Poly(ethylene oxide)‐block‐polystyrene copolymers obtained by radical polymerization involving chain‐transfer processes

Poly(ethylene oxide)‐block‐polystyrene (PEO–PSt) block copolymers were prepared by radical polymerization of styrene in the presence of iodoacetate—terminated PEO (PEO‐I) as a macromolecular chain‐transfer agent. PEO‐I was synthesized by successively converting the OH end‐group of α‐methoxy ω‐hydroxy PEO to chloroacetate and then to the iodoacetate. The chain‐transfer constant of PEO‐I was estimated from the rate of consumption of the transfer agent versus the rate of consumption of the monomer (C_{tr, PEO‐I} = 0.23). Due to the involvement of degenerative transfer, styrene polymerization in the presence of PEO‐I displayed some of the characteristics of a controlled/‘living’ process, namely an increase in the molecular weight and decrease of polydispersity with monomer conversion. However, because of the slow consumption of PEO‐I due to its low chain‐transfer constant, this process was not a fully controlled one, as indicated by the polydispersity being higher than in a controlled polymerization process (1.65 versus < 1.5). The formation of PEO–PSt block copolymers was confirmed by the use of size‐exclusion chromatography and ¹H NMR spectroscopy. Copyright © 2004 Society of Chemical Industry     

Synthesis of alkyne‐terminated xanthate RAFT agents and their uses for the controlled radical polymerization of N‐vinylpyrrolidone and the synthesis of its block copolymer using click chemistry

Two new alkyne‐terminated xanthate reversible addition‐fragmentation chain‐transfer (RAFT) agents: (S)‐2‐(Propynyl propionate)‐(O‐ethyl xanthate) (X₃) and (S)‐2‐(Propynyl isobutyrate)‐(O‐ethyl xanthate) (X₄) were synthesized and characterized and used for the controlled radical polymerization of N‐vinylpyrrolidone (NVP). X₃ showed better chain transfer ability in the polymerization at 60°C. Molecular weight of the resulted polymer increased linearly with the increase in monomer loading. Kinetics study with X₃ showed the pseudo‐first order kinetics up to 67% monomer conversion. Molecular weight (M_n) of the resulting polymer increased linearly with the increase in the monomer conversion up to around 67%. With the increase in the monomer conversion, polydispersity of the corresponding poly(NVP)s initially decreased from 1.34 to 1.32 and then increased gradually to 1.58. Chain‐end analysis of the resulting polymer by ¹H‐NMR and FTIR showed clearly that polymerization started with radical forming out of xanthate RAFT agent. Living nature of the polymerization was also confirmed from the successful homo‐chain extension experiment and the hetero‐chain extension experiment involving synthesis of poly(NVP)‐b‐polystyrene amphiphilic diblock copolymer. Formed alkyne‐terminated poly(NVP) also allowed easy conjugation to azide‐terminated polystyrene by click chemistry to prepare well‐defined poly(NVP)‐b‐polystyrene block copolymers. Resulting polymers were characterized by GPC, ¹H‐NMR, FTIR, and thermal study. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and electro‐optical properties of novel Y‐type polyurethanes containing dioxynitrostilbene

3,4‐Di‐(2′‐hydroxyethoxy)‐4′‐nitrostilbene (2) was prepared by the reaction of 2‐iodoethanol with 3,4‐dihydroxy‐4′‐nitrostilbene. Diol 2 was condensed with 2,4‐toluenediisocyanate, 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate and 1,6‐hexamethylenediisocyanate to yield novel Y‐type polyurethanes 3–5 containing dioxynitrostilbene as a non‐linear optical (NLO)‐chromophore. Polymers 3–5 were soluble in common organic solvents, such as acetone and DMF. These polymers showed thermal stability up to 280 °C in TGA thermograms with T_g values in the range of 100–143 °C in DSC thermograms. The approximate lengths of aligned NLO‐chromophores of the polymers estimated from AFM images were around 2 nm. The SHG coefficients (d₃₃) of poled polymer films were around 4.5 × 10^?8 esu. Poled polymer films had improved temporal and long‐term thermal stability owing to the hydrogen bonding of urethane linkage and the main‐chain character of the polymer structure, which are acceptable for NLO device applications. Copyright © 2004 Society of Chemical Industry     

Controlled/living RAFT polymerization of N‐phenyl maleimide and synthesis of its block copolymers

The controlled/living radical polymerization of N‐phenyl maleimide (NPMI) was achieved using 2,2′‐azobisisobutyronitrile as the initiator and 2‐cyanopropyl‐2‐yl dithiobenzoate as the reversible addition‐fragmentation chain transfer agent at 75°C in dichloroethane/ethylene carbonate (60/40, w/w) mixed solvent. The block copolymers of polystyrene‐b‐polyNPMI and poly(n‐butyl methacrylate)‐b‐polyNPMI were successfully prepared by chain extension from dithiobenzoate‐terminated polystyrene and poly (n‐butyl methacrylate) to NPMI, respectively. The obtained NPMI‐based (co)polymers were characterized by gel permeation chromatography and ¹H‐NMR spectroscopy. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of poly(cyclohexene oxide)‐block‐polystyrene by combination of radical‐promoted cationic polymerization,atom transfer radical polymerization and click chemistry

The combination of radical‐promoted cationic polymerization, atom transfer radical polymerization (ATRP) and click chemistry was employed for the efficient preparation of poly(cyclohexene oxide)‐block‐polystyrene (PCHO‐b‐PSt). Alkyne end‐functionalized poly(cyclohexene oxide) (PCHO‐alkyne) was prepared by radical‐promoted cationic polymerization of cyclohexene oxide monomer in the presence of 1,2‐diphenyl‐2‐(2‐propynyloxy)‐1‐ethanone (B‐alkyne) and an onium salt, namely 1‐ethoxy‐2‐methylpyridinium hexafluorophosphate, as the initiating system. The B‐alkyne compound was synthesized using benzoin photoinitiator and propargyl bromide. Well‐defined bromine‐terminated polystyrene (PSt‐Br) was prepared by ATRP using 2‐oxo‐1,2‐diphenylethyl‐2‐bromopropanoate as initiator. Subsequently, the bromine chain end of PSt‐Br was converted to an azide group to obtain PSt‐N₃ by a simple nucleophilic substitution reaction. Then the coupling reaction between the azide end group in PSt‐N₃ and PCHO‐alkyne was performed with Cu(I) catalysis in order to obtain the PCHO‐b‐PSt block copolymer. The structures of all polymers were determined. Copyright © 2010 Society of Chemical Industry     

Synthesis and properties of fluoroalkyl end‐capped sulfobetaine polymers

A variety of fluoroalkyl end‐capped 3‐[N‐(3‐acrylamido)propyl‐N,N‐dimethylammonio]propanesulfonate polymers [R_F–(APDAPS)_n–R_F] were prepared by the reactions of fluoroalkanoyl peroxides with the corresponding monomer under very mild conditions. Similarly, fluoroalkyl end‐capped 2‐vinylpyridinio propane sulfonate polymer was obtained by the use of fluoroalkanoyl peroxide. These fluoroalkyl end‐capped sulfobetaine polymers exhibited a good solubility in water; however, these polymers have a poor solubility in other solvents. In particular, R_F–(APDAPS)_n–R_F polymers caused gelation in methanol, although R_F–(VPPA)_n–R_F polymer showed no gelation in methanol. R_F–(APDAPS)_n–R_F polymers were found to form the self‐assembled molecular aggregates with the aggregations of the end‐capped fluoroalkyl segments and the ionic interactions between sulfobetaine segments in aqueous solutions. On the other hand, it was suggested that R_F–2‐vinylpyridinio propane sulfonate (VPPS)_n–R_F polymer is not likely to form the self‐assemblies in aqueous solutions because of the steric hindrance of pyridiniopropyl betaine units in polymer. We also studied the surfactant properties of R_F–(APDAPS)_n–R_F and R_F–(VPPS)_n–R_F polymers compared with those of other fluoroalkyl end‐capped betaine‐type polymers such as 2‐acrylamido‐2‐methylpropanesulfonic acid polymers and 2‐(3‐acrylamidopropyldimethylammonio) ethanoate polymers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1144–1153, 2004     

Preparation and properties of core [poly(styrene‐n‐butyl acrylate)]–shell [poly(styrene–methyl methacrylate–vinyl triethoxide silane)] structured latex particles with self‐crosslinking characteristics

Structured latex particles with a slightly crosslinked poly(styrene‐n‐butyl acrylate) (PSB) core and a poly(styrene–methacrylate–vinyl triethoxide silane) (PSMV) shell were prepared by seed emulsion polymerization, and the latex particle structures were investigated with Fourier transform infrared, thermogravimetric analysis, differential scanning calorimetry, transmission electron microscopy, and dynamic light scattering. The films that were formed from the structured core (PSB)–shell (PSMV) particles under ambient conditions had good water repellency and good tensile strength in comparison with films from structured core (PSB)–shell [poly(styrene–methyl methyacrylate)] latex particles; this was attributed to the self‐crosslinking of CH₂?CH? Si(OCH₂CH₃)₃ in the outer shell structure. The relationship between the particle structure and the film properties was also investigated in this work. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1824–1830, 2006     

Influence of the comonomers (styrene and methyl acrylate) on the rate of photocrosslinking of 4‐{[‐3‐(4‐hydroxybenzylidene)‐2‐oxocyclohexylidene]methyl}‐ phenyl acrylate

[2,6‐Bis(4‐hydroxybenzylidene)cyclohexanone] (HBC) was prepared by reacting cyclohexanone and p‐hydroxybenzaldehyde in the presence of acid catalyst. Acrylated derivative of HBC, 4‐{[‐3‐(4‐hydroxybenzylidene)‐2‐oxocyclohexylidene]methyl}phenyl acrylate (HBA), was prepared by reacting HBC with acryloyl chloride in the presence of triethylamine. Copolymers of HBA with styrene (S) and methyl acrylate (MA) of different feed compositions were carried out by solution polymerization technique by using benzoyl peroxide (BPO) under nitrogen atmosphere. All monomers and polymers were characterized by using IR and NMR techniques. Reactivity ratios of the monomers present in the polymer chain were evolved by using Finnman–Ross (FR), Kelen–Tudos (KT), and extended Kelen–Tudos (ex‐KT) methods. Average values of reactivity were achieved by the following three methods: r₁ (S) = 2.36 ± 0.45 and r₂ (HBA) = 0.8 ± 0.31 for poly(S‐co‐HBA); r₁ = 1.62 ± 0.06 (MA); and r₂ = 0.12 ± 0.07 (HBA) for poly(MA‐co‐HBA). The photocrosslinking property of the polymers was done by using UV absorption spectroscopic technique. The rate of photocrosslinking was enhanced compared to that of the homopolymers, when the HBA was copolymerized with S and MA. Thermal stability and molecular weights (M_w and M_n) were determined for the polymer samples. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2494–2503, 2004     

Atom transfer radical polymerization of methylmethacrylate and styrene initiated by 3,5‐bis(perfluorobenzyloxy)benzyl 2‐bromopropanoate

The synthesis of polymethylmethacrylate (pMMA) and polystyrene (pSt) were realized with newly synthesized initiator, 3,5‐bis(perfluorobenzyloxy)benzyl 2‐bromopropanoate (FBr) in the presence of copper bromide (CuBr) and N,N,N′,N″,N″‐pentamethyl‐diethylenetriamine (PMDETA) by using atom transfer radical polymerization (ATRP). The perfluorinated aromatic group containing initiator was prepared by esterification of the (3,5‐bis[(perfluorobenzyl)oxy]‐phenyl alcohol. Both initiator and polymers were characterized by ¹H‐NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, and thermogravimetric analysis. The ATRP was supported by an increase in the molecular weight of the forming polymers and also by their monomodal molecular weight distribution. Contact angle measurements of water and ethylene glycol on films of synthesized polymers indicated higher degree of hydrophobicity than that of pure pMMA and pure pSt. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Microstructure and Microfabrication Considerations for Self‐Supported On‐Chip Ultra‐Thin Micro‐Solid Oxide Fuel Cell Membranes

La_0.6Sr_0.4Co_0.8Fe_0.2O_{3 – δ} (LSCF) has been sputtered on bare Si and Si₃N₄ and yttria‐stabilised zirconia (YSZ) thin films to investigate annealing temperature‐ and thickness‐dependent microstructure and functional properties, as well as their implications for designing failure‐resistant micro‐solid oxide fuel cell (μSOFC) membranes. The LSCF thin films crystallise in the 400–450 °C range; however, after annealing in the 600–700 °C range, cracks are observed. The formation of cracks is also thickness‐dependent. High electrical conductivity, ∼520 Scm^–1 at 600 °C, and low activation energy, ∼0.13 eV, in the 400–600 °C range, are still maintained for LSCF films as thin as 27 nm. Based on these studies, a strong correlation between microstructure and electrical conductivity has been observed and an annealing temperature‐thickness design space that is complementary to temperature‐stress design space has been proposed for designing reliable membranes using sputtered LSCF thin films. Microfabrication approaches that maintain the highest possible surface and interface quality of heterostructured membranes have been carefully examined. By taking advantage of the microstructure, microfabrication and geometrical structural considerations, we were able to successfully fabricate large‐area, self‐supported membranes. These results are also relevant to conventional or grid‐supported SOFC membranes using ultrathin nanocrystalline cathodes and μSOFCs using cathode thin films other than LSCF.     

Synthesis,properties, and self‐assembly of poly(benzyl ether)‐b‐polystyrene dendritic–linear polymers

Poly(benzyl ether)‐b‐polystyrene dendritic–linear polymers were successfully synthesized using a dendritic chloric poly(benzyl ether) (G₁‐Cl, G₂‐Cl, and G₃‐Cl) as the macroinitiator through the atom transfer radical polymerization process. The structure and properties of the resultant polymers were characterizated by gel permeation chromatography, ¹H‐NMR, Fourier transform IR, thermogravimetric analysis, and differential scanning calorimetry. It was found that the temperature, reaction time, molar ratio of the macroinitiator to styrene, and the generation number of the macroinitiator have significant effects on the molecular weights, conversion, and polydispersities of the resulting polymers. These dendritic–linear block polymers had very good solubility in common organic solvents at room temperature. The terminal group (dendritic segments) of the polymers can affect their thermal stability. These dendritic–linear polymers after self‐assembling in selective solvents (chloroform/acetone) formed core–shell micelles. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1106–1112, 2005     

Preparation of Transparent Polyimides Derived from cis‐ and trans‐Dicyclohexyl‐3,3′,4,4′‐tetracarboxylic Dianhydrides

Two series of alicyclic polyimides composed of cis‐ and trans‐dicyclohexyl‐3,3′,4,4′‐tetracarboxylic dianhydrides (DCDAs) and aromatic diamines were prepared. All cis‐polymers could be readily prepared both in a one‐step method and a two‐step method. However, a two‐step method is preferably applied in the preparation of trans‐polymers, because in a one‐step method the trans‐configuration is partially lost at higher temperatures. These polyimide solutions could be cast into tough and flexible films, which were characterized by inherent viscosity, GPC, DSC, TGA measurements, and UV‐vis spectroscopy. The glass transition temperatures (T_g's) of the polymers were in the range of 210–270°C and the 5% weight loss temperatures were around 480°C for all PIs prepared. The optical transmittances of these films were more than 80% at 350 nm for ca. 15 μm thickness.     

Synthesis and characterization of polystyrene/poly(4‐vinylpyridine) triblock copolymers by reversible addition–fragmentation chain transfer polymerization and their self‐assembled aggregates in water

Reversible addition–fragmentation chain transfer polymerization (RAFT) was developed for the controlled preparation of polystyrene (PS)/poly(4‐vinylpyridine) (P4VP) triblock copolymers. First, PS and P4VP homopolymers were prepared using dibenzyl trithiocarbonate as the chain transfer agent (CTA). Then, PS‐b‐P4VP‐b‐PS and P4VP‐b‐PS‐b‐P4VP triblock copolymers were synthesized using as macro‐CTA the obtained homopolymers PS and P4VP, respectively. The synthesized polymers had relatively narrower molecular weight distributions (M_w/M_n < 1.25), and the polymerization was controlled/living. Furthermore, the polymerization rate appeared to be lower when styrene was polymerized using P4VP as the macro‐CTA, compared with polymerizing 4‐vinylpyridine using PS as the macro‐CTA. This was attributed to the different transfer constants of the P4VP and PS macro‐CTAs to the styrene and the 4‐vinylpyridine, respectively. The aggregates of the triblock copolymers with different compositions and chain architectures in water also were investigated, and the results are presented. Reducing the P4VP block length and keeping the PS block constant favored the formation of rod aggregates. Moreover, the chain architecture in which the P4VP block was in the middle of the copolymer chain was rather favorable to the rod assembly because of the entropic penalty associated with the looping of the middle‐block P4VP to form the aggregate corona and tailing of the end‐block PS into the core of the aggregates. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1017–1025, 2003     

Organosoluble and light‐colored fluorinated polyimides based on 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]propane and aromatic dianhydrides

A novel fluorinated diamine monomer, 2,2‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]propane (2), was prepared through the nucleophilic substitution reaction of 2‐chloro‐5‐nitrobenzotrifluoride with 2,2‐bis(4‐hydroxyphenyl)propane in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. Polyimides were synthesized from diamine 2 and various aromatic dianhydrides 3a–f via thermal imidization. These polymers had inherent viscosities ranging from 0.73 to 1.29 dL/g. Polyimides 5a–f were soluble in amide polar solvents and even in less polar solvents. These films had tensile strengths of 87–100 MPa, elongations to break of 8–29%, and initial moduli of 1.7–2.2 GPa. The glass transition temperatures (T_g) of 5a–f were in the range of 222–271°C, and the 10% weight loss temperatures (T₁₀) of them were all above 493°C. Compared with polyimides 6 series based on 2,2‐bis[4‐(4‐aminophenoxy)phenyl]propane (BAPP) and polyimides 7 based on 2,2‐Bis[4‐(4‐aminophenoxy)phenyl]hexafluoropropane (6FBAPP), the 5 series showed better solubility and lower color intensity, dielectric constant, and lower moisture absorption. Their films had cutoff wavelengths between 363 and 404 nm, b* values ranging from 8 to 62, dielectric constants of 2.68–3.16 (1 MHz), and moisture absorptions in the range of 0.04–0.35 wt %. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 922–935, 2005     

Synthesis of new ionic crosslinked polymer hydrogel combining polystyrene and poly(4‐vinyl pyridine) and its self‐healing through a reshuffling reaction of the trithiocarbonate moiety under irradiation of ultraviolet light

A new ionic crosslinked polymer hydrogel was achieved by the strategy of ionically crosslinking α,ω‐dibromide terminated polystyrene (Br‐PS‐Br) with poly(4‐vinyl pyridine) (P4VP) which was synthesized by reversible addition‐fragmentation chain transfer polymerization using a chain transfer agent containing a trithiocarbonate moiety. The moiety of trithiocarbonate was introduced into the crosslinked network to show the self‐healing characteristics. The chain structure and components of Br‐PS‐Br and P4VP were characterized through ¹H NMR, gel permeation chromatography, Fourier transform IR spectroscopy and elemental analysis. The P4VP (M_n = 25 300 g mol^?1) chains were crosslinked with Br‐PS‐Br (M_n = 2000 g mol^?1) through the quaternization reaction to form a polymer network which was further crosslinked in acetonitrile by irradiation of UV light to fabricate a hydrogel. Such a hydrogel of P4VP/Br‐PS‐Br cut by a razor blade can be rapidly (1 h) and repeatedly (three times) healed through a reshuffling reaction of the trithiocarbonate moiety under irradiation by UV light. © 2018 Society of Chemical Industry     

Polystyrene‐block‐polylactide obtained by the combination of atom transfer radical polymerization and ring‐opening polymerization with a commercial dual initiator

A polystyrene (PS)‐b‐polylactide (PLA) block copolymer was prepared from the combination of atom transfer radical polymerization and ring‐opening polymerization with commercially available 2,2,2‐tribromoethanol as a dual initiator in a sequential two‐step procedure. Hydroxyl‐terminated polystyrene (PS‐OH)s with various molecular weights were first prepared with polydispersity indices lower than 1.3; these provided valuable macroinitiators for the polymerization of D,L ‐lactide. A block copolymer with a composition allowing the formation of hexagonally packed PLA cylinders in a PS matrix was then obtained. The PS‐b‐PLA thin films revealed, after vapor solvent annealing, a hexagonally packed organization of the PLA cylinders, which was oriented perpendicularly to the surface of the film. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of block comb‐like copolymers P(A‐MPEO)‐block‐PSt

Amphiphilic block comb‐shaped copolymers, poly[poly(ethylene oxide) methyl ether acrylate]‐block‐polystyrene [P(A‐MPEO)‐block‐PSt] with PSt as a handle, were successfully synthesized via a macromonomer technique. The reaction of MPEO with acryloyl chloride yielded a macromonomer, A‐MPEO. The macroinitiator PSt capped with the dithiobenzoate group (PSt‐SC(S)Ph) was prepared by reversible addition–fragmentation transfer (RAFT) polymerization of styrene in the presence of benzyl dithiobenzoate, and used as macroinitiator in the controlled radical block copolymerization of A‐MPEO at room temperature under ⁶⁰Co irradiation. After the unreacted macromonomer A‐MPEO had been removed by washing with hot saturated saline water, block comb‐shaped copolymers were obtained. Their structure was characterized by ¹H NMR spectroscopy and gel permeation chromatography. The phase transition and self‐assembling behaviour were investigated by atomic force microscope and differential scanning calorimetry. Copyright © 2004 Society of Chemical Industry     

Dewetting and microphase separation in symmetric polystyrene‐block‐polyisoprene diblock copolymer ultrathin films

The kinetics of surface structure evolution in ultrathin films of low‐molecular‐weight polystyrene‐block‐polyisoprene (M_w: 7300 g mol^?1–7300 g mol^?1) diblock copolymer at temperatures below the bulk order‐to‐disorder transition temperature are presented. Films with two different thicknesses were studied as a function of annealing temperature using atomic force microscopy. These film thicknesses enabled the investigation of the competition between microphase separation and dewetting that resulted in two different morphologies: long‐range bicontinuous structures and random holes. Three distinctive stages of structure evolution were observed in bicontinuous structure, with the underlying mechanism compared with spinodal dewetting. Thicker films presented holes on their surfaces upon annealing at elevated temperatures, and kinetics of formation of the holes were discussed. We found that the molecular mobility determined the rates of dewetting, while the microphase separation hardly affected the dewetting process. © 2015 Society of Chemical Industry     

Synthesis of multi‐arm star polystyrene with hyperbranched polyester initiators by atom transfer radical polymerization

Multi‐arm star polystyrenes with hyperbranched polyester (HP3) core were prepared by atom transfer radical polymerization (ATRP). The structures of the polymers were investigated with FTIR and ¹H NMR. GPC results showed that the resultant polymers had relatively broad polydispersity indices that arouse from the macromolecular initiator (HP3‐Br). The thermal properties were studied using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). DSC analysis indicated that polystyrene star polymers had only the glass transition temperatures (T_g), which changes with the weight ratio of multi‐functional macroinitiator‐to‐monomer. In addition, these star polymers could form the spherical micelles in the selected solvent (THF/n‐hexane). © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 728–733, 2006     

Synthesis of 1,3‐benzodioxole end‐functionalized polymers via reversible addition–fragmentation chain transfer polymerization

Reversible addition–fragmentation chain transfer (RAFT) polymerization of styrene was carried out in the presence of a novel RAFT reagent, bearing 1,3‐benzodioxole group, benzo [1,3]dioxole‐5‐carbodithioic acid benzo [1,3]dioxol‐5‐ylmethyl ester (BDCB), to prepare end‐functionalized polystyrene. The polymerization results showed that RAFT polymerization of styrene could be well controlled. Number–average molecular weight (M_n(GPC)) increased linearly with monomer conversion, and molecular weight distributions were narrow (M_w/M_n < 1.4). The successful reaction of chain extension and analysis of ¹H NMR spectra confirmed the existence of the functional 1,3‐benzodioxole group at the chain‐end of polystyrene. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3535–3539, 2006