New method of dyeing keratin fibers using poly(ethylene imine) and its coloring mechanism

To improve the colorability of keratin fibers at lower temperatures, we developed a novel coloring method using poly(ethylene imine) (PEI) as a counterion reagent (human hair was treated beforehand with a PEI solution and then was colored with an acid dye). As a result of this new method, the coloring and color fastness to shampooing clearly improved with respect to the usual method. Next, to study the coloring mechanism with PEI, we investigated the penetration of PEI and Orange II into bleached human hair by optical microscopy. The results showed that the penetration of PEI and Orange II into bleached human hair increased with an increasing PEI treatment time and with a decreasing PEI molecular weight. With these experiments, we demonstrated that PEI, which penetrated the cortex region, exerted counterionization on Orange II, thereby increasing the penetration of Orange II into bleached human hair. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3806–3810, 2003     

Diffusion behavior of poly(ethylene imine) into keratin fibers using microspectrophotometry

In order to investigate the diffusion behavior of poly(ethylene imine) (PEI) into keratin fibers, cross‐sectional samples of bleached white human hair treated with PEI were prepared. We were successful in developing a method for analyzing the diffusion behavior of PEI into human hair, which to our knowledge is a first. The diffusion pattern of PEI into human hair, which cannot be determined by optical microscopy, can be determined by our method. After the treatment, the cross‐sectioned hair samples were dyed with Orange II and the cross‐sectional intensity scans were measured at a wavelength of 487 nm (λ_max of Orange II) with a microspectrophotometer. In our method, the diffusion pattern of PEI at pH 11.1 showed Fickian type characteristics. This suggests that the diffusion coefficient of PEI is essentially independent of the PEI concentration. By calculating the diffusion coefficient from the PEI concentration profile, the diffusion coefficient of PEI [number‐average molecular weight (M_n) = 300 and 600] into the bleached human hair was found to be on the order of 10^?10 cm²/s. In addition, the diffusion coefficient of PEI (M_n = 600) with urea added increased twofold in comparison with that of PEI without urea added. This experiment demonstrated that urea acts as a penetration accelerator for PEI. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 65–71, 2005     

Effect of low‐temperature plasma and chitosan treatment on wool dyeing with Acid Red 27

This study examines in detail the influence of low‐temperature plasma and biopolymer chitosan treatments on wool dyeability. Wool knitted fabrics were treated and characterized by whiteness and shrink‐resistance measurements. Surface modification was assessed by contact‐angle measurements of human hair fibers, which were used as a model to study the wetting properties of the treated wool knitted fabrics. The dyeing behavior was assessed from the diffusion mechanism point of view. The dyeing kinetics were measured at two different pHs (4.2 and 6.5) and three different temperatures (60, 85, and 100°C) to gain information about the contribution of the surface modification treatment to the dyeing mechanism. The exhaustion and reflectance data were compared, and the apparent diffusion coefficients were calculated. On the basis of the obtained results, a model for the dyeing mechanism of the chitosan treated wool was proposed. When treated with chitosan, the polymer sheath spread on the surface of the fibers acted as a predominant dyeing site in very short dyeing times, thus interacting with the dye and in later stages imparting the dye to the wool fiber. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2204–2214, 2005     

Alkaline dissolution monitoring of radial‐type polyester microfiber fabrics by a cationic dye‐staining method

The alkaline dissolution behavior of radial‐type polyester microfibers during high‐temperature alkali treatment and cold‐pad batch alkali treatment was successfully monitored using a cationic dye‐staining method. The weight reduction behavior of the alkali‐treated microfiber fabrics and their staining behavior with a cationic dye were compared. In addition, the termination of dissolution monitored by both methods was confirmed by scanning electron microscopy. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 279–285, 2006     

A new method to visualize and characterize the pore structure of TENCEL® (Lyocell) and other man‐made cellulosic fibres using a fluorescent dye molecular probe

The internal porous structures of the man‐made cellulosic fibers Lyocell (TENCEL®), Modal, and Viscose fibers were visualized by applying fluorescence microscopy on fiber cross sections. The fiber pore structure was probed by the optical brightener Uvitex BHT, and the dye penetration depth was measured. The main differences in the pore structures of these three fiber types could be visualized. Only TENCEL shows a significant difference between dried and never‐dried fibers. A fiber structure model of TENCEL was obtained, which discriminates three different porous zones with respect to dye diffusion kinetics. The results are discussed in relationship with the fiber physical and chemical properties. The dye penetration depth and kinetics in TENCEL fibers was found to be sensitive to the production and treatment conditions, in particular to changes in the pore system by drying, and following alkali swelling processes. The performance of surface‐specific enzymatic peeling could also be observed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Low‐temperature plasma processing for the enhancement of surface properties and dyeability of wool fabric

In the present investigation, wool fabric was treated with a low‐temperature air plasma. The plasma discharge power and treatment time were varied. The effect of plasma treatment on various fabric properties such as wettability, wickability, dyeability, crease recovery angle, breaking strength, and elongation at break was investigated. Surface morphology was studied using SEM micrographs. The fabric became substantially hydrophilic even with a short duration of air plasma treatment of 30 s with improvement in dye uptake and in the rate of dyeing when dyed at a lower temperature. Under these treatment conditions, aging was almost nil in a dry environment, even after 45 days, whereas some aging was observed in a humid (75% relative humidity) environment. A 20% increase in the breaking strength and 24% increase in the elongation at break were observed with reduction in wrinkle recovery angle to 133–144° from 169° for untreated fabric. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43097.     

Synthesis of acid dyes containing polyetheramine moieties and their low‐temperature dyeing properties on wool fiber

To realize the low‐temperature dyeing of wool fibers, the use of auxiliaries and wool modification are common methods. Low‐temperature auxiliaries may cause water‐pollution problems, and wool modification is a costly and uncontrollable process. In this study, new acid dyes, named D1–D3, containing polyetheramine groups were synthesized and applied to wool fiber by conventional and low‐temperature exhaust dyeing procedures. The results indicate that the new acid dyes could interact with wool‐fiber‐like auxiliaries and render a high exhaustion rate to the wool fiber at a dyeing temperature of 80 °C. In comparison with Acid Blue 25, the D1–D3 dyes showed an increased dyeing rate, especially under a dyeing temperature of 80 °C. Despite the bigger relative molecular masses of D1–D3, the exhaustion rates of D1–D3 were still higher, and the times of half‐dyeing were shorter than that of Acid Blue 25. The color differences between the wool fabrics dyed with the four dyes at 80 and 98 °C, respectively, were compared. We found that the color differences of D1–D3 between 80 and 98 °C were smaller than that of Acid Blue 25. The interactions between the dyes and wool fiber were analyzed and manifested by the measurement of the ζ potential of the dyes and wool fiber. The leveling and transfer properties of the D1–D3 dyes were also investigated, and the color differences of the wool fabrics dyed with Acid Blue 25, D1, and D2 were very low at all measured pH values and temperatures. The fastnesses of D1–D3 on wool fabric were almost the same as that of Acid Blue 25. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45793.     

Linear low‐density polyethylene colored with a nanoclay‐based pigment: Morphology and mechanical,thermal, and colorimetric properties

In this study, a novel kind of hybrid pigment based on nanoclays and dyes was synthesized and characterized. These nanoclay‐based pigments (NCPs) were prepared at the laboratory with sodium montmorillonite nanoclay (NC) and methylene blue (MB). The cation‐exchange capacity of NC exchanged with MB was varied to obtain a wide color gamut. The synthesized nanopigments were thoroughly characterized. The NCPs were melt‐mixed with linear low‐density polyethylene (PE) with an internal mixer. Furthermore, samples with conventional colorants were prepared in the same way. Then, the properties (mechanical, thermal, and colorimetric) of the mixtures were assessed. The PE–NCP samples developed better color properties than those containing conventional colorants and used as references, and their other properties were maintained or improved, even at lower contents of dye compared to that with the conventional colorants. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Ultraviolet resistant/antiwrinkle finishing of cotton fabrics by sol‐gel method

Nano titanium dioxide (TiO₂) sols were prepared by sol‐gel method with tetrabutyl orthotitanate (TBOT) as precursors, citric acid (CA) as inhibitors. Ultraviolet resistant capacity of finished cotton fabrics are greatly improved with good wrinkle‐resistance, whiteness and tensile strength as well. The optimum molar ratio for preparing nano‐TiO₂ sols in this study is n[C₂H₅OH] : n[H₂O] : n[CA] : n[HCl] : n[TOBT] = 20 : 6 : 1.2 : 0.025 : 1, at ambient temperature. Particle size distribution analysis of the sol reveals that the curve is right tailed with an average diameter of 72.8 nm. Factors affecting the performance of finished cotton fabrics by TiO₂ sols, such as concentration of sodium hypophosphite (SHP), triethanolamine (TEA) in finishing bath, curing temperatures and time lengths were investigated by orthogonal experiments. The optimum finishing results can be obtained with 3% SHP, 3% TEA, curing at 165°C for 3 min. Aggregated nano‐TiO₂ particles on surfaces of finished cotton fibers both washed and unwashed were investigated by high resolution cold field emission scanning electron microscope and energy dispersive X‐ray spectrometer. Esterification crosslinking between CA and cotton fibers were also demonstrated through infrared spectra. After a five‐time's wash, ultraviolet protection factor of finished cotton fabrics with nano‐TiO₂ sols is up to 117.42 and dry crease recovery angles increase by 30.2° with slightly improved whiteness, while the breaking strength decreases by 18.8%. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Low‐temperature carrier dyeing of poly(vinyl chloride) fibers with disperse dyes

The effects of various carriers on the color yield of poly(vinyl chloride) (PVC) filaments in a disperse dyeing system were investigated. The dyeability of disperse dyes on PVC fiber was improved using appropriate carriers. The enhancement of dye uptake imparted by carriers coincided with the reduction in glass‐transition temperature, which in turn coincided approximately with the similarity of the inorganic/organic ratio values between PVC fibers and carriers. The results clearly demonstrate that hydrophobic carriers function as diluents of PVC fiber, facilitating dye diffusion by increasing segmental mobility of the fiber. The dyed PVC filaments with disperse dyes showed reasonable levels of build‐up and color fastness properties in the carrier‐assisted dyeing. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3896–3904, 2003     

Mechanism involved in the dyeing of wool with an oil‐in‐water microemulsion system

This article investigates the influence of oil‐in‐water (o/w) microemulsions, used as media for both dye solubilization and dye baths, on the dye uptake on fiber surfaces. An acetic acid solution/Synperonic L7/benzyl alcohol microemulsion system was used to solubilize a water‐insoluble antimicrobial natural dye (C.I. Natural Orange 2) and to dye wool fabric at an acidic pH. The results clearly show that the dye exhaustion on the fabric took place mainly when the temperature of the dye bath promoted a change in the molecular organization of the microemulsions with the liberation of the dye solubilized in the oil droplets of the microemulsions. Although uniformly and evenly dyed fabrics were obtained, they showed very low wash fastness. To confirm the mechanism involved and to achieve dyed fabrics with good wash‐fastness properties, two different dyeing methods were also studied. The first method was dyeing at a constant low temperature, at which the o/w microemulsion remained a monophase system; the second one was dyeing at a high temperature, at which it was transformed into a multiphase system. Both the dye exhaustion and wash fastness improved considerably for the fabrics dyed at a high temperature. Moreover, uniform and even dyeing was achieved. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Adsorption behavior of Congo red from an aqueous solution on 4‐vinyl pyridine grafted poly(ethylene terephthalate) fibers

In this study, a reactive fibrous adsorbent was prepared through the grafting of 4‐vinyl pyridine monomer onto poly(ethylene terephthalate) (PET) fibers for the removal of Congo red (CR) dye from an aqueous solution with the batch adsorption method. Effects of various parameters such as the grafting yield, pH, treatment time, and initial dye concentration on the amount of adsorption of the dye onto the reactive fibers were investigated. The effective pH was 4.0 for adsorption on grafted PET fibers. The sufficient time to attain equilibrium was 150 min. The maximum adsorption capacity of the reactive fibers for CR was 17.3 mg/g of fiber. The rates of adsorption conformed to pseudo‐second‐order kinetics with good correlation. The adsorption isotherm of CR fit a Langmuir‐type isotherm. The reactive fibers were stable and regenerable by acid and base without loss of activity. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Comparative study of the structure and properties of wool treated by a chicken‐feather keratin agent,plasma, and their combination

Wool was treated by a chicken‐feather keratin agent, plasma, and their combination. These treated wools were characterized with Fourier transform infrared spectroscopy and scanning electron microscopy. The performance properties, such as the antifelting performance, wettability, and dyeability, of these treated fibers were tested. The results show that the antifelting performance, wettability, and dyeability of the wool modified by plasma combined with the chicken‐feather keratin were improved. This joint treatment technology is an environmentally friendly green ecological finishing technique. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effects of a pretreatment with N‐methylmorpholine‐N‐oxide on the structures and properties of ramie

To improve the dyeing properties of ramie, the ecofriendly organic solvent N‐methylmorpholine‐N‐oxide (NMMO) was used to substitute sodium hydroxide as a ramie‐fiber swelling solvent. Through padding and baking pretreatment, ramie fabric was modified by an NMMO aqueous solution. Ultraviolet–visible spectrophotometry, Fourier transform infrared spectroscopy, X‐ray diffraction, and differential scanning calorimetry were used to investigate the effects of NMMO pretreatment on the structure of the ramie, whereas the color strength (K/S, where K is the light absorption coefficient and S is the scattering coefficient), adsorption isotherm, and dye uptake rate curve were measured to investigate the effects of NMMO pretreatment on the dyeing properties of the ramie. The results show that the ramie fiber experienced a limited and irreversible swelling because of the partial breakage of interhydrogen and intrahydrogen bonds of cellulose molecules in the amorphous area, but the crystal and chemical structure of the ramie fiber did not change obviously under the experimental conditions. The K/S value of the NMMO‐modified ramie fabrics dyed with reactive dyes increased by about 100%, and the dye uptake increased by 27.88% compared to that of the raw sample, whereas the standard affinity and diffusion coefficient value of the reactive dyes on the NMMO‐modified ramie fabric were higher than those of the raw ramie fabric. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of magnetic and fluorescent styrene co‐polymer nanofiber

F luorescent and magnetic poly(styrene) (PS) based random co‐polymer nanofiber was synthesized in a controlled manner via chemical polymerization in three steps. A fluorescent and magnetic nanohybrid {Fe₃O₄/Congored (CR)} was separately prepared and chemically grafted onto the epichlorohydrin (ECH) units of the random co‐polymer. Characterizations of the above synthesized polymers were done with the help of Fourier transform infrared (FTIR) spectroscopy, UV–visible spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, fluorescence emission spectroscopy, field emission scanning electron microscopy (FESEM), scanning electron microscopy (SEM), vibrating sample magnetometer (VSM) measurement, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), and gel permeation chromatography (GPC) like analytical techniques. The FESEM results indicated that after the grafting of nanohybrid onto the random co‐polymer backbone, the polymer exhibited a nanofiber like morphology. Due to the surface functionalization and encapsulation reactions, the magnetic moment value of the nanohybrid and its nanocomposites were found to be reduced. Synthesis and characterization of magnetic and fluorescent random co‐polymer based nanofiber is the primary target of the present investigation and its application is extended to the catalysis field. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42796.     

Development of new eco‐friendly options for cotton wet processing

A new approach was used to search for the optimal conditions for enzymatic scouring with an alkaline pectinase and to investigate the feasibility of performed combined bioscouring and H₂O₂ bleaching and combined bioscouring and reactive dyeing of unscoured cotton fabrics. The possibility of conducting enzymatic desizing, bioscouring, and H₂O₂ bleaching of starch‐sized cotton fabrics in a single bath was also examined. The results indicated that changes in the parameters of the bioscouring process, the types and concentrations of the treating bath components, and the sequence of the treatment and addition had pronounced effects on certain properties of the treated cotton substrates (e.g., the residual size, weight loss, wettability, yellowness and whiteness, and dyeability with reactive dyes). The optimal conditions for efficient bioscouring alone and in combination with H₂O₂ bleaching, reactive dyeing, and enzymatic desizing and H₂O₂ bleaching were determined. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1825–1836, 2004     

Tunable molecular weights of poly(triphenylamine‐2,2′‐bithiophene) and their effects on photovoltaic performance as sensitizers for dye‐sensitized solar cells

Despite the huge progress achieved over the past decade, the relationship between the molecular weights of dyes and the performance of dye‐sensitized solar cells (DSSCs) remains unclear. In this article, we report on the fine control of the number‐average molecular weight (M_n) of poly(triphenylamine‐2,2′‐bithiophene) (PPAT) dyes with cyanoacrylic acid moieties as acceptors. We found a correlation between the M_n and photovoltaic performance of these polymers when they were used for DSSC applications. In this study, three samples (PPAT‐01, PPAT‐02, and PPAT‐03) with different M_n values (M_ns = 1700, 2800, and 3500 g/mol) were prepared through the control of the polymerization time and characterized by analytical gel permeation chromatography and NMR. Under the same experimental conditions, the overall cell efficiency of the oligomer dyes showed a nonmonotonic tendency with increasing molecular weight. The power‐conversion efficiencies were 2.81% for PPAT‐01, 4.72% for PPAT‐02, and 1.88% for PPAT‐03. UV absorption measurements proved that PPAT‐03 formed aggregation, whereas PPAT‐01 and PPAT‐02 were in the monolayer state adsorbed on TiO₂. The larger aggregation decreased charge transfer; thus, poor photoelectric conversion performance was observed. Furthermore, a higher molecular weight reduced the amount of PPAT‐03 adsorbed on TiO₂, and this had a crucial effect on the performance of the cells because of the reduced photocurrent. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44182.     

Influence of chitosan posttreatment parameters on the fixation of pigment‐based inks on ink‐jet‐printed cotton fabrics

Cotton fabrics were digitally printed with pigment‐based black ink with an HP Desk‐Jet 880C printer. These ink‐jet‐printed fabrics were posttreated with chitosan samples for the fixation of the pigment‐based ink on the cotton. The influence of various parameters, including the molecular weight (MW), application method (pad–dry–cure vs pad–batch), concentration, and pH, on the degree of fixation (DF) of the pigment‐based inks was examined. The chitosan‐posttreated cotton samples were evaluated for their color strength, DF, color difference, and whiteness index values and their colorfastness properties. Chitosan samples with MWs of 150,000 and greater than 375,000 showed 100% (complete) fixation of the pigment‐based inks on the cotton fabrics. DF drastically decreased in the chitosan with an MW of less than 5000. Both the pad–dry–cure and pad–batch methods were found to be suitable for chitosan application onto ink‐jet‐printed fabrics. Chitosan with an MW of 150,000 showed 100% fixation at concentrations ranging from 0.3 to 1%. A further decrease in the concentration significantly decreased the fixation. High fixation values were achieved at acidic pH, whereas a neutral to alkaline pH resulted in poor fixation. The colorfastness properties for each parameter studied are also discussed. The posttreatment of the digitally printed cotton with chitosan was found to be very effective in fixing the pigment‐based inks. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and properties of polymerizable 1,8‐naphthalimide fluorescent dye grafted linear low‐density polyethylene

Light converting greenhouse films are novel plastic films for agriculture. In this study, 4‐methoxy‐N‐allyl‐1,8‐naphthalimide (MOANI) was grafted onto linear low‐density polyethylenes (LLDPE‐g‐MOANI) by melt reactive mixing. The effects of monomer concentration, chamber temperature, and reaction time on grafting degree were systematically studied. Evidence of the grafting reaction was determined by ¹HNMR, FTIR, UV–Vis, and fluorescence spectrometry. Dynamic rheological properties, isothermal crystallization kinetics, surface morphologies of LLDPE, LLDPE‐g‐MOANI, and blends of LLDPE and MOANI (LLDPE/MOANI) were also analyzed. In addition, mechanical and fluorescent properties of unpurified LLDPE‐g‐MOANI films were further studied after the UV condensation weathering and acceleration migration test, respectively. We demonstrated that the cross‐linking of LLDPE could be inhibited effectively by the graft of MOANI; the grafted MOANI acted as a nucleation agent to accelerate crystallization; the grafted MOANI effectively inhibited the aging process of LLDPE and the migration of free MOANI to the surface of the unpurified LLDPE‐g‐MOANI film. The modified LLDPE showed the potential application in long‐term light converting films. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42172.     

Visualization of PVDF nanofibers coated on filter paper using fluorescein silica nanoparticles

Fluorescein silica nanoparticles (NPs) were prepared using a silane compound bound between fluorescein‐N‐hydroxysuccinimide (NHS‐Fluorescein) and 3‐aminopropylorthosilicate by a sol–gel method. The fluorescein‐silica NPs were mixed with a poly(vinylidene fluoride) (PVDF) solution, and the solution loaded with the NPs was electrospun on a filter paper. Scanning electron microscopy and transmission electron microscopy images confirmed the encapsulation of the fluorescein silica NPs in the PVDF nanofibers. Laser scanning confocal microscopy (LSCM) images showed fluorescein silica NPs as dots, and photoluminescence (PL) images obtained using a fluoroanalyzer indicated the emission of uniform PL from filter papers coated with fluorescein‐silica‐NP‐encapsulated PVDF nanofibers. It was demonstrated that the fluorescein silica NPs enabled PVDF nanofibers coated on a filter paper to be easily visualized. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45125.