Kinetics for copolymerization of methyl methacrylate with N‐cyclohexylmaleimide

The kinetics for the radical copolymerization of methyl methacrylate (MMA) with N‐cyclohexylmaleimide (NCMI) was investigated. The initial copolymerization rate R_p is proportional to the initiator concentration to the power of 0.54. The apparent activation energy of the overall copolymerization was measured to be 69.0 kJ/mol. The monomer reactivity ratios were determined to be r_NCMI = 0.42 and r_MMA = 1.63. R_p reduces slightly, and the molecular weight of the resultant copolymer decreases with increasing the concentration of the chain transfer agent N‐dodecanethiol (RSH). The more the transfer agent, the narrower the molecular weight distribution of the resulting copolymer. The following chain‐transfer constant of RSH for the copolymerization of MMA with NCMI in benzene at 50°C was obtained: C_s = 0.23. The glass transition temperature (T_g) of the copolymer increases with increasing f_NCMI, which indicates that adding NCMI can improve the heat resistance of Plexiglas. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1293–1297, 1999     

Atom transfer radical copolymerization of methyl methacrylate with N‐cyclohexylmaleimide

Atom transfer radical polymerization has been applied to simultaneously copolymerize methyl methacrylate (MMA) and N‐cyclohexylmaleimide (NCMI). Molecular weight behaviour and kinetic study on the copolymerization with the CuBr/bipyridine(bpy) catalyst system in anisole indicate that MMA/NCMI copolymerization behaves in a ‘living’ fashion. The influence of several factors, such as temperature, solvent, initiator and monomer ratio, on the copolymerization were investigated. Copolymerization of MMA and NCMI in the presence of CuBr/bpy using cyclohexanone as a solvent instead of anisole displayed poor control. The monomer reactivity ratios were evaluated as r_NCMI = 0.26 and r_MMA=1.35. The glass transition temperature of the resulting copolymer increases with increasing NCMI concentration. The thermal stability of plexiglass could be improved through copolymerization with NCMI. © 2000 Society of Chemical Industry     

Studies on the copolymerization of methyl methacrylate with N‐(o/m/p‐chlorophenyl) itaconimides

The article describes the synthesis and characterization of N‐aryl itaconimide monomers such as: N‐(p‐chlorophenyl) itaconimide (PI)/N‐(m‐chlorophenyl) itaconimide (MI)/N‐(o‐chlorophenyl) itaconimide (OI) and its copolymerization behavior with MMA. The homopolymers and copolymers of N‐aryl itaconimides and methyl methacrylate (MMA, M₂) were synthesized by varying the mol fraction of N‐aryl itaconimides in the initial feed from 0.1 to 0.5 using azobisisobutyronitrile (AIBN) as an initiator and tetrahydrofuran (THF) as the solvent. Copolymer composition was determined using ¹H‐NMR spectroscopy [by taking the ratio of intensities of signals due to ? OCH₃ of MMA (δ = 3.59 ppm) and the aromatic proton (δ = 7.2–7.5 ppm) of N‐aryl itaconimides] and percent nitrogen content. The reactivity ratios were found to be r₁ = 1.33 and r₂ = 0.36 (PI‐MMA) r₁ = 1.15 and r₂ = 0.32 (MI‐MMA) and r₁ = 0.81 and r₂ = 0.35 (OI‐MMA). Molecular weight as determined using high‐performance liquid chromatography decreased with increasing mol fraction of itaconimides in copolymers. All the polymers had a polydisperstivity index in the range of 1.5–2.6.Thermal characterization was done using differential scanning calorimetry and dynamic thermogravimetry in nitrogen atmosphere. Incorporation of these N‐aryl itaconimides in PMMA backbone resulted in an improvement in glass transition temperature (T_g) and thermal stability. Percent char increased with the increase of PI/MI/OI content in the copolymers. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2078–2086, 2001     

Radical copolymerization between methyl methacrylate and N‐cyclohexylmaleimide with thiol as an inifer

N‐dodecanethiol (RSH) was found efficient to initiate the radical copolymerization of methyl methacrylate (MMA) with N‐cyclohexylmaleimide (NCMI) at 40–60°C. The initial copolymerization rate, R_p, increases respectively with increasing [RSH] and the mol fraction of NCMI in the comonomer feed, f_NCMI. The molecular weight of the copolymer decreases with increasing [RSH]. The initiator transfer constant of RSH was determined to be C_I = 0.21. The apparent activation energy of the overall copolymerization was measured to be 46.9 kJ/mol. The monomer reactivity ratios were determined to be r_NCMI = 0.32 and r_MMA = 1.35. The glass transition temperature of the copolymer increases obviously with increasing f_NCMI, which indicates that adding NCMI may improve the heat resistance of plexiglass. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1417–1423, 1999     

Free radical copolymerization of N,N‐dimethylaminoethyl methacrylate with styrene and methyl methacrylate: monomer reactivity ratios and glass transition temperatures

BACKGROUND: The properties of copolymers depend strongly on their composition; therefore in order to tailor some for specific applications, it is necessary to control their synthesis, and, in particular, to know the reactivity ratios of their constituent monomers. Free radical copolymerizations of N,N‐dimethylaminoethyl methacrylate (DMAEM) with styrene (ST) and methyl methacrylate (MMA) in toluene solution using 1‐di(tert‐butylperoxy)‐3,3,5‐trimethylcyclohexane as initiator at 70 °C were investigated. Monomer reactivity ratios were determined for low conversions using both linear and nonlinear methods. RESULTS: For the DMAEM/ST system the average values are r₁ = 0.43 and r₂ = 1.74; for the DMAEM/MMA system the average values are r₁ = 0.85 and r₂ = 0.86. The initial copolymerization rate, R_p, for DMAEM/ST sharply decreases as the content of ST in the monomer mixture increases up to 30 mol% and then attains a steady value. For the DMAEM/MMA copolymerization system the composition of the feed does not have a significant influence on R_p. The glass transition temperatures (T_g) of the copolymers were determined calorimetrically and calculated using Johnston's sequence length method. A linear dependence of T_g on copolymer composition for both systems is observed: T_g increases with increasing ST or MMA content. CONCLUSION: Copolymerization reactivity ratios enable the design of high‐conversion processes for the production of copolymers of well‐defined properties for particular applications, such as the improvement of rheological properties of lubricating mineral oils. Copyright © 2009 Society of Chemical Industry     

甲基丙烯酸甲酯-丙烯酸乙酯乳液共聚动力学研究

为了合成适于药物包衣用的甲基丙烯酸甲酯-丙烯酸乙酯(MMA-EA)共聚物胶乳,对以非离子型乳化剂OP-10为乳化剂、过硫酸钾为引发剂的MMA-EA乳液共聚动力学进行了研究。发现初期共聚速率随着乳化剂浓度、引发剂浓度和聚合温度的增加而增大,这是由于共聚物乳胶粒子平均粒径随着乳化剂、引发剂浓度和聚合温度的增加而减小,乳胶粒子数目增加所致。通过调节乳化剂、引发剂以及反应温度可以达到合适的聚合反应速率,最终合成出转化率大于95%的MMA-EA共聚乳液。     

Free radical kinetics of N‐methyl N‐vinyl acetamide polymerization at low conversions in aqueous media

N‐methyl N‐vinyl acetamide (NMNVA) monomer was polymerized at low conversions and its free radical kinetics were detailed using capillary dilatometry. The polymerizations were conducted isothermally, at 40°C using 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl) propane dihydrochloride] (ABDH) as initiator. Monomer concentration and initiator concentration ranges were 1.10–1.70 mol · L⁻¹ and 1–4 mmol · L⁻¹, respectively. The aqueous polymerization media were kept at neutral pH. The rates of polymerization (R_p) and orders of reaction with respect to NMNVA and ABDH concentrations were evaluated and the kinetic expression was found to be ideal, with R_p ∝ [NMNVA]^1.07 [ABDH]^0.61. The polymers obtained were characterized by their viscosity numbers and correlation of viscosity average molecular weights was made with the amount of ABDH initiator. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 337–341, 2001     

Copolymerization of N‐(4‐carboxyphenyl) itaconimide or N‐(4‐carboxyphenyl) itaconamic acid with methyl methacrylate

This paper describes the synthesis and characterization of N‐(4‐carboxyphenyl) itaconamic acid (CPA) and N‐(4‐carboxyphenyl) itaconimide (CPI) obtained by reacting itaconic anhydride with p‐aminobenzoic acid. Structural and thermal characterization of CPA and CPI was done using ¹H‐NMR, FTIR, and differential scanning calorimetry (DSC). Copolymerization of CPA or CPI with methyl methacrylate (MMA) in solution was carried out at 60 °C using azobisisobutyronitrile as an initiator and dimethyl acetamide or THF as solvent. Feed compositions having varying mole fractions of CPA or CPI ranging from 0.05–0.20 or 0.1–0.5 were taken to prepare copolymers. Copolymerizations were terminated at low percentage conversion. Structural characterization of copolymers was done by ¹H‐NMR and elemental analysis. Copolymer composition was determined using percentage nitrogen content. The reactivity ratios were r₁ (MMA) = 0.68 ± 0.06 and r₂ (CPI) = 0.46 ± 0.06. The intrinsic viscosity [η] was determined using an Ubbelohde suspension level viscometer. [η] decreased with increasing mole fraction of N‐(p‐carboxyphenyl) itaconimide or N‐(p‐carboxyphenyl) itaconamic acid in copolymers. Glass transition temperature and thermal stability of the copolymers were determined using DSC and thermogravimetric analysis, respectively. The glass transition temperature (T_g) as determined from DSC scans increased with increasing amounts of CPA or CPI in copolymers. A significant improvement in the char yield was observed upon copolymerization. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1909–1915, 2005     

Synthesis and characterization of terpolymer of N‐cyclohexylmaleimide,methyl methacrylate,and acrylonitrile

Terpolymers of N‐cyclohexylmaleimide, methylmethacrylate, and acrylonitrile (AN) at different AN feed content were synthesized by suspension polymerization. The thermal properties of the terpolymers such as glass transition temperature (T_g) and Vicat softening temperature (T_Vicat) were determined by torsion braid analysis and Vicat softening temperature tester, respectively. The value of T_g and T_Vicat decreased with increasing AN feed content. Thermogravimetric analyses were carried out with the results that the incorporated AN units enhanced the thermal stability of the resulting polymers and a second degradation step appeared with the addition of AN. The mechanical properties (tensile strength and impact strength) of the terpolymers were also detected and the results show that the tensile strength and impact strength of terpolymers increase with increasing AN feed content. The rheological results illustrated that the terpolymers showed rheological behavior similar to that of pseudoplastic liquid. The apparent shear viscosity decreased with the increasing of AN feed content. The flow power index n increased with increasing AN feed content. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 792–796, 2007     

Copper‐based reverse ATRP process for the controlled radical polymerization of methyl methacrylate

A series of copper‐based reverse atom transfer radical polymerizations (ATRP) were carried out for methyl methacrylate (MMA) at same conditions (in xylene, at 80°C) using N,N,N′,N′‐teramethylethylendiamine (TMEDA), N,N,N′,N′,N′‐pentamethyldiethylentriamine (PMDETA), 2‐2′‐bipyridine, and 4,4′‐Di(5‐nonyl)‐2,2′‐bipyridine as ligand, respectively. 2,2′‐azobis(isobutyronitrile) (AIBN) was used as initiator. In CuBr₂/bpy system, the polymerization is uncontrolled, because of the poor solubility of CuBr₂/bpy complex in organic phase. But in other three systems, the polymerizations represent controlled. Especially in CuBr₂/dNbpy system, the number‐average molecular weight increases linearly with monomer conversion from 4280 up to 14,700. During the whole polymerization, the polydispersities are quite low (in the range 1.07–1.10). The different results obtained from the four systems are due to the differences of ligands. From the point of molecular structure of ligands, it is very important to analyze deeply the two relations between (1) ligand and complex and (2) complex and polymerization. The different results obtained were discussed based on the steric effect and valence bond theory. The results can help us deep to understand the mechanism of ATRP. The presence of the bromine atoms as end groups of the poly(methyl methacrylate) (PMMA) obtained was determined by ¹H‐NMR spectroscopy. PMMA obtained could be used as macroinitiator to process chain‐extension reaction or block copolymerization reaction via a conventional ATRP process. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis and thermal properties of poly(methyl methacrylate)‐poly(L‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer

Poly(methyl methacrylate)‐poly(L ‐lactic acid)‐poly(methyl methacrylate) tri‐block copolymer was prepared using atom transfer radical polymerization (ATRP). The structure and properties of the copolymer were analyzed using infrared spectroscopy, gel permeation chromatography, nuclear magnetic resonance (¹H‐NMR, ¹³C‐NMR), thermogravimetry, and differential scanning calorimetry. The kinetic plot for the ATRP of methyl methacrylate using poly(L ‐lactic acid) (PLLA) as the initiator shows that the reaction time increases linearly with ln[M]₀/[M]. The results indicate that it is possible to achieve grafted chains with well‐defined molecular weights, and block copolymers with narrowed molecular weight distributions. The thermal stability of PLLA is improved by copolymerization. A new wash‐extraction method for removing copper from the ATRP has also exhibits satisfactory results. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Polymerization of methyl methacrylate at high temperature with 1‐butanethiol as chain transfer agent

The free‐radical polymerization of methyl methacrylate (MMA) at high temperature (120 to 180°C) has been studied in the presence of di‐tertiobutyle peroxide as an initiator and 1‐butanethiol as a chain transfer agent. No solvent was used, and the polymerization was run to high monomer conversion. Based on the experimental data collected with a dilatometric reactor, the features of the reaction have been pointed out. Working at high temperature with a chain transfer agent proved efficient to reduce the intensity of the gel effect and control the molecular weight obtained. At a temperature up to 170°C, however, the burn‐out of the initiator limits the final conversion, and the increase of the polymerization rate during the gel effect has been more difficult to detect and quantify. An empirical expression of the termination rate constant has been adopted to describe the autoacceleration and predict the conversion versus time curves and the average molecular weight of the polymer obtained. The mathematical model includes two adjustable parameters that have been determined as a function of the temperature and the initial concentration of the chain transfer agent. The agreement between the predicted and experimental data on conversion and molecular weight was good, while the polydispersity index was often underestimated. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1589–1599, 1999     

Synthesis and characterization of suspension terpolymer of N‐cyclohexylmaleimide,methyl methacrylate,and styrene

N‐cyclohexylmaleimide (ChMI) and styrene (St) were polymerized with methyl methacrylate (MMA) at different St feed content by suspension polymerization method. The glass transition temperatures (T_g) of the terpolymers were detected by torsional braid analysis (TBA). Two transition peaks in TBA curves of the terpolymers with a high St content illustrated that these terpolymers have a heterogeneous chain structure and the phase separation occurred. The lower transition temperature, T_g1, was assigned to the random St‐MMA components, and the higher transition temperature, T_g2, was assigned to the St‐ChMI units‐rich segments. Thermogravimetric analyses (TGA) revealed that all the terpolymers showed a two‐step degradation process. The tensile strength of the terpolymers decrease with increasing St content while the impact strength tended to increase slightly. The rheological behavior of the terpolymers was also detected. The result illustrated that the terpolymers showed rheological behavior similar to that of pseudoplastic liquid. The apparent shear viscosity decreased with the increasing of St content. All terpolymers have a higher value of flow n than the poly(MMA‐co‐ChMI). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 918–922, 2006     

Copolymerization and thermal behavior of methyl methacrylate with N‐(phenyl/p‐tolyl) itaconimides

This study describes the synthesis, characterization, and thermal behavior of copolymers of methyl methacrylate (MMA) and N‐p‐tolyl itaconimide (PTI)/N‐phenyl itaconimide (I). Homopolymerization and copolymerization of N‐(phenyl/p‐tolyl) itaconimide with MMA was carried out by use of various mole fractions of N‐aryl itaconimide in the initial feed from 0.1 to 0.5, using azobisisobutyronitrile as an initiator and tetrahydrofuran as the solvent. The copolymer composition was determined by ¹H‐NMR spectroscopy using the proton resonance signals attributed to –OCH₃ of MMA (δ = 3.5–3.8 ppm) and the aromatic protons (δ = 7.0–7.5 ppm) of N‐aryl itaconimide. The reactivity ratios of the monomers were found to be r₁ (PTI) = 1.33 ± 0.05/r₂ (MMA) = 0.24 ± 0.03 and r₁ (I) = 1.465 ± 0.035/r₂ (MMA) = 0.385 ± 0.005. The molecular weight of the copolymers decreased with increasing mole fraction of N‐aryl itaconimide in the copolymers. Glass‐transition temperature (T_g) and thermal stability of PMMA increased with increasing amounts of itaconimides in the polymer backbone. A significant increase in the percentage char yield at 700°C was observed on incorporation of a low mole fraction of N‐aryl itaconimides. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1195–1202, 2003     

Synthesis of methyl methacrylate and N‐aryl itaconimide block copolymers via atom‐transfer radical polymerization

The paper describes the synthesis of block copolymers of methyl methacrylate (MMA) and N‐aryl itaconimides using atom‐transfer radical polymerization (ATRP) via a poly(methyl methacrylate)–Cl/CuBr/bipyridine initiating system or a reverse ATRP AIBN/FeCl₃·6H₂O/PPh₃ initiating system. Poly(methyl methacrylate) (PMMA) macroinitiator, ie with a chlorine chain‐end (PMMA‐Cl), having a predetermined molecular weight (M_n = 1.27 × 10⁴ g mol^?1) and narrow polydispersity index (PDI = 1.29) was prepared using AIBN/FeCl₃·6H₂O/PPh₃, which was then used to polymerize N‐aryl itaconimides. Increase in molecular weight with little effect on polydispersity was observed on polymerization of N‐aryl itaconimides using the PMMA‐Cl/CuBr/Bpy initiating system. Only oligomeric blocks of N‐aryl itaconimides could be incorporated in the PMMA backbone. High molecular weight copolymer with a narrow PDI (1.43) could be prepared using tosyl chloride (TsCl) as an initiator and CuBr/bipyridine as catalyst when a mixture of MMA and N‐(p‐chlorophenyl) itaconimide in the molar ratio of 0.83:0.17 was used. Thermal characterization was performed using differential scanning calorimetry (DSC) and dynamic thermogravimetry. DSC traces of the block copolymers showed two shifts in base‐line in some of the block copolymers; the first transition corresponds to the glass transition temperature of PMMA and second transition corresponds to the glass transition temperature of poly(N‐aryl itaconimides). A copolymer obtained by taking a mixture of monomers ie MMA:N‐(p‐chlorophenyl) itaconimide in the molar ratio of 0.83:0.17 showed a single glass transition temperature. Copyright © 2005 Society of Chemical Industry     

Kinetic study of atom transfer radical polymerization of methyl methacrylate in ionic liquids

The kinetics of methyl methacrylate (MMA) homopolymerization performed by atom transfer radical polymerization (ATRP) is investigated in detail using ethyl‐2‐bromopropionate (EPN‐Br) as initiator, CuBr as catalyst, and pentamethyldiethylenetriamine (PMDETA) as ligand in ionic liquids (ILs) and acetonitrile. ILs in this research covered two different substitutional imidazolium cations and anions including halogen and halogen‐free ones. The typical cations include 1‐butyl‐3‐methylimidazolium, 1‐ethyl‐3‐methylimidazolium and the typical anions include bromide, tetrafluoroborate. The effects of solvents, temperature, and reaction ingredients ratios on the polymerization kinetics are all investigated in this article and the apparent energy of activation (ΔE) calculated for the ATRP of MMA in 1‐butyl‐3‐methyl‐imidazolium tetrafluoroborate is 6.95 KJ/mol. The number‐average molecular weights (M_n) increase linearly with conversion but are much higher than the theoretical values. It is probably due to the low concentration of deactivator at the early stage of polymerization and the lower bond energy of C‐Br in PMMA‐Br than that in EPN‐Br. Moreover, the catalyst is easily separated from the polymer and the regenerated catalyst is reused for more than three times. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of two‐end‐functionalized copolymer of styrene and methyl methacrylate via living radical polymerization

The random copolymers (HO‐P(St‐r‐MMA)‐COOH) of styrene (St) and methyl methacrylate (MMA) with hydroxyl group at one end and carboxyl group at another end were synthesized by nitroxide‐mediated living radical polymerization initiated by 4,4′‐azobis(4‐cyanovaleric acid) (ACVA) and 4‐hydroxyl‐2,2,6,6–tetramethylpiperidineoxyl (TEMPO‐OH). The experimental results have shown that all synthesized copolymers have narrow molecular weight distribution. The conversion of monomers and the molecular weight of copolymer increase with polymerization time. Thus, a copolymerization mechanism containing living radical polymerization is suggested. The use of this method permits the copolymer with two functional chain ends and controllable molecular weight as well as low molecular weight distribution. X‐ray photoelectron spectroscopy result shows that the synthesized copolymers can be tethered on the surface of silicon wafer through the reaction between the hydroxyl end of the copolymer and native oxide layer on the wafer. In addition, an organic/inorganic hybrid surface has achieved by treating copolymer tethered Si‐substrates with SiCl₄ vapor. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3118–3122, 2006     

Microemulsion polymerization of methyl methacrylate initiated with γ ray

Polymerization of methyl methacrylate was studied in an oil and water microemulsion stabilized with styrene 12-butinoyloxy-9-octadecenoic acid. During the polymerization the size change of the monomer-swollen particles with conversion was measured with photon correlation spectroscopy, and the hydrodynamic diameter of the final polymer latex was about 50 nm. The polymerization kinetics in this microemulsion were also investigated. The apparent plateau of the polymerization rate was observed at a low dose rate and high emulsifier content. The mechanism leading to this plateau was discussed. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2621–2626, 1999     

Synthesis and characterization of emulsion copolymer of N‐cyclohexylmaleimide and methyl methacrylate

Copolymers of N‐cyclohexylmaleimide (ChMI) and methyl methacrylate (MMA) were synthesized by the emulsion semibatch copolymerization method. The effects of the monomer mixture composition on the average molecular weight (M_n and M_w ), glass transition temperature (T_g), degradation temperature, mechanical properties, and rheological behavior of the copolymers were investigated. The results show that M_n and M_w have maximum values when the ChMI feed content was about 20% (by wt). The degradation temperature and T_g of the copolymers increase with increasing ChMI moieties in the copolymer. The mechanical properties (tensile strength and impact strength) decrease with an increasing ChMI feed content. All copolymers in the melt show pseudoplastic behavior. The flow index n increases with an increasing ChMI feed content. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1070–1075, 2002; DOI 10.1002/app.10394     

Free‐radical terpolymerization of n‐butyl acrylate/butyl methacrylate/d‐limonene

d ‐Limonene (Lim) is a renewable monoterpene derived from citrus fruit peels. We investigated it for use as part of a more sustainable polymer formulation. The bulk free‐radical terpolymerization of n‐butyl acrylate (BA)/butyl methacrylate (BMA)/Lim was carried out at 80°C with benzoyl peroxide as the initiator. The terpolymerization was studied at various initial BA/BMA/Lim molar ratios, and the products were characterized for conversion, terpolymer composition, molecular weight, and glass‐transition temperature. Lim was observed to undergo a significant degradative chain‐transfer reaction, which greatly influenced the polymerization kinetics. The rate of polymerization, final conversion, and polymer molecular weight were all significantly reduced because of the presence of Lim. Nonetheless, polymers with relatively high weight‐average molecular weights (20,000–120,000 Da) were produced. The terpolymer composition was well predicted with the reactivity ratios estimated for each of the three copolymer subsystems. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42821.