of the in situ‐generated GO may have played an important role in the noticeable improvement in the electrical conductivity of the prepared composites. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Mechanical and film formation behavior from PDMS/NaY zeolite composite membranes

In this study, polydimethylsiloxane (PDMS) and NaY zeolite doped composite membranes were prepared for the films varying from 0 to 15 NaY zeolite wt %. All the membranes were characterized by attenuated total reflectance–Fourier transform infrared (FTIR), X-ray diffraction, scanning electron microscopy, thermogravimetry/differential thermal analysis methods. The FTIR spectral results showed that there is physical interaction existing between the PDMS matrix and NaY zeolite. Additionally, film formation from the pure PDMS and PDMS/NaY composites were investigated by photon transmission technique. Activation energies corresponding to the void closure and the interdiffusion stages were calculated. The NaY zeolite added films led to the significant improvement in the mechanical properties that both the tensile strength and Young's modulus increased three times. Thermal properties of the films were also investigated and the addition of NaY zeolite into the PDMS matrix could significantly improve the thermal stability of the composite membranes. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48549.     

Mechanical,dielectric, and thermal properties of polydimethylsiloxane/polysilsesquioxane nanocomposite for sealant application

Polysilsesquioxanes (PS) powder was synthesized from methyltrimethoxysilane and vinyltrimethoxysilane by hydrolytic condensation method in aqueous phase. The prepared PS powder was characterized using Fourier transform infrared spectroscopy, particle size, and polydispersity of the powders was determined using dynamic light scattering technique. Polydimethylsiloxane (PDMS) nanocomposites and the sealant were synthesized using different weight percentage (1–4 wt %) of PS powder and hydrophobic fumed silica. Tensile strength and thermal stability of the nanocomposites showed perceptible enhancement on increasing the filler ratio when compared to pristine PDMS composites. The surface morphology and the extent of filler dispersion were visualized from the scanning electron microscopy images. Dielectric strength of the composites also showed significant improvement on increasing the filler loading. Poly(methyl/vinyl)silsesquioxane (PMVS) (4 wt %) reinforced composites showed a considerable enrichment in properties when compared to other formulations. Adhesive strength of silicone sealant on both the alumina and mild steel substrate was studied by conducting lap shear test. PMVS-loaded nanocomposites exhibited more adhesive strength on both the substrates and hence it can be used as a sealant in electronic assemblies. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47228.     

Synthesis and properties of conducting polypyrrole,polyalkylanilines, and composites of polypyrrole and poly(2‐ethylaniline)

Conducting polymers of alkylanilines, pyrrole, and their conducting composites were synthesized by oxidation polymerization. The oxidants used were KIO₃ and FeCl₃ for the polyalkylanilines and polypyrrole (PPy), respectively. Among the polyalkylanilines synthesized with KIO₃ salt, the highest conductivity was obtained with poly(2‐ethylaniline) (P2EAn) with a value of 4.10 × 10^?5 S/cm. The highest yield was obtained with poly(N‐methylaniline) with a value of 87%. We prepared the conducting composites (PPy/P2EAn and P2EAn/PPy) by changing synthesis order of P2EAn and PPy. The electrically conducting polymers were characterized by IR spectroscopy, ultraviolet–visible spectroscopy, thermogravimetric analysis, and X‐ray diffraction spectroscopy. From the results, we determined that the properties of the composites were dependent on the synthesis order of the polymers. The thermal degradation temperature of PPy was observed to be higher than that of the other polymers and composites. We determined from X‐ray results that the structures of the homopolymers and composites had amorphous regions (88–95%) and crystal regions (5–12%). From the Gouy balance magnetic measurements, we found that the polymers and composites were bipolaron conducting mechanisms. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 241–249, 2006