Thermal behavior and tensile properties of poly(ethylene terephthalate‐co‐ethylene isophthalate)

Poly(ethylene terephthalate) (PET) and poly(ethylene isophthalate) (PEI) homopolymers were synthesized by the two‐step melt polycondensation process of ethylene glycol (EG) with dimethyl terephthalate (DMT) and/or dimethyl isophthalate (DMI), respectively. Nine copolymers of the above three monomers were also synthesized by varying the mole percent of DMI with respect to DMT in the initial monomer feed. The thermal behavior was investigated over the entire range of copolymer composition by differential scanning calorimetry (DSC). The glass transition (T_g), cold crystallization (T_cc), melting (T_m), and crystallization (T_c) temperatures have been determined. Also, the gradually increasing proportion of ethyleno‐isophthalate units in the virgin PET drastically differentiated the tensile mechanical properties, which were determined, and the results are discussed. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 200–207, 2000     

Synthesis and characterization of poly(ethylene‐co‐trimethylene terephthalate)s

Taking advantage of a melt polycondensation process, a series of copolyesters composed of pure terephthalate acid (PTA), ethylene glycol (EG), and 1,3‐propanediol (1,3‐PDO) were synthesized. The component, molecular weight, molecular weight distribution, and thermal properties of the copolymers were characterized. The results show that the contents of trimethylene terephthalate (TT) units in the resulting copolyesters are higher than PDO compositions in original diol. Oligomer content in the copolyesters varies with the compositions and attains a minimum value when the TT ingredient is 49.52 mol %. The glass transition temperature (T_g) of the copolyesters varies from 78.5°C for PET (polyethylene terephthalate) to 43.5°C for PTT (polytrimethylene terephthalate) and decreases monotonically with the components. The copolyesters are amorphous copolymers when TT content is in the range of 32.4–40.8 mol %, as calculated from the melting enthalpy (ΔH_m) measured via differential scanning calorimetry. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1511–1521 2006     

Melt polymerization of copoly(ethylene terephthalate–imide)s and thermal properties

Copoly(ethylene terephthalate–imide)s (PETI) were prepared by melt polycondensation of bis(2-hydroxyethyl)terephthalate (BHET) and imide containing oligomer, i.e., 4,4′-bis[(4-carbo-2-hydroxyethoxy)phthalimido]diphenylmethane(BHEI). The apparent rate of poly-condensation reaction was faster than that of homo poly(ethylene terephthalate) (PET) due to the presence of imide units. The PETI copolymers with up to 10 mol % of BHEI unit in the copolymer showed about the same molecular weight and carboxyl end group content as homo PET prepared under similar reaction conditions. The increase in T_g of copolymer was more dependent on molar substitution of BHEI than on substitution of BHEN, reaching 91°C with 8 mol % BHEI units in the copolymer from T_g = 78.9°C of homo PET. In the case of PETN copolymer, 32 mol % of bis(2-Hydroxyethyl)naphthalate (BHEN) units gave T_g of 90°C. The maximum decomposition temperature of PETI copolymer was about the same as that of homo PET by TGA analysis. The char yield at 800°C was higher than that of homo PET. © 1996 John Wiley & Sons, Inc.     

Biodegradability of poly(ethylene terephthalate) copolymers with poly(ethylene glycol)s and poly(tetramethylene glycol)

Poly(ethylene terephthalate) copolymers were prepared by melt polycondensation of dimethyl terephthalate and excess ethylene glycol with 10–40mol% (in feed) of poly(ethylene glycol) (E) and poly(tetramethylene glycol) (B), with molecular weight (MW) of E and B 200–7500 and 1000, respectively. The reduced specific viscosity of copolymers increased with increasing MW and content of polyglycol comonomer. The temperature of melting (T_m), cold crystallization and glass transition (T_g) decreased with the copolymerization. T_m depression of copolymers suggested that the E series copolymers are the block type at higher content of the comonomer. T_g was decreased below room temperature by the copolymerization, which affected the crystallinity and the density of copolymer films. Water absorption increased with increasing content of comonomer, and the increase was much higher for E1000 series films than B1000 series films. The biodegradability was estimated by weight loss of copolymer films in buffer solution with and without a lipase at 37°C. The weight loss was enhanced a little by the presence of a lipase, and increased abruptly at higher comonomer content, which was correlated to the water absorption and the concentration of ester linkages between PET and PEG segments. The weight loss of B series films was much lower than that of E series films. The abrupt increase of the weight loss by alkaline hydrolysis is almost consistent with that by biodegradation.     

Crystallization kinetics of poly(1,4‐butylene‐co‐ethylene terephthalate)

The crystallization kinetics of poly(butylene terephthalate) (PBT), poly(ethylene terephthalate) (PET), and their copolymers poly(1,4‐butylene‐co‐ethylene terephthalate) (PBET) containing 70/30, 65/35 and 60/40 molar ratios of 1,4‐butanediol/ethylene glycol were investigated using differential scanning calorimetry (DSC) at crystallization temperatures (T_c) which were 35–90 °C below equilibrium melting temperature . Although these copolymers contain both monomers in high proportion, DSC data revealed for copolymer crystallization behaviour. The reason for such copolymers being able to crystallize could be due to the similar chemical structures of 1,4‐butanediol and ethylene glycol. DSC results for isothermal crystallization revealed that random copolymers had a lower degree of crystallinity and lower crystallite growth rate than those of homopolymers. DSC heating scans, after completion of isothermal crystallization, showed triple melting endotherms for all these polyesters, similar to those of other polymers as reported in the literature. The crystallization isotherms followed the Avrami equation with an exponent n of 2–2.5 for PET and 2.5–3.0 for PBT and PBETs. Analyses of the Lauritzen–Hoffman equation for DSC isothermal crystallization data revealed that PBT and PET had higher growth rate constant G_o, and nucleation constant K_g than those of PBET copolymers. © 2001 Society of Chemical Industry     

Role of 2‐hydroxyethyl end group on the thermal degradation of poly(ethylene terephthalate) and reactive melt mixing of poly(ethylene terephthalate)/poly(ethylene naphthalate) blends

In an attempt to minimize the acetaldehyde formation at the processing temperatures (280–300°C) and the outer–inner transesterification reactions in the poly (ethylene terephthalate) (PET)–poly(ethylene naphthalate) (PEN) melt‐mixed blends, the hydroxyl chain ends of PET were capped using benzoyl chloride. The thermal characterization of the melt‐mixed PET–PEN blends at 300°C, as well as that of the corresponding homopolymers, was performed. Degradations were carried out under dynamic heating and isothermal conditions in both flowing nitrogen and static air atmosphere. The initial decomposition temperatures (T_i) were determined to draw useful information about the overall thermal stability of the studied compounds. Also, the glass transition temperature (T_g) was determined by finding data, indicating that the end‐capped copolymers showed a higher degradation stability compared to the unmodified PET and, when blended with PEN, seemed to be efficient in slowing the kinetic of transesterification leading to, for a finite time, the formation of block copolymers, as determined by ¹H‐NMR analysis. This is strong and direct evidence that the end‐capping of the ? OH chain ends influences the mechanism and the kinetic of transesterification. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Crosslinking studies on poly(ethylene terephthalate‐co‐1,4‐phenylene bisacrylate)

Several compositionally different poly(ethylene terephthalate‐co‐1,4‐phenylene bisacrylate) (PETPBA) copolymers were melt spun into fibers. The resulting fibers were subjected to UV irradiation to induce crosslinking. Evidence of crosslinking was obtained from FTIR, solid‐state ¹³C‐NMR, thermal analysis, and solubility. Irradiation of the fiber results in an increased glass‐transition temperature, reduced thermal shrinkage, and enhanced modulus retention at elevated temperature. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1698–1702, 2004     

Novel copolyesters containing naphthalene structure III. Copolyesters prepared from 2,6‐dimethyl naphthalate,ethylene glycol,and 2,2‐dialkyl‐1,3‐propanediols

Poly(ethylene naphthalate) (PEN) copolymers were prepared by melt polycondensation of dimethyl naphthalate and excess ethylene glycol with 5–40 mol % (in feed) of 1,3‐propanediol or 2,2‐dialkyl‐1,3‐propanediols, where the dialkyl groups are dimethyl, diethyl, and butyl‐ethyl. No significant depression of reduced specific viscosity was observed. The comonomer contents in the copolymers are considerably higher than those in the feed. The effects of the copolymer composition on the structures of the films were investigated using thermal analyses, density measurements, X‐ray diffraction methods, and other physical tests. The crystallinities and densities of heat‐treated films decreased with increasing content of comonomer and length of alkyl side chain in the comonomer. The glass transition temperature (T_g) and melting temperature (T_m) were decreased by the copolymerization, while an increase in the length of the alkyl side chain hardly affected T_ms of the heat‐treated films. Alkali resistance, moisture resistance, dye ability, and thermal shrinkage were increased by the incorporation of comonomer having an alkyl side chain. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2754–2763, 2001     

Synthesis and thermal characterization of random poly(butylene terephthalate‐co‐2‐methyl‐ethylene terephthalate) copolyesters

Poly(butylene terephthalate‐co‐2‐methyl‐ethylene terephthalate) (PBT/MET) was synthesized by incorporating 1,2‐propandiol(1,2‐PDO) into PBT chains. The molar composition and chemical structure of PBT/MET copolyesters were confirmed by means of FT‐IR and ¹H‐NMR. To investigate the effect of 1,2‐PDO on the thermal properties of PBT/MET copolyesters, the copolymerizations were carried out by varying various contents of MET units, and the prepared materials were evaluated by differential scanning calorimetry and thermogravimetric analysis. Results suggested that with the increase of the content of 1,2‐PDO, the amount of crystallinity and the melting temperature decline, while the glass transition temperature increases and the copolyesters become more transparent and brittle with respect to PBT homopolymer. In addition, the T_g‐composition and T_m‐composition data are well subjected to the Wood equation and Flory's equation, respectively. All these copolyesters are found to consist of the general trend displayed by copolymers reported elsewhere. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Segmented copolymers of uniform tetra‐amide units and poly(phenylene oxide) by direct coupling

Segmented copolymers with telechelic poly(2,6‐dimethyl‐1,4‐phenylene ether) (PPE) segments and crystallizable bisester tetra‐amide units (two‐and‐a‐half repeating unit of nylon‐6,T) were studied. The copolymers were synthesized by reacting bifunctional PPE with hydroxylic end groups with an average molecular weight of 3500 g/mol and bisester tetra‐amide units via an ester polycondensation reaction. The bisester tetra‐amide units had phenolic ester groups. By replacing part of the bisester tetra‐amide units with diphenyl terephthalate units (DPT), the concentration of tetra‐amide units in the copolymer was varied from 0 to 11 wt%. Polymers were also prepared from bifunctional PPE, DPT, and a diaminediamide (6T6‐diamine). The thermal and thermal mechanical properties were studied by DSC and DMA and compared with a copolymer with flexible spacer groups between the PPE and the T6T6T. The copolymers had a high T_g of 180–200°C and a melting temperature that increased with amide content of 220–265°C. The melting temperature was sharp with monodisperse amide segments. The T_m – T_c was 39°C, which suggests a fast, but not very fast, crystallization. The crystallinity of the amide was ～ 20%. The copolymers are semicrystalline materials with a high T_g and a high T_g/T_m ratio (> 0.8). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 512–518, 2007     

Oxygen barrier properties of PET copolymers containing bis(2‐hydroxyethyl)hydroquinones

A series of poly[ethylene‐co‐bis(2‐ethoxy)hydroquinone terephthalate], PET‐co‐BEHQ copolymers were prepared by polymerization of various substituted bis(2‐hydroxyethyl)hydroquinones (BEHQs), dimethyl terephthalate (DMT), and ethylene glycol (EG). In addition to copolymers containing 6–16.5 mol % BEHQ, the homopolymer of BEHQ with dimethyl terephthalate, p(BEHQ‐T), was also prepared. The thermal and barrier properties of amorphous materials were studied. As the amount of comonomer was increased, the T_g and T_m of the materials decreased relative to those of PET. Oxygen permeability also decreased with increasing comonomer content. This improvement in barrier‐to‐oxygen permeability was primarily due to a decrease in solubility of oxygen in the polymer. All of the copolymers tested displayed similar oxygen diffusion coefficients. The decrease in solubility correlates with the decrease in T_g. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 934–942, 2003     

Synthesis and non‐isothermal crystallization behavior of poly(ethylene phthalate‐co‐terephthalate)s

A series of poly(ethylene phthalate‐co‐terephthalate)s were synthesized by melt polycondensation of ethylene glycol (EG) with dimethyl phthalate (DMP) and dimethyl terephthalate (DMT) in various proportions. The DMT‐rich polymers were obtained with reasonably high molecular weights, whereas the DMP‐rich polymers were synthesized with relatively low molecular weights due to steric effects associated with the highly kinked DMP monomer. The compositions and thermal properties of the polymers were determined. The copolymers containing DMP in amounts of ≤ 21 mol% were crystallizable, whereas the other polymers were not. All the polymers exhibited a single glass transition temperature. Analysis of the measured glass transition temperatures and crystal melting temperatures confirmed that the DMT‐rich copolymers are random copolymers. The non‐isothermal crystallization behaviors of the DMT‐rich copolymers were investigated by calorimetry and modified Avrami analysis. The Avrami exponents n were found to range from 2.7 to 3.8, suggesting that the copolymers crystallize via a heterogeneous nucleation and spherulitic growth mechanism; that is, the incorporation of DMP units as the minor component does not change the growth mechanism of the copolymers. In addition, the activation energies of the crystallizations of the copolymers were determined; the copolymers were found to have higher activation energies than the PET homopolymer. Polym. Eng. Sci. 44:1682–1691, 2004. © 2004 Society of Plastics Engineers.     

Sequence analysis and fiber properties of a blend of poly(ethylene terephthalate) and poly(ethylene terephthalate‐co‐4,4′‐bibenzoate)

Blends of poly(ethylene terephthalate) (PET) and poly(ethylene terephthalate‐co‐4,4′‐ bibenzoate) (PETBB) are prepared by coextrusion. Analysis by ¹³C‐NMR spectroscopy shows that little transesterification occurs during the blending process. Additional heat treatment of the blend leads to more transesterification and a corresponding increase in the degree of randomness, R. Analysis by differential scanning calorimetry shows that the as‐extruded blend is semicrystalline, unlike PETBB15, a random copolymer with the same composition as the non‐ random blend. Additional heat treatment of the blend leads to a decrease in the melting point, T_m, and an increase in glass transition temperature, T_g. The T_m and T_g of the blend reach minimum and maximum values, respectively, after 15 min at 270°C, at which point the blend has not been fully randomized. The blend has a lower crystallization rate than PET and PETBB55 (a copolymer containing 55 mol % bibenzoate). The PET/PETBB55 (70/30 w/w) blend shows a secondary endothermic peak at 15°C above an isothermal crystallization temperature. The secondary peak was confirmed to be the melting of small and/or imperfect crystals resulting from secondary crystallization. The blend exhibits the crystal structure of PET. Tensile properties of the fibers prepared from the blend are comparable to those of PET fiber, whereas PETBB55 fibers display higher performance. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1793–1803, 2004     

Synthesis and properties of polystyrene‐b‐poly(ethylene oxide)‐b‐polystyrene triblock copolymers

A series of well‐defined and property‐controlled polystyrene (PS)‐b‐poly(ethylene oxide) (PEO)‐b‐polystyrene (PS) triblock copolymers were synthesized by atom‐transfer radical polymerization, using 2‐bromo‐propionate‐end‐group PEO 2000 as macroinitiatators. The structure of triblock copolymers was confirmed by ¹H‐NMR and GPC. The relationship between some properties and molecular weight of copolymers was studied. It was found that glass‐transition temperature (T_g) of copolymers gradually rose and crystallinity of copolymers regularly dropped when molecular weight of copolymers increased. The copolymers showed to be amphiphilic. Stable emulsions could form in water layer of copolymer–toluene–water system and the emulsifying abilities of copolymers slightly decreased when molecular weight of copolymers increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 727–730, 2006     

Effects of molecular weight on phase structure of poly(ethylene terephthalate)/poly(ethylene 2,6‐naphthalate) blends

The phase structure of poly(ethylene terephthalate)/poly(ethylene 2,6‐naphthalate) (PET/PEN) blends was studied in relation to the molecular weight. The samples were prepared by both solution blends, which showed two glass‐transition temperatures (T_g), and melt blends (MQ), which showed a single T_g, depending on the composition of the blends. The T_g of the MQ series was independent of the molecular weight of the homopolymer, although the degree of transesterification in the blends was affected by the molecular weight. The MQ series showed two exotherms during the heating process of a differential scanning calorimetry scan. The peak temperature and the heat flow of the exotherms were affected by the molecular weight of the homopolymers. The strain‐induced crystallization of the MQ series suggested the independent crystallization of PET and PEN. Based on the results, a microdomain structure of each homopolymer was suggested. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2428–2438, 2005     

Synthesis and characterization of poly(butylene terephthalate‐co‐triethylene terephthalate) copolyesters

Poly(butylene terephthalate‐co‐triethylene terephthalate) random copolymers of various compositions and molecular weights were synthesized in bulk and characterized in terms of their chemical structure and thermal and rheological properties. At room temperature all the copolymers were partially crystalline and showed good thermal stability. The main effect of copolymerization was a decrease in the melting and glass‐transition temperatures with respect to the poly(butylene tere‐ phthalate) homopolymer. The fusion temperatures were well correlated with the composition by the Baur equation and the equilibrium melting temperature and the heat of fusion extrapolated values for poly(butylene terephthalate) were in good agreement with those reported elsewhere. Triethylene terephthalate units were found to influence the rheological behavior in the melt, the viscosity being significantly higher than that of the poly(butylene terephthalate‐co‐diethylene terephthalate) copolymers investigated previously. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 981–990, 2001     

Thermal,rheological, mechanical,and dyeing property studies of poly(ethylene‐co‐trimethylene terephthalate) copolymer filaments

The thermal and rheological properties of poly(ethylene‐co‐trimethylene terephthalate) (PETT) copolymer are investigated. The thermal behavior of PETT copolymers is dependent on the composition. The PETT‐15 and PETT‐85 copolymers can crystallize, whereas the PETT‐30 copolymer cannot crystallize at 5°C/min cooling rate. The copolymers have a good thermal stability, even though the addition of poly(trimethylene terephthalate) (PTT) chain causes a disadvantage to the thermal stability of the copolymers. Moreover, the PETT copolymers are a typical pseudoplastic fluid exhibiting shear thinning. With increasing the shear rate or the content of PTT units, the flow activation energy decreases and the sensitivity of the shear viscosity to the melt temperature declines. The PETT copolymer filaments have intermediate elastic recovery and dyeability between poly(ethylene terephthalate) (PET) and PTT filaments. With increasing the PTT content, the elastic recovery and dyeability of PETT copolymer filaments increase. That is to say, introducing PTT units as a minor component into the macromolecular chains is an available means to improve the properties of PET filament. The obtained PETT copolymer filaments blend the advantage of the mechanical property of PET and the elastic and dyeability of PTT filament together into one polymer and possess a softer feeling and a higher extension. POLYM. ENG. SCI., 50:1689–1695, 2010. © 2010 Society of Plastics Engineers     

Synthesis and characterization of poly(ethylene terephthalate‐co‐isophthalate)s with low content of isophthalate units

The objective of this work was to study the effect of the introduction of low amounts of isophthalate units on the mechanical properties, crystallization rates, and thermal parameters of poly(ethylene terephthalate). For this reason a series of five random poly(ethylene terephthalate‐co‐isophthalate) copolymers, containing 0.5, 1, 1.5, 2, and 4 mol % isophthalic acid, were prepared by the melt polycondensation process. The intrinsic viscosity of copolymers ranged between 0.7 and 0.8 dL/g. The increase of isophthalate content resulted in a significant decrease of the crystallization rates, but in a small decline of tensile strength, Young's modulus, and elongation at break, whereas tensile strength at yield point remained almost unaffected. Also, a decrease in the melting point was recorded, whereas the glass‐transition temperature was only very slightly affected. The higher decrease for the aforementioned parameters was noted for the copolymer with 4 mol % isophthalate units content. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1931–1941, 2002     

Melt rheology and properties of compatibilized recycled poly(ethylene terephthalate)/(styrene‐ethylene‐ethylene‐propylene‐styrene) block copolymer blends

Blends of recycled poly(ethylene terephthalate) (R‐PET) and (styrene‐ethylene‐ethylene‐propylene‐styrene) block copolymer (SEEPS) compatibilized with (maleic anhydride)‐grafted‐styrene‐ethylene‐butylene‐styrene (SEBS‐g‐MAH) were prepared by melt blending. The compatibilizing effects of SEBS‐g‐MAH were investigated systematically by study of the morphology, linear viscoelastic behavior, and thermal and mechanical properties of the blends. The results show that there is good agreement between the results obtained by rheological measurement and morphological analysis. The rheological test shows that the melt elasticity and melt strength of the blends increase with the addition of SEBS‐g‐MAH. The Cole‐Cole plots and van Gurp‐Palmen plots confirm the compatibilizing effect of SEBS‐g‐MAH. However, the Palierne model fails to predict the linear viscoelastic properties of the blends. The morphology observation shows that all blends exhibit a droplet‐matrix morphology. In addition, the SEEPS particle size in the (R‐PET)/SEEPS blends is significantly decreased and dispersed uniformly by the addition of SEBS‐g‐MAH. Differential scanning calorimeter analysis shows that the crystallization behavior of R‐PET is restricted by the incorporation of SEEPS, whereas the addition of SEBS‐g‐MAH improves the crystallization behavior of R‐PET compared with that of uncompatibilized (R‐PET)/SEEPS blends. The Charpy impact strength of the blends shows the highest value at SEBS‐g‐MAH content of 10%, which is about 210% higher than that of pure R‐PET. J. VINYL ADDIT. TECHNOL., 22:342–349, 2016. © 2014 Society of Plastics Engineers     

Synthesis and characterization of a poly(ether–ester) copolymer from poly(2,6 dimethyl‐1,4‐phenylene oxide) and poly(ethylene terephthalate)

A series of poly(ether–ester) copolymers were synthesized from poly(2,6 dimethyl‐1,4‐phenylene oxide) (PPO) and poly(ethylene terephthalate) (PET). The synthesis was carried out by two‐step solution polymerization process. PET oligomers were synthesized via glycolysis and subsequently used in the copolymerization reaction. FTIR spectroscopy analysis shows the coexistence of spectral contributions of PPO and PET on the spectra of their ether–ester copolymers. The composition of the poly(ether–ester)s was calculated via ¹H NMR spectroscopy. A single glass transition temperature was detected for all synthesized poly(ether–ester)s. T_g behavior as a function of poly(ether–ester) composition is well represented by the Gordon‐Taylor equation. The molar masses of the copolymers synthesized were calculated by viscosimetry. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006