Effects of the viscosity ratio on polyolefin ternary blends

Polyolefin binary and ternary blends were prepared from polypropylene (PP), an ethylene–α‐olefin copolymer (mPE), and high‐density polyethylene (HDPE) on the basis of the viscosity ratio of the dispersed phase to the continuous phase. In PP/mPE/HDPE blends, fibrils were observed when the dispersed‐phase (mPE/HDPE) viscosity was less than that of PP, or when the viscosity of mPE was less than that of PP, although the viscosity of mPE/HDPE was greater than that of PP. The notched impact strength and mechanical properties such as the yield strength, flexural modulus, and hardness of PP/mPE binary blends further increased with the addition of HDPE according to the type of HDPE. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 4027–4036, 2004     

Effects of the blending sequence in polyolefin ternary blends

Ternary blends of isotactic polypropylene (PP), ethylene–octene copolymer (mPE), and high‐density polyethylene (HDPE) were prepared by melt mixing in a twin‐screw extruder with two different sequences of mixing: the simultaneous mixing of the three components (method I) and the premixing of mPE and HDPE followed by mixing with PP (method II). Regardless of the mixing sequence, mPE encapsulated HDPE in the PP matrix, although better mechanical properties were generally obtained with method II. The domain size was mainly determined by the viscosity ratio of mPE to PP in method I and by the viscosity ratio of the binary blend (mPE/HDPE) to PP in method II. Specimens prepared by injection molding gave much finer dispersions than compression‐molded specimens. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 804–811, 2004     

Thermal properties and crystallization behavior of polyolefin ternary blends

Crystallization behaviors, spherulite growth and structure, and the crystallization kinetics of polypropylene (PP)/ethylene‐α‐olefln copolymer (mPE)/high‐density polyethylene (HDPE) ternary blends and of mPE/HDPE binary blends have been studied using polarizing optical micrography (POM) and differential scanning calorimetry (DSC). In mPE/HDPE blends, large pendant groups of mPE disturbed spherulite growth of HDPE, leading to a different crystallite morphology and isothermal kinetics. Non‐isothermal properties, morphology, and isothermal crystallization kinetics of PP in ternary blends were significantly influenced by the composition and crystallization behavior of the mPE/HDPE binary blends as well as the crystallization condition. Polym. Eng. Sci. 44:1858–1865, 2004. © 2004 Society of Plastics Engineers.     

Mechanical properties and morphologies of PP/mPE/filler composites

Because of the poor impact behavior of polypropylene (PP) at low temperatures, the blending of PP with metallocene‐polymerized polyethylene (mPE) elastomers was investigated in this study. However, a reduced modulus of the overall blend was inevitable because of the addition to elastomers. To obtain a balance of the properties, we introduced rigid inorganic fillers to PP/mPE blends. The performance of the composites was characterized with tensile and Charpy notched impact tests, and the fracture morphology was examined with scanning electron microscopy. The results showed that the effects of fillers in a brittle matrix and in a ductile matrix were quantitatively different. For PP/mPE/filler ternary composites, the dependence of Young's modulus and yield strength on CaCO₃ content was not significant compared with that of PP/filler binary composites, whereas the elongation at break and tensile toughness at room temperature for PP/mPE/filler systems were more improved. The impact strength of the PP/mPE blends filled with untreated glass beads and CaCO₃ at a low temperature was lowered because of the weak interfacial bond. However, the values of the impact strength of the PP/mPE/filler composites at a low temperature remained at a high level compared with that of pure PP. In particular, a PP/mPE blend filled with surface‐treated kaolin had a higher low‐temperature impact toughness than the unfilled blend. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 3029–3035, 2002; DOI 10.1002/app.2333     

Nonisothermal crystallization,melting behavior,and morphology of polypropylene/metallocene‐catalyzed polyethylene blends

The nonisothermal crystallization, melting behavior, and morphology of blends of polypropylene (PP) and a metallocene‐catalyzed polyethylene (mPE) elastomer were studied with differential scanning calorimetry, scanning electron microscopy, polarized optical microscopy, and X‐ray diffraction. The results showed that PP and mPE were partially miscible and could form some cocrystallization, although the extent was very small. A modified Avrami analysis and the Mo method were used to analyze the nonisothermal crystallization kinetics of the blends. The values of the Avrami exponent indicated that the crystallization nucleation of the blends was homogeneous, the growth of the spherulites was three‐dimensional, and the crystallization mechanism of PP was not affected by mPE. The crystallization activation energy was estimated with the Kissinger method. Interesting results were obtained with the modified Avrami analysis and Mo and Kissinger methods, and the conclusions were in good agreement. The addition of less mPE increased the overall crystallization rate of PP. The relationship between the composition and morphology of the blends was examined. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1203–1210, 2004     

Effect of the high‐density polyethylene melt index on the microcellular foaming of high‐density polyethylene/polypropylene blends

The effect of high‐density polyethylene (HDPE)/polypropylene (PP) blending on the crystallinity as a function of the HDPE melt index was studied. The melting temperature and total amount of crystallinity in the HDPE/PP blends were lower than those of the pure polymers, regardless of the blend composition and melt index. The effects of the melt index, blending, and foaming conditions (foaming temperature and foaming time) on the void fractions of HDPEs of various melt indices and HDPE/PP blends were also investigated. The void fraction was strongly dependent on the foaming time, foaming temperature, and blend composition as well as the melt index of HDPE. The void fraction of the foamed 30:70 HDPE/PP blend was always higher than that of the foamed 50:50 HDPE/PP blend, regardless of the melt index. The microcellular structure could be greatly improved with a suitable ratio of HDPE to PP and with foaming above the melting temperature for long enough; however, using high‐melt‐index HDPE in the HDPE/PP blends had a deleterious effect on both the void fraction and cell morphology of the blends. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 364–371, 2004     

玻纤增强茂金属聚乙烯弹性体改性聚丙烯的研究

采用短玻纤（SGF）对PP／茂金属聚乙烯弹性体（mPE）共混物进行增强,制得PP／mPE/SGF三元共混复合材料,分别对PP／mPE二元共混物和PP／mPE/SGF三元共混复合材料的力学性能进行了研究。探讨了弹性体用量、SGF的用量和表面处理对共混物和复合材料拉伸性能、低温冲击韧性和蠕变性能的影响。结果表明,PP／mPE/SGF三元共混复合材料同时具有良好的刚性和韧性。     

茂金属聚乙烯的共混改性研究

对三种茂金属聚乙烯 (mPE)做了DSC研究。将茂金属聚乙烯同传统聚烯烃 (HDPE ,PP ,LDPE)进行了共混研究 ,结果表明mPE的加入提高了LDPE的拉伸性能 ,使HDPE和PP的拉伸强度下降 ,但mPE含量在 2 0 %～2 5 %的范围内 ,拉伸强度和断裂伸长率下降很小。mPE的加入大大提高了PP和HDPE的冲击性能。对mPE/LDPE共混物吹膜进行了研究 ,测定了共混物的熔体流动速率 ,探索了吹膜的工艺条件 ,以及薄膜的拉伸性能、撕裂性能与共混组成比的关系。     

Studies on binary and ternary blends of polypropylene with SEBS,PS, and HDPE. II. Tensile and impact properties

Studies are reported on tensile and impact properties of several binary and ternary blends of polypropylene (PP), styrene-b-ethylene-co-butylene-b-styrene triblock copolymer (SEBS), high-density polyethylene (HDPE), and polystyrene (PS). The blend compositions of the binary blends PP/X were 10 wt % X and 90 wt % PP, while those of the ternary blends PP/X/Y were 10 wt % of X and 90 wt % of PP/Y, or 10 wt % Y and 90 wt % PP/X (PP/Y and PP/X were of identical composition 90:10); X, Y being SEBS, HDPE, or PS. The results are interpreted for the effect of each individual component by comparing the binary blends with the reference system PP, and the ternary blends with the respective binary blends as the reference systems. The ternary blend PP/SEBS/HDPE showed properties distinctly superior to those of PP/SEBS/PS or the binary blends PP/SEBS and PP/HDPE. Differences in the tensile yield behavior of the different samples and their correlation with impact strength suggested shear yielding as the possible mechanism of enhancement of impact strength. Scanning electron microscopic study of the impact fractured surfaces also supports the shear yielding mechanism of impact toughening of these blends.     

Relationship between cell morphology and impact strength of microcellular foamed high‐density polyethylene/polypropylene blends

Polymer blends, such as those resulting from recycling postconsumer plastics, often have poor mechanical properties. Microcellular foams have been shown to have the potential to improve properties, and permit higher‐value uses of mixed polymer streams. In this study, the effects of microcellular batch processing conditions (foaming time and temperature) and HDPE/PP blend compositions on the cell morphology (the average cell size and cell‐population density) and impact strength were studied. Optical microscopy was used to investigate the miscibility and crystalline morphology of the HDPE/PP blends. Pure HDPE and PP did not foam well at any processing conditions. Blending facilitated the formation of microcellular structures in polyolefins because of the poorly bonded interfaces of immiscible HDPE/PP blends, which favored cell nucleation. The experimental results indicated that well‐developed microcellular structures are produced in HDPE/PP blends at ratios of 50:50 and 30:70. The cell morphology had a strong relationship with the impact strength of foamed samples. Improvement in impact strength was associated with well‐developed microcellular morphology. Polym. Eng. Sci. 44:1551–1560, 2004. © 2004 Society of Plastics Engineers.     

Study on processing of ultrahigh molecular weight polyethylene/polypropylene blends

The processing of ultrahigh molecular weight polyethylene (UHMWPE) by the addition of polypropylene (PP) and high‐density polyethylene (HDPE) was investigated. The results show that the addition of PP improves the processability of UHMWPE more effectively than does the addition of HDPE. UHMWPE/PP blends can be effectively processed with a twin‐roller and general single‐screw extruder. In the extrusion of UHMWPE/PP blends, PP is enriched at the surface of the blend adjacent to the barrel wall, thus increasing the frictional force on the wall; the conveyance of the solid down to the channel can then be carried out. The melt pool against the active flight flank exerts a considerable pressure on the UHMWPE powder in the passive flight flank, which overcomes the hard compaction of UHMWPE. The PP penetrates into the gaps between the particles, acting as a heat‐transfer agent and adhesive, thus enhancing the heat‐transfer ability in the material. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 977–985, 2004     

Compatibilizers for recycling of the plastic mixture wastes. II. The effect of a compatibilizer for binary blends on the properties of ternary blends

In this article, we discuss the effect of a compatibilizer for binary blends on the properties of ternary blends composed of high‐density polyethylene (HDPE), polypropylene (PP), or polystyrene (PS) and poly(vinyl chloride) (PVC) virgin polymers with a simulated waste plastics fraction. Chlorinated polyethylene (CPE), ethylene–propylene rubber (EPR), and their 1/1 (w/w) mixture were tested as compatibilizers for the HDPE/PP/PVC ternary blend. CPE, styrene‐ethylene‐propylene block copolymer (SEP), or their 1/1 (w/w) mixture were tested as compatibilizers for the HDPE/PS/PVC ternary blend. The composition of the ternary blends were fixed at 8/1/1 by weight ratio. The amount of the compatibilizer was 3 phr. Rheological, mechanical, and thermal properties were measured. For the 8/1/1 HDPE/PP/PVC ternary blends, the tensile strength was slightly decreased, but the impact strength was significantly increased by adding EPR, CPE, or their mixture. EPR exhibited the most significant impact modification effect for the ternary blends. In a similar way, for 8/1/1 HDPE/PS/PVC ternary blends, on adding SEP, CPE, or their mixture, the tensile strength was slightly decreased, but the impact strength was noticeably increased. It was found that the SEP worked much better as an impact modifier for the ternary blends than CPE or the SEP/CPE mixture did. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 1048–1053, 2000     

mPE弹性体增韧改性PP力学性能的研究

用茂金属聚乙烯（mPE)弹性体代替传统的弹性体,对聚丙烯（PP）的增韧改性进行了研究。探讨了橡塑比和mPE的牌号对共混物力学性能的影响;并对不同的弹性体的增韧效果做了对比研究。结果表明,与传统的弹性体相比,mPE增韧改性的PP显示出卓越的低温冲击性能。     

Characterization of the free volume in high‐impact polystyrene/polypropylene and high‐impact polystyrene/high‐density polyethylene blends probed by positron annihilation spectroscopy

The free‐volume properties of high‐impact polystyrene (HIPS)/polypropylene (PP) and HIPS/high‐density polyethylene (HDPE) blends were investigated by means of positron annihilation lifetime spectroscopy (PALS). The measured results show that the free‐volume holes in the semicrystalline polymers, such as PP and HDPE, were not large enough to accommodate the branched chains and the end groups of the macromolecular chains in HIPS to produce favorable interactions between the semicrystalline polymers and the HIPS polymer in these blends; thus immiscible blends were formed. The weak interaction between two dissimilar polymer molecules only took place in the regions between two amorphous phases. In addition, the observed negative deviations of the longest lifetime intensity and the free‐volume fraction were attributed to the influence of the interfacial polarization during PALS measurement. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1507–1514, 2003     

茂金属聚乙烯弹性体增韧改性聚丙烯力学性能的研究

用茂金属聚乙烯弹性体（mPE）代替传统的弹性体,对PP的增韧改性进行了研究。探讨橡塑比和mPE的牌号对共混物力学性能的影响;并对不同的弹性体的增韧效果做了对比研究。结果表明,与传统的弹性体相比,mPE增韧改性的PP显示出卓越的低温冲击性能。     

Melting behavior and isothermal crystallization kinetics of polypropylene/metallocene‐catalyzed polyethylene elastomer blends

Polypropylene (PP)/metallocene‐catalyzed polyethylene elastomer (mPE) blends were prepared in a twin‐screw extruder. The melting behavior, crystallization behavior, and isothermal crystallization kinetics of the blends were studied with differential scanning calorimetry. The results showed that PP and mPE were partially miscible and that the addition of mPE shifted the melting peak of PP to a lower temperature but the crystallization temperature to a higher temperature, demonstrating a dilution effect of mPE on PP. The isothermal crystallization kinetics of the blends were described with the Avrami equation. The values of the Avrami exponent indicated that the nucleation mechanism of the blends was heterogeneous, the growth of spherulites was almost three‐dimensional, and the crystallization mechanism of PP was not affected much by mPE. At the same time, the Avrami exponents of the blends were higher than that of pure PP, and this showed that the addition of mPE helped PP to form more perfect spherulites. The crystallization rate of PP was increased by mPE because the dilution effect of mPE on PP increased the mobility of PP chains. The crystallization activation energy was estimated with the Arrhenius equation, and the nucleation constant was determined by the Hoffman–Lauritzen theory. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Mechanical properties and morphology of PP/ABS blends compatibilized with PP‐g‐2‐HEMA

Polypropylene (PP) and acrylonitrile–butadiene–styrene blends of different composition were prepared using a single‐screw extruder. The binary blend of PP/ABS was observed to be incompatible and shows poor mechanical properties. PP‐g‐2‐hydroxyethyl methacrylate (2‐HEMA) was used as a compatibilizer for the PP/ABS blends. The ternary compatibilized blends of PP/ABS/PP‐g‐2‐HEMA showed improvement in the mechanical properties. Electron micrographs of these blends showed a homogeneous and finer distribution of the dispersed phase. The mechanical performance increased particularly in the PP‐rich blend. The 2.5‐phr (part per hundred of resin) compatibilizer was observed to bring improvement to the properties. The suitability of various existing theoretical models for the predication of the tensile moduli of these blends was examined. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 72–78, 2003     

茂金属聚乙烯弹性体mPE增韧改性聚丙烯的研究

本研究工作用茂金属聚乙烯弹性体mPE代替代表的弹性体,对PP的增专改性进行了研究,探讨了共混工艺参数和橡逆比对共混物力学性能的影响;并对不同的弹性体的增韧效果做了对比研究,结果表明,与传统的弹性体相比,mPE增韧改性的PP显示出卓越的低温性能和加工性能;另外用扫描电子显微镜（SEM）对共混物相态结构及断裂形貌进行了分析研究。     

Thermal and mechanical properties for binary blends of metallocene polyethylene with conventional polyolefins

The thermal and mechanical properties for four binary blends, high-density polyethylene (HDPE)–metallocene polyethylene (MCPE), polypropylene (PP)–MCPE, poly(propylene-co-ethylene) (CoPP)–MCPE, and poly(propylene-co-ethylene-co-1-butene) (TerPP)–MCPE were investigated to compare the compatibility and molecular micromechanism of the blends. We report in this work all the blend systems that are thermodynamically immiscible but mechanically compatible which have been understood by their thermal and mechanical behaviors. A lower content of MCPE (up to 50%) in PP–MCPE, CoPP–MCPE, and TerPP–MCPE blends showed discernibly two β transitions, whereas β relaxation was shifted to a lower temperature with the MCPE content in the HDPE–MCPE system. These results conclude that the degree of compatibility in the HDPE–MCPE blend is the largest among the blend systems that we have studied, which also can be explained in terms of the similar chemical structure of polyolefins. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 2441–2450, 1998     

Tensile properties and morphology of the dynamically cured EPDM and PP/HDPE ternary blends

The tensile properties and morphology of the polyolefin ternary blends of ethylenepropylene–diene terpolymer (EPDM), polypropylene and high density polyethylene were studied. Blends were prepared in a laboratory internal mixer where EPDM was cured in the presence of PP and HDPE under shear with dicumyl peroxide (DCP). For comparison, blends were also prepared from EPDM which was dynamically cured alone and blended with PP and HDPE later (cure–blend). The effect of DCP concentration, intensity of the shear mixing, and rubber/plastics composition was studied. The tensile strength and modulus increased with increasing DCP concentration in the blends of EPDM-rich compositions but decreased with increasing DCP concentration in blends of PP-rich compositions. In the morphological analysis by scanning electron microscopy (SEM), the small amount of EPDM acted as a compatibilizer to HDPE and PP. It was also revealed that the dynamic curing process could reduce the domain size of the crosslinked EPDM phase. When the EPDM forms the matrix, the phase separation effect becomes dominant between the EPDM matrix and PP or HDPE domain due to the crosslinking in the matrix.