Hemocompatibility of polymers for use in vascular endoluminal implants

Implanted polymers for cardiovascular applications may function as structural supports, barriers, or provide a means for local drug delivery. Several thermoplastic biodegradable drug delivery polymers are potential candidates for blood-contacting implant applications. For intravascular applications specifically, a criterion for material selection is the intrinsic hemocompatibility of the baseline polymer. As an initial screening approach for selection of polymers for in vivo use, thin films of polyesters: poly(ɛ-caprolactone) (PCL), poly(lactic acid) (PLA), poly(lactic-co-glycolic acid) (PLGA); polyanhydrides: poly(fatty acid dimer-co-sebacic acid) (PFAD:SA) and poly(biscarboxyphenoxypropane-co-sebacic acid) (PCPP:SA); and poly(ethylene glycol) (PEG)-ylated polyesters: PLA:PEG, PCL:PEG and PCL:PLA:PEG polymers were spin-cast on glass cover slips and placed in an in vitro flow system exposing them at a controlled shear to overflowing human whole blood. Platelet adherence, aggregate formation, and thrombus formation, as well as leukocyte adherence were assessed following 5 min of flow. At 5 min of flow the rank order of materials, in terms of least to most thrombogenic was: PCL < PFAD:SA < PCPP:SA < PLGA < PLA. All PEGylated materials, in general, had less thrombus formation than baseline unmodified materials.     

Development of polylactide microspheres for protein encapsulation and delivery

The development of injectable microparticles for protein delivery is a major challenge. We demonstrated the possibility of entrapping human serum albumin (HSA) and thrombin (Thr) in poly(ethylene glycol) (PEG)‐coated, monodisperse, biodegradable microspheres with a mean diameter of about 10 μm. In our earlier studies, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis was used to characterize the surface of PEG‐coated, taxol‐loaded poly(lactic acid) (PLA) microspheres. An analysis by DRIFTS revealed that PEG was incorporated well on the PLA microsphere surface. An emulsion of protein (in water) and PLA dissolved in an acetone–dichloromethane (or acetone–chloroform) mixture were poured into an aqueous solution of PEG [or poly(vinyl alcohol) (PVA)] with stirring with a high‐speed homogenizer for the formation of microparticles. HSA recovery in microspheres ranged from 13 to 40%, depending on the solvent and emulsification systems used for the preparation. PLA dissolved in a dichloromethane/acetone system and albumin loaded via a PEG emulsification solution (PLA–PEG–HSA) showed maximum drug recovery (39.5%) and drug content (9.9%). Scanning electron microscopy revealed that PEG‐coated microspheres had less surface micropores than PVA‐based preparations. The drug‐release behavior of microspheres suspended in phosphate‐buffered saline exhibited a biphasic pattern. An initial burst release (30%) followed by a constant slow release for 20 days was observed for HSA and Thr from PLA–PEG microspheres. PEG‐coated PLA microspheres show great potential for protein‐based drug delivery. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1285–1295, 2002     

The effect of solvent mixture on the properties of solvent cast polylactic acid (PLA) film

The objective of this study was to investigate the effects of various solvents on the crystallinity and thermal expansion stability of PLA film. Three different PLA films were produced by the solvent casting technique; PLA in chloroform (PLA‐C), PLA in methylene chloride (PLA‐M), and PLA in methylene chloride: acetonitrile = 50: 50 (PLA‐MA). The PLA‐MA had higher % crystallinity, 46.15, than the PLA‐C, 24.03, and the PLA‐M, 14.25. With this increase in crystallinity, the PLA‐MA had improved thermal expansion stability as shown by very low accumulated dimensional changes at 20 to 100°C. Wide‐angle X‐ray diffraction identified multiple crystalline structures for the PLA‐MA. Film barrier properties were also measured. PLA‐MA had the lowest oxygen permeability. However, there was no significant difference in water vapor permeability among the three PLA films. The mechanical property tests revealed that the PLA‐C and PLA‐M were ductile while the PLA‐MA was brittle in behavior. The PLA‐MA was very hazy as compared with the PLA‐C and PLA‐M. This work has shown that the PLA‐MA had increased % crystallinity and, more importantly, it had improved thermal expansion stability which can be very beneficial for the flexible packaging industry. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Kinetics of water absorption and thermal properties of poly(lactic acid)/organomontmorillonite/poly(ethylene glycol) nanocomposites

Poly(lactic acid) (PLA)/organomontmorillonite (OMMT) nanocomposites were prepared by a melt intercalation technique. The effects of OMMT and poly(ethylene glycol) (PEG) on the thermal properties and water absorption behavior of PLA were investigated. The melting temperature and degree of crystallinity were comparable for the PLA and its nanocomposites. The glass transition temperature and crystallization temperature of PLA were decreased by the addition of PEG. X‐ray diffraction results revealed the formation of PLA nanocomposites, as the OMMT was partly intercalated and partly exfoliated. The maximum moisture absorption of PLA was increased in the presence of PEG and the diffusivity of the PLA nanocomposites decreased with increasing concentrations of PEG. However, the activation energy of the nanocomposites increased as the loading of PEG increased. These results indicated that the incorporation of OMMT and PEG enhanced the water‐barrier properties of the PLA. J. VINYL ADDIT. TECHNOL., 2011. © 2011 Society of Plastics Engineers     

Paclitaxel-loaded PLA/PEG/fluorescein anticancer agent prepared by Ugi reaction

Two different fluorescent block copolymers of poly(lactic acid) (PLA) and polyethylene glycol (PEG) containing fluorescein grafted to the polymer chain were synthesized by Ugi four-component condensation (UFCC). The structure of these PEG–PLA copolymers was confirmed by ¹H-NMR and fluorescence spectroscopy. Paclitaxel-loaded fluorescent microspheres (PCT-FMS1 and PCT-FMS2) were prepared from them by the single-emulsion solvent evaporation method. A kinetic study of drug release in vitro using high-performance liquid chromatography showed a prolonged and controlled release of paclitaxel. Anticancer activity of release medium against colorectal cancer cell line (Caco-2) was determined using the cell viability assay. Paclitaxel-loaded microspheres were able to inhibit cancer cell growth and colony formation. The main contribution of this work is to propose a new application for UFCC in the preparation of biomasked fluorescent drug delivery systems able to improve cancer treatment.     

Preparation and characterization of poly(lactic acid)/poly(ethylene oxide) blend film: effects of poly(ethylene oxide) and poly(ethylene glycol) on the properties

Poly(lactic acid) (PLA) film plasticized with poly(ethylene oxide) (PEO) at various weight percentages (1–5 wt%) was prepared to improve the elongation, thus overcoming the inherent brittleness of the material. After optimization of the amount of PEO (4 wt%) through mechanical analysis, poly(ethylene glycol) (PEG), a well‐established plasticizer of PLA, was added (0.5–1.5 wt%) without hampering the transparency and tensile strength much, and again its amount was optimized (1 wt%). Neat PLA and PLA with the other components were solvent‐cast in the form of films using chloroform as a solvent. Improvement in elongation at break and reduction in tensile strength suggested a plasticizing effect of both PEO and PEG on PLA. Thermal and infrared data revealed that the addition of PEO induced β crystals in PLA. Scanning electron micrographs indicated a porous surface morphology of the blends. PEO alone in PLA exhibited the best optical clarity with higher percentage crystallinity, while PEG incorporation in PLA/PEO resulted in superior barrier properties. Also, the stability of the blends under a wide range of pH means prospective implementation of the films in packaging of food and non‐food‐grade products. © 2018 Society of Chemical Industry     

Properties of linear poly(lactic acid)/polyethylene glycol blends

Poly(lactic acid) (PLA) has great potentials to be processed into films for packaging applications. However, film production is difficult to carry out due to the brittleness and low melt strength of PLA. In this investigation, linear PLA (L‐PLA) was plasticized with poly(ethylene glycol) (PEG) having MW of 1000 g mol^?1 in various PEG concentrations (0, 5, 10, 15, and 20 wt%). In relation to plasticizer content, the impact resistance and crystallinity of L‐PLA was increased, whereas a decrease in glass transition temperature and lower stiffness was observed. Nevertheless, the phase separation has been found in samples which contained PEG greater than 10 wt%. The dynamic and shear rheological studies showed that the plasticized PLA possessed lower viscosity and more pronounced elastic properties than that of pure PLA. Both storage and loss moduli decreased with PEG loading at all frequencies while storage modulus exhibited weak frequency dependence with increasing PEG content. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

膜乳化法与复乳法结合制备粒径均一的载溶菌酶微胶囊

采用微孔膜乳化法与复乳法结合制备粒径均一可控的以聚乳酸和聚(乳酸-羟基乙酸)共聚物为膜材的载溶菌酶微胶囊,粒径分布系数CV(Coefficient of Variation)为14.04%,远低于机械搅拌法制备的微囊的CV(76.54%). 分别加入内水相添加剂PVA, PEG400, HP-b-CD,使溶菌酶的包埋率从无添加剂时的68.1%分别增大到86.6%, 89.0%和94.1%. 添加剂降低了溶菌酶的突释. PEG400, PEG6000, HP-b-CD的加入降低了溶菌酶的释放速率,而PVP或PVA的加入则加快了溶菌酶的释放. 溶菌酶在油水界面上的吸附变性是失活的主要原因. 在酶液中加入PEG400, PEG6000, PVP, HP-b-CD可有效地避免由于油水界面造成的溶菌酶活性的损失.     

Barrier properties of poly(lactic acid) and its morphological changes induced by aroma compound sorption

The barrier properties of poly(lactic acid) (PLA) play a key role in food packaging applications. For their optimization, the influence of crystallinity on the barrier properties of PLA and the interaction of PLA with the aroma compound ethyl acetate were investigated. PLA film samples with various crystallinities were fabricated by flat die extrusion and thermocompression and compared to PLA Biophan^?. The degree of crystallinity had no effect on the oxygen permeability. However, an increase of crystallinity caused a decrease in ethyl acetate sorption. The sorption isotherm of ethyl acetate obtained using microgravimetry showed a steep increase with increasing aroma activity, a form which is consistent with a plasticization effect. This behaviour was verified using differential scanning calorimetry and dynamic mechanical analysis. Sorption caused a marked decrease in the glass transition temperature well below room temperature to approximately 0 °C. Furthermore, PLA underwent a solvent‐induced crystallization when equilibrated in ethyl acetate atmosphere at an activity of 0.5. The results obtained show the importance of considering possible interactions between polymer and foodstuff during the optimization step of polymeric materials for food packaging applications. Copyright © 2010 Society of Chemical Industry     

Controlled release of methylene blue from layer-by-layer assembled chitosan/polyacrylic acid

Abstract

The electrostatic layer-by-layer (LbL) assembled multilayer films were widely used in the biomedical technology such as drug delivery. In this work, loading capabilities and release behavior of the multilayer films chitosan (Cts) and poly(acrylic acid) (PAA) were studied. The multilayer films were assembled by LbL technique through alternating deposition of Cts and PAA on glass slides, using methylene blue (MB) as a model drug. All the results showed that the LBL film’s loading and release efficiency greatly controllable by pH and ionic strength of the solution. It suggested that the Cts/PAA LBL film had potential applications in drug delivery and controlled release studies.     

A Novel of Biodegradable Implants Based on PLGA for Control Delivery of Cisplatin

A novel controlled drug delivery micro-device was successfully prepared with biodegradable implants based on PLGA by solvent evaporation method. The micro-chambers were fabricated using the UV-LIGA technology. The controlled release process resulted from the design of the micro-chambers and the characteristics of biodegradable polymers. Implant bioactivity was tested using in vitro and in vivo release. The implants kept good shape and cisplatin was homogeneous loaded in the PLGA implants. The precast implants appeared hexagon. With different proportion of PLA and PGA segment, the swelling behavior and the hydrolytic degradation rate of implants became lower due to the increase of PLA hydrophobic segment. In vitro and in vivo drug release behavior was studied using cisplatin as model drug, the implants could control the diffusion of cisplatin. The results demonstrated that this type of controlled drug delivery micro-device could be more potential application in tumor therapy.     

Development and characterization of photopolymerizable biodegradable materials from PEG-PLA-PEG block macromonomers

As tissue engineering and drug delivery applications increase in both number and complexity, the demand for new synthetic biocompatible polymers with precisely tailored properties grows accordingly. Block copolymers are a particularly promising biomaterial as the physical and physiological properties of these polymers can be closely controlled through manipulation of the type and organization of the blocks in the polymer's backbone. In this work, poly(ethylene glycol) (PEG) and poly(lactic acid) (PLA) were incorporated into PEG-PLA-PEG block macromonomers with (meth)acrylate functionality to form photopolymerizable, highly cross-linked polymers for potential use in a variety of biomedical applications. Simply by directing the PLA:PEG ratio in these macromonomers, the hydrophobicity, physical behavior, degradation, and biocompatibility of the resulting polymer were controlled. Specifically, it was found that by increasing the PLA:PEG ratio, the degree of water uptake and the mechanical strength of the material is significantly decreased, while the glass transition temperature and degradation of the PEG-PLA polymers are delayed. Additionally, the biocompatibility of the PEG-PLA polymers is significantly influenced by the chemical composition of the material as increased PLA generally yields greater cell compatibility. By demonstrating the versatility of the photopolymerizable PEG-PLA polymers, the results of this study indicate that these materials have the potential to serve as a synthetic biomaterial platform, in which the properties of the polymer can be tailored to a variety of tissue engineering or drug delivery applications.     

Influence of folate conjugation on the cellular uptake degree of poly(allylamine hydrochloride) microcapsules

The microcapsules in drug delivery systems can prevent degradation of drugs and help to control the release rate. To enhance the targeted delivery effect of the microcapsules to cancer cells, some specific ligands such as folic acid (FA) are necessarily further conjugated. Herein, covalent poly(allylamine hydrochloride) (PAH) multilayers were fabricated on CaCO₃ microparticles under the cross‐linking of glutaraldehyde, which were further immobilized with different amount of FA molecules via the spacer of diamino terminated poly(ethylene glycol) (PEG). As a comparison study, four types of microcapsules, i.e., the PAH capsules, the PAH capsules grafted with PEG, and the PAH capsules conjugated with two different amount of FA via the PEG spacer were prepared. Their chemical and physical structures were confirmed by infrared spectroscopy, UV–vis spectroscopy and scanning electron microscopy. In vitro cell culture found that the cellular uptake of the PAH capsules grafted with PEG was reduced significantly compared with that of the pure PAH capsules. The FA‐modified microcapsules could be selectively delivered into HepG2 tumor cells which overexpress FA receptors but not into the endothelial cells. The number of HepG2 cells which ingested the FA‐conjugated capsules showed a positive correlation with FA amount. The results indicate that these FA conjugated capsules have a high selectivity to be delivered to tumor cells, endowing them with a larger opportunity functioning as targeted delivery vehicle for anticancer drugs. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Preparation of polyethersulfone–alginate microcapsules for controlled release

In this study, polyethersulfone (PES)–alginate microcapsules were prepared for drug‐controlled release, and vitamin B₁₂ (VB₁₂), rifampicin (RFP), and bovine serum albumin (BSA) were used as model drugs. Different microcapsules were prepared by the variation of the crosslinking degree of alginate and the variation of the chemical components of the microcapsule membrane, including the PES and polyethylene glycol (PEG) contents. Systematic experiments were carried out to study their influences on the release profile of the model drugs. The results showed that with the increase of the crosslinking degree of the alginate, the drug release rate increased; whereas with the increase of the PES concentration used to prepare the microcapsule membrane, the drug release rate decreased. The contents of the PEG in the microcapsule membrane also affected the drug release. This study enriched the methodology of the fabrication of the microcapsules, and the microcapsules may have a potential use for controlled release. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and drug‐release behavior of 5‐fluorouracil‐loaded poly(lactic acid–4‐hydroxyproline–polyethylene glycol) amphipathic copolymer nanoparticles

Poly(lactic acid–4‐hydroxyproline–polyethylene glycol) (PLA–Hpr–PEG) was synthesized via melt copolymerization with stannous chloride as a catalyst activated by a proton acid. Copolymers with different poly(ethylene glycol) (PEG) concentrations (0.1, 0.5, 1, and 5 wt %) were synthesized and exhibited moderate molecular weights (weight‐average molecular weight = 9705–13,600 g/mol) and reasonable molecular weight distributions (weight‐average molecular weight/number‐average molecular weight = 1.35– 1.66). The structure of the polymers was verified with infrared spectroscopy and proton nuclear magnetic resonance spectroscopy. The nanoparticles were made by the nanoprecipitation method with PLA–Hpr–PEG. The size and size distribution of the nanoparticles were investigated with laser light scattering, and the surface morphology of the nanoparticles was investigated with transmission electron microscopy. The drug encapsulation efficiency and drug loading content were measured with ultraviolet absorption spectroscopy. The effects of various formulation parameters were evaluated. The prepared nanoparticles were spherical and greater than 100 nm in size. The drug loading content and encapsulation efficiency were greatly influenced by the amount of the copolymer and the volume of the solvent. The PEG content in the polymer could affect the release of drugs from the PLA–Hpr–PEG nanoparticles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2654–2659, 2007     

A multiple emulsion method for loading 5‐fluorouracil into a magnetite‐loaded nanocapsule: a physicochemical investigation

The preparation of 5‐fluorouracil (5‐FU) loaded poly(lactic‐co‐glycolic acid) (PLGA) biodegradable nanocapsules containing magnetite nanoparticles was studied through the modified multiple emulsion solvent evaporation method for magnetically controlled delivery of anticancer drugs. The morphology and size distribution of the prepared magnetite/PLGA nanocapsules were investigated by transmission and scanning electron microscopy. The micrographs showed that the magnetic nanocapsules were almost spherical in shape and their mean diameter was in the nanometer range with a narrow size distribution. Fourier transform infrared and ultraviolet–visible spectroscopy confirmed incorporation of 5‐FU molecules into the PLGA matrix. The magnetite content was assessed by thermogravimetric and magnetometry analysis and the results showed a magnetite content of 35 wt% with high magnetic responsivity. Magnetometry measurements showed superparamagnetic properties of the magnetic nanocapsules with a saturation magnetization of 13.7 emu g^?1. Such biodegradable magnetic nanocapsules could be considered as an appropriate choice for drug targeting. Furthermore, the influence of some important processing parameters such as PLGA concentration, initial loading of 5‐FU and poly(vinyl alcohol) concentration on drug content, encapsulation efficiency and in vitro drug release kinetics was investigated and optimized. The drug content and encapsulation efficiency of the magnetic nanocapsules were 4–7 wt% and 60%–80%, respectively, and the nanocapsules demonstrated controlled release of 5‐FU at 37 °C in a buffer solution. All samples exhibited a burst release at the initial stage and this burst release showed its close dependence on the formulation parameters. Copyright © 2012 Society of Chemical Industry     

Controlling water permeability of composite films of polylactide acid,cellulose, and xyloglucan

To test the hypothesis that the introduction of a hydrophilic hemicellulose would affect viscoelastic properties and increase water permeability, xyloglucan (XG) was adsorbed onto the surface of microcrystalline cellulose (MCC) in water dispersion prior to the extrusion of 79–80 wt % polylactide acid (PLA), 20 wt % MCC, and 0–1 wt % XG. For comparison, composites of PLA, MCC, and non‐absorbed XG were produced. Analysis of thermal properties showed no differences for glass‐transition or melting temperatures, but the crystallinity of the films increased with the addition of MCC and XG. Storage modulus of the composite materials increased with XG content; however, at higher humidities storage modulus decreased, probably because of lower interfacial adhesion. Water permeability through the films increased more with the addition of XG adsorbed to the MCC than with the MCC and XG simply mixed in the same amounts. © 2014 The Authors. Journal of Applied Polymer Science Published by Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41219.     

Protein encapsulation in biodegradable amphiphilic microspheres. I. Polymer synthesis and characterization and microsphere elaboration

Polymerization of lactide on monomethoxypolyoxyethylene (MPOE), using stannous octoate as a catalyst, was carried out in bulk and in solvent. Polymerization in a solvent permits one to work at a lower temperature and thus to prevent transesterification reactions. The copolymers synthesized in solvent exhibited a lower polydispersity and a polylactic acid (PLA) block longer and closer to the expected one. Therefore, this procedure was used to synthesize a series of diblock copolymers MPOE–D ,L -PLA, keeping the PLA chain constant (45,000 g/mol), the MPOE block increasing from 2000 to 5000, 10,000, 15,000, and 20,000 g/mol. The longer the MPOE chain, the higher the water uptake in the MPOE–PLA films and the lower the glass transition temperature of the copolymers. The synthesized copolymers were used to prepare microspheres by the double-emulsion method. The PLA microspheres possess a smooth surface, whereas those made from copolymers have a rough surface with irregularity increasing with the molecular weight of MPOE. The size of these microspheres depends on the amphiphilic nature of the copolymers, their hydrophilicity, and their intrinsic viscosity in the organic solvent. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1695–1702, 1998     

Preparation of polylactide-based microspheres enclosing acetamiprid and evaluation of efficacy against cotton aphid by soil application

Concern for the environment has increased interest in reducing the amount of pesticides applied to agricultural land. This can be accomplished by immobilization of the pesticides in polymer supports, which prevents volatilization, degradation and leaching losses, and provides controlled release of the pesticides. In the present study, acetamiprid, a novel pesticide, was enclosed in polylactide (PLA)-based microspheres using solvent evaporation method via oil-in-oil (O/O) emulsion. Amount of acetamiprid released from PLA microspheres was less than 5% in phosphate buffered saline. On the other hand, incorporation of water-soluble polymer, such as poly(ethylene glycol) (PEG) and poly(oxyethylene) diglycolic acid, into the PLA microspheres resulted in increased amount of released acetamiprid (∼70%). Planting hole application by greenhouse pot test demonstrated that the efficacy of the PLA/PEG microspheres enclosing acetamiprid against cotton aphids was superior to that of PLA microspheres enclosing acetamiprid. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Properties and weldability of plasticized polylactic acid films

The objectives of the presented work were to investigate films based on polylactic acid (PLA) and polyethylene glycol (PEG) in order to improve ductility and weldability of PLA films. The effect of plasticizer amount on the thermal, rheological, and mechanical properties of PLA plasticized films was investigated. The PEG content does affect the glass transition and the cold crystallization temperature of PLA in blends, while the melting temperature was not affected by the addition of PEG. The complex viscosity of the neat PLA granules and of plasticized films showed strong temperature and angular velocity dependence. The Young's modulus and tensile strength of plasticized films were improved with increasing plasticizer concentration, while the elongation at break stays rather constant. Plasticized PLA films were furthermore heat welded. These investigations showed that plasticized PLA films can be welded by heat welding. The obtained weld strength is strongly depending on the PEG amount as well as on selected welding parameters. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40394.